NaN/PathRefnum? function producing useless answers for Path, Refnum
I have found similar threads to this, but not quite the same, AFAICT.
I'm trying simply to see if an INI file exists, so I created the following snippet:
I also created a small file, put it in my C:\ directory, which I have attached here.
When I run the LV program with C:\test.ini, my indicators come out as NaN/Path?: False, NaN/Refnum?: True
which I tried to interpret as (1) a valid path (file exists) and (2) a nonexisting refnum (although the refnum came from an LV-supplied subVI).
I then changed the control (file to find) to C:\test.in (lopped off final "i") and the two indicators gave me the same results. That blew away my first interpretation, and I can't come up with anything else which makes sense.
So, for paths and refnums, what is going on here, if anything?
I did see that the second test threw an error from the "Open Config Data" subVI, so I can use that for my test, but I'd like to know if the NaN... function is actually good for anything but numbers. If not, IMHO LV should change its designation on the palette.
Cameron
To err is human, but to really foul it up requires a computer.
The optimist believes we are in the best of all possible worlds - the pessimist fears this is true.
Profanity is the one language all programmers know best.
An expert is someone who has made all the possible mistakes.
To learn something about LabVIEW at no extra cost, work the online LabVIEW tutorial(s):
LabVIEW Unit 1 - Getting Started
Learn to Use LabVIEW with MyDAQ
Solved!
Go to Solution.
Attachments:
test.ini 1 KB
Thanks, Nathand,
That clears it up a lot (and then digging down into the layers below the "Open Config Data" VI brings back the opacity). That's just one of the things which has confused me about the Config File VIs subpalette, but the explanation and the fact that you have to use a special "Not a Config Data Refnum.vi" with these instead of the normal "NaN/Path/Refnum?" (I never saw it until you pointed it out) answers several of the other questions, too. Like I said at first, in this case I just wanted to see if the file was there, so there are alternatives. But when I need to do more than what the prepackaged VIs do (which I expect I will), then it's just a matter of digging down in with my hip boots on. (Yuck.) But it's all fun, or I wouldn't be doing it in the first place.
Cameron
To err is human, but to really foul it up requires a computer.
The optimist believes we are in the best of all possible worlds - the pessimist fears this is true.
Profanity is the one language all programmers know best.
An expert is someone who has made all the possible mistakes.
To learn something about LabVIEW at no extra cost, work the online LabVIEW tutorial(s):
LabVIEW Unit 1 - Getting Started
Learn to Use LabVIEW with MyDAQ
Similar Messages
-
PATH and UNDER_path functions in ORACLE 11gR2 for Windows.
I am now getting the error -01405 when I use the function and predicate PATH UNDER_PATH path_string use the parameter function. If instead you use a literal value everything works fine. I found that if I delete from the list select the same path expression works well. example:
SELECT PATH(1), e.xmldata.dispname FROM xdb.xdb$resource e
WHERE UNDER_PATH(VALUE(e),funcionRetornaUnPath,1) = 1
!!!!Error ora - 01405
SELECT PATH(1), e.xmldata.dispname FROM xdb.xdb$resource e
WHERE UNDER_PATH(VALUE(e),'/pathxxxx',1) = 1
!!!! OK.
SELECT e.xmldata.dispname FROM xdb.xdb$resource e
WHERE UNDER_PATH(VALUE(e),funcionRetornaUnPath,1) = 1
!!! Ok.
Thank´s
Edited by: 900197 on 01-dic-2011 11:34Hi,
First of all, you shouldn't be using XDB$RESOURCE directly but RESOURCE_VIEW or PATH_VIEW instead.
It doesn't solve the problem entirely but there's no error if we declare the function DETERMINISTIC.
However the PATH function returns NULL :
SQL> create or replace function fnc_test return varchar2
2 deterministic
3 is
4 begin
5 return '/public';
6 end;
7 /
Function created
SQL> select path(1), v.any_path
2 from resource_view v
3 where under_path(v.res, fnc_test(), 1) = 1
4 ;
PATH(1) ANY_PATH
/public/dump
Could you post again in the {forum:id=34} forum?
Thanks. -
View or function to return the full path hierarchy of an organization
Hi,
The customer is asking to provide a report showing for each assignment of each employees the corresponding organization where it is assigned and the full path of the organization hierarchy.
The organization hierarchy is at most 6 level deep, so they want to produce the report with the columns:
root_organization | org_level1 | org_level2 | org_level3 | org_level4 | org_level5 | org_level6 | person_name | assignment_date
if the person is assigned in an organization lower than the 6th level, the remainin columns should be empty.
I see that the view HRFG_ORGANIZATION_HIERARCHIES returns only one step in the organizations hierarchy: Parent_organization_name, Child_organization_name.
Is there any view or function as well which returns the full path of an organization in the hierarchy? At least a function which returns the full path parents of the organization delimited by commas.
Thank youHi,
Yes, I wrote a custom code but is running a bit slowly for around 1000 organizations and more than 15 version of hierarcy (so 15000 rows of this view). I wanted to know if there is any optimized code provided by Oracle.
Thank you. -
Function module to find the path of application server
Hi can any one say me what is the function module to find the path of the application server
Hi ,
What i understand from ur question is that u need path for application server from the presentation layer i.e user screen.
u can achive the path this way
parameter: file type filename-fileintern.
when user presses F4 here, it will show the directories and path in the AL11.
I didnt find any FM which will get the path of Al11.
revrt back if any issues,
Regards,
Naveen -
Can any one give me answer for these questions
Can any one give me answer for these questions. I got these questions from net plz post the answers you know
ABAP CERTIFICATION QUESTIONS
1. If a table does not have MANDT as part of the primary key, it is ____.
A: A structure
B: Invalid
C: Client-independent
D: Not mandatory
2. In regard to CALL, which of the following is NOT a valid statement?
A: CALL FUNCTION
B: CALL SCREEN
C: CALL TRANSACTION
D: CALL PROGRAM
3. Name the type of ABAP Dictionary table that has these characteristics:
Same number of fields as the database table
Same name as database table
Maps 1:1 to database table
A: Pooled
B: Cluster
C: Transparent
D: View
4. An event starts with an event keyword and ends with:
A: Program execution.
B: END-OF-EVENT.
C: Another event keyword.
D: END-EVENT.
5. What is the system field for the current date?
A: SY-DATUM
B: SY-DATE
C: SY-DATID
D: SY-SDATE
6. The following code indicates:
SELECT fld1 fld2 FROM tab1 APPENDING TABLE itab
WHERE fld1 IN sfld1.
A: Add rows to the existing rows of itab.
B: Add rows to itab after first deleting any existing rows of itab.
C: Select rows from tab1 for matching itab entries.
D: Nothing, this is a syntax error.
7. You may change the following data object as shown below so that it equals 3.14.
CONSTANTS: PI type P decimals 2 value '3.1'.
PI = '3.14'.
A: True
B: False
8. The SAP service that ensures data integrity by handling locking is called:
A: Update
B: Dialog
C: Enqueue/Dequeue
D: Spool
9. Which of these sentences most accurately describes the GET VBAK LATE. event?
A: This event is processed before the second time the GET VBAK event is processed.
B: This event is processed after all occurrences of the GET VBAK event are completed.
C: This event will only be processed after the user has selected a basic list row.
D: This event is only processed if no records are selected from table VBAK.
10. Which of the following is not a true statement in regard to a hashed internal table type?
A: Its key must always be UNIQUE.
B: May only be accessed by its key.
C: Response time for accessing a row depends on the number of entries in the table.
D: Declared using internal table type HASHED TABLE.
11. TO include database-specific SQL statements within an ABAP program, code them between:
A: NATIVE SQL_ENDNATIVE.
B: DB SQL_ENDDB.
C: SELECT_ENDSELECT.
D: EXEC SQL_ENDEXEC.
12. To measure how long a block of code runs, use the ABAP statement:
A: GET TIME .
B: SET TIME FIELD .
C: GET RUN TIME FIELD .
D: SET CURSOR FIELD .
13. When a secondary list is being processed, the data of the basic list is available by default.
A: True
B: False
14. Given:
DATA: BEGIN OF itab OCCURS 10,
qty type I,
END OF itab.
DO 25 TIMES. itab-qty = sy-index. APPEND itab. ENDDO.
LOOP AT itab WHERE qty > 10.
WRITE: /1 itab-qty.
ENDLOOP.
This will result in:
A: Output of only those itab rows with a qty field less than 10
B: Output of the first 10 itab rows with a qty field greater than 10
C: A syntax error
D: None of the above
15. After a DESCRIBE TABLE statement SY-TFILL will contain
A: The number of rows in the internal table.
B: The current OCCURS value.
C: Zero, if the table contains one or more rows.
D: The length of the internal table row structure.
16. You may declare your own internal table type using the TYPES keyword.
A: True
B: False
17. After adding rows to an internal table with COLLECT, you should avoid adding more rows with APPEND.
A: True
B: False
18. Which of the following is not a component of control break processing when looping at an internal table?
A: AT START OF
B: AT FIRST
C: AT LAST
D: AT NEW
19. A dictionary table is made available for use within an ABAP program via the TABLES statement.
A: True
B: False
20. Which of the following would be best for hiding further selection criteria until a function is chosen?
A: AT NEW SELECTION-SCREEN
B: SELECTION-SCREEN AT LINE-SELECTION
C: SUBMIT SELECTION-SCREEN
D: CALL SELECTION-SCREEN
21. What must you code in the flow logic to prevent a module from being called unless a field contains a non-initial value (as determined by its data type)?
A: ON INPUT
B: CHAIN
C: FIELD
D: ON REQUEST
22. The AT USER-COMMAND event is triggered by functions defined in the ____.
A: screen painter
B: ABAP report
C: menu painter status
D: ABAP Dictionary
23. In regard to a function group, which of the following is NOT a true statement?
A: Combines similar function modules.
B: Shares global data with all its function modules.
C: Exists within the ABAP workbench as an include program.
D: Shares subroutines with all its function modules.
24. In regard to SET PF-STATUS, you can deactivate unwanted function codes by using ____.
A: EXCLUDING
B: IMMEDIATELY
C: WITHOUT
D: HIDE
25. In regard to data transported in PAI when the FIELD statement is used, which of the following is NOT a true statement?
A: Fields in PBO are transported directly from PAI.
B: Fields with identical names are transported to the ABAP side.
C: Fields not defined in FIELD statements are transported first.
D: Fields that are defined in FIELD statements are transported when their corresponding module is called.
26. The order in which an event appears in the ABAP code determines when the event is processed.
A: True
B: False
27. A field declared as type T has the following internal representation:
A: SSMMHH
B: HHMMSS
C: MMHHSS
D: HHSSMM
28. Which of the following is NOT a component of the default standard ABAP report header?
A: Date and Time
B: List title
C: Page number
D: Underline
29. Assuming a pushbutton with function code 'FUNC' is available in the toolbar of a list report, what event is processed when the button is clicked?
A: AT USER-COMMAND.
B: AT PFn.
C: AT SELECTION-SCREEN.
D: END-OF-SELECTION.
30. In regard to field selection, what option of the SELECT statement is required?
A: FOR ALL ENTRIES
B: WHERE
C: INTO
D: MOVE-CORRESPONDING
31. The following program outputs what?
report zjgtest1
write: /1 'Ready_'.
PARAMETER: test.
INITIALIZATION.
write: /1 'Set_'.
START-OF-SELECTION.
write: /1 'GO!!'.
