Namespace not defined in the SWCV error

Hi Experts ,
I am new to PI.
I am executing one IDOC to IDOC scenario for MATMAS05.
I have done all the source side, integartion server and destination side server configuration.
Source:SAP R/3 server
Int server:PI
Destination : SAP ECC 5.0
I have imported the MATMAS05 IDOC.
Created one name space under my predefined SWCV.
Then i copied that IDOC to both the source and destination in message mapping.And map all the red mark required filed of the target with source.
While activating the message mapping I am getting one error.
Namespace http://piidcoctoidoc is not defined in the software component version MANISHASC2 , 1.1 of manisha.co
and
Mapping not sufficiently defined
Can anybody help me how to resolve this?
Thanks
Manisha

hi Manisha
while activating the objects which you have created , you must be getting this error\
so while activeting the object select your Software component also and activate both then you will not be getting the error
becuase every time you generate a namespace in any software component then you need to activate the software compnent along with the object
if you left SWC and activating only the object then you must be getting this error.
for activating any objevt your software component must be activated first
what you must be doing ,,,,,, you are activating only the object and not your software component
so activete both first your software component and then your object
Thanks
sandeep
If helpful reward points
Edited by: sandeep sharma on May 16, 2008 1:04 PM

Similar Messages

Error in IR Namespace is not defined in the software component version

Hi All,
Please provide your valuable inputs to resolve the issue.
Namespace http://xxx.com is not defined in the software component version xxx_xxxxxx , 1.0 of xxx.com
Though the software component was already created in SLD and imported.All the developers were able to access the software component and create the Namespaces for their scenarios, but when tried to Activate the scenario above mentioned error is displayed.
Below are the checks done.
1.In Exchange Profile checked the properties,
com.sap.aii.connect.cr.httpport
com.sap.aii.connect.cr.name
com.sap.aii.connect.landscape.httpport
com.sap.aii.connect.landscape.name
2. Tried to import the software components once again through IR -- No results
3. Restarted the Java Engine through SMICM -- No results
4.Performed the SLDCHECK no errors.
Inputs please at the earliest
Regards
Shiva.

Hi Jochen,
This is occuring due to that the created namespace is not getting activated. As mentioned in earlier replies that if you have copied objects from somewhere else then all the related information should also be copied. If the problem resists then you can create all the needed objects in IR again and activate it separately instead of activating all at once.
Regards,
Subhasha

Namespace not defined. error:..

Hi experts,
I am trying to activate the IR objects and i keep getting the error, namespace for http://File to Bapi not defined in the software component version.
Has anybody come across such problem?????

Hi A,
what is http://file, namespace is it your SC (software component) or within interface design. If its within the SC then the namespace should be something like http://www.sap.com/Sales/Invoices etc, you can't just have http://file. If its the part of interface desing it should not matter.
Can you pls provide bit more info.
Cheers,
Ranjan

Error Infosource is not defined in the source system

I am extracting data into ODS. It was running perfectly till now. But today i am getting this error.and for all packages i run. whether it is transaction data or master data.
I replicated the DataSource and activated all the objects and transfer structure.but still getting the same error.
I even created a new DataSource and infosource but still the error persists. please help me in this matter.
Thanks

the data is extracted from BW system itself (Self System).
there are three tables linked to each other.I have created an infoset query and creted datasource on that infoset query.
the source system is the same bw system.
The detailed error report is -
InfoSource is not defined in the source system.
Message no. R3005
Diagnosis
The InfoSource specified in the data request, is not defined in the source system.
System response
The data transfer is terminated.
Procedure
In the Administrator Workbench of the Business Information Warehouse, update the metadata for this source system, and delete the InfoPackages belonging to InfoSources that no longer existing .

Error: Infoobject is not defined in the source system

hi
(I posted this in other forums as well - but wondering, it it should be here in BCT/Extractors - I could use more help).
this is my issue:
I am trying to load master data (attr) for an infoobject.
But, it fails with the following error message (when I click on the "Error message" button on the "monitor" screen.
"Infoobject is not defined in the source system"
"Erros in source system".
(I did rsa3 and find it has some data + i checked on the base table as well, it has data; the datasource is from an SRM system) Why is it complaining like this.
any help on what could be wrong here? Pl let me know,
thanks

Thanks Ricardo,
I have tried that b4. and it says the "source system connection is OK".
any other idea?
Do I have to install the infoobjects on the source system as well? SRM is my source system.. I am not sure on that, but If I have to, how do I do that?
thanks
Message was edited by: Esan

View BT26H_APPT/ApptDetails is not defined in the run time repository.

