Namespace is not shwon correctly

Hi all,
I have a scenario RFC -> XI Webservice. Where the request structure of the We service contains elements from the two different namespaces as shown below:
I have created the a namespace ns1 and the corresponding data types in it. And then i created a complex data type in the name space ns2 which makes use of these data types. Then this Data type is being used by a message type in the namespace ns2 where i have changed the target XML namespace as required by the Webservice.
Now the problem i have is that i want to retain the namespace for intermediate data types as ns1 itself. I don't want them to get overwritten. Can any body please suggest me the reason here?
This is what i get:
<ns1:StartNotification xmlns:ns1="http://xml.avaya.com/diamond/schema/2007/07/NotificationAndResponseService">
<sessionId>AAAAABDxRus=7IWOIg==-_2_1</sessionId>
<originator>
<requesterUniqueId>tcsuser8</requesterUniqueId>
<emailResponseMode>none</emailResponseMode>
<emailAddress><value/></emailAddress>
</originator>
<recipientList>
<recipient>
<recipientName>tcsuser8</recipientName>
<role>participant</role>
<contextKeyword/><preferredLang/><timezone/>
<displayName>tcsuser8</displayName>
Expected:
<StartNotification xmlns="http://xml.avaya.com/diamond/schema/2007/07/NotificationAndResponseService">
            <sessionId>AAAAABDxRtg=7IWI7Q==-_2_1</sessionId>
            <originator>
                        <ns1:requesterUniqueId xmlns:ns1="http://xml.avaya.com/diamond/schema/2007/07/external-common">tcsuser1</ns1:requesterUniqueId>
                        <ns2:emailResponseMode xmlns:ns2="http://xml.avaya.com/diamond/schema/2007/07/external-common">none</ns2:emailResponseMode>
            </originator>
            <recipientList authenticate="false" cancelPreviousPerson="false">
                        <ns3:recipient type="internal" xmlns:ns3="http://xml.avaya.com/diamond/schema/2007/07/external-common">
                                    <ns3:recipientName>tcsuser1</ns3:recipientName>
                                    <ns3:role>participant</ns3:role>
                                    <ns3:displayName>tcsuser1</ns3:displayName>
Thanks and best regards,
Kulwant

This is not possible.
You have to create the WSDL with an external tool and upload to PI.
Regards
Stefan

Similar Messages

International Characters in PDF Forms are not shown correctly (Adobe Reader 11.0.06)

I have a PDF form served from a web application and shown in Internet Explorer and want to put in string values with norwegian letter like 'ÅRE ØRE ÆRE'.
These are not shwon correctly when I toggle "Highlight Existing Fields" and the focus is not on the text field in question.
I am runing on Windows 7.

I cannot reproduce this using a test form I created: https://files.acrobat.com/a/preview/e6b390e1-625c-4f59-86c5-c2ca07998279
Does the same thing happen with the form above? If not, can you share your form with us: http://forums.adobe.com/thread/1408375

MFL: The dependency is not configured in schema resource. Possible reason one or more import/include is not set   correctly.

HI Friends,
I have a created a MFL to transform XML to Non XML format. When am generating a XSD out of this MFL am getting this Error:
The dependency is not configured in schema resource. Possible reason one or more import/include is not set
correctly.
Here is the snippet of the XSD:
<?xml version="1.0" encoding="UTF-8"?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
          xmlns="http://www.w3.org/2001/XMLSchema"
          targetNamespace=""
          xmlns:mfl="http://www.bea.com/mfl"
          elementFormDefault="qualified">
    <xsd:import namespace="http://www.bea.com/mfl"/>........
Later Part i have searched for mfl.xsd in com.bea.wli.core.mflengine_1.x.x.x.jar in my.........../Oracle_OSB1/modules and imorted this XSD into my eclipse workspace.
Then i added the schemalocation attribute to the Import element. which looks something like below:
<?xml version="1.0" encoding="UTF-8"?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
          xmlns="http://www.w3.org/2001/XMLSchema"
          targetNamespace=""
          xmlns:mfl="http://www.bea.com/mfl"
          elementFormDefault="qualified">
    <xsd:import namespace="http://www.bea.com/mfl" schemaLocation="../../mfl.xsd" />......
After doing these changes also am getting the same error... can anyone help me out of this????

