Naming changes for SAP business systems

Hello
I have developed my interfaces in which most of them are from SAP to third party. We have SAP configured with its SID as the business system (e.g. DC1). Now we are planning to change the name of all the business systems in SLD. I deleted the previous business system from the SLD and created the new one according to newer standard and configured receivers based on it.
My problem is when I am posting the message through ABAP proxy its still taking the SID as the sender. As a result its not finding the receiver. Do I need to configure the sender in my source ECC system?
Thanks in advance.
Regards
Rajeev Patkie

Hi Rajeev,
The Business system details like the client and logical system etc, help the proxy to know where it has to go.
Not for the sender system from where you are executing the PRoxy will have a Business system .Please check if the information is for the Business system can be seen correctly in the ID>BS>service-->Adpater specific identifiers.
Also you sender XI adapter is attched to this Business system.
No what is your receiver? You haven't specified that?
Also, you can just reactivate the PROXY once.
Cache refresh??
Regards
Vijaya

Similar Messages

How to change R/3 System ID & Client values for a Business System in ID

I am a beginner in PI or XI. I am trying to modify R/3 System ID & Client# under Adapter Specific Identifiers of a Business System in ID. But both are in output mode and I tried to modify in SLD and then resynch at ID level, but I could not find a place where these parameters are specified for that Business System in SLD.
Please help me!

I have a Client 500 and R3 Server EN3 now these two things were already there on a Business System, but Admn did some thing on my test system and now we have another Business System pointing to TS of type WEBAS-ABAP and Admin assigned this same client 500 and EN3 server name in SLD to this new Business system, but as you know these changes will not reflect in my ID scenario automatically unless we do it manually with synchronization button under Adapter Specific Identifiers.
So my requirement is now to remove those values from the old BS and keep them or get them through synch for my new BS in my ID scenario, which I am not able to do it. The new BS is pointing to WEBAS-ABAP type TS but the old one I think it is now not pointing to any TS any more, it just left like a orphan with no technical System, I think Admn did some magic with bad practice, I believe.
HOw do I handle this situation?

Crystal Reports background processing for SAP Business One 8.8

Dear Partners,
I have an SDK program developed in SAP Business One SDK that works in 2007, it calls crystal reports externally and can be executed as a background task using the windows schedular or from the command prompt.
My problem is it does not work under SAP Business One SDK 2008 PL18 with SQL Server 2008, Visual Studio 2008.
I receive the following message after this line in my code,"oReport.PrintToPrinter(CopyNo, False, 0, 0)".
'CrystalDecisions.CrystalReports.Engine.LogOnException: Logon failed.
Error in File XX_Report_Ver_0.01 {1A6620A2-5D73-49D2-9347-32ED068AA64E}.rpt:
Unable to connect: incorrect log on parameters. ---> System.Runtime.InteropServices.COMException (0x8004100F): Logon failed.
Error in File XX_Report_Ver_0.01 {1A6620A2-5D73-49D2-9347-32ED068AA64E}.rpt:
Unable to connect: incorrect log on parameters.
   at CrystalDecisions.ReportAppServer.Controllers.ReportSourceClass.GetLastPageNumber(RequestContext pRequestContext)
   at CrystalDecisions.ReportSource.EromReportSourceBase.GetLastPageNumber(ReportPageRequestContext reqContext)
   --- End of inner exception stack trace ---
   at CrystalDecisions.ReportAppServer.ConvertDotNetToErom.ThrowDotNetException(Exception e)
   at CrystalDecisions.ReportSource.EromReportSourceBase.
   at CrystalDecisions.ReportSource.EromReportSourceBase.GetLastPageNumber(ReportPageRequestContext reqContext)
   at CrystalDecisions.CrystalReports.Engine.FormatEngine.PrintToPrinter(Int32 nCopies, Boolean collated, Int32 startPageN, Int32 endPageN)
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.PrintToPrinter(Int32 nCopies, Boolean collated, Int32 startPageN, Int32 endPageN)
   at BGProductionRpt.ECR_Common.ECR_PrintReport(Int32 CopyNo) in C:\SDK Development\8.8\test\XX_Rpt\ECR_Common.vb:line 485'
My Question is what Crystal Reports libraries or other method should I be using ?
Crystal Reports 2008 for SAP Business One eg. 51038978.zip - downloaded from portal obviously dosn't contain the CrystalDecisions libraries.
Crystall Reports 2008 - cr2008_sp3_fullbuild, cr2008fp33.exe, cr2008fp33_mm, cr2008fp33_clickonce - also download from the portal, the cr2008_sp3_fullbuild does contain the crystal decisions libraries.
Finally other choices are crystal reports included with the visual studio 2008 and crystal reports full version direct from Business Objects.
I have tried different versions of crystal decision libraries- eg, 12.0110 or 12.02 but still no joy.
Also if I manage to get the report to fire what should the client be running eg, if they have the Crystal Reports 2008 for Business One do they also need to install the Crystal Reports Run time - cr2008fp33_clickonce.
Any help would be appreciated.
Thanks.