A: Set_ GO!! (each on its own line)
B: Set_ Ready_ GO!! (all on their own lines)
C: Ready_ GO!! (each on its own line)
D: Ready_ Set_ GO!! (all on their own lines)
32. To declare a selection criterion that does not appear on the selection screen, use:
A: NO-DISPLAY
B: INVISIBLE
C: MODIF ID
D: OBLIGATORY
33. An internal table that is nested within another internal table should not contain a header line.
A: True
B: False
34. What is output by the following code?
DATA: BEGIN OF itab OCCURS 0, letter type c, END OF itab.
itab-letter = 'A'. APPEND itab. itab-letter = 'B'. APPEND itab.
itab-letter = 'C'. APPEND itab. itab-letter = 'D'. APPEND itab.
LOOP AT itab.
SY-TABIX = 2.
WRITE itab-letter.
EXIT.
ENDLOOP.
A: A
B: A B C D
C: B
D: B C D
35. To select all database entries for a certain WHERE clause into an internal table in one step, use
A: SELECT_INTO TABLE itab_
B: SELECT_INTO itab_
C: SELECT_APPENDING itab
D: SELECT_itab_
36. After a successful SELECT statement, what does SY-SUBRC equal?
A: 0
B: 4
C: 8
D: Null
37. This selection screen syntax forces the user to input a value:
A: REQUIRED-ENTRY
B: OBLIGATORY
C: DEFAULT
D: SELECTION-SCREEN EXCLUDE
38. If the following code results in a syntax error, the remedy is:
DATA: itab TYPE SORTED TABLE OF rec_type WITH UNIQUE KEY field1
WITH HEADER LINE.
itab-field1 = 'Company'. itab-field2 = '1234'. INSERT TABLE itab.
itab-field1 = 'Bank'. itab-field2 = 'ABC'. INSERT TABLE itab.
SORT itab.
LOOP AT itab.
write: /1 itab-field1, itab-field2.
ENDLOOP.
A: There is no syntax error here
B: Remove the SORT statement
C: Change INSERT to APPEND
D: Add a WHERE clause to the loop
39. If this code results in an error, the remedy is:
SELECT fld1 fld2 FROM tab1 WHERE fld3 = pfld3.
WRITE: /1 tab1-fld1, tab1-fld2.
ENDSELECT.
A: Add a SY-SUBRC check.
B: Change the WHERE clause to use fld1 or fld2.
C: Remove the /1 from the WRITE statement.
D: Add INTO (tab1-fld1, tab1-fld2).
40. When modifying an internal table within LOOP AT itab. _ ENDLOOP. you must include an index number.
A: True
B: False
41. To allow the user to enter values on the screen for a list field, use:
A: OPEN LINE.
B: SET CURSOR FIELD.
C: WRITE fld AS INPUT FIELD.
D: FORMAT INPUT ON.
42. Before a function module may be tested, it must first be:
A: Linked
B: Authorized
C: Released
D: Active
43. To include a field on your screen that is not in the ABAP Dictionary, which include program should contain the data declaration for the field?
A: PBO module include program
B: TOP include program
C: PAI module include program
D: Subroutine include program
44. If a table contains many duplicate values for a field, minimize the number of records returned by using this SELECT statement addition.
A: MIN
B: ORDER BY
C: DISTINCT
D: DELETE
45. The system internal table used for dynamic screen modification is named:
A: ITAB
B: SCREEN
C: MODTAB
D: SMOD
46. Within the source code of a function module, errors are handled via the keyword:
A: EXCEPTION
B: RAISE
C: STOP
D: ABEND
47. Which system field contains the contents of a selected line?
A: SY-CUCOL
B: SY-LILLI
C: SY-CUROW
D: SY-LISEL
48. The following statement writes what type of data object?
WRITE: /1 'Total Amount:'.
A: Text literal
B: Text variable
C: In-code comment
D: Text integer
49. For the code below, second_field is of what data type?
DATA: first_field type P, second_field like first_field.
A: P
B: C
C: N
D: D
50. Which of the following describes the internal representation of a type D data object?
A: DDMMYYYY
B: YYYYDDMM
C: MMDDYYYY
D: YYYYMMDD
51. A BDC program is used for all of the following except:
A: Downloading data to a local file
B: Data interfaces between SAP and external systems
C: Initial data transfer
D: Entering a large amount of data
52. In regard to PERFORM, which of the following is NOT a true statement?
A: May be used within a subroutine.
B: Requires actual parameters.
C: Recursive calls are allowed in ABAP.
D: Can call a subroutine in another program.
53. What is the transaction code for the ABAP Editor?
A: SE11
B: SE38
C: SE36
D: SE16
54. In regard to HIDE, which of the following is NOT a true statement?
A: Saves the contents of variables in relation to a list line's row number.
B: The hidden variables must be output on a list line.
C: The HIDE area is retrieved when using the READ LINE statement.
D: The HIDE area is retrieved when an interactive event is triggered.
55. Database locks are sufficient in a multi-user environment.
A: True
B: False
56. The complete technical definition of a table field is determined by the field's:
A: Domain
B: Field name
C: Data type
D: Data element
57. In regard to LEAVE, which of the following is NOT a true statement?
A: May be used to return immediately to a calling program.
B: May be used to stop the current loop pass and get the next.
C: May be used to start a new transaction.
D: May be used to go to the next screen.
58. The following code indicates:
SELECT fld6 fld3 fld2 fld1 FROM tab1 INTO CORRESPONDING FIELDS OF TABLE itab
WHERE fld3 = pfld3.
A: The order of the fields in itab does not matter.
B: Fill the header line of itab, but not the body.
C: Table itab can only contain fields also in table tab1.
D: None of the above.
59. The ABAP statement below indicates that the program should continue with the next line of code if the internal table itab:
CHECK NOT itab[] IS INITIAL.
A: Contains no rows
B: Contains at least one row
C: Has a header line
D: Has an empty header line
60. What will be output by the following code?
DATA: BEGIN OF itab OCCURS 0, fval type i, END OF itab.
itab-fval = 1. APPEND itab.
itab-fval = 2. APPEND itab.
FREE itab.
WRITE: /1 itab-fval.
A: 2
B: 0
C: blank
D: 1
61. To allow the user to enter a range of values on a selection screen, use the ABAP keyword:
A: DATA.
B: RANGES.
C: PARAMETERS.
D: SELECT-OPTIONS.
62. If an internal table is declared without a header line, what else must you declare to work with the table's rows?
A: Another internal table with a header line.
B: A work area with the same structure as the internal table.
C: An internal table type using the TYPES statement.
D: A PARAMETER.
63. Assuming an internal table contains 2000 entries, how many entries will it have after the following line of code is executed?
DELETE itab FROM 1500 TO 1700.
A: This is a syntax error.
B: 1801
C: 1800
D: 1799
64. To remove lines from a database table, use ____.
A: UPDATE
B: MODIFY
C: ERASE
D: DELETE
65. All of the following may be performed using SET CURSOR except:
A: Move the cursor to a specific field on a list.
B: Move the cursor to a specific list line.
C: Move the cursor to a specific pushbutton, activating that function.
D: Move the cursor to a specific row and column on a list.
66. When is it optional to pass an actual parameter to a required formal parameter of a function module?
A: The actual parameter is type C.
B: The formal parameter contains a default value.
C: The formal parameter's \"Reference\" attribute is turned on.
D: It is never optional.
67. Coding two INITIALIZATION events will cause a syntax error.
A: True
B: False
68. Adding a COMMIT WORK statement between SELECT_ENDSELECT is a good method for improving performance.
A: True
B: False
69. To save information on a list line for use after the line is selected, use this keyword.
A: APPEND
B: EXPORT
C: WRITE
D: HIDE
70. To bypass automatic field input checks, include this in PAI.
A: AT EXIT-COMMAND
B: ON INPUT
C: ON REQUEST
D: LEAVE TO SCREEN 0.
71. Within a function module's source code, if the MESSAGE_RAISING statement is executed, all of the following system fields are filled automatically except:
A: SY-MSGTY
B: SY-MSGNO
C: SY-MSGV1
D: SY-MSGWA
72. The following code indicates:
REPORT ZLISTTST.
START-OF-SELECTION.
WRITE: text-001.
FORMAT HOTSPOT ON.
WRITE: text-002.
FORMAT HOTSPOT OFF.
AT LINE-SELECTION.
WRITE / text-003.
A: Text-002 may not be selected.
B: The value of text-002 is stored in a special memory area.
C: Text-002 may be clicked once to trigger the output of text-003.
D: None of the above.
73. The ____ type of ABAP Dictionary view consists of one or more transparent tables and may be accessed by an ABAP program using Open SQL.
A: Database view
B: Projection view
C: Help view
D: Entity view
74. A concrete field is associated with a field-symbol via ABAP keyword
A: MOVE
B: WRITE
C: ASSIGN
D: VALUE
75. The output for the following code will be:
report zabaprg.
DATA: char_field type C.
char_field = 'ABAP data'.
WRITE char_field.
A: ABAP data
B: A
C: Nothing, there is a syntax error
D: None of the above
76. Page footers are coded in the event:
A: TOP-OF-PAGE.
B: END-OF-SELECTION.
C: NEW-PAGE.
D: END-OF-PAGE.
77. The event AT SELECTION-SCREEN OUTPUT. occurs before the selection screen is displayed and is the best event for assigning default values to selection criteria.
A: True
B: False
78. The TABLES statement declares a data object.
A: True
B: False
79. Assuming tab1-fld7 is not a key field, how can you prevent reading all the table rows?
SELECT fld1 fld2 fld3 FROM tab1 INTO (fld4, fld5, fld6)
WHERE fld7 = pfld7.
WRITE: /1 fld4, fld5, fld6.
ENDSELECT.
A: Take fld7 out of the WHERE clause.
B: Create an index in the ABAP Dictionary for tab1-fld7.
C: Use INTO TABLE instead of just INTO.
D: Take the WRITE statement out of the SELECT_ENDSELECT.
80. Which of the following is NOT a required attribute when creating an ABAP program?
A: Application
B: Title
C: Status
D: Type
81. When creating a transparent table in the ABAP Dictionary, which step automatically creates the table in the underlying database?
A: Adding technical settings to the table
B: Checking the table syntax
C: Saving the table
D: Activating the table
82. Within the ABAP program attributes, Type = 1 represents:
A: INCLUDE program
B: Online program
C: Module pool
D: Function group
E: Subroutine pool
83. If this code results in an error, the remedy is:
SELECT fld1 SUM( fld1 ) FROM tab1 INTO_
A: Remove the spaces from SUM( fld1 ).
B: Move SUM( fld1 ) before fld1.
C: Add GROUP BY f1.
D: Change to SUM( DISTINCT f1 ).
84. Which keyword adds rows to an internal table while accumulating numeric values?
A: INSERT
B: APPEND
C: COLLECT
D: GROUP
85. Assuming itab has a header line, what will be output by the following code?
READ TABLE itab INDEX 3 TRANSPORTING field1.
WRITE: /1 itab-field1, itab-field2.
A: The contents of the third row's itab-field1.
B: The contents of the third row's itab-field1 and itab-field2.
C: The contents of the third row's itab-field2.
D: Nothing.
86. The following code indicates:
SELECTION-SCREEN BEGIN OF BLOCK B1.
PARAMETERS: myparam(10) type C,
Myparam2(10) type N,
SELECTION-SCREEN END OF BLOCK.
A: Draw a box around myparam and myparam2 on the selection screen.
B: Allow myparam and myparam2 to be ready for input during an error dialog.
C: Do not display myparam and myparam2 on the selection screen.
D: Display myparam and myparam2 only if both fields have default values.
87. Which statement will sort the data of an internal table with fields FRUIT, QTY, and PRICE so that it appears as follows?
FRUIT QTY PRICE
Apples 12 22.50
Apples 9 18.25
Oranges 15 17.35
Bananas 20 10.20
Bananas 15 6.89
Bananas 5 2.75
A: SORT itab DESCENDING BY QTY PRICE.
B: SORT itab BY PRICE FRUIT.
C: SORT itab.
D: SORT itab BY PRICE DESCENDING.