Hi Arun,
Also in SB console we can refer xsds from other projects but again OEPE doesnt seem to support that we will have to make duplicate copies of the resources in each project.It is not like that if you are using OEPE then you can not refer resources from other projects. Just what you need to do is that give relative path of the resource which is there in the file system. It does not matter that to which project it belongs. Yes, now with OEPE, you have to do this manually.
Regards,
Anuj

Exchange 2013 - 2007 coexistence - activesync 2007 does not work correctly

Exchange 2013 SP1. On going Saga- Last night we cut over to full co-existence with DNS changes for use of legacy namespace and had to roll back again. We had only two issues but one was considered a show stopper.
The main issue was that Active Sync would not work correctly for 2007 users. It failed the exchange connectivity test and would only work on a device if the domain was entered - or if the legacy namespace was entered manually. That would have meant
chaos for several thousand users so we rolled back. (It worked perfectly for 2013 users).
The error given by the test was "foldersync failed" when I drilled down into the detail. It found autodiscover but failed after the initial handshake. (All other tests passed for 2007 and 2013 users)
We tried:
1. Populating both Autodisover internal and external urls with the legacy namespace
2. Populating only the internal url and leaving the external blank (both 1 and 2 had the same result)
3. Leaving both URLs blank to force 2013 to proxy to the 2007 cas (totally broke it- would not resolve at all)
I don't know if this is related but SSO is failing for 2007 OWA - two prompts.
Environment notes- all internal co-existence is working and the internal LTM F5's are working. Externally we use 2 GTM F5 to the LTM f5's to Ex2013. 2007 has SSL being passed through all the way to the CAS. Servers are split into CAS and MBX over 2 DC's.
Everything else externally was working when we cut over.
any and all help appreciated
Tony

Hi,
Glad to know that you have found the solution.
Thanks for your generous sharing.
Have a nice day : )
Thanks
Mavis
Mavis Huang
TechNet Community Support

XSLT not working correctly in BPEL

Hi,
We are using XSLT to remove namespaces from our XSL. When testing this XSL in Jdeveloper, it works fine. But when we using it in BPEL, the transformation is not working correctly.
Please find below the XSL content
+<xsl:stylesheet version="1.0"+
xmlns:xref="http://www.oracle.com/XSL/Transform/java/oracle.tip.xref.xpath.XRefXPathFunctions"
xmlns:xp20="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.Xpath20"
xmlns:bpws="http://schemas.xmlsoap.org/ws/2003/03/business-process/"
xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
xmlns:ora="http://schemas.oracle.com/xpath/extension"                xmlns:ehdr="http://www.oracle.com/XSL/Transform/java/oracle.tip.esb.server.headers.ESBHeaderFunctions"+
xmlns:orcl="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.ExtFunc"
xmlns:ids="http://xmlns.oracle.com/bpel/services/IdentityService/xpath"
xmlns:hwf="http://xmlns.oracle.com/bpel/workflow/xpath"
exclude-result-prefixes="xsl xref xp20 bpws ora ehdr orcl ids hwf">
+<xsl:template match="comment()|processing-instruction()|/">+
+<xsl:copy>+
+<xsl:apply-templates/>+
+</xsl:copy>+
+</xsl:template>+
+<xsl:template match="*">+
+<xsl:element name="{local-name()}">+
+<xsl:apply-templates select="@* | node()"/>+
+</xsl:element>+
+</xsl:template>+
+<xsl:template match="@*">+
          +<xsl:choose>+
               +<xsl:when test="name() != 'xmlns'">+
                    +<xsl:attribute name="{local-name()}">+
                         +<xsl:value-of select="."/>+
                    +</xsl:attribute>+
               +</xsl:when>+
          +</xsl:choose>+
+</xsl:template>+
+</xsl:stylesheet>+
The BPEL code of the transform is:
+<assign name="Transform_1">+
+<bpelx:annotation>+
+<bpelx:pattern>transformation</bpelx:pattern>+
+</bpelx:annotation>+
+<copy>+
+<from expression="ora:processXSLT('Transformation_1.xsl',bpws:getVariableData('inputVariable','payload'))"/>+
+<to variable="TempVar" part="payload" query="/ns1:mthReplacement_input"/>+
+</copy>+
+</assign>+
Not sure why the transformation isnt working in BPEL. Has anyone faced similar issues? Please share your experiences.
Thanks
John