Hi,
I am getting this error when i component work bench.view BT26H_APPT/ApptDetails is not defined in the run time repository that was loaded. can i manually load in run time repository or how can i approach this issue.
rose.

Hi Rose,
While enhancing any component using an enhancement set you can give any name for bsp application under customer namespace ( like z, y) but usually when we create a new application we just put the z or y infront of the component name and create it for example if you want to enhance bp_head_search then usually people create a new bsp appl with name zbp_head_search because it will help in finding it in se80 to figure out the component anyway you can give any name if you want.
For each component you need to create a new bsp appl.
You should use one enhancement set per client, you can use sm30 and view BSPWDV_EHSET_ASG to define your enhancement set for each client.
So to enhance all the component in same client you should use same enhancement set for that client.
I think that would be useful, let me know if you have any other doubts.
Thanks,
Shobhit

Namespace not defined

Hi
When I was doing mapping I found out that I have not created a field in outbound data type.
I went to my outbound data type and added the field. I saved it and tried to activate it. I got an error like this
Namespace urn:ABC100 is not defined in the software component version ABC100SWC , 1.0 of XYZ
Any inputs ?
Regards

Similar thread How add namespace in software component
Regards,
Sunil Chandra

The tax code entered is not defined in the company code country.

Dear sap guru's
I am facing a problem while doing invoice or while cancelling the invoice or even during Subsequent Credit/Debit
Tax code V0 in procedure is invalid
   Message no. FF704
Diagnosis
   The tax code entered is not defined in the company code country.
System Response
Procedure
   Check and, if necessary, correct the entry.
Procedure for System Administration
   If it is not an input error, check and possibly change the system
   settings.
   To do this, choose Maintain entries (F5).
   1. Check whether the required tax procedure has been allocated to the
       company code country. The Procedure field is on the detailed screen.
   2. If you need a new tax code, you can create one yourself.
For this i have checked the assignment of company code and tax code V0 in Tcode (OBCL)
In FTXP the tax code is created in country IN, for the same tax procedure and the tax is a input tax.
please suggest what could be the exact problem
Regards
Sujit

Hi Sujit,
1.Go to FTXP and create tax code V0 for country IN and procedure ZAXINN.
2.In Txn: FV11, For the condition type- XXXX (You will get this in Txn: FTXP, against the tax type, you get the condition type OR in the PO-Item details- Invoice tab, next to field: Tax code, see the Tab-Taxes, click on it and will get the condition type) , maintain the country-IN, Tax code-V0 and the rate.
3.Also things to be checked
1> assign country to company code
2> assign company code to tax code
3> create tax code for country IN
4.Under the following menu path, pls check if you have assigned your tax code to Company Code
IMG>Logistics (General)>Tax on Goods Movement>India>Basic Settings>Determination of Excise Duty>Condition Based Excise Determination>Assign Tax Codes to Company Code
Hope it clears,
Rahul.

InfoSource 8ODS_SLS is not defined in the source system

Hi Guys,
    When I tried to load data from ODS to Infocube, I am getting the following error.
InfoSource 8ODS_SLS is not defined in the source system
      Source System is not R/3. It is just a flat file and data was uploaded into ODS. When transferring the data from ODS to Infocube, I get this problem. And I have defined the update rules for infocube and also given the infosource name as ODS.
      But the data is not getting uploaded in the Infocube.

First replicate your BWSELF system.
Then, Run this program in SE38:
rs_transtru_activate_all
Enter the source system (your BW system)
Enter the datasource (8ODS_SLS).
If you get an error message immediately, the datasource doesn't exist. If it runs, check and make sure you get no error messages.
/smw

Infosource 8ZISCMS10 is not defined in the source system

Hi Gurus,
I got an issue when loading the data with in SAP BW (Info source is ODS),It threw an error message stating "Infosource 8ZISCMS10 is not defined in the source system",
Could any one of you help me in this regrad plz,
N:B: I have activated the transfer structure through RS_TRANSTRU_ACTIVATE_ALL and replicated the data sources before loading...