Hi John
Since the SDK works in 2007 it will be using the OLD DB access method.
Change the Crystal report to use an OLE DB datasource rather than the SAP Business One data source.
Regards
Rob

Can there be more than one transport targets for a business system in sld

Hi All,
I have a question about transport targets in sld for sap xi 3.0 sp19.
We have a requirement where a business system needs to have two transport targets.In SLD i see that only one transport target can be assigned. Is there any way to assign more than one transport target to a business system?
I know that there can be more than one source for a business system where more than one different business systems have the same business system as the target.
I am not sure if a business system can have more than one transport target .If yes , what is the way to add more than one ?
Please help .
Thanks,
Padmaja

Hello,
I know that there can be more than one source for a business system where more than one different business systems have the same business system as the target.
As far as I know, you would have to change the target everytime you will transport it to a different target e.g 3 target systems = 3 times you change the transport target in SLD.
Regards,
Mark

Know more detail about the Remote Support Platform for SAP Business One ?

SAP Business One 9.1 is about to release this year and we can see in the feature enhancements that a significant update is planned in the Remote Support Platform for SAP Business One, more commonly known as RSP. Let’s have a quick look what update is planned for RSP in version 9.1:
Enhancements planned in Remote Support Platform for SAP Business One 9.1
RSP is planned to support both SAP Business One on Microsoft SQL Server as well as SAP Business One on HANA Database
RSP Processes and Reports adapted to SAP HANA Database
With this plan RSP will help in the areas of Download, Installation, Go-Live Check, Monitoring, Upgrade and Support for SAP Business One both   on SQL Server and HANA.
But like me (non-SAP B1 Consultant) many of you have the question what is RSP and how it helps in support? Here I have tried to gather all information.
What is Remote Support Platform for SAP Business One?
The remote support platform for SAP Business One is designed to protect a SAP Business One installation by providing automated and remote support in a high-volume business.
The platform monitors the entire SAP Business One environment. By significantly reducing the time between the appearance, identification, and resolution of issues, the remote support platform for SAP Business One minimizes the impact on customer databases and processes.
Some Key Features of Remote Support Platform:
Showing alerts to SAP B1 Admin about the events which require their attention, such as low disk space, database backups, etc.
Incident Reports against the issues identified which require attention of SAP Support
Company Database Backup and Restore options
Regular fixes of Company Database inconsistencies
Check, Download and Install regular updates in SAP Business One
Upload Logs and required files to SAP Support or to Partner Support on regular basis
Some details about RSP Backup Management
Schedule daily, weekly, and monthly backups
Perform differential and full database backups
Back up transaction logs
Back up files to shared folders on a network
System Status Report through RSP
From June 1st 2013, it will be mandatory to install, configure and upload the System Status Report (SSR) from Remote Support Platform (RSP) for SAP Business One in order to receive support for messages of a technical nature (upgrades, performance & crashes, etc).
Database uploads only via RSP
From June 1st 2013 SAP Business One Support will only accept database uploads to SAP via remote support platform for SAP Business One. In certain exceptional circumstances STFP may be used but this will constitute a minority of cases.
Microsoft Windows PowerShell Scripting
In the remote support platform studio, you can create tasks using Microsoft Windows PowerShell scripting. PowerShell enables you to perform remote administrative tasks on customers’ Microsoft Windows operating systems, by providing full access to Component Object Model (COM) and Windows Management Instrumentation (WMI).Some Network Prerequisite for RSP
To achieve the internet connection test, you must allow port 80 for the RSP external communication
Disabling antivirus firewall or add the RSP to the trusted zone of the antivirus
Set the correct proxy
Disabling Windows firewall in the TP_link Wireless Configuration Utility
Want to now More about It Click Here :   Remote Support Platform for SAP Business One

