Naming convention ofstrucure

can any one tell me the naming convention of the structure

hi Vikram,
It depends on the standards provided by customer .... our customer normally suggest us to declare this way ... i.e, s_struct .... you can use the same ..
Regards,.
Santosh

Similar Messages

Storage Location Naming Convention without WM!

Dear all
We are facing serious problem in our Storage Location for Raw Material.
We have 4 types of Raw Material Seating (S), Panel (P), Metal (M), Wood (W). And they are all stored under Storage Location: RWSL.
Requirement:
Although we have visual guideline as to which industrial rack will store the type of Material, it is insufficient. We need a more refined storage location down to which BIN of the rack we will put the Raw Material.
Due to limited time and resource, we cannot have WM implemented right now. Thus, we have come out with 2 alternative to overcome this problem:
Alternative 01:
We will use the Fixed Bin field in Storage Data 02 by putting the Bin number assigned to each Rack.
E.g. For Seating material code:SEAT01, we will maintain the Fixed Bin as R12A01/A02, it means this Seating material SEAT01 will be stored at Rack 12, fixed bin A01 or A02.
Question to Alternative 01: Will it cause problem in GR, GR, Transfer Posting and Stock Count?
Alternative 02:
Instead of going into details to put Fixed Bin field in Storage Data 2, we will abandan the existing Storage Location RMSL by introducing new format for Storage Location
Here is the example of Alternative 02:
For raw materials, we will use 4 digits location numbers, consistent with other Storage locations, the 4 digits storage location will start with u201CR _ _ _u201D to represent each location
And,
R _ _ _ is:
R = Raw materials
2nd digit = Division (S= Seating, P =Panel, W=Wood, M=Metal and W=Wood)
3rd digit = Rack Number (A, B, C, Du2026 and etc.)
4th digit = Rack Zone - each rack will broken down into zone, each rack can possibility have 2 to 3 zone. 1 Zone can be 1 colume of the Rack
An example of a possible location and its meaning will be
RSA1 = Raw materials warehouse, Seating division, Rack A, Zone 1
RPB3 = Raw materials warehouse, Panel Division, Rack B, Zone 3
The challenge of this is that instead of having 1 Raw Material Storage Location like RMSL, we will have a lot more storage locations each for division of Raw material due to the Rack Number we have as well as the Rack Zone.
Question to Alternative 02:
If we use this alternative, will it impact our future implementation of WM? From design wise, is it feasible?
Please advise what is the best approach and the feasible design on it.
Many thanks in advance.
Edited by: Daimos on May 13, 2009 10:15 AM

Hi, here is the Pro and Co of both approaches:
Method 01: Use existing SLOC and add the Storage Bin info
e.g. SLOC: STM1
         Storage Bin: RSC3, where RS = Rack Seating, C3 = column 3
Pro 01:
It will cause less effort as we only need to use LSMW for material master to add in the Storage Bin data for all material of SCM.
Pro 02:
I have tested out that in TCode MIGO, apart from SLOC, the pertaining Storage Bin data also appear. Based on my discuss with Xian Chen, sometimes they use MB1C(GR), MB1A(GI) rather than MIGO due to speed issue, I will need to check the field status if can have Storage Bin field APPEAR, if can, it will solve the problem
Con 01:
The Storage Bin information will only appear in MMBE (Stock Overview) but will not appear in the standard SAP Inventory Report (e.g. MB52 Warehouse Stock). To view it from SAP Inventory Report, we may need to customize the standard report to show the new field Storage Bin. It needs Abap effort.
Con 02:
We must have a very good naming convention for Storage Bin. And again, in the above example, if a material is put in SLOC STM1 at Storage Bin RA A1 or C4, it will set a very rigid rule in the future if we need to change it, as I fear that one the Storage Bin has been used up. It will not allow us to change (need to do testing to find out)
Con 03:
Do we have the time to define all the Storage Bin for each SLOC? Operation wise, the store personnel needs to design it
Method 02: Use the new SLOC
Pro 01:
RSA1 = Raw materials warehouse, Seating division, Rack A, Zone 1. More organized. Easy to tell the material is at which Rack and which Zone of the Rack.
Assumption:
01. we must not have too many rack for one Seating division and also not too many Zone for each
      Division, else it will cause confusion
02. 1 material should stick to 1 Rack 1 zone as much as possible, else later the PP consultant will
     have hard to to perform GI due to too many SLOC assigned to a material.
Pro 02:
In report wise, we are able to show the SLOC in inventory report. No need to enhance the existing inventory report as we do not use Storage Bin.
Con 01:
If there are too many SLOC creation due to it. It may cause problem for PP perform GI as too many selection available for a material. This can be avoided if stick to the General Rule that one material is tied with one SLOC.
Edited by: Daimos on May 16, 2009 5:07 AM