88. Which keyword adds a line anywhere within an internal table?
A: APPEND
B: MODIFY
C: ADD
D: INSERT
89. To read a single line of an internal table, use the following:
A: LOOP AT itab. _ ENDLOOP.
B: READ itab.
C: SELECT SINGLE * FROM itab.
D: READ TABLE itab.
90. Which Open SQL statement should not be used with cluster databases?
A: UPDATE
B: MODIFY
C: DELETE
D: INSERT
91. To include a field on your screen that is not in the ABAP Dictionary, which include program should contain the data declaration for the field?
A: PBO module include program
B: TOP include program
C: PAI module include program
D: Subroutine include program
92. This flow logic statement is used to make multiple fields open for input after an error or warning message.
A: GROUP
B: FIELD-GROUP
C: CHAIN
D: LOOP AT SCREEN
93. Given:
PERFORM subroutine USING var.
The var field is known as what type of parameter?
A: Formal
B: Actual
C: Static
D: ValueANSWERS :
1. If a table does not have MANDT as part of the primary key, it is ____.
A: A structure
B: Invalid
C: Client-independent
D: Not mandatory
Ans : C
2. In regard to CALL, which of the following is NOT a valid statement?
A: CALL FUNCTION
B: CALL SCREEN
C: CALL TRANSACTION
D: CALL PROGRAM
Ans : D
3. Name the type of ABAP Dictionary table that has these characteristics:
Same number of fields as the database table
Same name as database table
Maps 1:1 to database table
A: Pooled
B: Cluster
C: Transparent
D: View
Ans : C
4. An event starts with an event keyword and ends with:
A: Program execution.
B: END-OF-EVENT.
C: Another event keyword.
D: END-EVENT.
Ans: C
5. What is the system field for the current date?
A: SY-DATUM
B: SY-DATE
C: SY-DATID
D: SY-SDATE
Ans : A
6. The following code indicates:
SELECT fld1 fld2 FROM tab1 APPENDING TABLE itab
WHERE fld1 IN sfld1.
A: Add rows to the existing rows of itab.
B: Add rows to itab after first deleting any existing rows of itab.
C: Select rows from tab1 for matching itab entries.
D: Nothing, this is a syntax error.
Ans : B
7. You may change the following data object as shown below so that it equals 3.14.
CONSTANTS: PI type P decimals 2 value '3.1'.
PI = '3.14'.
A: True
B: False
Ans : B
8. The SAP service that ensures data integrity by handling locking is called:
A: Update
B: Dialog
C: Enqueue/Dequeue
D: Spool
Ans : C
9. Which of these sentences most accurately describes the GET VBAK LATE. event?
A: This event is processed before the second time the GET VBAK event is processed.
B: This event is processed after all occurrences of the GET VBAK event are completed.
C: This event will only be processed after the user has selected a basic list row.
D: This event is only processed if no records are selected from table VBAK.
Ans :
10. Which of the following is not a true statement in regard to a hashed internal table type?
A: Its key must always be UNIQUE.
B: May only be accessed by its key.
C: Response time for accessing a row depends on the number of entries in the table.
D: Declared using internal table type HASHED TABLE.
Ans : C
11. TO include database-specific SQL statements within an ABAP program, code them between:
A: NATIVE SQL_ENDNATIVE.
B: DB SQL_ENDDB.
C: SELECT_ENDSELECT.
D: EXEC SQL_ENDEXEC.
Ans : D
12. To measure how long a block of code runs, use the ABAP statement:
A: GET TIME .
B: SET TIME FIELD .
C: GET RUN TIME FIELD .
D: SET CURSOR FIELD .
Ans : C
13. When a secondary list is being processed, the data of the basic list is available by default.
A: True
B: False
Ans : B
14. Given:
DATA: BEGIN OF itab OCCURS 10,
qty type I,
END OF itab.
DO 25 TIMES. itab-qty = sy-index. APPEND itab. ENDDO.
LOOP AT itab WHERE qty > 10.
WRITE: /1 itab-qty.
ENDLOOP.
This will result in:
A: Output of only those itab rows with a qty field less than 10
B: Output of the first 10 itab rows with a qty field greater than 10
C: A syntax error
D: None of the above
Ans : B
15. After a DESCRIBE TABLE statement SY-TFILL will contain
A: The number of rows in the internal table.
B: The current OCCURS value.
C: Zero, if the table contains one or more rows.
D: The length of the internal table row structure.
Ans ; A
16. You may declare your own internal table type using the TYPES keyword.
A: True
B: False
Ans : A
17. After adding rows to an internal table with COLLECT, you should avoid adding more rows with APPEND.
A: True
B: False
Ans : A
18. Which of the following is not a component of control break processing when looping at an internal table?
A: AT START OF
B: AT FIRST
C: AT LAST
D: AT NEW
Ans : A
19. A dictionary table is made available for use within an ABAP program via the TABLES statement.
A: True
B: False
Ans : A
20. Which of the following would be best for hiding further selection criteria until a function is chosen?
A: AT NEW SELECTION-SCREEN
B: SELECTION-SCREEN AT LINE-SELECTION
C: SUBMIT SELECTION-SCREEN
D: CALL SELECTION-SCREEN
Ans : D
21. What must you code in the flow logic to prevent a module from being called unless a field contains a non-initial value (as determined by its data type)?
A: ON INPUT
B: CHAIN
C: FIELD
D: ON REQUEST
Ans : A
22. The AT USER-COMMAND event is triggered by functions defined in the ____.
A: screen painter
B: ABAP report
C: menu painter status
D: ABAP Dictionary
Ans : C
23. In regard to a function group, which of the following is NOT a true statement?
A: Combines similar function modules.
B: Shares global data with all its function modules.
C: Exists within the ABAP workbench as an include program.
D: Shares subroutines with all its function modules.
Ans ; C
24. In regard to SET PF-STATUS, you can deactivate unwanted function codes by using ____.
A: EXCLUDING
B: IMMEDIATELY
C: WITHOUT
D: HIDE
Ans : A
25. In regard to data transported in PAI when the FIELD statement is used, which of the following is NOT a true statement?
A: Fields in PBO are transported directly from PAI.
B: Fields with identical names are transported to the ABAP side.
C: Fields not defined in FIELD statements are transported first.
D: Fields that are defined in FIELD statements are transported when their corresponding module is called.
Ans ; C
26. The order in which an event appears in the ABAP code determines when the event is processed.
A: True
B: False
Ans : B
27. A field declared as type T has the following internal representation:
A: SSMMHH
B: HHMMSS
C: MMHHSS
D: HHSSMM
Ans : B
28. Which of the following is NOT a component of the default standard ABAP report header?
A: Date and Time
B: List title
C: Page number
D: Underline
Ans ; A
29. Assuming a pushbutton with function code 'FUNC' is available in the toolbar of a list report, what event is processed when the button is clicked?
A: AT USER-COMMAND.
B: AT PFn.
C: AT SELECTION-SCREEN.
D: END-OF-SELECTION.
Ans : A
30. In regard to field selection, what option of the SELECT statement is required?
A: FOR ALL ENTRIES
B: WHERE
C: INTO
D: MOVE-CORRESPONDING
Ans : B
31. The following program outputs what?
report zjgtest1
write: /1 'Ready_'.
PARAMETER: test.
INITIALIZATION.
write: /1 'Set_'.
START-OF-SELECTION.
write: /1 'GO!!'.
A: Set_ GO!! (each on its own line)
B: Set_ Ready_ GO!! (all on their own lines)
C: Ready_ GO!! (each on its own line)
D: Ready_ Set_ GO!! (all on their own lines)
Ans : C
32. To declare a selection criterion that does not appear on the selection screen, use:
A: NO-DISPLAY
B: INVISIBLE
C: MODIF ID
D: OBLIGATORY
Ans : A
33. An internal table that is nested within another internal table should not contain a header line.
A: True
B: False
Ans : B
34. What is output by the following code?
DATA: BEGIN OF itab OCCURS 0, letter type c, END OF itab.
itab-letter = 'A'. APPEND itab. itab-letter = 'B'. APPEND itab.
itab-letter = 'C'. APPEND itab. itab-letter = 'D'. APPEND itab.
LOOP AT itab.
SY-TABIX = 2.
WRITE itab-letter.
EXIT.
ENDLOOP.
A: A
B: A B C D
C: B
D: B C D
Ans : A
35. To select all database entries for a certain WHERE clause into an internal table in one step, use
A: SELECT_INTO TABLE itab_
B: SELECT_INTO itab_
C: SELECT_APPENDING itab
D: SELECT_itab_
36. After a successful SELECT statement, what does SY-SUBRC equal?
A: 0
B: 4
C: 8
D: Null
Ans : A
37. This selection screen syntax forces the user to input a value:
A: REQUIRED-ENTRY
B: OBLIGATORY
C: DEFAULT
D: SELECTION-SCREEN EXCLUDE
Ans : B
38. If the following code results in a syntax error, the remedy is:
DATA: itab TYPE SORTED TABLE OF rec_type WITH UNIQUE KEY field1
WITH HEADER LINE.
itab-field1 = 'Company'. itab-field2 = '1234'. INSERT TABLE itab.
itab-field1 = 'Bank'. itab-field2 = 'ABC'. INSERT TABLE itab.
SORT itab.
LOOP AT itab.
write: /1 itab-field1, itab-field2.
ENDLOOP.
A: There is no syntax error here
B: Remove the SORT statement
C: Change INSERT to APPEND
D: Add a WHERE clause to the loop
Ans :
39. If this code results in an error, the remedy is:
SELECT fld1 fld2 FROM tab1 WHERE fld3 = pfld3.
WRITE: /1 tab1-fld1, tab1-fld2.
ENDSELECT.
A: Add a SY-SUBRC check.
B: Change the WHERE clause to use fld1 or fld2.
C: Remove the /1 from the WRITE statement.
D: Add INTO (tab1-fld1, tab1-fld2).
Ans : D
40. When modifying an internal table within LOOP AT itab. _ ENDLOOP. you must include an index number.
A: True
B: False
Ans : A
41. To allow the user to enter values on the screen for a list field, use:
A: OPEN LINE.
B: SET CURSOR FIELD.
C: WRITE fld AS INPUT FIELD.
D: FORMAT INPUT ON.
Ans : C
42. Before a function module may be tested, it must first be:
A: Linked
B: Authorized
C: Released
D: Active
Ans : D
43. To include a field on your screen that is not in the ABAP Dictionary, which include program should contain the data declaration for the field?
A: PBO module include program
B: TOP include program
C: PAI module include program
D: Subroutine include program
Ans : B
44. If a table contains many duplicate values for a field, minimize the number of records returned by using this SELECT statement addition.
A: MIN
B: ORDER BY
C: DISTINCT
D: DELETE
Ans : C
45. The system internal table used for dynamic screen modification is named:
A: ITAB
B: SCREEN
C: MODTAB
D: SMOD
Ans : B
46. Within the source code of a function module, errors are handled via the keyword:
A: EXCEPTION
B: RAISE
C: STOP
D: ABEND
Ans : A
47. Which system field contains the contents of a selected line?
A: SY-CUCOL
B: SY-LILLI
C: SY-CUROW
D: SY-LISEL
Ans : D
48. The following statement writes what type of data object?
WRITE: /1 'Total Amount:'.
A: Text literal
B: Text variable
C: In-code comment
D: Text integer
Ans : A
49. For the code below, second_field is of what data type?
DATA: first_field type P, second_field like first_field.
A: P
B: C
C: N
D: D
Ans : A
50. Which of the following describes the internal representation of a type D data object?
A: DDMMYYYY
B: YYYYDDMM
C: MMDDYYYY
D: YYYYMMDD
Ans : A
51. A BDC program is used for all of the following except:
A: Downloading data to a local file
B: Data interfaces between SAP and external systems
C: Initial data transfer
D: Entering a large amount of data
Ans : A
52. In regard to PERFORM, which of the following is NOT a true statement?
A: May be used within a subroutine.
