Naming convention in template css file

Is there a specific reason for having the theme "name" hardcoded in many css definitions ?
For example consider the css for the rows in a report:
In the css files for each theme it is defined in a different way:
Theme1: td.t1data
Theme2: td.t2data
Theme3: td.t3data
...Overriding these values and manipulating the styles using Javascript gets a bit cumbersome if it should work across themes.
Are there any naming conflicts or is it just for historic reasons that don't apply anymore in the 2.0 release?
In other words, would it be safe to use just td.data in new templates or will I run into problems doing this?
Thanks,
~Dietmar.

Hi Carl,
thanks for the clarification. I had figured that you had a good reason to do so.
It's a tradeoff, either approach has pros and cons.
Most likely we will stick with that type of naming convention, but we'll look into it again.I would like to throw in an idea. You can add multiple css classes to an html tag, e.g.
<td class="t12data data">The css for the class data would be empty.
This way we could have both, different class names for different themes, but also having the elements "tagged" the same way so that the javascript should work.
Haven't thought it out, it just came to my mind. You might consider it.
And yes using td.data should be just fineI guess I will go down that route.
I will create only a single theme and then use multiple css style sheets to modify the look and feel.
This way I can switch the theme on the fly by switching style sheets only.
Javascript modifications will work since the css class names are the same.
All customized region templates will only have to be created once (and not for all themes).
Thanks and a Happy New Year,
~Dietmar.

Similar Messages

Regarding file naming convention(while publishing a file to FTP)

Hi,
In one of our usecases, we need to configure the file name based on the client’s requirement.(to place the file in FTP. But the file name should be customized by us.) We referred to the link given below.
http://www.b2bgurus.com/2008/04/customizing-file-naming-convention-in.html
Can you please briefly explain about where should we setup the 'macro' so that we can change the file name(which will be placed in FTP) as we like.
Thanks,
Shanmuga S.
Edited by: user655473 on 16 Oct, 2008 11:42 AM

Hi,
     As you said we had applied the patch(number 7233222).In the Transport parameter, we entered the values for 'filename format' as given in the link,
     http://www.b2bgurus.com/2008/04/customizing-file-naming-convention-in.html.
     But we couldn't put the file in FTP.
     Our usecase is to send file(with customized name) to FTP.
     Before applying the patch, this scenario works fine and we could put the file into FTP. In this case the default file name is '%FROM_PARTY%_%TIMESTAMP%.dat'.
     After applying the patch (number 7233222), we got the entry 'filename format' in 'Transport parameter'. There the default value is given as '%FROM_PARTY%_%TIMESTAMP%.dat'. But in this flow(after applying patch) we couldn't put the file in FTP. No error logs were seen in b2b.log file.
     In 'b2b_dc_transport.log' file, we were getting the following logs,
     "2008.10.17 at 19:47:16:273: Thread-20: (DEBUG) FTPAgent.login(): Enter
     2008.10.17 at 19:47:16:273: Thread-20: (DEBUG) Host name is 'PC022350.cts.com'.
     2008.10.17 at 19:47:16:289: Thread-20: (DEBUG) Host PC022350.cts.com FTP command: USER sss
     2008.10.17 at 19:47:16:289: Thread-20: (DEBUG) FTP Command: USER, reply:
     331 Password required for sss
     2008.10.17 at 19:47:16:289: Thread-20: (DEBUG) Host PC022350.cts.com FTP command: PASS
     2008.10.17 at 19:47:16:289: Thread-20: (DEBUG) FTP Command: PASS, reply:
     230 Logged on
     2008.10.17 at 19:47:16:289: Thread-20: (DEBUG) FTPAgent.login(): Exit
     2008.10.17 at 19:47:16:289: Thread-20: (DEBUG) Host PC022350.cts.com FTP command: PASV
     2008.10.17 at 19:47:16:289: Thread-20: (DEBUG) FTP Command: PASV, reply:
     227 Entering Passive Mode (10,232,65,97,7,197)
     2008.10.17 at 19:47:16:289: Thread-20: (DEBUG) Passive: ip = 10.232.65.97, port = 1989
     2008.10.17 at 19:47:16:289: Thread-20: (STATUS) Connecting to PC022350.cts.com:1989
     2008.10.17 at 19:47:16:289: Thread-20: (DEBUG) Host PC022350.cts.com FTP command: NLST /FTP/Acme
     2008.10.17 at 19:47:16:289: Thread-20: (DEBUG) FTP Command: NLST, reply:
     150 Connection accepted
     2008.10.17 at 19:47:16:304: Thread-20: (ERROR) FTPClient.listNames(): LIST REPLY: 226
     2008.10.17 at 19:47:16:304: Thread-20: (DEBUG) Disconnecting from PC022350.cts.com
     2008.10.17 at 19:47:16:304: Thread-20: (DEBUG) Host PC022350.cts.com disconnected."
     Please help us in resolving this issue.
Thanks,
Shanmuga S.
Edited by: ShanmugaS on 17 Oct, 2008 7:51 PM
Edited by: ShanmugaS on 17 Oct, 2008 7:52 PM