SAP Business One 9.1 is about to release this year and we can see in the feature enhancements that a significant update is planned in the Remote Support Platform for SAP Business One, more commonly known as RSP. Let’s have a quick look what update is planned for RSP in version 9.1:
Enhancements planned in Remote Support Platform for SAP Business One 9.1
RSP is planned to support both SAP Business One on Microsoft SQL Server as well as SAP Business One on HANA Database
RSP Processes and Reports adapted to SAP HANA Database
With this plan RSP will help in the areas of Download, Installation, Go-Live Check, Monitoring, Upgrade and Support for SAP Business One both   on SQL Server and HANA.
But like me (non-SAP B1 Consultant) many of you have the question what is RSP and how it helps in support? Here I have tried to gather all information.
What is Remote Support Platform for SAP Business One?
The remote support platform for SAP Business One is designed to protect a SAP Business One installation by providing automated and remote support in a high-volume business.
The platform monitors the entire SAP Business One environment. By significantly reducing the time between the appearance, identification, and resolution of issues, the remote support platform for SAP Business One minimizes the impact on customer databases and processes.
Some Key Features of Remote Support Platform:
Showing alerts to SAP B1 Admin about the events which require their attention, such as low disk space, database backups, etc.
Incident Reports against the issues identified which require attention of SAP Support
Company Database Backup and Restore options
Regular fixes of Company Database inconsistencies
Check, Download and Install regular updates in SAP Business One
Upload Logs and required files to SAP Support or to Partner Support on regular basis
Some details about RSP Backup Management
Schedule daily, weekly, and monthly backups
Perform differential and full database backups
Back up transaction logs
Back up files to shared folders on a network
System Status Report through RSP
From June 1st 2013, it will be mandatory to install, configure and upload the System Status Report (SSR) from Remote Support Platform (RSP) for SAP Business One in order to receive support for messages of a technical nature (upgrades, performance & crashes, etc).
Database uploads only via RSP
From June 1st 2013 SAP Business One Support will only accept database uploads to SAP via remote support platform for SAP Business One. In certain exceptional circumstances STFP may be used but this will constitute a minority of cases.
Microsoft Windows PowerShell Scripting
In the remote support platform studio, you can create tasks using Microsoft Windows PowerShell scripting. PowerShell enables you to perform remote administrative tasks on customers’ Microsoft Windows operating systems, by providing full access to Component Object Model (COM) and Windows Management Instrumentation (WMI).Some Network Prerequisite for RSP
To achieve the internet connection test, you must allow port 80 for the RSP external communication
Disabling antivirus firewall or add the RSP to the trusted zone of the antivirus
Set the correct proxy
Disabling Windows firewall in the TP_link Wireless Configuration Utility
Want to now More about It Click Here :   Remote Support Platform for SAP Business One

Integration directory : select IDOC interface for WAS business system

Hi,
While adding a receiver determination for an WAS business system, I do not get any IDOC based message interface from the design repository proposed for my business system in the popup dialog.
The only interfaces that appear are for the non SAP standard SWCV that we added to the business system. But no interface for the APPL 5.0 SWCV ( or BASIS 7.0 ) appears.
In the SLD this component is correctly listed for that WAS .
If I remove all the default search criteria , eventually, the in terface appears but after selecting it I get a message saying :
"Message Interface does not exist in any software components installed on this business system "
Since everything looks ok in the SLD I'm puzzled. How does this look on other systems ?
Any ideas
( The business system was updated from APPL 4.70 / BASIS 6.40 to APPL 5.0 / BASIS 7.00 some time ago but I don't know how it look before the upgrade of the business system )
rgds
Dirk

Hi Bavesh,
Yes, It's correctly listed. I did not manually link these components to the technical/business system. This happened automatically by the SLD data collector service. I also cleared the SLD cache several times,
rgds
Dirk

SAP Business Systems Analyst w/L&D business function experience $90-120/hr!