B: Requires actual parameters.
C: Recursive calls are allowed in ABAP.
D: Can call a subroutine in another program.
Ans : B
53. What is the transaction code for the ABAP Editor?
A: SE11
B: SE38
C: SE36
D: SE16
Ans : B
54. In regard to HIDE, which of the following is NOT a true statement?
A: Saves the contents of variables in relation to a list line's row number.
B: The hidden variables must be output on a list line.
C: The HIDE area is retrieved when using the READ LINE statement.
D: The HIDE area is retrieved when an interactive event is triggered.
Ans : B
55. Database locks are sufficient in a multi-user environment.
A: True
B: False
Ans : B
56. The complete technical definition of a table field is determined by the field's:
A: Domain
B: Field name
C: Data type
D: Data element
Ans : A
57. In regard to LEAVE, which of the following is NOT a true statement?
A: May be used to return immediately to a calling program.
B: May be used to stop the current loop pass and get the next.
C: May be used to start a new transaction.
D: May be used to go to the next screen.
Ans : B
58. The following code indicates:
SELECT fld6 fld3 fld2 fld1 FROM tab1 INTO CORRESPONDING FIELDS OF TABLE itab
WHERE fld3 = pfld3.
A: The order of the fields in itab does not matter.
B: Fill the header line of itab, but not the body.
C: Table itab can only contain fields also in table tab1.
D: None of the above.
Ans : C
59. The ABAP statement below indicates that the program should continue with the next line of code if the internal table itab:
CHECK NOT itab[] IS INITIAL.
A: Contains no rows
B: Contains at least one row
C: Has a header line
D: Has an empty header line
Ans : B
60. What will be output by the following code?
DATA: BEGIN OF itab OCCURS 0, fval type i, END OF itab.
itab-fval = 1. APPEND itab.
itab-fval = 2. APPEND itab.
FREE itab.
WRITE: /1 itab-fval.
A: 2
B: 0
C: blank
D: 1
Ans : A
61. To allow the user to enter a range of values on a selection screen, use the ABAP keyword:
A: DATA.
B: RANGES.
C: PARAMETERS.
D: SELECT-OPTIONS.
Ans : D
62. If an internal table is declared without a header line, what else must you declare to work with the table's rows?
A: Another internal table with a header line.
B: A work area with the same structure as the internal table.
C: An internal table type using the TYPES statement.
D: A PARAMETER.
Ans : B
63. Assuming an internal table contains 2000 entries, how many entries will it have after the following line of code is executed?
DELETE itab FROM 1500 TO 1700.
A: This is a syntax error.
B: 1801
C: 1800
D: 1799
Ans : A
64. To remove lines from a database table, use ____.
A: UPDATE
B: MODIFY
C: ERASE
D: DELETE
Ans : D
65. All of the following may be performed using SET CURSOR except:
A: Move the cursor to a specific field on a list.
B: Move the cursor to a specific list line.
C: Move the cursor to a specific pushbutton, activating that function.
D: Move the cursor to a specific row and column on a list.
Ans : C
66. When is it optional to pass an actual parameter to a required formal parameter of a function module?
A: The actual parameter is type C.
B: The formal parameter contains a default value.
C: The formal parameter's \"Reference\" attribute is turned on.
D: It is never optional.
Ans : B
67. Coding two INITIALIZATION events will cause a syntax error.
A: True
B: False
Ans : B
68. Adding a COMMIT WORK statement between SELECT_ENDSELECT is a good method for improving performance.
A: True
B: False
Ans : B
69. To save information on a list line for use after the line is selected, use this keyword.
A: APPEND
B: EXPORT
C: WRITE
D: HIDE
Ans : D
70. To bypass automatic field input checks, include this in PAI.
A: AT EXIT-COMMAND
B: ON INPUT
C: ON REQUEST
D: LEAVE TO SCREEN 0.
Ans : A
71. Within a function module's source code, if the MESSAGE_RAISING statement is executed, all of the following system fields are filled automatically except:
A: SY-MSGTY
B: SY-MSGNO
C: SY-MSGV1
D: SY-MSGWA
Ans : D
72. The following code indicates:
REPORT ZLISTTST.
START-OF-SELECTION.
WRITE: text-001.
FORMAT HOTSPOT ON.
WRITE: text-002.
FORMAT HOTSPOT OFF.
AT LINE-SELECTION.
WRITE / text-003.
A: Text-002 may not be selected.
B: The value of text-002 is stored in a special memory area.
C: Text-002 may be clicked once to trigger the output of text-003.
D: None of the above.
Ans : C
73. The ____ type of ABAP Dictionary view consists of one or more transparent tables and may be accessed by an ABAP program using Open SQL.
A: Database view
B: Projection view
C: Help view
D: Entity view
Ans : A
74. A concrete field is associated with a field-symbol via ABAP keyword
A: MOVE
B: WRITE
C: ASSIGN
D: VALUE
Ans : C
75. The output for the following code will be:
report zabaprg.
DATA: char_field type C.
char_field = 'ABAP data'.
WRITE char_field.
A: ABAP data
B: A
C: Nothing, there is a syntax error
D: None of the above
Ans : B
76. Page footers are coded in the event:
A: TOP-OF-PAGE.
B: END-OF-SELECTION.
C: NEW-PAGE.
D: END-OF-PAGE.
Ans : D
77. The event AT SELECTION-SCREEN OUTPUT. occurs before the selection screen is displayed and is the best event for assigning default values to selection criteria.
A: True
B: False
Ans : B
78. The TABLES statement declares a data object.
A: True
B: False
Ans : A
79. Assuming tab1-fld7 is not a key field, how can you prevent reading all the table rows?
SELECT fld1 fld2 fld3 FROM tab1 INTO (fld4, fld5, fld6)
WHERE fld7 = pfld7.
WRITE: /1 fld4, fld5, fld6.
ENDSELECT.
A: Take fld7 out of the WHERE clause.
B: Create an index in the ABAP Dictionary for tab1-fld7.
C: Use INTO TABLE instead of just INTO.
D: Take the WRITE statement out of the SELECT_ENDSELECT.
Ans :
80. Which of the following is NOT a required attribute when creating an ABAP program?
A: Application
B: Title
C: Status
D: Type
Ans : A
81. When creating a transparent table in the ABAP Dictionary, which step automatically creates the table in the underlying database?
A: Adding technical settings to the table
B: Checking the table syntax
C: Saving the table
D: Activating the table
Ans : D
82. Within the ABAP program attributes, Type = 1 represents:
A: INCLUDE program
B: Online program
C: Module pool
D: Function group
E: Subroutine pool
Ans : B
83. If this code results in an error, the remedy is:
SELECT fld1 SUM( fld1 ) FROM tab1 INTO_
A: Remove the spaces from SUM( fld1 ).
B: Move SUM( fld1 ) before fld1.
C: Add GROUP BY f1.
D: Change to SUM( DISTINCT f1 ).
Ans : C
84. Which keyword adds rows to an internal table while accumulating numeric values?
A: INSERT
B: APPEND
C: COLLECT
D: GROUP
Ans : C
85. Assuming itab has a header line, what will be output by the following code?
READ TABLE itab INDEX 3 TRANSPORTING field1.
WRITE: /1 itab-field1, itab-field2.
A: The contents of the third row's itab-field1.
B: The contents of the third row's itab-field1 and itab-field2.
C: The contents of the third row's itab-field2.
D: Nothing.
Ans ; A
86. The following code indicates:
SELECTION-SCREEN BEGIN OF BLOCK B1.
PARAMETERS: myparam(10) type C,
Myparam2(10) type N,
SELECTION-SCREEN END OF BLOCK.
A: Draw a box around myparam and myparam2 on the selection screen.
B: Allow myparam and myparam2 to be ready for input during an error dialog.
C: Do not display myparam and myparam2 on the selection screen.
D: Display myparam and myparam2 only if both fields have default values.
Ans : A
87. Which statement will sort the data of an internal table with fields FRUIT, QTY, and PRICE so that it appears as follows?
FRUIT QTY PRICE
Apples 12 22.50
Apples 9 18.25
Oranges 15 17.35
Bananas 20 10.20
Bananas 15 6.89
Bananas 5 2.75
A: SORT itab DESCENDING BY QTY PRICE.
B: SORT itab BY PRICE FRUIT.
C: SORT itab.
D: SORT itab BY PRICE DESCENDING.
Ans : D
88. Which keyword adds a line anywhere within an internal table?
A: APPEND
B: MODIFY
C: ADD
D: INSERT
Ans : D
89. To read a single line of an internal table, use the following:
A: LOOP AT itab. _ ENDLOOP.
B: READ itab.
C: SELECT SINGLE * FROM itab.
D: READ TABLE itab.
Ans : D
90. Which Open SQL statement should not be used with cluster databases?
A: UPDATE
B: MODIFY
C: DELETE
D: INSERT
Ans :
91. To include a field on your screen that is not in the ABAP Dictionary, which include program should contain the data declaration for the field?
A: PBO module include program
B: TOP include program
C: PAI module include program
D: Subroutine include program
Ans : B
92. This flow logic statement is used to make multiple fields open for input after an error or warning message.
A: GROUP
B: FIELD-GROUP
C: CHAIN
D: LOOP AT SCREEN
Ans ; C
93. Given:
PERFORM subroutine USING var.
The var field is known as what type of parameter?
A: Formal
B: Actual
C: Static
D: Value
Ans : B -
Function modules or BAPI for posting plan costs for WBS Element
Hi all,
Does anyone know, whether there exists a function module or BAPI for posting plan costs to a WBS Element? K_COSTS_PLAN_PS does not work, because RKP1 is not allowed.