File name naming convention in File Adapter configuration in ID

Hi All ,
I have a query related to xml filename created in IDOC-XI-FILE scenario based on value of one of IDOC field .
The scenario is like this :
I have to send one xml file per store for material master . In this case how can I define my file name with store name in File adapter configuration in ID .
Naming convention should be
<storename>_date_masterdataname.xmlwhere store name is one of field of IDOC .
Plz help me .
Thanks in Advance
Regards
Prabhat Ranjan

Hi Prabhat,
take a look at this weblog:
/people/jayakrishnan.nair/blog/2005/06/28/dynamic-file-namexslt-mapping-with-java-enhancement-using-xi-30-sp12-part-ii
you have to specify variable substitution
(in the file adapter)
and give the path to the store name (in the variable sustitution table)
you file name schema (from the file communication channel can look like this)
%storename%_date_masterdataname.xml
Regards,
michal
Message was edited by: Michal Krawczyk

Is it possible to control the naming convention used by Aperture when importing photos? If so, how

When I import photos from my camera, I have them placed into projects based on the date the photos were taken. However, I do not like the naming convention used by Aperture as it causes the projects to sort into a non-chronologial order. The convention is MMM-DD-YYYY and I want to change it to YYYY-MM-DD. Is it possible in Aperture 3.2.4 to do this?

In the Import panel you can edit the preset for the file name format to "Image year - image month - image day - index" for example; the preset for folder names seems to be gone in Aperture 3,3 - at least I cannot find it any longer. You only seem to be able to enter the folder name manually in the Import panel.

Best practice for naming convention in BI 7.0

Hi All,
Is there a Best Parctice document for naming convention in BI 7.0?
Thanks,
S.B

hi,
chk this links...
http://help.sap.com/saphelp_nw04/helpdata/en/ba/83343ea7ff6a38e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/da/0318025d64a84b94542641ed77ee74/frameset.htm
hope this helps,
partha

Looking for best practice on naming conventions

Does anyone out there have a best practice on naming conventions that they could share.
I'm starting to find the need to create objects and associated variables and actions.
I can see this getting very messy, very quickly and would love to learn if someone has come up with a good set of guidelines that are both easy to follow and make perfect sense. (I know....what a balance to ask for!)
Thanks
Alan

Hi Alan,
Welcome to Adobe Community.
There are couple of things that you can keep in mind while naming objects.
When creating custom text caption styles, be sure to follow the correct naming conventions. Each caption style has a unique name, and you must
use this name at the beginning of each associated bitmap filename. For example, if you create a text caption style named “Brightblue,” the five
bitmap images that constitute the new style should be named as follows:
Brightblue1.bmp, an image with no callouts
Brightblue2.bmp, an image with a callout to the right or upper-right
Brightblue3.bmp, an image with a callout to the left or upper-left
Brightblue4.bmp, an image with a callout to the lower right
Brightblue5.bmp, an image with a callout to the lower left
Flash button-naming conventions
Each SWF button contains three layers: a button, an icon, and an action layer.
The SWF filename consists of the following elements:
Acronym for playback control (“pbc”)
Playback element identifier (“Btn” for button, “Bar” for bar, and so on)
Name of the button (“play”).
Hope this helps!
Thanks!