Hi John ,
We have tried this instead of writing new code in the xslt , pls do the following
1.Open the xslt in jdev.
2.Remove the attribute exclude-result-prefixes for the element xsl:stylesheet.
3.Your new XSLT file should look like below,
<xsl:stylesheet version="1.0"
xmlns:xref="http://www.oracle.com/XSL/Transform/java/oracle.tip.xref.xpath.XRefXPathFunctions"
xmlns:xp20="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.Xpath20"
xmlns:bpws="http://schemas.xmlsoap.org/ws/2003/03/business-process/"
xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
+xmlns:ora="http://schemas.oracle.com/xpath/extension" xmlns:ehdr="http://www.oracle.com/XSL/Transform/java/oracle.tip.esb.server.headers.ESBHeaderFunctions"
xmlns:orcl="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.ExtFunc"
xmlns:ids="http://xmlns.oracle.com/bpel/services/IdentityService/xpath"
xmlns:hwf="http://xmlns.oracle.com/bpel/workflow/xpath"
>
....business logic...
</xsl:stylesheet>
4.Compile and deploy your BPEL Process.
5.You should not see any namespaces in the BPEL Console now for this xslt.
Thank you.
Regards
Venkat.

Sorting not working correctly for date field in alv report

Hi All,
My report displays many rows also containing date type fields of bldat,budat .
When I sort the report selecting field of type bldat budat the sorting is not correct for the year.
Ex:
Invoice doc dat
01-25-2011
01-21-2011
02-02-2011
10-25-2010
11-20-2010
If I use ascending then it is sorted as :
Invoice doc dat
01-21-2011
01-25-2011
02-02-2011
10-20-2010
10-25-2010
Why the sorting is not working correct for year.(2010 records should have been first).
The field wa_tab-bldat is of type char10.
It is populated as wa_tab-bldat = bsak-bldat.
Kindly suggest what can be done.

The field wa_tab-bldat is of type char10
Then what it does is correct.
Refer to type datum...it will work

10g exporting to CSV using client_text_io is not working correctly.

I have an odd issue which i could do with some help with. I run an function that exports to CSV based on an pre defined record group.
This has been working fine for many months with various customers. Recently a new customer used it and they have 28k rows in his record group and the export is actually not exporting correctly.
The record group has a record count of 28331.
The CSV produced has only 3756 in my CSV file. These are the last 3756 records in the Record group so its as if its overwriting the data as it goes yet all smaller datasets work
FUNCTION fun_export_csv (vgraphid NUMBER, p_filename VARCHAR2)RETURN BOOLEAN IS
out_file                     client_text_io.file_type;
     i                                             NUMBER;
lv_line              VARCHAR2(5000);
BEGIN
rg:=populate_group('RG11_EXP');
synchronize;
lv_line:= ('"GIN","Gin Date","PO Num","PO Required Date","Mat Num","Mat Description","Supplier Part No","On Time Delivery(Yes-1, No-0)"');
client_text_io.put(out_file, lv_line);
client_text_io.new_line(out_file,1);
For i in 1..get_group_row_count('RG11_EXP') Loop--this count is 28331
lv_line:= ('"'||get_group_number_cell('RG11_EXP.col1', i )                ||'"'|| ',' ||'"'||
     get_group_date_cell('RG11_EXP.grn_date', i )                ||'"'|| ',' ||'"'||
     get_group_number_cell('RG11_EXP.po', i )      ||'"'|| ',' ||'"'||
     get_group_date_cell('RG11_EXP.daterqd', i ) ||'"'|| ',' ||'"'||
     get_group_char_cell('RG11_EXP.item_no', i ) ||'"'|| ',' ||'"'||
     get_group_char_cell('RG11_EXP.desc', i )                    ||'"'|| ',' ||'"'||
     get_group_char_cell('RG11_EXP.part_no', i )               ||'"'|| ',' ||'"'||
     get_group_number_cell('RG11_EXP.ontime', i )                    ||'"');
client_text_io.put(out_file, lv_line);
client_text_io.new_line(out_file,1);
END LOOP;
client_text_io.FCLOSE(out_file);
RETURN TRUE;

Hello,
Try to insert a "synchronize" instruction from time to time:
i pls_integer := 1;
Loop
If mod(i, 500) = 0 Then
     synchronize;
End if ;
i := i + 1 ;
End loop;
...<p>But keep in mind the the CLIENT_TEXT_IO generate a lot of network traffic, so it is better and faster to generate the file on the A.S., then after transfer it to the client machine.</p>
Francois

Microsoft Outlook 2010 The delegates settings were not saved correctly. Cannot activate Send-on-behalf-of list. You do not have sufficient permission to perform this operation on this object.