Greetingscheck
BAPI_COSTACTPLN_POSTACTINPUT Activity Input Planning: Posting
BAPI_COSTACTPLN_POSTACTOUTPUT Activity/Price Planning: Posting
BAPI_COSTACTPLN_POSTKEYFIGURE Stat. Key Figure Planning: Postings
BAPI_COSTACTPLN_POSTPRIMCOST Primary Cost Planning: Postings
BAPI_PDTRANSCO_POSTPRIMCOST Transfer of Planning Data: Post Primary Costs
K40C CO Actual Postings, Manual
BAPI_ACC_PRIMARY_COSTS_POST Accounting: Post Primary Costs
BAPI_COPAACTUALS_POSTCOSTDATA BAPI Operating Concern: Post Costing-Based Actua
BAPI_PRIM_COST_CHECK_AND_POST Primary Costs: Formal Parameter Check
S@meer -
No action instance for path /SubmitStudentInfoAction could be created
Hello all:
I am facing the floowing exception when use the struts with websphere 5.1
[03/11/04 21:32:15:526 AST] 6eecc29a WebGroup I SRVE0181I: [StudentRegistrationWeb.war] [StudentRegistrationWeb] [Servlet.LOG]: action: Error creating Action instance for path '/SubmitStudentInfoAction', class name 'egov.studentregistration.presentation.SubmitStudentInfoAction': java.lang.NoClassDefFoundError: Error while defining class: egov.studentregistration.presentation.SubmitStudentInfoAction
This error indicates that the class: Error while defining class: egov.common.EGovAction
This error indicates that the class: org.apache.struts.action.Action
could not be located while defining the class: egov.common.EGovAction
This is often caused by having the class at a higher point in the classloader hierarchy
Dumping the current context classloader hierarchy:
==> indicates defining classloader
*** indicates classloader where the missing class could have been found
***[0]
com.ibm.ws.classloader.CompoundClassLoader@4f440296
Local ClassPath: C:\Student Registration_\StudentRegistrationWeb\WebContent\WEB-INF\classes;C:\Student Registration_\StudentRegistrationWeb\WebContent\WEB-INF\lib\struts.jar;C:\Student Registration_\StudentRegistrationWeb\WebContent;
Delegation Mode: PARENT_FIRST
==>[1] com.ibm.ws.classloader.JarClassLoader@403620502 Local Classpath: C:\Student Registration_\EmailNotifierEJB_BUILD1\ejbModule;C:\Student Registration_\CommunicationManagerEJB_MCSAH_BUILD7\ejbModule;C:\Student Registration_\CommunicationManagerEJB_MOE_BUILD7\ejbModule;C:\Student Registration_\StudentRegistrationEJB\ejbModule;C:\Student Registration_\StudentRegistration\EGovCommonUtil_BUILD6.jar;C:\Student Registration_\StudentRegistration\Logger_Development_BUILD2.jar;C:\Student Registration_\StudentRegistration\StudentRegistrationLibrary.jar;C:\Student Registration_\StudentRegistration\EGovCommonTags_BUILD4.jar;C:\Student Registration_\StudentRegistration\EGovUserProfile_Devwas1_BUILD1.jar;C:\Student Registration_\StudentRegistration\ibmjndi.jar Delegation mode: PARENT_FIRST
[2] com.ibm.ws.classloader.ExtJarClassLoader@740475536 Local ClassPath: C:\Program Files\IBM\WebSphere Studio\Application Developer\v5.1\runtimes\base_v5\lib\app; Delegation Mode: PARENT_LAST
[3] com.ibm.ws.classloader.ProtectionClassLoader@2cefc297
[4] com.ibm.ws.bootstrap.ExtClassLoader@4ea8029e
[5] sun.misc.Launcher$AppClassLoader@4d5f029e
[6] sun.misc.Launcher$ExtClassLoader@4d5a429e
---Original exception---
java.lang.NoClassDefFoundError: org.apache.struts.action.Action
at java.lang.ClassLoader.defineClass0(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java(Compiled Code))
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java(Compiled Code))
at com.ibm.ws.classloader.CompoundClassLoader._defineClass(CompoundClassLoader.java:407)
at com.ibm.ws.classloader.CompoundClassLoader.findClass(CompoundClassLoader.java(Compiled Code))
at com.ibm.ws.classloader.CompoundClassLoader.loadClass(CompoundClassLoader.java(Compiled Code))
at java.lang.ClassLoader.loadClass(ClassLoader.java(Compiled Code))
at com.ibm.ws.classloader.ReloadableClassLoader.loadClass(ReloadableClassLoader.java:83)
at com.ibm.ws.classloader.CompoundClassLoader.loadClass(CompoundClassLoader.java(Compiled Code))
at java.lang.ClassLoader.loadClass(ClassLoader.java(Compiled Code))
at java.lang.ClassLoader.defineClass0(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java(Compiled Code))
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java(Compiled Code))
at com.ibm.ws.classloader.CompoundClassLoader._defineClass(CompoundClassLoader.java:407)
at com.ibm.ws.classloader.CompoundClassLoader.findClass(CompoundClassLoader.java(Compiled Code))
at com.ibm.ws.classloader.CompoundClassLoader.loadClass(CompoundClassLoader.java(Compiled Code))
at java.lang.ClassLoader.loadClass(ClassLoader.java(Compiled Code))
at java.lang.Class.forName1(Native Method)
at java.lang.Class.forName(Class.java(Compiled Code))
at org.apache.struts.action.ActionServlet.processActionCreate(ActionServlet.java:1631)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1577)
at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:510)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.ibm.ws.webcontainer.servlet.StrictServletInstance.doService(StrictServletInstance.java:110)
at com.ibm.ws.webcontainer.servlet.StrictLifecycleServlet._service(StrictLifecycleServlet.java:174)
at com.ibm.ws.webcontainer.servlet.IdleServletState.service(StrictLifecycleServlet.java:313)
at com.ibm.ws.webcontainer.servlet.StrictLifecycleServlet.service(StrictLifecycleServlet.java:116)
at com.ibm.ws.webcontainer.servlet.ServletInstance.service(ServletInstance.java:283)
at com.ibm.ws.webcontainer.servlet.ValidServletReferenceState.dispatch(ValidServletReferenceState.java:42)
at com.ibm.ws.webcontainer.servlet.ServletInstanceReference.dispatch(ServletInstanceReference.java:40)
at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.handleWebAppDispatch(WebAppRequestDispatcher.java:948)
at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.dispatch(WebAppRequestDispatcher.java:530)
at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.forward(WebAppRequestDispatcher.java:176)
at com.ibm.ws.webcontainer.srt.WebAppInvoker.doForward(WebAppInvoker.java:79)
at com.ibm.ws.webcontainer.srt.WebAppInvoker.handleInvocationHook(WebAppInvoker.java:201)
at com.ibm.ws.webcontainer.cache.invocation.CachedInvocation.handleInvocation(CachedInvocation.java:71)
at com.ibm.ws.webcontainer.srp.ServletRequestProcessor.dispatchByURI(ServletRequestProcessor.java:182)
at com.ibm.ws.webcontainer.oselistener.OSEListenerDispatcher.service(OSEListener.java:334)
at com.ibm.ws.webcontainer.http.HttpConnection.handleRequest(HttpConnection.java:56)
at com.ibm.ws.http.HttpConnection.readAndHandleRequest(HttpConnection.java:610)
at com.ibm.ws.http.HttpConnection.run(HttpConnection.java:431)
at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:593)
--- end Original exception----
could not be located while defining the class: egov.studentregistration.presentation.SubmitStudentInfoAction
This is often caused by having the class at a higher point in the classloader hierarchy
Dumping the current context classloader hierarchy:
==> indicates defining classloader
*** indicates classloader where the missing class could have been found
==>[0]
com.ibm.ws.classloader.CompoundClassLoader@4f440296
Local ClassPath: C:\Student Registration_\StudentRegistrationWeb\WebContent\WEB-INF\classes;C:\Student Registration_\StudentRegistrationWeb\WebContent\WEB-INF\lib\struts.jar;C:\Student Registration_\StudentRegistrationWeb\WebContent;
Delegation Mode: PARENT_FIRST
[1] com.ibm.ws.classloader.JarClassLoader@403620502 Local Classpath: C:\Student Registration_\EmailNotifierEJB_BUILD1\ejbModule;C:\Student Registration_\CommunicationManagerEJB_MCSAH_BUILD7\ejbModule;C:\Student Registration_\CommunicationManagerEJB_MOE_BUILD7\ejbModule;C:\Student Registration_\StudentRegistrationEJB\ejbModule;C:\Student Registration_\StudentRegistration\EGovCommonUtil_BUILD6.jar;C:\Student Registration_\StudentRegistration\Logger_Development_BUILD2.jar;C:\Student Registration_\StudentRegistration\StudentRegistrationLibrary.jar;C:\Student Registration_\StudentRegistration\EGovCommonTags_BUILD4.jar;C:\Student Registration_\StudentRegistration\EGovUserProfile_Devwas1_BUILD1.jar;C:\Student Registration_\StudentRegistration\ibmjndi.jar Delegation mode: PARENT_FIRST
[2] com.ibm.ws.classloader.ExtJarClassLoader@740475536 Local ClassPath: C:\Program Files\IBM\WebSphere Studio\Application Developer\v5.1\runtimes\base_v5\lib\app; Delegation Mode: PARENT_LAST
[3] com.ibm.ws.classloader.ProtectionClassLoader@2cefc297
[4] com.ibm.ws.bootstrap.ExtClassLoader@4ea8029e
[5] sun.misc.Launcher$AppClassLoader@4d5f029e
[6] sun.misc.Launcher$ExtClassLoader@4d5a429e
---Original exception---
java.lang.NoClassDefFoundError: Error while defining class: egov.common.EGovAction
This error indicates that the class: org.apache.struts.action.Action
could not be located while defining the class: egov.common.EGovAction
This is often caused by having the class at a higher point in the classloader hierarchy
Dumping the current context classloader hierarchy:
==> indicates defining classloader
*** indicates classloader where the missing class could have been found
***[0]
com.ibm.ws.classloader.CompoundClassLoader@4f440296
Local ClassPath: C:\Student Registration_\StudentRegistrationWeb\WebContent\WEB-INF\classes;C:\Student Registration_\StudentRegistrationWeb\WebContent\WEB-INF\lib\struts.jar;C:\Student Registration_\StudentRegistrationWeb\WebContent;
Delegation Mode: PARENT_FIRST
==>[1] com.ibm.ws.classloader.JarClassLoader@403620502 Local Classpath: C:\Student Registration_\EmailNotifierEJB_BUILD1\ejbModule;C:\Student Registration_\CommunicationManagerEJB_MCSAH_BUILD7\ejbModule;C:\Student Registration_\CommunicationManagerEJB_MOE_BUILD7\ejbModule;C:\Student Registration_\StudentRegistrationEJB\ejbModule;C:\Student Registration_\StudentRegistration\EGovCommonUtil_BUILD6.jar;C:\Student Registration_\StudentRegistration\Logger_Development_BUILD2.jar;C:\Student Registration_\StudentRegistration\StudentRegistrationLibrary.jar;C:\Student Registration_\StudentRegistration\EGovCommonTags_BUILD4.jar;C:\Student Registration_\StudentRegistration\EGovUserProfile_Devwas1_BUILD1.jar;C:\Student Registration_\StudentRegistration\ibmjndi.jar Delegation mode: PARENT_FIRST
[2] com.ibm.ws.classloader.ExtJarClassLoader@740475536 Local ClassPath: C:\Program Files\IBM\WebSphere Studio\Application Developer\v5.1\runtimes\base_v5\lib\app; Delegation Mode: PARENT_LAST
[3] com.ibm.ws.classloader.ProtectionClassLoader@2cefc297
[4] com.ibm.ws.bootstrap.ExtClassLoader@4ea8029e
[5] sun.misc.Launcher$AppClassLoader@4d5f029e
[6] sun.misc.Launcher$ExtClassLoader@4d5a429e
---Original exception---
java.lang.NoClassDefFoundError: org/apache/struts/action/Action
at java.lang.ClassLoader.defineClass0(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java(Compiled Code))
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java(Compiled Code))
at com.ibm.ws.classloader.CompoundClassLoader._defineClass(CompoundClassLoader.java:407)
at com.ibm.ws.classloader.CompoundClassLoader.findClass(CompoundClassLoader.java(Compiled Code))
at com.ibm.ws.classloader.CompoundClassLoader.loadClass(CompoundClassLoader.java(Compiled Code))
at java.lang.ClassLoader.loadClass(ClassLoader.java(Compiled Code))
at com.ibm.ws.classloader.ReloadableClassLoader.loadClass(ReloadableClassLoader.java:83)