Inconsistent naming conventions for Adobe Reader in software scan

I just want to see if anyone knows why Adobe's free pdf Reader appears both as "Adobe Reader" AND "Adobe Acrobat Reader". I manage software licenses for an organization of 400+, and it's difficult to know if, for instance Adobe Acrobat - Reader 6.0.2 Update - 6.0.2, should or should not be counted as a purchased license without actually visiting each workstation to verify. I've spoken with our network operations personnel and they confirmed that it is not manually entered by our personnel, but that it is something in the software. ??
Furthermore, why are the naming conventions not consistent even among those that can be identified easily? The list below is what I see when I run a report for all Adobe software on our network.
Adobe Acrobat - Reader 6.0.2 Update - 6.0.2
Adobe Acrobat 4.0 - 4.0
Adobe Acrobat 5 -- SC Install
Adobe Acrobat 5.0
Adobe Acrobat 5.0 - 5.0
Adobe Acrobat 5.0 - 5.1
Adobe Acrobat 5.0 SC Support
Adobe Acrobat 6.0 Professional - 006.000.000
Adobe Acrobat 6.0 Standard - 006.000.000
Adobe Acrobat 6.0.1 Professional - 006.000.001
Adobe Acrobat 6.0.1 Standard - 006.000.001
Adobe Acrobat 7.0 Professional - 7.0.0
Adobe Acrobat 7.0.1 and Reader 7.0.1 Update - 7.0.2
Adobe Acrobat 7.0.2 and Reader 7.0.2 Update - 7.0.3
Adobe Acrobat 7.0.3 and Reader 7.0.3 Update - 7.0.4
Adobe Acrobat 7.0.5 Professional - 7.0.5
Adobe Acrobat 7.0.7 Professional - 7.0.7
Adobe Acrobat 7.0.8 Professional - 7.0.8
Adobe Acrobat and Reader 6.0.3 Update - 6.0.3
Adobe Acrobat and Reader 6.0.4 Update - 6.0.4
Adobe Acrobat and Reader 6.0.5 Update - 6.0.5
Adobe Acrobat Reader 3.01
Adobe Acrobat Reader for Pocket PC 1.0
Adobe Reader 6.0 - 6.0
Adobe Reader 6.0.1 - 006.000.001
Adobe Reader 7.0 - 7.0.0
Adobe Reader 7.0.5 - 7.0.5
Adobe Reader 7.0.5 Language Support - 7.0.5
Adobe Reader 7.0.7 - 7.0.7
Adobe Reader 7.0.8 - 7.0.8
Adobe Reader Chinese Simplified Fonts - 1.0
Adobe Reader Japanese Fonts - 1.0
Adobe Reader Korean Fonts - 1.0
If anyone can answer this, I'd appreciate it. Thanks.

Junlie et al,
Starting with Acrobat 9 (announced on 6/2/08), Adobe will support the new ISO/IEC 19770-2 standard for universal software tagging. The new standard will allow customers to correctly identify the name, version, type and licensing status of Adobe software (starting with the Acrobat 9 family and later on as new versions of the products are introduced later this and next year).
I DO understand your frustration with the in consistencies in the naming of our software, but the problem of software discovery goes well beyond our lack of discipline. This is one of the many reasons why Adobe invested time and effort with the industry group defining the new open standard, and in software asset management in general.
More information about tagging standard can be found here: http://www.agnitioadvisors.com/info/content/view/44/1/
- Juan-Carlos

.tpz files naming convention / export from PI 7.0

Hi,
When I export the repository or Directory content from PI 7.0 the naming convention PI gives its own naming convention. Starting wit XI3_0 * .tpz
Why does it start with XI3_0*.tpz for we have PI 7.0?
Do we need to change any Visual admin or exchange profile parameter to get the naming convention to PI7_0*.tpz
Thanks
Sachin