SAP Naming Conventions for DB Data Files

Hi Everyone!
We are about to install a SAP ECC 6.0 SR3 ABAP on Windows Server 2008 (R2) & SQL Server 2008 SP1 and we want to name the DB data files as follows:
<sid>DB_Data_001.MDF/NDF
Do you see any problem with this or think this could lead to a problem in the future?
We were unable to find a SAP note or SAP recommendation about this, we only found SAP Note 27428 but itu2019s for Oracle.
Thanks in advance!
Best Regards,
Nicolas

Hi Nicolas,
I thought about all corners where this could possibly lead to a problem (e.g. monitoring, DB13, ...) but couldn't think of a single report or transaction where this would cause problems.
To the database itself the names of the files do not matter at all and in the SAP transactions the datafiles are only read to display them in monitoring transactions like DB02 or RZ20. These transaction do not expect a certain naming convention so I don't see anything that would count against using different filenames.
Regards,
Beate Grötschnig

Naming conventions included for linked files?

Perhaps a simple question but... if a file is only going to serve as a downloadable link (save as) do the standard naming conventions still apply? (lowercase, no spaces) the files i am working with are dwg, pdf, zmt, jpeg, png... my assumption is yes but thought i would ask.
thank you in advance,

All lowercase is nice, and easier since URLs are case-sensitive. Spaces are always best avoided. Completely. Some systems handle them, but there are no guarantees. Underscores (_) are a good alternative.

Design Studio Desktop Template CSS file

Hi Everyone,
I see few good addition in Template for Desktop with the release of 1.3. I wanted to use one of the template to create dashboard and publish it to BI Lauch Pad, which will require to upload the CSS file as well to view in portal.
Does anyone know where can we find CSS for template which is NEW_DESIGN_FONT.css
Thanks,
Rajan

Rajan,
If you are referring to the icons for bookmark, settings etc. they are really not images, they are just text which uses the SAP-ICON fonts. If you look in the CSS file for the bookmark CSS code you will see that it uses SAP-icons as the font.
.ICON_BOOKMARK:before {
font-size: 22px;
font-family: 'SAP-icons';
content: "\e19b";
speak: none;
If you copy the 2 files SAP-icons.EOT and SAP-icons.ttf from the same folder mentioned above to your application folder and use the same CSS classes in your application you will be able to get those icons.
Deepu