I am trying to assign delegation to a user and I receive the following message.
The delegates settings were not saved correctly. Cannot activate Send-on-behalf-of list. You do not have sufficient permission to perform this operation on this object.
We are using 2010 for the server and client. There are only specific mailboxes that this is happening for after being migrated from Lotus Notes. The user can use their mailfile fine however it is just the delegation that appears corrupted somehow.
I'm not sure how to fix this. I have checked the access through the security tab in ad and that looks fine.
Any help would be appreciated.

I did some more digging and I solved it.
This would be the solution:
In Active Directory Users and Computers
-Click on VIEW
-Click on ADVANCE FEATURES (this is important otherwise you won't see
the complete list in the next steps)
-Click on the USERS container
-Find the problem user's account
-Right mouse the account and click on PROPERTIES
-Click on the SECURITY tab
-In the top box, click on the SELF account
-In the bottom portion of the screen make sure the READ PERSONAL
INFORMATION & WRITE PERSONAL INFORMATION should both be checked for
ALLOW
If you can compare the permissions for 'SELF' with another user you probably should set them accordingly to be safe. I noticed that for the user where setting delegates (SOB) did
not work, more than those 2 permissions were missing.
Good luck!
David

Some fonts are not shown correctly in LabVIEW 2012

I found a bug related with fonts in LabVIEW2012 f3 KR.
- When I select NI7SEG in font selection dialog, right font is not shown in the example box.
- Draw text at point.vi shows same problem for some fonts while other fonts are working.
I reported it to Korean NI. As far as I know, this was not reported in previous versions and I couldn't find any related documents in Google.
So, here I would like to know whether it is related with only Korean version. Please let me know if English version is OK.
* OS: Windows 7 32bit KR

Just now, I installed LabVIEW 2012 f3 (32-bit, English) and checked for the issue. But the font(NI7SEG) was not shown properly in VI either.
- Both of Korea and English version of LabVIEW 2012 on Win 7 Korea OS shows wrong results. It is same on 64-bit OS.
- LabVIEW 2010 but on same PC shows correct fonts.
Is there a limit of number of fonts in LabVIEW? There are more than 100 fonts are shown in the "Selection Font" dialog and I can divide them into 3 groups by sequential order. I find that all fonts in the 3rd group are not applied correctly.
(1st group)
Arial Unicode MS...
Bookshelf Symbol 3....
Windings 3
(2nd group)
@Arial Unicode MS...
@Terminal
(3rd group)
Arial...
Consolas...
Courier...
Licida Console...
NI7SEG...
Verdana

Umlauts are not displayed correctly in different programs

Hello!
I live in germany, but my locale is set to "en_US.UTF8" because I like to have everything in english.
I do not have any problems with umlauts on the machine, but when I connect with sFTP oder Samba to it, the umlauts in files are not displayed correctly.
Look at this example
The upper word is how it looks in "ssh putty" (=locally on the machine), the bottom one is from "filezilla" (from my windows host)
This is my locale
locale
LANG=en_US.UTF-8
LC_CTYPE="en_US.UTF-8"
LC_NUMERIC="en_US.UTF-8"
LC_TIME="en_US.UTF-8"
LC_COLLATE="en_US.UTF-8"
LC_MONETARY="en_US.UTF-8"
LC_MESSAGES="en_US.UTF-8"
LC_PAPER="en_US.UTF-8"
LC_NAME="en_US.UTF-8"
LC_ADDRESS="en_US.UTF-8"
LC_TELEPHONE="en_US.UTF-8"
LC_MEASUREMENT="en_US.UTF-8"
LC_IDENTIFICATION="en_US.UTF-8"
LC_ALL=
When I create a file "asd_aöü" locally on the machine (with the help of ssh - putty), it looks fine, but when I connect by samba or filezilla again the umlauts are not displayed correctly.
Do you understand my problem? What can I do?
Thanks!
Last edited by cyberius (2011-02-19 10:12:19)

Did you check the locale settings on your Windows machine?