When u activate DSO/ODS (say ZISCMS10) it creates datasource (8ZISCMS10) & Infosource (8ZISCMS10)
U can check these at ...... Modeling --> Datasources -> BI -> BI source system name. If it is missing .. reactivate DSO/ODS.
If the load is failing in QA, u should rereactivate DSO/ODS in DEV and transport that to QA.. After transport.. make sure datasource (8ZISCMS10) & Infosource (8ZISCMS10) appears in QA (Modeling --> Datasources -> BI -> BI source system name)

InfoSource is not defined in the source system

Hi,
We are getting error 'InfoSource is not defined in the source system' while extracting data from Planning book to Cube in APO.
Data is coming up to Extrack checker ( RSA3 ) but not comming to PSA.
Please help me.
Thanks
Subba Rao

Hello Subba,
Have you replicated the datasource on the BW side? If you use the 3.x data flow then you also need to assign the datasource to and infosource.
Best Regards,
Des

ZSD_TABLE is not defined in the ABAP dictionary as a table"

Hello,
I created zsd_table and inserted few records
When i use this table in program system is giving error message "ZSD_TABLE is not defined in the ABAP dictionary as a table"
How can we define this table in ABAP dictionary?
Thanks

Hi,
Go to Transaction SE11
Give the table name 'ZSD_TABLE'
and click on create and enter the fileds
after entering fields give 'techinical setting' for a table by clicking on technical setting button on tool bar
save check and activate
Regards
Krishna

Field in structure 'is not defined in the ABAP Dictionary'

Hi,
I have created an Infoset (SQ01) based on an external program and structure.
These two things are required.
However when I try to generate my Infoset I get an error message for each element in the structure I created in SE11.
The error is:
"<structure_name-field_name> is not defined in the ABAP Dictionary"
Each element in my structure gives this error yet I have defined this in SE11 as a structure and activated it.
These elements are included in my Infoset and as a field group in the infoset.
Has anyone come across this error before and knows how to resolve this problem?
Many Thanks
David

Hey,
I got the same prb.
Just reset the text buffers.
Rgds,
Martin

RV13B is not defined in the ABAP dictionary

Hi Experts,
Iu2019ve a requirement to create a smartform,and then save it as a pdf and email. I have all of this done except for one part. At present my email address (for testing purposes) is hard coded as the email address. However I want to automatically pick up the email address to which my form is to be sent.
The email address is found in transaction mn22. The pdf will be emailed to RV13B-PARNR (Partner) based on KOMB-LGORT (storage location). Each storage location is unique.
Iu2019ve put in the following code:
SELECT PARNR FROM RV13B INTO CORRESPONDING FIELDS OF TABLE it_vemail[]
WHERE stor_loc EQ KOMB-LGORT.
However Iu2019m getting the error RV13B is not defined in the ABAP dictionary as a table, projection view or database view.
Could anyone give me some help?
Thanks,
Mike.

Mike,
F1 Technical help will not give you the table name in some cases.Instead of the table it will refer to the structure.In such a case you need to get the corresponding table for that field either from SQL trace or searching the possible tables with such field using SE84 which requires a bit of analysis in zeroing on the correct table where you can get the appropriate data related to that field.
SE84>>ABAP Dictionary>>Fields>>table fields.
Give PARNR and get the list of the possible tables containing PARNR as a field.If one is aware of the functionality then it will be easier to zero in on the field and the corresponding table from that list.
SQL trace can help you in tracing out the possible tables used by a transaction code.ie if you do a SQL trace on VA01 you will come to know all the possible tables of VA01.
Thanks,
K.Kiran.

The tax code entered is not defined in the country for this company code

HI ALL
when we relase billing document to finance i am getting this below error
Diagnosis
    The tax code entered is not defined in the country for this
    company code.
System Response
Procedure
    Check and, if necessary, correct the entry.
Procedure for System Administration
    If it is not an input error, check and possibly change the
    system settings.
    To do this, choose Maintain entries (F5).
    1. Check whether the required tax determination procedure
        is assigned to the relevant country. the Procedure
        field is in the detail screen.
    2. Create a new tax code if required.
Thanks & Regards
Aarman

You can define the tax code for your country using the following menupath in customizing:
IMG>Financial Accounting>Financial Accounting Global Settings>Tax on Sales and Purchases>Calculation-->Define tax codes ........... in the next screen enter your country and then the tax code you wish to create and press enter. You would be then directed to another screen, where you would maintain the description and whether it is a Input tax or Output tax and then maintain the appropriate tax percentage and save.
Your country should also be assigned to a calculation procedure. You check the same using the same menupath as mentioned above: .............Tax on Sales and purchases>Basic Settings>Assign country to calculation procedure........In the next screen, enter the appropriate tax procedure for your country. Eg: for country DE assign tax procedure as TAXD and save.
Hope this helps.
Regards
SATYA

Namespace not defined in the SWCV error

Similar Messages

Maybe you are looking for