AppleScript To Save Messages As PDFs With Specific Naming Convention

I am looking for an Applescript that:
1: Prompts and allows the user to select one or more Apple Mail email messages from within Mail (10.4, 10.5, 10.6).
2: Prompts and allows the user to select a save-to folder.
3: For each message, saves it as a PDF file in the save-to folder, using the following naming convention for the PDF file:
"YYYY-MM-DD HH.MM.SS Email From FIRSTNAME LASTNAME - SUBJECT",
"YYYY-MM-DD HH.MM.SS Email To FIRSTNAME LASTNAME - SUBJECT",
where in the email date-sent stamp (if I am the sender) or date-received stamp (if I am the recipient):
YYYY = the year
MM = the two-digit month
DD = the two-digit day
HH = the two-digit hour (in 24-hour time)
MM = the two-digit minute
SS = the two-digit second
FIRSTNAME is the email sender's first name for email that I receive (or is the email recipient's first name for email that I send)
LASTNAME is the email sender's last name for email that I receive (or is the email recipient's first name for email that I send)
SUBJECT = the email's subject line
For example: 2010-04-10 16.32.48 Email From Kris Ryan - Status Of Payroll Updates.pdf
For example: 2010-04-10 16.33.55 Email To Sue Anderson - RE Status Of Payroll Updates.pdf (Colon omitted after "RE".)
4: For each attachment to the message, saves it as a PDF file in the same directory using the naming convention:
"YYYY-MM-DD HH.MM.SS Email From FIRSTNAME LASTNAME Z Attachment - NUMBER - FILENAME",
where:
YYYY-MM-DD HH.MM.SS Email From FIRSTNAME LASTNAME = as above
NUMBER = an integer representing the attachment number (1, 2, ...) sorted according to filename alphabetical order
FILENAME = the name of the file attached to the email, including its extension (.docx, .xlsx, etc.)
The letter "Z" sorts the attachment PDFs after its respective parent email in the directory.
For example: 2010-04-10 16.32.48 Email From Kris Ryan Z Attachment - 1 - List Of Suggestions To Moore.doc.pdf
For example: 2010-04-10 16.32.48 Email From Kris Ryan Z Attachment - 2 - Proposed Salary Adjustments.xls.pdf
For example: 2010-04-10 16.32.48 Email From Kris Ryan Z Attachment - 3 - Salary History.pps.pdf
Note: The email attachment may consist of a PDF or MS Office file (Word, Excel, Power Point); however, a smart implementation will be able to handle any attachment kind. If the attachment is a PDF file, then save it "as is" using the stipulated naming convention, without passing it through Distiller.
Thank you.
Kurt Todoroff

Well, that's quite a spec sheet.
Here's a start, you can easily edit the script to get what you need:
<pre style="
font-family: Monaco, 'Courier New', Courier, monospace;
font-size: 10px;
font-weight: normal;
margin: 0px;
padding: 5px;
border: 1px solid #000000;
width: 720px; height: 340px;
color: #000000;
background-color: #E6E6EE;
overflow: auto;"
title="this text can be pasted into the AppleScript Editor">
Set a Mail Rule to Save Message and Attachment to Desktop.
To save attachments to another another folder on the desktop (i.e. Attachments) create the folder and then
change tell application "Finder" to set pathToAttachments to (path to desktop folder as string) & "Attachments:"
using terms from application "Mail"
on perform mail action with messages theMessages
tell application "Finder" to set ptd to (path to desktop folder) as string
tell application "Finder" to set pathToAttachments to (path to desktop folder) as string
tell application "Mail"
repeat with theMessage in theMessages
set d_recd to date received of theMessage as string
set d_recd to ReplaceText(d_recd, ":", " ") of me
set d_recd to ReplaceText(d_recd, ",", " ") of me
set theText to content of theMessage
if theMessage's mail attachments is not {} then
repeat with theAttachment in theMessage's mail attachments
set theFileName to pathToAttachments & (theMessage's subject) & " (Attachment From " & (theMessage's sender) & " Sent " & d_recd & ")" & space & theAttachment's name
try
save theAttachment in theFileName
on error errnum
end try
end repeat
end if
set theFile to ptd & (theMessage's subject) & " (From " & (theMessage's sender) & " Sent " & d_recd & ")" & ".txt"
set theFileID to open for access file theFile with write permission
write theText to theFileID
close access theFileID
end repeat
end tell
end perform mail action with messages
end using terms from
on ReplaceText(theString, fString, rString)
set current_Delimiters to text item delimiters of AppleScript
set AppleScript's text item delimiters to fString
set sList to every text item of theString
set AppleScript's text item delimiters to rString
set newString to sList as string
set AppleScript's text item delimiters to current_Delimiters
return newString
end ReplaceText</pre>

Naming Convention

Hi there
I'd be interested in hearing from others who use a naming convention for their photo files. I'm planning a major reorganisation of my files & would appreciate hearing from others what's worked for them.
Thanks
Stephen