Hi,
The import and export functionality of XI 7.0 uses the expression 'XI 3.0' instead of 'XI 7.0' in all transport screens of the Integration Builder. Furthermore the name of XI 7.0 exports will always start with the prefix 'XI_3_0' and not 'XI_7_0'.
Reason and Prerequisites
The reason for this behaviour is that the transport code and format of XI 7.0 and XI 3.0 is identical.
Solution
There is no fix for the naming convention, but there is a positive consequence: XI 3.0 export files can be produced by XI 3.0 and XI 7.0 and can be imported into XI 3.0 and XI 7.0.
Refrence Note
Note 936254 - XI 3.0 Imports and Export in XI 7.0
Award points if helpful.
Thanks,
Tanuj

AppleScript To Save Messages As PDFs With Specific Naming Convention

I am looking for an Applescript that:
1: Prompts and allows the user to select one or more Apple Mail email messages from within Mail (10.4, 10.5, 10.6).
2: Prompts and allows the user to select a save-to folder.
3: For each message, saves it as a PDF file in the save-to folder, using the following naming convention for the PDF file:
"YYYY-MM-DD HH.MM.SS Email From FIRSTNAME LASTNAME - SUBJECT",
"YYYY-MM-DD HH.MM.SS Email To FIRSTNAME LASTNAME - SUBJECT",
where in the email date-sent stamp (if I am the sender) or date-received stamp (if I am the recipient):
YYYY = the year
MM = the two-digit month
DD = the two-digit day
HH = the two-digit hour (in 24-hour time)
MM = the two-digit minute
SS = the two-digit second
FIRSTNAME is the email sender's first name for email that I receive (or is the email recipient's first name for email that I send)
LASTNAME is the email sender's last name for email that I receive (or is the email recipient's first name for email that I send)
SUBJECT = the email's subject line
For example: 2010-04-10 16.32.48 Email From Kris Ryan - Status Of Payroll Updates.pdf
For example: 2010-04-10 16.33.55 Email To Sue Anderson - RE Status Of Payroll Updates.pdf (Colon omitted after "RE".)
4: For each attachment to the message, saves it as a PDF file in the same directory using the naming convention:
"YYYY-MM-DD HH.MM.SS Email From FIRSTNAME LASTNAME Z Attachment - NUMBER - FILENAME",
where:
YYYY-MM-DD HH.MM.SS Email From FIRSTNAME LASTNAME = as above
NUMBER = an integer representing the attachment number (1, 2, ...) sorted according to filename alphabetical order
FILENAME = the name of the file attached to the email, including its extension (.docx, .xlsx, etc.)
The letter "Z" sorts the attachment PDFs after its respective parent email in the directory.
For example: 2010-04-10 16.32.48 Email From Kris Ryan Z Attachment - 1 - List Of Suggestions To Moore.doc.pdf
For example: 2010-04-10 16.32.48 Email From Kris Ryan Z Attachment - 2 - Proposed Salary Adjustments.xls.pdf
For example: 2010-04-10 16.32.48 Email From Kris Ryan Z Attachment - 3 - Salary History.pps.pdf
Note: The email attachment may consist of a PDF or MS Office file (Word, Excel, Power Point); however, a smart implementation will be able to handle any attachment kind. If the attachment is a PDF file, then save it "as is" using the stipulated naming convention, without passing it through Distiller.
Thank you.
Kurt Todoroff