at com.ibm.ws.classloader.CompoundClassLoader.loadClass(CompoundClassLoader.java(Compiled Code))
at java.lang.ClassLoader.loadClass(ClassLoader.java(Compiled Code))
at java.lang.ClassLoader.defineClass0(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java(Compiled Code))
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java(Compiled Code))
at com.ibm.ws.classloader.CompoundClassLoader._defineClass(CompoundClassLoader.java:407)
at com.ibm.ws.classloader.CompoundClassLoader.findClass(CompoundClassLoader.java(Compiled Code))
at com.ibm.ws.classloader.CompoundClassLoader.loadClass(CompoundClassLoader.java(Compiled Code))
at java.lang.ClassLoader.loadClass(ClassLoader.java(Compiled Code))
at java.lang.Class.forName1(Native Method)
at java.lang.Class.forName(Class.java(Compiled Code))
at org.apache.struts.action.ActionServlet.processActionCreate(ActionServlet.java:1631)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1577)
at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:510)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.ibm.ws.webcontainer.servlet.StrictServletInstance.doService(StrictServletInstance.java:110)
at com.ibm.ws.webcontainer.servlet.StrictLifecycleServlet._service(StrictLifecycleServlet.java:174)
at com.ibm.ws.webcontainer.servlet.IdleServletState.service(StrictLifecycleServlet.java:313)
at com.ibm.ws.webcontainer.servlet.StrictLifecycleServlet.service(StrictLifecycleServlet.java:116)
at com.ibm.ws.webcontainer.servlet.ServletInstance.service(ServletInstance.java:283)
at com.ibm.ws.webcontainer.servlet.ValidServletReferenceState.dispatch(ValidServletReferenceState.java:42)
at com.ibm.ws.webcontainer.servlet.ServletInstanceReference.dispatch(ServletInstanceReference.java:40)
at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.handleWebAppDispatch(WebAppRequestDispatcher.java:948)
at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.dispatch(WebAppRequestDispatcher.java:530)
at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.forward(WebAppRequestDispatcher.java:176)
at com.ibm.ws.webcontainer.srt.WebAppInvoker.doForward(WebAppInvoker.java:79)
at com.ibm.ws.webcontainer.srt.WebAppInvoker.handleInvocationHook(WebAppInvoker.java:201)
at com.ibm.ws.webcontainer.cache.invocation.CachedInvocation.handleInvocation(CachedInvocation.java:71)
at com.ibm.ws.webcontainer.srp.ServletRequestProcessor.dispatchByURI(ServletRequestProcessor.java:182)
at com.ibm.ws.webcontainer.oselistener.OSEListenerDispatcher.service(OSEListener.java:334)
at com.ibm.ws.webcontainer.http.HttpConnection.handleRequest(HttpConnection.java:56)
at com.ibm.ws.http.HttpConnection.readAndHandleRequest(HttpConnection.java:610)
at com.ibm.ws.http.HttpConnection.run(HttpConnection.java:431)
at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:593)
--- end Original exception----
at com.ibm.ws.classloader.CompoundClassLoader._defineClass(CompoundClassLoader.java:434)
at com.ibm.ws.classloader.CompoundClassLoader.findClass(CompoundClassLoader.java(Compiled Code))
at com.ibm.ws.classloader.CompoundClassLoader.loadClass(CompoundClassLoader.java(Compiled Code))
at java.lang.ClassLoader.loadClass(ClassLoader.java(Compiled Code))
at com.ibm.ws.classloader.ReloadableClassLoader.loadClass(ReloadableClassLoader.java:83)
at com.ibm.ws.classloader.CompoundClassLoader.loadClass(CompoundClassLoader.java(Compiled Code))
at java.lang.ClassLoader.loadClass(ClassLoader.java(Compiled Code))
at java.lang.ClassLoader.defineClass0(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java(Compiled Code))
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java(Compiled Code))
at com.ibm.ws.classloader.CompoundClassLoader._defineClass(CompoundClassLoader.java:407)
at com.ibm.ws.classloader.CompoundClassLoader.findClass(CompoundClassLoader.java(Compiled Code))
at com.ibm.ws.classloader.CompoundClassLoader.loadClass(CompoundClassLoader.java(Compiled Code))
at java.lang.ClassLoader.loadClass(ClassLoader.java(Compiled Code))
at java.lang.Class.forName1(Native Method)
at java.lang.Class.forName(Class.java(Compiled Code))
at org.apache.struts.action.ActionServlet.processActionCreate(ActionServlet.java:1631)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1577)
at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:510)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.ibm.ws.webcontainer.servlet.StrictServletInstance.doService(StrictServletInstance.java:110)
at com.ibm.ws.webcontainer.servlet.StrictLifecycleServlet._service(StrictLifecycleServlet.java:174)
at com.ibm.ws.webcontainer.servlet.IdleServletState.service(StrictLifecycleServlet.java:313)
at com.ibm.ws.webcontainer.servlet.StrictLifecycleServlet.service(StrictLifecycleServlet.java:116)
at com.ibm.ws.webcontainer.servlet.ServletInstance.service(ServletInstance.java:283)
at com.ibm.ws.webcontainer.servlet.ValidServletReferenceState.dispatch(ValidServletReferenceState.java:42)
at com.ibm.ws.webcontainer.servlet.ServletInstanceReference.dispatch(ServletInstanceReference.java:40)
at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.handleWebAppDispatch(WebAppRequestDispatcher.java:948)
at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.dispatch(WebAppRequestDispatcher.java:530)
at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.forward(WebAppRequestDispatcher.java:176)
at com.ibm.ws.webcontainer.srt.WebAppInvoker.doForward(WebAppInvoker.java:79)
at com.ibm.ws.webcontainer.srt.WebAppInvoker.handleInvocationHook(WebAppInvoker.java:201)
at com.ibm.ws.webcontainer.cache.invocation.CachedInvocation.handleInvocation(CachedInvocation.java:71)
at com.ibm.ws.webcontainer.srp.ServletRequestProcessor.dispatchByURI(ServletRequestProcessor.java:182)
at com.ibm.ws.webcontainer.oselistener.OSEListenerDispatcher.service(OSEListener.java:334)
at com.ibm.ws.webcontainer.http.HttpConnection.handleRequest(HttpConnection.java:56)
at com.ibm.ws.http.HttpConnection.readAndHandleRequest(HttpConnection.java:610)
at com.ibm.ws.http.HttpConnection.run(HttpConnection.java:431)
at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:593)
--- end Original exception----
at com.ibm.ws.classloader.CompoundClassLoader._defineClass(CompoundClassLoader.java:434)
at com.ibm.ws.classloader.CompoundClassLoader.findClass(CompoundClassLoader.java(Compiled Code))
at com.ibm.ws.classloader.CompoundClassLoader.loadClass(CompoundClassLoader.java(Compiled Code))
at java.lang.ClassLoader.loadClass(ClassLoader.java(Compiled Code))
at java.lang.Class.forName1(Native Method)
at java.lang.Class.forName(Class.java(Compiled Code))
at org.apache.struts.action.ActionServlet.processActionCreate(ActionServlet.java:1631)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1577)
at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:510)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.ibm.ws.webcontainer.servlet.StrictServletInstance.doService(StrictServletInstance.java:110)
at com.ibm.ws.webcontainer.servlet.StrictLifecycleServlet._service(StrictLifecycleServlet.java:174)
at com.ibm.ws.webcontainer.servlet.IdleServletState.service(StrictLifecycleServlet.java:313)
at com.ibm.ws.webcontainer.servlet.StrictLifecycleServlet.service(StrictLifecycleServlet.java:116)
at com.ibm.ws.webcontainer.servlet.ServletInstance.service(ServletInstance.java:283)
at com.ibm.ws.webcontainer.servlet.ValidServletReferenceState.dispatch(ValidServletReferenceState.java:42)
at com.ibm.ws.webcontainer.servlet.ServletInstanceReference.dispatch(ServletInstanceReference.java:40)
at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.handleWebAppDispatch(WebAppRequestDispatcher.java:948)
at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.dispatch(WebAppRequestDispatcher.java:530)
at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.forward(WebAppRequestDispatcher.java:176)
at com.ibm.ws.webcontainer.srt.WebAppInvoker.doForward(WebAppInvoker.java:79)
at com.ibm.ws.webcontainer.srt.WebAppInvoker.handleInvocationHook(WebAppInvoker.java:201)
at com.ibm.ws.webcontainer.cache.invocation.CachedInvocation.handleInvocation(CachedInvocation.java:71)
at com.ibm.ws.webcontainer.srp.ServletRequestProcessor.dispatchByURI(ServletRequestProcessor.java:182)
at com.ibm.ws.webcontainer.oselistener.OSEListenerDispatcher.service(OSEListener.java:334)
at com.ibm.ws.webcontainer.http.HttpConnection.handleRequest(HttpConnection.java:56)
at com.ibm.ws.http.HttpConnection.readAndHandleRequest(HttpConnection.java:610)
at com.ibm.ws.http.HttpConnection.run(HttpConnection.java:431)
at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:593)
[03/11/04 21:32:15:557 AST] 6eecc29a WebGroup E SRVE0026E: [Servlet Error]-[action]: com.ibm.ws.webcontainer.webapp.WebAppErrorReport: No action instance for path /SubmitStudentInfoAction could be created
at com.ibm.ws.webcontainer.srt.SRTServletResponseContext.sendError(SRTServletResponseContext.java:152)
at com.ibm.ws.webcontainer.srt.SRTServletResponse.sendError(SRTServletResponse.java:626)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1579)
at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:510)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.ibm.ws.webcontainer.servlet.StrictServletInstance.doService(StrictServletInstance.java:110)
at com.ibm.ws.webcontainer.servlet.StrictLifecycleServlet._service(StrictLifecycleServlet.java:174)
at com.ibm.ws.webcontainer.servlet.IdleServletState.service(StrictLifecycleServlet.java:313)
at com.ibm.ws.webcontainer.servlet.StrictLifecycleServlet.service(StrictLifecycleServlet.java:116)
at com.ibm.ws.webcontainer.servlet.ServletInstance.service(ServletInstance.java:283)
at com.ibm.ws.webcontainer.servlet.ValidServletReferenceState.dispatch(ValidServletReferenceState.java:42)
at com.ibm.ws.webcontainer.servlet.ServletInstanceReference.dispatch(ServletInstanceReference.java:40)
at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.handleWebAppDispatch(WebAppRequestDispatcher.java:948)
at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.dispatch(WebAppRequestDispatcher.java:530)
at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.forward(WebAppRequestDispatcher.java:176)
at com.ibm.ws.webcontainer.srt.WebAppInvoker.doForward(WebAppInvoker.java:79)
at com.ibm.ws.webcontainer.srt.WebAppInvoker.handleInvocationHook(WebAppInvoker.java:201)
at com.ibm.ws.webcontainer.cache.invocation.CachedInvocation.handleInvocation(CachedInvocation.java:71)
at com.ibm.ws.webcontainer.srp.ServletRequestProcessor.dispatchByURI(ServletRequestProcessor.java:182)
at com.ibm.ws.webcontainer.oselistener.OSEListenerDispatcher.service(OSEListener.java:334)
at com.ibm.ws.webcontainer.http.HttpConnection.handleRequest(HttpConnection.java:56)
at com.ibm.ws.http.HttpConnection.readAndHandleRequest(HttpConnection.java:610)
at com.ibm.ws.http.HttpConnection.run(HttpConnection.java:431)
at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:593)
[03/11/04 21:32:20:682 AST] 6eecc29a SystemOut O Note: C:\Student Registration_\.metadata\.plugins\com.ibm.etools.server.core\tmp0\cache\localhost\server1\StudentRegistration\StudentRegistrationWeb.war\_error.java uses or overrides a deprecated API. Recompile with "-deprecation" for details.