I use a fairly lengthy naming convention that predates my use of PSE's Organizer. Some characters are obviously non-essential. The others let me know what subdirectory holds the image, the date filed, and what the origin was (digital, slide, or negative). It goes like this:
Character Content
1 R (as in roll)
2-4 "roll" sequence number
5 type - D for digital, S for slide, N for negative
6 _ (underscore)
7-10 year
11-12 month
13-14 day
15 _ (underscore)
16-17 or 18 image sequence number
My subdirectories are named using the first 14 characters.
So an image gets a name like R298D_20051213_027.jpg, and if I write the file name on the back of a print, I can quickly locate the file on the hard drive, and the neg/slide in my binders/boxes. The slide/file binders/boxes are marked with the roll sequence numbers. I use a program called "Bulk Rename Utility" to rename the images before letting the PSE organizer see them. This precludes importing to PSE directly from the camera or card reader, but I don't do that for other reasons as well.
The utility may be found at www.bulkrenameutility.co.uk or www.jimwillsher.co.uk.
Hey - it works for me!

Image naming convention

Hi,
I want to know the naming conventions used for image files in iPhone and iPad.
I've seen it's like
name~iphone.png
name@2x~iphone.png
name~ipad.png
name@2x~ipad.png
What about iPhone 5? How are we going to name images created for iPhone 5.
I have seen some thing like this [email protected] What is this 568h is?
And also if I have images for landscape and portrait mode separately how can I reflect it in the file name? Is there any convention for that?
I'm using story boards to create my UI. If I have these images in the project, does it automatically load the correct image to load depending on these names or do we have to write code to load image correctly for retina version and normal version and correct iphone version etc..
Thanks

568h i believe is because the images is 568 points in (h)eight
if it was non-retina that would be 568pixels.
at the moment iphone doesnt support landscape launch images. For the iPad, however, you use:
Default-Portrait.png                      768 x 1004
Default-Landscape.png              1024 x 748 pixels
[email protected]             536 x 2008 pixels
[email protected]       2048 x 1496 pixels
When you drag images with these names in to your project xcode automatically assigns them as the launch images. You can double check by viewing the summary tab for your project target.
Click the top most folder in the left hand pane. then in the right hand click the name of your app under "target", then click the summary tab. You can also drag and drop files into these "buckets" if they are name incorectly.

File name naming convention in File Adapter configuration in ID

Hi All ,
I have a query related to xml filename created in IDOC-XI-FILE scenario based on value of one of IDOC field .
The scenario is like this :
I have to send one xml file per store for material master . In this case how can I define my file name with store name in File adapter configuration in ID .
Naming convention should be
<storename>_date_masterdataname.xmlwhere store name is one of field of IDOC .
Plz help me .
Thanks in Advance
Regards
Prabhat Ranjan

Hi Prabhat,
take a look at this weblog:
/people/jayakrishnan.nair/blog/2005/06/28/dynamic-file-namexslt-mapping-with-java-enhancement-using-xi-30-sp12-part-ii
you have to specify variable substitution
(in the file adapter)
and give the path to the store name (in the variable sustitution table)
you file name schema (from the file communication channel can look like this)
%storename%_date_masterdataname.xml
Regards,
michal
Message was edited by: Michal Krawczyk

.tpz files naming convention / export from PI 7.0

Hi,
When I export the repository or Directory content from PI 7.0 the naming convention PI gives its own naming convention. Starting wit XI3_0 * .tpz
Why does it start with XI3_0*.tpz for we have PI 7.0?
Do we need to change any Visual admin or exchange profile parameter to get the naming convention to PI7_0*.tpz
Thanks
Sachin

Hi,
The import and export functionality of XI 7.0 uses the expression 'XI 3.0' instead of 'XI 7.0' in all transport screens of the Integration Builder. Furthermore the name of XI 7.0 exports will always start with the prefix 'XI_3_0' and not 'XI_7_0'.
Reason and Prerequisites
The reason for this behaviour is that the transport code and format of XI 7.0 and XI 3.0 is identical.
Solution
There is no fix for the naming convention, but there is a positive consequence: XI 3.0 export files can be produced by XI 3.0 and XI 7.0 and can be imported into XI 3.0 and XI 7.0.
Refrence Note
Note 936254 - XI 3.0 Imports and Export in XI 7.0
Award points if helpful.
Thanks,
Tanuj