Hyperlinks not saved correctly in PDF and Excel

Hi,
I have a few reports with hyperlinks to other reports that contain multiple input parameters, which makes the links very long. ( greater than 400 characters )
When the reports are saved as excel, I am unable to invoke the child report on clicking the link as the link is not saved entirely ( can see that when i try to edit the hyperlink in excel ). Therefore the child report opens but prompts for inputs as not all the inputs are passed
When saved as pdf, the link is not saved correctly and i cannot invoke the child report at all
Please can you suggest a solution/workaround? Alternately is it possible to disable the hyperlinks when saved as excel/pdf?
Regards
Sameer

Hello,
I think this is a limitation in Excel where URL syntax has to be 255 characters or less
In order to prove that it's coming from excel and not BO, try in excel to create a false hyperlink which contains more than 255 characters.
A workaround might be to modify the cell as text and will not be recognized as a URL. So you should get it entirely.
Please let me know if it helps you
Regards,
Philippe

Non-English fonts not rendering correctly in iMovie 10.0.3?

I use xenotype Tibetan font in iMovie and it has always rendered correctly until I updated from 10.0.2 to 10.0.3. Now many of the stacked characters do not render correctly in any of the titles. Even projects that I made three months ago with 10.0.2 when opened in the new version render the font incorrectly. Is there a reason for this change? Is there any adjustment I can do? Line-height adjustment? iMovie 10.0.3 seems to be the only Mac software currently made by apple that doesn't render the font correctly.

Hello,
Welcome to the discussions. There have been some transition problems reported, although maybe not so many problems as you are experiencing.
I had the black/flash with the transition cross-dissolve in one of my movies recently. I found the suggestions in this thread to resolve that: http://discussions.apple.com/message.jspa?messageID=3842119#3842119
Have a look and see if it can help you.

In PDF to Excel conversion dates like 03/12/15 convert to Dec 3rd 2015 not the correct date of Mar 12th 2015 whereas date 03/13/2015 converts correctly as March 13th 2015

In PDF to Excel conversion dates like 03/12/15 convert to Dec 3rd 2015 not the correct date of Mar 12th 2015 whereas date 03/13/2015 converts correctly as March 13th 2015

Hi DirTech,
Are both of these dates in the same Excel file? If they're in different files, are you choosing the same language for OCR (optical character recognition)?
If they are in the same PDF file, how was that PDF file created? Was it created from a third-party application (rather than an Adobe application)? If it was created by a third-party application, it could be that it wasn't written to spec, and that's why you're seeing some oddities in the PDF > Excel conversion. (See Will Adobe ExportPDF convert both text and form... | Adobe Community.)
Best,
Sara

Date can not display correctly in excel from .jsp

Hi,
I create a .jsp report to export the data to excel. the report run OK, except the date field can not display correctly.
for example in database :start date ='01-oct-2003'
in the except it displays to 02/06/02.
It seem all the date field can not be control in the report, and control by somthing else
Doese anyone come accross this problem?
Thanks

Hi Rong,
Are you using the following demonstration to build your JSP?
http://otn.oracle.com/products/reports/htdocs/getstart/demonstrations/index.html
(Output to Excel with Oracle9i Report)
I tried to do the same, and inserted a database date field in the JSP using Reports. I found the following:
While making the template inside Excel, if I make sure that the format of the date cells is "Date" - some particular date format, the date field values from Reports does not get exported correctly.
However, if you make sure that inside the template, the format of the date cells is not date, but "General", then the date field values are correctly exported to Excel.
Pl try it and let us know.
Navneet.