Our prominent Orange County client is aggressively seeking a SAP Business Systems Analyst! This is a contract position and is located at their Irvine office. This company is privately held and extremely stable. They have built upon a solid foundation of values, including a focus on the long term and emphasis on quality. They are growing rapidly with a very advanced IT shop. They have many popular bleeding edge technologies and methods, and are looking for individuals with deep knowledge and experience in leadership and management that can help them lead effective IT project teams. Our client's IT Department has over 1000 employees and is growing. They widely use RUP, UML, ITIL and Waterfall methodologies so it is a plus if you are familiar with them.
Below is the job description for the position. Please review and if you are interested, please contact Susan Ashman (susan.ashman @ zebra-net.com) at 949-910-9800 or 949/900-6110 we will be happy to tell you who our client is and begin the interview process for you.
Required skills:
Thorough knowledge of System analysis and functional design
General knowledge of:
u2022 The securities/mutual fund industry (terminology, procedures and regulations) with thorough knowledge in some specific areas
u2022 Software development and implementation
u2022 Structured programming techniques
u2022 Data modeling and database design
u2022 User interface principles and windows design standards
u2022 System design documentation
u2022 Documentation and training
u2022 Project planning and estimation
u2022 Application Architectures
Basic knowledge of:
u2022 Project Management
Must have Technical Skills:
 Three (3) yearsu2019 experience as a SAP BSA with focus on L&D business function
 SAP ECC 6.0 LSO602 working module experience
 Experience supporting SAP LSO in a functional capacity
 Implementation/project experience would be a plus
 Working knowledge of waterfall SDLC practices
 Ability to follow step by step instructions independently and assist business user in troubleshooting production issues
 Ability to analyze business issue/defect, document findings and resolution with an ability to estimate effort to correct
 Understanding of SAP LSO practices and procedures, with an ability to understand the need to escalate to SAP when necessary
Must have general skills:
 Need business systems support for a daily activities relating to support of SAP LSO ECC 6.0. This includes different delivery methods especially eLearning and Virtual classroom which are currently the most heavily used
 Serve as the primary liaison between the business requirement and the technical teams
 Provide daily production support to training organizations
 Perform SAP confirmation as it related to enhancements to existing SAP LSP operation
 Ability to manage enhancement, defect or data maintenance requests through implementation lifecycle
 Documentation related to enhancement, defect or data maintenance implementations
 SAP resource has end-to-end practical not conceptual experience in the use of SAP LSO and SAP portal and SAP Authoring Environment

maybe OP want to extract all numbers from his inbox using regular expressions?

SAP business systems

Hi all,
In SLD we can create the Business systems for the SAP systems. What are the different SAP Systems generally.
If I want to create 2 SAP Business Systems I have to create One Product or 2 different products for each.
Regards,
Anjaneya

What are the different SAP Systems generally.
In SLD, for SAP systems, usually WebAs ABAP business systems and technical systems are created.
If I want to create 2 SAP Business Systems I have to create One Product or 2 different products for each.
There is no such constraint. Creation of product is just the logical distinction of the system landscapes across any organization. U may create a Business System without that also
Regards,
Prateek

NonSAP client- SOAP- PI- ABAP Proxy- SAP Business System EOIO Question

Hey all... wondering how and if the following can be accomplished
I have a nonSAP client that is sending SOAP message pairs to PI 7.11 SP06. PI is then sending these messages via ABAP Proxy to our SAP business system. By pairs I mean for each event in the client it's going to send 2 messages to PI and then to SAP business system. These messages have to be processed by PI and SAP in the exact order the client sends them.
My goal is to have the client somehow specify the queueID and quality of services as EOIO when it calls PI via the SOAP message. The reason is when the client sends 1 set of messages we don't want it to block subsequent message pairs if something goes wrong with the first. We're going to have an "ID" as part of the queueID that will be unique by pair.
My question: is it possible to specify this queueID (and the qos=EOIO) in the SOAP message that is sent to PI so this queueID carries through PI and into the SAP business system?

hi,
you can do that :
a) in standard with http adapter :
http://help.sap.com/saphelp_nw04/helpdata/en/43/64db4daf9f30b4e10000000a11466f/content.htm
with &queueid=<queueid>
b) not in standard with SOAP adapter
Regards,
Michal Krawczyk