Output CSV File Naming Convention - Receiver File Adapter

Dear SAP experts,
I need help regarding my scenario.
My scenario is this, Customer will send EDI message to XI. XI will then translate the message and convert it into XML.. After, a Receiver File Adapter will receive the XML then convert it into .csv file.
I've already configured the Receiver File Adapter to convert the XML into .csv file.
But, my problem now is how will I configure to have my output .csv file has a File Naming Convention.
The output .csv file must be "CustomerName_YearMonthDate".
From the EDI message, there is indicated Sender GLN in which, each customer has its own Sender GLN.
E.g., Globus --> 200, Karstadt --> 300, Metro --> 400.
How will I configure so that I can have an output .csv file of,
If Globus sends the EDI message, the output .csv file is Globus_20080304.csv.
If Karstadt, Karstadt_20080304.csv.
If Metro, Metro_20080304.csv.
Kindly advise for a clear and complete solution.
Thank you very much for your usual support.
Fred

Hi Nisar,
My target message (XML) in the mapping is this,
- <ns0:CSV>
 - <SLI>
 <PERIO> </PERIO>
 <ILN> </ILN?
 <EAN> </EAN>
perio, iln, and ean was rooted on SLI field. and the CSV is the rootnode of the target message.
I have created a UDF on the message mapping to accomodate the output customer name, here is the codes:
String fname="";
if(GLN.equals("23456"))
fname ="Globus" +dat;
else if(GLN.equals("5678"))
fname ="Karstadt"+dat;
else if(GLN.equals("6789"))
fname ="Metro"+dat;
DynamicConfiguration conf = (DynamicConfiguration) container
 .getTransformationParameters()
 .get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create(
 "http://sap.com/xi/XI/System/File",
 "FileName");
 conf.put(key,fname );
E.g.,
Globus --> 23456 (Sender GLN)
Karstadt --> 5678 (Sender GLN)
Metro --> 6789 (Sender GLN)
This UDF i've made in the Message Mapping was mapped in the root node CSV.
Is this UDF correct?
Then on the File Receiver Configurations, here are the configs,
Transport Protocol: File System (NFS)
Message Protocol: File Content Conversion
Adapter Engine: Integration Server
File Access Parameters
Target Directory: /var/opt/gsss/sample/csv
File Name Scheme: .csv
Processing Parameters
File Construction Mode: Create
- Overwrite Existing File
Write Mode: Directly
File Type: Text
Variable Substitution --> ???
Adapter Specific Message Attributes
- Use Adapter-Specific Message Attributes
- Fail if Adapter-Specific Message Attributes Missing
- File Name
Run Operating System Command After Message Processing
Command Line: chmod 664%F
Content Conversion Parameters
Recordset Structure: SLI
SLI.addHeaderLine: 3
SLI.headerLine: PERIO;ILN;EAN
SLI.fieldSeparator: ;
SLI.endSeparator: 'nl'
Adapter Status:
Status: Active
Kindly advise if my configs are correct.
Thank you very much!
Fred

No error generated if batch process load file uses wrong naming convention

Another interesting one...
When using the batch processing functionality of FDM, which can be executed by either:
- FDM Workbench (manually)
- Hyperion FDM Task Manager (scheduled)
- upsShell.exe (scheduled and executed from a batch script)
..., one has to name the data file (to be loaded) using a specific file naming convention (i.e. "A~LOCATION~CATEGORY~PERIOD~RA.csv" format, for example). However, if one does not name the file correctly and then tries to process the file using batch processing functionality using any of the above three methods, FDM happily moves the file out of the OpenBatch folder and into a new folder, but the file is not loaded as it does not know where to map it to (as expected). However, there are no errors in Outbox\Logs\<username>.err to inform the user, so one is non the wiser that anything has gone wrong!
When using FDM Workbench, an error is displayed on the screen (POV - "Batch Completed With Errors, ( 1 ) Files Contained Errors"), but this is the only indication of any error. And normally, one would be scheduling the load using upsShell.exe or Hyperion FDM Task Manager anyway...
Has anyone else noticed this, or am I doing something wrong here? :-)

Yes, as per my original post the only feedback on any POV errors appears to be when using the FDM Workbench Batch Processing GUI.
Regarding the "Batch Process Report in FDM" you mentioned, are you referring to Analysis | Timeline accessible via FDM web client? Unfortunately this does not appear to provide much in the way of detail or errors, only general events that occurred. I cannot locate any batch process report, other than the log output I defined when calling upsShell.exe. However, this contains no POV errors...