BKI0008E: The environment variable BI_CALLER is not set correctely. The cur

Hi All,
I have configured backint for backup of maxdb for content server 640. I configured it as per the documents available, created the configuration fiale and the parameter file. Created the backup medium in dbmgui.
Now when i try to run the backup using the pipe am getting the above mentioned error.
Please find below the dbm.ebp log for the same...
more dbm.ebp
2009-10-22 02:06:08
Setting environment variable 'TEMP' for the directory for temporary files and pi
pes to default ''.
Setting environment variable 'TMP' for the directory for temporary files and pip
es to default ''.
Using connection to Backint for MaxDB Interface.
2009-10-22 02:06:08
Checking existence and configuration of Backint for MaxDB.
    Using configuration variable 'BSI_ENV' = '/sapdb/CFC/lcbackup/apoatlas.env'
as path of the configuration file of Backint for MaxDB.
    Setting environment variable 'BSI_ENV' for the path of the configuration fil
e of Backint for MaxDB to configuration value '/sapdb/CFC/lcbackup/apoatlas.env'
    Reading the Backint for MaxDB configuration file '/sapdb/CFC/lcbackup/apoatl
as.env'.
        Found keyword 'BACKINT' with value '/sapdb/CFC/db/bin/backint'.
        Found keyword 'INPUT' with value '/tmp/backint4sapdbCFC.in'.
        Found keyword 'OUTPUT' with value '/tmp/backint4sapdbCFC.out'.
        Found keyword 'ERROROUTPUT' with value '/tmp/backint4sapdbCFC.err'.
        Found keyword 'PARAMETERFILE' with value '/sapdb/CFC/lcbackup/param.cfg'
        Found keyword 'TIMEOUT_SUCCESS' with value '1800'.
        Found keyword 'TIMEOUT_FAILURE' with value '1800'.
    Finished reading of the Backint for MaxDB configuration file.
    Using '/sapdb/CFC/db/bin/backint' as Backint for MaxDB program.
    Using '/tmp/backint4sapdbCFC.in' as input file for Backint for MaxDB.
    Using '/tmp/backint4sapdbCFC.out' as output file for Backint for MaxDB.
    Using '/tmp/backint4sapdbCFC.err' as error output file for Backint for MaxDB
    Using '/sapdb/CFC/lcbackup/param.cfg' as parameter file for Backint for MaxD
B.
    Using '1800' seconds as timeout for Backint for MaxDB in the case of success
    Using '1800' seconds as timeout for Backint for MaxDB in the case of failure
    Using '/sapdb/data/wrk/CFC/dbm.knl' as backup history of a database to migra
te.
    Using '/sapdb/data/wrk/CFC/dbm.ebf' as external backup history of a database
to migrate.
    Checking availability of backups using backint's inquire function.
Check passed successful.
2009-10-22 02:06:08
Checking medium.
Check passed successfully.
2009-10-22 02:06:08
Preparing backup.
    Setting environment variable 'BI_CALLER' to value 'DBMSRV'.
    Setting environment variable 'BI_REQUEST' to value 'NEW'.
    Setting environment variable 'BI_BACKUP' to value 'FULL'.
    Constructed Backint for MaxDB call '/sapdb/CFC/db/bin/backint -u CFC -f back
up -t file -p /sapdb/CFC/lcbackup/param.cfg -i /tmp/backint4sapdbCFC.in -c'.
    Created temporary file '/tmp/backint4sapdbCFC.out' as output for Backint for
MaxDB.
    Created temporary file '/tmp/backint4sapdbCFC.err' as error output for Backi
nt for MaxDB.
    Writing '/sapdb/CFC/lcbackup/pipe1 #PIPE' to the input file.
    Writing '/sapdb/CFC/lcbackup/pipe2 #PIPE' to the input file.
Prepare passed successfully.
2009-10-22 02:06:08
Creating pipes for data transfer.
    Creating pipe '/sapdb/CFC/lcbackup/pipe1' ... Done.
    Creating pipe '/sapdb/CFC/lcbackup/pipe2' ... Done.
All data transfer pipes have been created.
2009-10-22 02:06:08
Starting database action for the backup.
    Requesting 'SAVE DATA QUICK TO '/sapdb/CFC/lcbackup/pipe1' PIPE,'/sapdb/CFC/
lcbackup/pipe2' PIPE BLOCKSIZE 8 NO CHECKPOINT MEDIANAME 'BACKINT_ONLINE1'' from
db-kernel.
The database is working on the request.
2009-10-22 02:06:09
Waiting until database has prepared the backup.
    Asking for state of database.
    2009-10-22 02:06:09 Database is still preparing the backup.
    Waiting 1 second ... Done.
    Asking for state of database.
    2009-10-22 02:06:10 Database is still preparing the backup.
    Waiting 2 seconds ... Done.
    Asking for state of database.