Well, that's quite a spec sheet.
Here's a start, you can easily edit the script to get what you need:
<pre style="
font-family: Monaco, 'Courier New', Courier, monospace;
font-size: 10px;
font-weight: normal;
margin: 0px;
padding: 5px;
border: 1px solid #000000;
width: 720px; height: 340px;
color: #000000;
background-color: #E6E6EE;
overflow: auto;"
title="this text can be pasted into the AppleScript Editor">
Set a Mail Rule to Save Message and Attachment to Desktop.
To save attachments to another another folder on the desktop (i.e. Attachments) create the folder and then
change tell application "Finder" to set pathToAttachments to (path to desktop folder as string) & "Attachments:"
using terms from application "Mail"
on perform mail action with messages theMessages
tell application "Finder" to set ptd to (path to desktop folder) as string
tell application "Finder" to set pathToAttachments to (path to desktop folder) as string
tell application "Mail"
repeat with theMessage in theMessages
set d_recd to date received of theMessage as string
set d_recd to ReplaceText(d_recd, ":", " ") of me
set d_recd to ReplaceText(d_recd, ",", " ") of me
set theText to content of theMessage
if theMessage's mail attachments is not {} then
repeat with theAttachment in theMessage's mail attachments
set theFileName to pathToAttachments & (theMessage's subject) & " (Attachment From " & (theMessage's sender) & " Sent " & d_recd & ")" & space & theAttachment's name
try
save theAttachment in theFileName
on error errnum
end try
end repeat
end if
set theFile to ptd & (theMessage's subject) & " (From " & (theMessage's sender) & " Sent " & d_recd & ")" & ".txt"
set theFileID to open for access file theFile with write permission
write theText to theFileID
close access theFileID
end repeat
end tell
end perform mail action with messages
end using terms from
on ReplaceText(theString, fString, rString)
set current_Delimiters to text item delimiters of AppleScript
set AppleScript's text item delimiters to fString
set sList to every text item of theString
set AppleScript's text item delimiters to rString
set newString to sList as string
set AppleScript's text item delimiters to current_Delimiters
return newString
end ReplaceText</pre>

Output CSV File Naming Convention - Receiver File Adapter

Dear SAP experts,
I need help regarding my scenario.
My scenario is this, Customer will send EDI message to XI. XI will then translate the message and convert it into XML.. After, a Receiver File Adapter will receive the XML then convert it into .csv file.
I've already configured the Receiver File Adapter to convert the XML into .csv file.
But, my problem now is how will I configure to have my output .csv file has a File Naming Convention.
The output .csv file must be "CustomerName_YearMonthDate".
From the EDI message, there is indicated Sender GLN in which, each customer has its own Sender GLN.
E.g., Globus --> 200, Karstadt --> 300, Metro --> 400.
How will I configure so that I can have an output .csv file of,
If Globus sends the EDI message, the output .csv file is Globus_20080304.csv.
If Karstadt, Karstadt_20080304.csv.
If Metro, Metro_20080304.csv.
Kindly advise for a clear and complete solution.
Thank you very much for your usual support.
Fred

Hi Nisar,
My target message (XML) in the mapping is this,
- <ns0:CSV>
 - <SLI>
 <PERIO> </PERIO>
 <ILN> </ILN?
 <EAN> </EAN>
perio, iln, and ean was rooted on SLI field. and the CSV is the rootnode of the target message.
I have created a UDF on the message mapping to accomodate the output customer name, here is the codes:
String fname="";
if(GLN.equals("23456"))
fname ="Globus" +dat;
else if(GLN.equals("5678"))
fname ="Karstadt"+dat;
else if(GLN.equals("6789"))
fname ="Metro"+dat;
DynamicConfiguration conf = (DynamicConfiguration) container
 .getTransformationParameters()
 .get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create(
 "http://sap.com/xi/XI/System/File",
 "FileName");
 conf.put(key,fname );
E.g.,
Globus --> 23456 (Sender GLN)
Karstadt --> 5678 (Sender GLN)
Metro --> 6789 (Sender GLN)
This UDF i've made in the Message Mapping was mapped in the root node CSV.
Is this UDF correct?
Then on the File Receiver Configurations, here are the configs,
Transport Protocol: File System (NFS)
Message Protocol: File Content Conversion
Adapter Engine: Integration Server
File Access Parameters
Target Directory: /var/opt/gsss/sample/csv
File Name Scheme: .csv
Processing Parameters
File Construction Mode: Create
- Overwrite Existing File
Write Mode: Directly
File Type: Text
Variable Substitution --> ???
Adapter Specific Message Attributes
- Use Adapter-Specific Message Attributes
- Fail if Adapter-Specific Message Attributes Missing
- File Name
Run Operating System Command After Message Processing
Command Line: chmod 664%F
Content Conversion Parameters
Recordset Structure: SLI
SLI.addHeaderLine: 3
SLI.headerLine: PERIO;ILN;EAN
SLI.fieldSeparator: ;
SLI.endSeparator: 'nl'
Adapter Status:
Status: Active
Kindly advise if my configs are correct.
Thank you very much!
Fred