Public-real IP changed for SAP Router

Hello,
The real IP for SAP Router system has changed, therefore I would need to re configure the same.
I have gone through existing threads, but not throwing much light related to my query.
I tried to reconfigure, but when generating the certificate I get below error. The /usr folder is the old folder of the router and am trying to reconfigure in folder is /newrouter. The OS is windows server 2008.
D:\NewRouter\ntintel>sapgenpse get_pse -v -r certreq -p local.pse "CN=<hostname>,
OU=0000872340, OU=SAProuter, O=SAP, C=D"
Got absolute PSE path "D:/usr\local.pse".
get_pse ERROR: PSE already exists "D:/usr\local.pse"
I have already changed the environment variables for SECU_DIR and LIB one.
My questions are :
1) Is there any way to just update the ip address on the market place by just opening the ticket at XX-SER-NET OR do I need to perform the whole procedure after uninstalling previous configuration.
2) What is the method for uninstallation of SAP Router?
Thanks.
Sat

Hi,
Thanks for your reply.
Actually I changed the env variables and after restarting the sapgenpse command worked.
But I did not proceed further.
I have informed SAP to update the new ip address.
My query is what action should I perform at my end instead of reconfiguring the router again.
Thanks.
Sat

UK Payroll Modul for SAP Business One

Dear all,
is there already a Payroll Add-On or Modul Solution available for SAP Business One for the UK Market?
Regards, David

David,
You will want to check the Channel Partner Solution Network SAP website. Here you can search for soltions that integrate with Business One and you can find out which market these solutions serve.
The link is ...
http://cpsn-channel.sap.com
HTH,
Eddy

Add-Ins menu not visible in Crystal report for Sap Business One

Hi,
I have installed the Crystal Report Design for Sap Business One on my customer server.
But when I open the Crystal Report I can't see the Add-Ins menu to put the rpt directly on my Sap Business One.
I have installed it on many customer, but only with this I have this type of problem.
There is some restriction on Sap Version/Patches or Authorization Users or some check that I have to set on Sap or on Crystal Report?
Regards
Marco

Hi All,
i have the same issue on crystal report add-ins. Have you able to solve this without upgrading our sap business one to the latest version or patch level? Please see details below.
OS: MS Windows 7 SP1
SAP Business One 8.82 pl7
Crystal report 2011
Crystal report integration package installed under B1_SHare/Client
But still the problem persist on the workstation.
Please help me solve this problem.
Thank you,
ana

Error while 'Crystal Report for Sap Business One' addon started

Hi,
I have try to install Crystal Report for Sap Business One (Addon Versione number 2.0.0.7).
The installatione finish succesfully, but when I started the addOn i retrieve this errore message: External Connection to the dataBase failed. Sap Crystal Addon may not function properly. Please re-run the account setup with superuser login.
I'm logged in Sap with manager (super user), so maybe I have forgot some step in the installation?
I have see the Demo in the Channel Partner Portal, I have note that I have to isntall the CR_Runtime_12_0, but I don't find it, I don't know where I can download this file. I have just installed SapCrystalSetup.exe and registered the Addon like a normal Sap B1 addon.
Where is the error??
Regards
Marco

You must configure in each cliente Pc the connection with the DATABASE.
You must Know the Database Super User (In SQL Server usually sa, and its password, the standard form SAP Business One is SAPB1Admin)
In Administration > Crystal Reports Administration > Account Setup
The CR_Runtime_12_0 is only necesary to view reports, but isn't necesary to start de addon.

Crystal report for sap business one problem

Hi experts,
I am facing problem while dealing with crystal report 2011.
I installed sap b1 8.8 pl 10, then upgraded to pl 20. Now again upgraded to 9.0 pl08. Then i installed SAP Crystal Report for SAP Business One 2011.
I seems that it is not integrated to SAP Business One, because i am not able to save my crystal layouts in sap business one.
How can i resolve this issue, please let me know if anyone faced same kind of problem and got solution for that.
Thanks

Hi
1758302 - Error while connecting to Crystal
1397692 - Error when starting Crystal Reports software
Thanks
Mohammad Imran

Extended Notifications for SAP Business Workflow

Hi expert,
i need your help!!
i have configured the "Extended Notifications for SAP Business Workflow" with the tnx SWNADMIN and this was successful. I can write emails, but i can read this only on SAP GUI with the tnx SOST. I don't receive email on my email-address.
can you say me, where is the problem?
Thank you in advance
marcel

Hi Marcel
Rope in your Basis Guy!
Basically, your Extended notif part is working fine..... emails reaching SOST is proof. Going out of SAP may need basis config.
What do you see, a yellow triangle or a red light in SOST?
Regards,
Modak

Naming changes for SAP business systems

Similar Messages

Maybe you are looking for