    2009-10-22 02:06:12 Database has finished preparation of the backup.
The database has prepared the backup successfully.
2009-10-22 02:06:12
Starting Backint for MaxDB.
    Starting Backint for MaxDB process '/sapdb/CFC/db/bin/backint -u CFC -f back
up -t file -p /sapdb/CFC/lcbackup/param.cfg -i /tmp/backint4sapdbCFC.in -c >>/tm
p/backint4sapdbCFC.out 2>>/tmp/backint4sapdbCFC.err'.
    Process was started successfully.
Backint for MaxDB has been started successfully.
2009-10-22 02:06:12
Waiting for end of the backup operation.
    2009-10-22 02:06:12 The backup tool is running.
    2009-10-22 02:06:12 The database is working on the request.
    2009-10-22 02:06:14 The backup tool process has finished work with return co
de 2.
    2009-10-22 02:06:17 The database is working on the request.
    2009-10-22 02:06:27 The database is working on the request.
    2009-10-22 02:06:42 The database is working on the request.
    2009-10-22 02:07:02 The database is working on the request.
    2009-10-22 02:07:15 Canceling Utility-task after a timeout of 60 seconds ela
psed ... OK.
    2009-10-22 02:07:17 The database has finished work on the request.
    Receiving a reply from the database kernel.
    Got the following reply from db-kernel:
        SQL-Code              :-903
The backup operation has ended.
2009-10-22 02:07:17
Filling reply buffer.
    Have encountered error -24920:
        The backup tool failed with 2 as sum of exit codes. The database request
was canceled and ended with error -903.
    Constructed the following reply:
        ERR
        -24920,ERR_BACKUPOP: backup operation was unsuccessful
        The backup tool failed with 2 as sum of exit codes. The database request
was canceled and ended with error -903.
Reply buffer filled.
2009-10-22 02:07:17
Cleaning up.
    Removing data transfer pipes.
        Removing data transfer pipe /sapdb/CFC/lcbackup/pipe2 ... Done.
        Removing data transfer pipe /sapdb/CFC/lcbackup/pipe1 ... Done.
    Removed data transfer pipes successfully.
    Copying output of Backint for MaxDB to this file.
Begin of output of Backint for MaxDB (/tmp/backint4sapdbCFC.out)-
                                 Data Protection for mySAP(R)
                     Interface between BR*Tools and Tivoli Storage Manager
                     - Version 5, Release 4, Modification 0.0 for Linux x86_64
                           Build: 303 compiled on Nov 16 2006
                (c) Copyright IBM Corporation, 1996, 2006, All Rights Reserved.
        BKI0008E: The environment variable BI_CALLER is not set correctely. The
current value is "DBMSRV"
        usage:
         backint -p <par_file> [-u <user_id>] [-f <function>]
                [-t <type>] [-i <in_file>] [-o <out_file>] [-c]
        where:
               <user_id>    backint utility user
               <function>   backup | restore | inquire | password | delete
               <type>       file | file_online
               <par_file>   parameter file for backup utility
               <in_file>    name of a text file that defines the objects
                            default: STDIN
               <out_file>   Pool for processing messages and the results
                            of the executed function.
                            default: STOUT
        BKI0020I: End of program at: Thu 22 Oct 2009 02:06:14 AM EDT .
        BKI0021I: Elapsed time: 01 sec .
        BKI0024I: Return code is: 2.
End of output of Backint for MaxDB (/tmp/backint4sapdbCFC.out)---
    Removed Backint for MaxDB's temporary output file '/tmp/backint4sapdbCFC.out
    Copying error output of Backint for MaxDB to this file.
Begin of error output of Backint for MaxDB (/tmp/backint4sapdbCFC
.err)----
End of error output of Backint for MaxDB (/tmp/backint4sapdbCFC.e
rr)----
    Removed Backint for MaxDB's temporary error output file '/tmp/backint4sapdbC
FC.err'.
    Removed the Backint for MaxDB input file '/tmp/backint4sapdbCFC.in'.
Have finished clean up successfully.

Also, is there any specification about the user permissions and about how the backup should be run?

Namespace is not shwon correctly

Similar Messages

Maybe you are looking for