1 warning
[03/11/04 21:32:20:713 AST] 6eecc29a WebGroup I SRVE0180I: [StudentRegistrationWeb.war] [StudentRegistrationWeb] [Servlet.LOG]: /error.jsp: init
[03/11/04 21:32:20:713 AST] 6eecc29a SystemOut O Comment: You are inside the error.jsp page
[03/11/04 21:32:21:370 AST] 6eecc29a SystemOut O Ecxception during logging is
[03/11/04 21:32:21:370 AST] 6eecc29a SystemErr R [IBM][CLI Driver][DB2/NT] SQL0530N The insert or update value of the FOREIGN KEY "DB2INST1.SYSTEMERRORLOGS.FK_SYSLOGTYPE" is not equal to any value of the parent key of the parent table. SQLSTATE=23503
[03/11/04 21:32:21:370 AST] 6eecc29a SystemErr R at egov.common.logger.LoggerDAO.logRemarksToDB(LoggerDAO.java:98)
[03/11/04 21:32:21:370 AST] 6eecc29a SystemErr R at egov.common.logger.Logger.logError(Logger.java:67)
[03/11/04 21:32:21:370 AST] 6eecc29a SystemErr R at org.apache.jsp._error._jspService(_error.java:757)
[03/11/04 21:32:21:370 AST] 6eecc29a SystemErr R at com.ibm.ws.webcontainer.jsp.runtime.HttpJspBase.service(HttpJspBase.java:89)
[03/11/04 21:32:21:370 AST] 6eecc29a SystemErr R at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
[03/11/04 21:32:21:370 AST] 6eecc29a SystemErr R at com.ibm.ws.webcontainer.jsp.servlet.JspServlet$JspServletWrapper.service(JspServlet.java:357)
[03/11/04 21:32:21:370 AST] 6eecc29a SystemErr R at com.ibm.ws.webcontainer.jsp.servlet.JspServlet.serviceJspFile(JspServlet.java:675)
[03/11/04 21:32:21:370 AST] 6eecc29a SystemErr R at com.ibm.ws.webcontainer.jsp.servlet.JspServlet.service(JspServlet.java:773)
[03/11/04 21:32:21:370 AST] 6eecc29a SystemErr R at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
[03/11/04 21:32:21:370 AST] 6eecc29a SystemErr R at com.ibm.ws.webcontainer.servlet.StrictServletInstance.doService(StrictServletInstance.java:110)
[03/11/04 21:32:21:370 AST] 6eecc29a SystemErr R at com.ibm.ws.webcontainer.servlet.StrictLifecycleServlet._service(StrictLifecycleServlet.java:174)
[03/11/04 21:32:21:370 AST] 6eecc29a SystemErr R at com.ibm.ws.webcontainer.servlet.IdleServletState.service(StrictLifecycleServlet.java:313)
[03/11/04 21:32:21:370 AST] 6eecc29a SystemErr R at com.ibm.ws.webcontainer.servlet.StrictLifecycleServlet.service(StrictLifecycleServlet.java:116)
[03/11/04 21:32:21:370 AST] 6eecc29a SystemErr R at com.ibm.ws.webcontainer.servlet.ServletInstance.service(ServletInstance.java:283)
[03/11/04 21:32:21:370 AST] 6eecc29a SystemErr R at com.ibm.ws.webcontainer.servlet.ValidServletReferenceState.dispatch(ValidServletReferenceState.java:42)
[03/11/04 21:32:21:370 AST] 6eecc29a SystemErr R at com.ibm.ws.webcontainer.servlet.ServletInstanceReference.dispatch(ServletInstanceReference.java:40)
[03/11/04 21:32:21:370 AST] 6eecc29a SystemErr R at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.handleWebAppDispatch(WebAppRequestDispatcher.java:948)
[03/11/04 21:32:21:370 AST] 6eecc29a SystemErr R at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.dispatch(WebAppRequestDispatcher.java:530)
[03/11/04 21:32:21:370 AST] 6eecc29a SystemErr R at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.forward(WebAppRequestDispatcher.java:176)
[03/11/04 21:32:21:370 AST] 6eecc29a SystemErr R at com.ibm.ws.webcontainer.webapp.WebApp.handleError(WebApp.java:1029)
[03/11/04 21:32:21:370 AST] 6eecc29a SystemErr R at com.ibm.ws.webcontainer.webapp.WebApp.sendError(WebApp.java:891)
[03/11/04 21:32:21:370 AST] 6eecc29a SystemErr R at com.ibm.ws.webcontainer.srt.SRTServletResponseContext.sendError(SRTServletResponseContext.java:160)
[03/11/04 21:32:21:370 AST] 6eecc29a SystemErr R at com.ibm.ws.webcontainer.srt.SRTServletResponse.sendError(SRTServletResponse.java:626)
[03/11/04 21:32:21:370 AST] 6eecc29a SystemErr R at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1579)
[03/11/04 21:32:21:385 AST] 6eecc29a SystemErr R at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:510)
[03/11/04 21:32:21:479 AST] 6eecc29a SystemErr R at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
[03/11/04 21:32:21:479 AST] 6eecc29a SystemErr R at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
[03/11/04 21:32:21:479 AST] 6eecc29a SystemErr R at com.ibm.ws.webcontainer.servlet.StrictServletInstance.doService(StrictServletInstance.java:110)
[03/11/04 21:32:21:479 AST] 6eecc29a SystemErr R at com.ibm.ws.webcontainer.servlet.StrictLifecycleServlet._service(StrictLifecycleServlet.java:174)
[03/11/04 21:32:21:479 AST] 6eecc29a SystemErr R at com.ibm.ws.webcontainer.servlet.IdleServletState.service(StrictLifecycleServlet.java:313)
[03/11/04 21:32:21:479 AST] 6eecc29a SystemErr R at com.ibm.ws.webcontainer.servlet.StrictLifecycleServlet.service(StrictLifecycleServlet.java:116)
[03/11/04 21:32:21:479 AST] 6eecc29a SystemErr R at com.ibm.ws.webcontainer.servlet.ServletInstance.service(ServletInstance.java:283)
[03/11/04 21:32:21:479 AST] 6eecc29a SystemErr R at com.ibm.ws.webcontainer.servlet.ValidServletReferenceState.dispatch(ValidServletReferenceState.java:42)
[03/11/04 21:32:21:479 AST] 6eecc29a SystemErr R at com.ibm.ws.webcontainer.servlet.ServletInstanceReference.dispatch(ServletInstanceReference.java:40)
[03/11/04 21:32:21:479 AST] 6eecc29a SystemErr R at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.handleWebAppDispatch(WebAppRequestDispatcher.java:948)
[03/11/04 21:32:21:479 AST] 6eecc29a SystemErr R at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.dispatch(WebAppRequestDispatcher.java:530)
[03/11/04 21:32:21:479 AST] 6eecc29a SystemErr R at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.forward(WebAppRequestDispatcher.java:176)
[03/11/04 21:32:21:479 AST] 6eecc29a SystemErr R at com.ibm.ws.webcontainer.srt.WebAppInvoker.doForward(WebAppInvoker.java:79)
[03/11/04 21:32:21:495 AST] 6eecc29a SystemErr R at com.ibm.ws.webcontainer.srt.WebAppInvoker.handleInvocationHook(WebAppInvoker.java:201)
[03/11/04 21:32:21:495 AST] 6eecc29a SystemErr R at com.ibm.ws.webcontainer.cache.invocation.CachedInvocation.handleInvocation(CachedInvocation.java:71)
[03/11/04 21:32:21:495 AST] 6eecc29a SystemErr R at com.ibm.ws.webcontainer.srp.ServletRequestProcessor.dispatchByURI(ServletRequestProcessor.java:182)
[03/11/04 21:32:21:495 AST] 6eecc29a SystemErr R at com.ibm.ws.webcontainer.oselistener.OSEListenerDispatcher.service(OSEListener.java:334)
[03/11/04 21:32:21:495 AST] 6eecc29a SystemErr R at com.ibm.ws.webcontainer.http.HttpConnection.handleRequest(HttpConnection.java:56)
[03/11/04 21:32:21:495 AST] 6eecc29a SystemErr R at com.ibm.ws.http.HttpConnection.readAndHandleRequest(HttpConnection.java:610)
[03/11/04 21:32:21:495 AST] 6eecc29a SystemErr R at com.ibm.ws.http.HttpConnection.run(HttpConnection.java:431)
[03/11/04 21:32:21:495 AST] 6eecc29a SystemErr R at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:593)
[03/11/04 21:32:21:495 AST] 6eecc29a SystemOut O The Original Ecxception is
[03/11/04 21:32:21:495 AST] 6eecc29a SystemErr R com.ibm.ws.webcontainer.webapp.Weme too get the same error..
pls help..
my struts-config file is as follows
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE struts-config PUBLIC "-//Apache Software Foundation//DTD Struts Configuration 1.1//EN" "http://jakarta.apache.org/struts/dtds/struts-config_1_1.dtd">
<struts-config>
<data-sources />
<form-beans>
<form-bean name="UserLoginActionForm" type="usl.actionform.UserLoginActionForm" />
</form-beans>
<global-exceptions />
<global-forwards>
<forward name="error" path="/usljsp/Error.jsp" ></forward>
<forward name="failure" path="/usljsp/Error.jsp" ></forward>
</global-forwards>
<action-mappings>
<action path="/TCCL" type="usl.action.UserLoginAction" name="UserLoginActionForm" scope="request" parameter="login">
<forward name="success" path="/usljsp/login.jsp" />
</action>
<!-- Delux Menu Login -->
<action path="/Login" type="usl.action.UserLoginAction" name="UserLoginActionForm" scope="request" parameter="loginchk">
<forward name="success" path="/usljsp/Success.jsp" />
<forward name="failure" path="/usljsp/login.jsp" />
</action>
</action-mappings>
</struts-config>
thanks in advance -
Need the answers for following questions?
can anybody say the answers for following questions?
Data Dictionary :
1) Diff between Append Structure and Include Structure ?
2) What is Table Type ?
3) How the table entries are going to store, Is it Case sensitive, or in Capital Letter or in Small letter or as we give ?
4) How many indexes we can give for a table ?
Reports :
1) How can we enable the verticle scroll in a table control that comes in 2 nd screen of ME 21 T.code ?
2) What is BSEG table ?
3) How can you create Table Control ?
4) Diff between At Selection Screen on Field & At selection Screen Output ?
5) What are things we need to take care before using the Read Statement ?Example of Read Statement with Index ?
6) How many ways are there to select a Particular Data from the table ?
7) I want fetch the 10 th row and 5 th column from the list, How will you do it ?
BDC :
1) If we write Transaction Statement 2 times for a application What happens ?
2) If for Example , I had to upload 10 items for one header. The 5 items are uploaded, but the Sixth record is not uploaded ? How can you upload that data from 6 th Record ?
3) Tell me the Detail Steps in uploading the Data from Application Server ?
4) One Scenario, i am having 10 records in a file & when i am uploading the data everytime the 1st record is overlapping with already existing data, How you are going to handle this ?
5) What is meant by MASK in Upload function ?
6) what are the parameters you will pass withine BDC_INSERT ?
SAP- Script :
1) I want to display quantity & Price based on Particular Language and Country in SAP Script , How we can do that ? One particular statement is there for that, What is that ?
2) The Logo Upaloaded got Inverted , then How you are going to handle this situation ?
3) The logo uploaded using RSTXLDMC programe, Where it is going to store ?
4) can we see Tiff files in SE 78 T.code ? What are the file extension of Logo we can upload to SAP
5) How to check the changes made in the standard layout set , other than using Utilities--- -> Print preveiw ?
User Exit :
1) Suppose i have used a fuction Module Exit, But is in Inactive status , What is The error it is going to give during runtime ?
2) Suppose i want to delete the Function Module exit from one project and i want to use it for another project ? what are steps you follow to delete it ?
BADI
1) Is that all the Predefined BADI's present in SAP are reusable ?Data Dictionary :
1) Diff between Append Structure and Include Structure ?
Append Structure - This structure can be used only one time to append. Append structures are useful for standard tables.
Include Structure - This structure can be used in multiple tables. Include structures are useful for our own custom tables.
2) What is Table Type ?
A table type is a type that describes the structure and functions of an internal table in the ABAP program. In simple words table table will act as an internal table without header line.
3) How the table entries are going to store, Is it Case sensitive, or in Capital Letter or in Small letter or as we give ?
Yes it is case sensitive.
Use translate statement to convert Upper case or Lower case.
4) How many indexes we can give for a table ?
1 primary index automatically created and we can create up to 15 secondary indexes.
Reports :
1) How can we enable the verticle scroll in a table control that comes in 2 nd screen of ME 21 T.code ?
set <tablecontrol>-lines = 0.this code you have to put in one suitable userexit.then it applies to standard tcode ME21N.