Regarding file naming convention(while publishing a file to FTP)

Hi,
In one of our usecases, we need to configure the file name based on the client’s requirement.(to place the file in FTP. But the file name should be customized by us.) We referred to the link given below.
http://www.b2bgurus.com/2008/04/customizing-file-naming-convention-in.html
Can you please briefly explain about where should we setup the 'macro' so that we can change the file name(which will be placed in FTP) as we like.
Thanks,
Shanmuga S.
Edited by: user655473 on 16 Oct, 2008 11:42 AM

Hi,
     As you said we had applied the patch(number 7233222).In the Transport parameter, we entered the values for 'filename format' as given in the link,
     http://www.b2bgurus.com/2008/04/customizing-file-naming-convention-in.html.
     But we couldn't put the file in FTP.
     Our usecase is to send file(with customized name) to FTP.
     Before applying the patch, this scenario works fine and we could put the file into FTP. In this case the default file name is '%FROM_PARTY%_%TIMESTAMP%.dat'.
     After applying the patch (number 7233222), we got the entry 'filename format' in 'Transport parameter'. There the default value is given as '%FROM_PARTY%_%TIMESTAMP%.dat'. But in this flow(after applying patch) we couldn't put the file in FTP. No error logs were seen in b2b.log file.
     In 'b2b_dc_transport.log' file, we were getting the following logs,
     "2008.10.17 at 19:47:16:273: Thread-20: (DEBUG) FTPAgent.login(): Enter
     2008.10.17 at 19:47:16:273: Thread-20: (DEBUG) Host name is 'PC022350.cts.com'.
     2008.10.17 at 19:47:16:289: Thread-20: (DEBUG) Host PC022350.cts.com FTP command: USER sss
     2008.10.17 at 19:47:16:289: Thread-20: (DEBUG) FTP Command: USER, reply:
     331 Password required for sss
     2008.10.17 at 19:47:16:289: Thread-20: (DEBUG) Host PC022350.cts.com FTP command: PASS
     2008.10.17 at 19:47:16:289: Thread-20: (DEBUG) FTP Command: PASS, reply:
     230 Logged on
     2008.10.17 at 19:47:16:289: Thread-20: (DEBUG) FTPAgent.login(): Exit
     2008.10.17 at 19:47:16:289: Thread-20: (DEBUG) Host PC022350.cts.com FTP command: PASV
     2008.10.17 at 19:47:16:289: Thread-20: (DEBUG) FTP Command: PASV, reply:
     227 Entering Passive Mode (10,232,65,97,7,197)
     2008.10.17 at 19:47:16:289: Thread-20: (DEBUG) Passive: ip = 10.232.65.97, port = 1989
     2008.10.17 at 19:47:16:289: Thread-20: (STATUS) Connecting to PC022350.cts.com:1989
     2008.10.17 at 19:47:16:289: Thread-20: (DEBUG) Host PC022350.cts.com FTP command: NLST /FTP/Acme
     2008.10.17 at 19:47:16:289: Thread-20: (DEBUG) FTP Command: NLST, reply:
     150 Connection accepted
     2008.10.17 at 19:47:16:304: Thread-20: (ERROR) FTPClient.listNames(): LIST REPLY: 226
     2008.10.17 at 19:47:16:304: Thread-20: (DEBUG) Disconnecting from PC022350.cts.com
     2008.10.17 at 19:47:16:304: Thread-20: (DEBUG) Host PC022350.cts.com disconnected."
     Please help us in resolving this issue.
Thanks,
Shanmuga S.
Edited by: ShanmugaS on 17 Oct, 2008 7:51 PM
Edited by: ShanmugaS on 17 Oct, 2008 7:52 PM