Flatfile conversion with output file has a NAMING CONVENTION

Dear SAP experts,
I need some advise regarding my scenario.
I am converting a message into flatfile. (customized .csv)
But, the output .csv flatfile must have a naming convention.
E.g. Globus_20071020 (Customer name_YearMonthDate)
Can somebody give me ideas/inputs on what will I configure in File Receiver (FCC) in order to have an output file having a naming convention indicated above.
Or do i need additional configurations?
Please advise.
Thank you very much in advance.
Fred

Hi,
You could pass this kind of File name from mapping at runtime or
You could use the variable substitutions to create the fiel neame as per naming convention as adding date .
With reference to Variables youcould set file name as Globus_%payload.<Date>%
Pass the value in date field of payload
Refer
Variable Substitution
How to use Variable substituion
/people/sameer.shadab/blog/2005/09/23/an-interesting-usage-of-variable-substitution-in-xi
/people/sravya.talanki2/blog/2005/08/11/solution-to-the-problem-encountered-using-variable-substitution-with-xi-sp12
how to use attributes in variable substitution???:(
Dynamic file name
/people/jayakrishnan.nair/blog/2005/06/20/dynamic-file-name-using-xi-30-sp12-part--i --> Dynamic File Name using XI 3.0 SP12 Part I
/people/jayakrishnan.nair/blog/2005/06/28/dynamic-file-namexslt-mapping-with-java-enhancement-using-xi-30-sp12-part-ii --> Dynamic file name(XSLT Mapping with Java Enhancement) using XI 3.0 SP12 Part -II
Dynamic File name in File adapter
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
1. In the sender file adapter , select Adapter Specific Attributes --> FileName.
2. Use the code in this link to read the filename inside a UDF in your mapping.
DynamicConfiguration conf = (DynamicConfiguration) container
.getTransformationParameters()
.get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create(
http://sap.com/xi/XI/System/File,
FileName);
String filename = conf.get(key);
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/03612cdecc6e76e10000000a422035/content.htm
Thanks
Swarup

Custom naming convention with File Adapter

Within my BPEL process, I am using File Adapter and writing out a file. The current naming convention only all some static string with either a sequence (%SEQ%) or some sort of system timestamp. I wonder if it is possible to use some runtime data (data value within the Process Variables) as part of the file name being written out.

Hi, the file/FTP adapters support file metadata such as filename and directory to the BPEL process and exclude the payload. set the UseHeaders parameter to true in the file adapter WSDL.
*<jca:operation*
PhysicalDirectory=""
ActivationSpec="oracle.tip.adapter.file.inbound.FileActivationSpec"
PhysicalArchiveDirectory=""
DeleteFile="true"
IncludeFiles=""
PollingFrequency=""
MinimumAge="0"
OpaqueSchema="false" >
UseHeaders="true"
*</jca:operation>*
thanks.

Data file naming convention!

Hi,
My question might be silly but I am not sure about the naming convention of my control/log/dbf file. I am oracle 11g and asm is configured with OMF enabled. When I checked the filename, I am getting filename with some numbers. What is that number refers to.
ASMCMD> ls
EXAMPLE.265.790927371
ONKAR.267.791219239
SYSAUX.257.790927221
SYSTEM.256.790927219
UNDOTBS1.258.790927221
USERS.259.790927223
ASMCMD> Could anyone please tell me what these numbers represents? I tried google but did not got any reasonable answers.
-Onkar

sybrand_b wrote:
I just searched the documentation on your behalf (as you know, the documentation is that what most people here refuse to read and avoid at all cost)
and came up with http://docs.oracle.com/cd/E11882_01/server.112/e25494/omf003.htm#ADMIN11492
by simply typing 'Oracle Managed Files' in the search bar.
I think ASM naming is different from OMF. The default OMF % formats are not used with the fully qualified name. its an ASM system generated dotted pair in the format
+diskgroup/dbname/filetype/filetypetag.file.incarnation
http://docs.oracle.com/cd/E11882_01/server.112/e18951/asmfiles.htm#i1010333
EDIT: cross post with previous poster. same info.
Edited by: deebee_eh on Aug 13, 2012 11:22 AM

Naming convention in template css file

Similar Messages

Maybe you are looking for