Variable naming conventions

Hi all,
I come from a mostly JAVA background. Big emphasis in that arena on encapsulation and modularization of code to help facilitate ease of maintenance and reuse...in theory I sometimes struggle with variable naming conventions within my ABAP code because I'm not all together certain there are any. In C or C++ I might use a derivation of Hungarian notation to name varaibles...and in JAVA I might observe certain object oriented rules regarding varaible naming...I find myself using a combination of those two protocols in my ABAP code. Does anyone have any suggestions for how I might name global and lcoal variables within my code?
regards,
Mat

Hi,
Please check this links perhaps they may help.
http://help.sap.com/saphelp_nw04/helpdata/en/92/c2b084bc1d11d2958700a0c94260a5/content.htm
https://websmp101.sap-ag.de/~sapdownload/011000358700004455192006E/NameConventions.pdf
http://help.sap.com/saphelp_nw04/helpdata/en/2a/6b0b1f547a11d189600000e829fbbd/content.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/011ccf90-0201-0010-92a7-b319adf89b73
http://web.mit.edu/sapr3/dev/newdevstand.html
Regards,
Ferry Lianto

Class naming convention

many a times i face difficulty with the Action/Class naming convention.
Say, today ..i wrote a class.....tomorrow i have to rename the name of the class so that it becomes a more meaningful name and becomes unique and understandable with the newcomer classes.
...just to do this, i had to change the name of the class very frequently.
Though i follow few conventions like :
1) First letter of the class is Captial letter.
2) use names which is relevant with the classs's functionality.
but still i fall in problem....
say, i want to populate a DataBase with my class.....whats the name i should keep ? tommorrow i am going to write another class which also populate the database . what do i do ?
i first rename the old class with some meaningful name and then i write the new class with some other meaningful name.....but this kills time.....demands lots of changes....and so on...
you know, i get trouble when my number of classes increases.
do u feel the same ?
what are the rules (NOT JAVA RULES but meaningful rules) i should remember to keep a class name ?

You can name a class based on what it supposed to
do...
while naming it follow conventions like the ones
which are mentioned in the code
conventions/guidelines of your project.
You will not be writing the same functionality in two
different classes... would you??
In case you may need to refractor(rename the class
name) you may use java editor with refractoring
capability to do it..
With most of the java editors, you get this
functionality.. e.g. doing a Alt+Shift+R would
refractor your selected method, class, field etc...
This applies to Eclipse
>
Hope that helps..
Vaibhav

Naming conventions to store automation testing scripts

Hi,
Can anyone provide the solution for Naming conventions to store automation testing scripts in oracle application testing suite?
Regards,
Sairam

Hi Sairam
There are no naming conventions you can call them anything you like.
Regards
Alex

No error generated if batch process load file uses wrong naming convention

Another interesting one...
When using the batch processing functionality of FDM, which can be executed by either:
- FDM Workbench (manually)
- Hyperion FDM Task Manager (scheduled)
- upsShell.exe (scheduled and executed from a batch script)
..., one has to name the data file (to be loaded) using a specific file naming convention (i.e. "A~LOCATION~CATEGORY~PERIOD~RA.csv" format, for example). However, if one does not name the file correctly and then tries to process the file using batch processing functionality using any of the above three methods, FDM happily moves the file out of the OpenBatch folder and into a new folder, but the file is not loaded as it does not know where to map it to (as expected). However, there are no errors in Outbox\Logs\<username>.err to inform the user, so one is non the wiser that anything has gone wrong!
When using FDM Workbench, an error is displayed on the screen (POV - "Batch Completed With Errors, ( 1 ) Files Contained Errors"), but this is the only indication of any error. And normally, one would be scheduling the load using upsShell.exe or Hyperion FDM Task Manager anyway...
Has anyone else noticed this, or am I doing something wrong here? :-)

Yes, as per my original post the only feedback on any POV errors appears to be when using the FDM Workbench Batch Processing GUI.
Regarding the "Batch Process Report in FDM" you mentioned, are you referring to Analysis | Timeline accessible via FDM web client? Unfortunately this does not appear to provide much in the way of detail or errors, only general events that occurred. I cannot locate any batch process report, other than the log output I defined when calling upsShell.exe. However, this contains no POV errors...

Naming convention ofstrucure

Similar Messages

Maybe you are looking for