2) What is BSEG table ?
BSEG table is a FI table for Accounting Document details.
3) How can you create Table Control ?
controls : tabcont type tableview using screen '3000'.
PROCESS AFTER INPUT
MODULE mod AT EXIT-COMMAND.
LOOP AT itab_table or LOOP "depending on whether we are using AT int_table
MODULE modify_int_table.
ENDLOOP.
MODULE user_command.
4) Diff between At Selection Screen on Field & At selection Screen Output ?
AT-SELECTION SCREEN ON FIELD
is to validate a particular selection screen field.
if any error comes it will open only this field and other fields will be disabled.
AT-SELECTION SCREEN OUTPUT
is used to do dynamic screen modifications on the screen.
5) What are things we need to take care before using the Read Statement ?Example of Read Statement with Index ?
do sort before read data from table.
6) How many ways are there to select a Particular Data from the table ?
using views or directly u can select data.
7) I want fetch the 10 th row and 5 th column from the list, How will you do it ?
sorry...
BDC :
1) If we write Transaction Statement 2 times for a application What happens ?
i think u got message like already that transaction was called like this..
2) If for Example , I had to upload 10 items for one header. The 5 items are uploaded, but the Sixth record is not uploaded ? How can you upload that data from 6 th Record ?
within the loop u have to write the code for the 6th record and then process again.
3) Tell me the Detail Steps in uploading the Data from Application Server ?
use DATASETS for uploading data from application server.
4) One Scenario, i am having 10 records in a file & when i am uploading the data everytime the 1st record is overlapping with already existing data, How you are going to handle this ?
write CLEAR statement before endloop.
5) What is meant by MASK in Upload function ?
sorry...
6) what are the parameters you will pass withine BDC_INSERT ?
TCODE-import parameter
DYNPROTAB-tables parameter
SAP- Script :
1) I want to display quantity & Price based on Particular Language and Country in SAP Script , How we can do that ?
One particular statement is there for that, What is that ?
Actually u will get quantity and price based on language using SE63 transaction.it is used for language conversion.
2) The Logo Upaloaded got Inverted , then How you are going to handle this situation ?
just check the printer settings again.
3) The logo uploaded using RSTXLDMC programe, Where it is going to store ?
STXBITMAPS is the table which stores all the logos.
4) can we see Tiff files in SE 78 T.code ? What are the file extension of Logo we can upload to SAP
No we cannot upload .tiff files using SE78 ..here u can upload only bmp and jpg logos...if u want to upload .tiff files go to standard program RSTXLDMC..by using this you can do.
5) How to check the changes made in the standard layout set , other than using Utilities--- -> Print preveiw ?
by executing the formprogram.
User Exit :
1) Suppose i have used a fuction Module Exit, But is in Inactive status , What is The error it is going to give during runtime ?
u didn't get any error message but that functionality cannot applied to it..thats it.
2) Suppose i want to delete the Function Module exit from one project and i want to use it for another project ? what are steps you follow to delete it ?
first go to that perticular project..within this u have one enhancement..just click on that one...and go to that function module which u are assigned..remove the code and activate..delete enhancement and activate that project..now u can use that enhancement in other projects.
BADI
1) Is that all the Predefined BADI's present in SAP are reusable ?
here reusable means u can do multiple implementations for all BADI's.
Rewards if it helpful.
Dara. -
Answer for the Interview Questions
Hello Experts,
Below is the list of questions from DP and SNP which I took it from APO Interview Questions thread. Please provide us the answers for the questions. It will be really helpful for the beginners like me. If every one in the forum contributes then it will be very great.
Thanks for your reply.
Best Regards,
Raj.
Where do you define Info-objects?
Info-objects comprise of?
What is Administrator Workbench is used to create and manage?
What are the different types of data in liveCache?
what is the difference between Storage Bucket Profile and Planning Bucket Profile?
How can you setup two grids in the Planning Book / Data View?
What can be sources of data in the timeseries keyfigure?
What is the use of ex-post forecast in Univariate Statistical Forecasting?
What are the types of Keyfigure aggregation in terms of characteristics/Calc Type?
What are the types of Keyfigure aggregation in terms of time?
Where do you maintain keyfigure aggregation?
What are aggregates?
What is the difference between planning characteristic and navigational attribute?
What are selection profiles used for?
What are the different ways of creating CVCs?
How many levels does a macro have?
What are the different types of standard macros?
When is the exit and default macro executed?
What is process chain and how is it used in Demand Planning?
what is an Infospoke? Where do you find the configuration in BW Admin Workbench?
what is the basis of creation of planning books and data views considering background job performance?
Where do you set the level at which a DP background job activity has to execute?
How can you setup custom alert types for DP and SNP?
what is the difference between Dynamic and Database alerts?
Where are database alerts stored (table name)?
What is realignment and explain the process?
What is cannibalization group?
What are the different forecast error measures and which is most preferred?
What are the different types of keyfigures you can use in a Planning Book?
What is planning version and planning area initialisation?
What is the master data in APO Demand Planning?
what is meant by Release of Demand Plan to SNP?
How do you create proportional factors? What is the standard keyfigure for Proportional Factor?
1. What is the difference between order series and time series data. How does different types of transaction data get mapped to Interactive Planning keyfigures?
2. What are the different methods of doing Supply Network Planning namely Heuristic, Optimiser, Multi-Level Demand Supply Match (CTM)?
3. What are aggregates and how are they used in SNP.
4. What is SNP Stock Transfer Horizon? What is the relation with Planning Time Fence?
5. What is SNP Horizon? What is the relation with PPDS Horizon?
6. What is the key difference in planning with SNP vs PPDS?
7. What is the master data required for planning in SNP?
8. How are SNP Plans different from PPDs Plans.
9. How can capacity constraints considered in SNP.
10. What are Quota Arrangements and how are they used?
11. How do you get forecast in SNP? What is forecast consumption?
12. How does the different transaction data aggregate and show up in different keyfigures in Interactive SNP?
13. What are the different types of SNP Heuristics possible?
14. What are the different Safety Stock calculation methods that can be sued in SNP?
15. What is Netting and Forecast Consumption? Explain Backward and Forward Consumption?
16. Are requirements and receipts in SNP pegged? How is it different from PPDS?
17. What is the relationship between SNP Horizon and PPDS Horizon?
18. Briefly describe the different ways of managing safety stock in SNP
19. What is the difference between a model and a version
20. In what scenario Capable-to-Match is applicable.
21. Briefly explain how SNP optimiser can be setup and used.Dear Raj,
you can go through the following questions and answers which will help you.
How can a planning version be frozen and unfrozen?
A Planning Version can be frozen and unfrozen using Function Module /SAPAPO/TS_PAREA_VERSIO_FREEZE so that no further changes to the planning version can be done.
What is Release Profile?
Release Profile is used to release timeseries data from DP to SNP/PPDS. You need to define the DP Planning Area and timeseries keyfigure the data in which is released and the SNP Category Type (typically FA) to which data is released. You may maintain a Daily Buckets Profile it will define the number of working days (working days determined based on Shipping Calendar maintained for the location master) starting on and from the From Date if released online/ interactively or that many workdays of the planning horizon when release is carried out in background. The Period Split (blank, 1 and 2) field in the SNP2 tab of location-product master determines how demand plan is released to SNP from DP (how bucketed data is disaggregated to the workdays).
What is the usage of Period Factor?
Period Factor maintained in the SNP PPM or Transportation Lane determines the Availability Date of a Receipt element within a time bucket (period). The system determines the exact availability date/time of the receipt elements within a period, by adding a time interval (that it gets by multiplying the period factor with the period length) to the start time of the period. You can enter a factor between 0 and 1, where 0 is the start of the period, 0.5 the middle, and 1 the end of the period. When calculating the availability date/time, the system takes into consideration all weekdays, meaning that it does not take into consideration any days that have been defined as non-workdays in the calendars.
Period Factor used is .71 = 7x0.71 = 4.97 or 5 days from ptimizer of weekly bucket resulting in a Friday.
If Period Factor is not maintained in PPM or Transportation Lane then the User Period Factor indicator and the Period Factor value maintained in the Lot Size tab of the location-product combination is used. If this is not maintained a default value of 0.5 is used.
What determines stock categories displayed in Stock on Hand keyfigure?
The categories defined in Category Group ST1 (can be maintained in table /SAPAPO/APOCGC) determine the stock categories that are displayed in the Initial bucket in the Stock on Hand keyfigure. Subsequent buckets are dynamically computed.
Does dynamic alerts show up in Alert Monitor?
Dynamic Alerts do not show up in the stand-alone alert monitor. Network alerts are to show pegging relationships.
What is the report to execute MASSD?
The report for executing MassD in background job is MASSBACK.
What is the shortcut to change location type in APO?
Report /SAPAPO/CHECK_LOCATION_TYPE can be used to change location type (say from 1001 to 1002 or vice-versa) of existing locations in APO. The table to refer is /SAPAPO/LOCMAP. SAP does not recommend this process.
How can a transaction be executed even when no authorization?
SE93 - Transaction code for Transaction Code E.g. CRC1 Create Resource has txn code CRAH. So if you do not have authorization to create resource you can use SE93 and enter txn CRAH and then Test F8 button to go to the txn.
How to copy a Process Chain?
To copy a process chain to another process chain, goto the Process Chain you want to copy and then type copy in the tool tar and hit enter. It will allow you to copy the Process Chain to another Process Chain that can be modified as per user's requirement, saved, activated and used.
What is the process to copy planning versions in R/3?
Use OLIX to first delete previous MRP planning versions. Then use MCB& to create the new MRP planning versions by choosing the appropriate version you want to create as ICO Version. The info structure in this case is S094.
How to use create planning book with two tables?
To use two tables on one screen of Planning Book/Data View - select indicator next to second page title and give name. Additional tab page is displayed in Planning Book Maintenance wizard to define the keyfigures for the second table.
What is Master Data in DP?
Master Data in Demand Planning primarily is Charcateristic Value Combinations commonly termed CVCs. CVCs are the planning combinations against which data is stored in keyfigures.
What is the behaviour of Procurement Type X?
Procurement Type X - source selection is based on matching due date then priority then cost. If both In-house Production and External Procuremnet is possible then In-house Production (PPM) is chosen as source of supply.
What is PPDS Fixing Horizon?
PP/DS fixing Horizon defines the PP/DS time Fence - within that period if heuristic is run no orders get changed.
What is the reuse mode in Product Heuristic?
Reuse mode in Product Heuristic - makes the system to reuse orders already present in the heuristic run i.e. orders are not deleted and recreated.
What is Planning Procedure?
Planning Procedure in Product Master (PP/DS) defines that when you convert a planned order to process order it is in Deallocated state and not Scheduled state and more.
<u><i><b>Award me if helpful</b></i></u>
Regards
Srikanth -
Using FILTER function in oracle answers
Gurus,
I have a question related to using Filter function in oracle answers.
When trying to insert a Filter (expr) Using (expr) clause in the formula area of a fact table field, It errored out with msg saying about using a wrong measure.
I know this can be done with a case expression but I tried filter clause since this is available in oracle answers.
Please help me figuring out this scenario.
Thanks.David / Raghu - Thanks for u'r replies and apologizes for not posting question with proper material.
Am posting my code and the error message from the screen.
Code :
IFNULL(FILTER("Fact - MBS Loan Transactions"."OUTSTANDING PRINCIPAL" USING "Dim - MBS Loan"."LOAN TYPE HPD/HDC/BNK" = 'HDC'),0)
Error :
nQSError: 10058] A general error has occurred. [nQSError: 22032] Function FILTER requires at least one measure attribute in its first argument. (HY000)
SQL Issued: SELECT "Dim - MBS Loan"."LOAN AMOUNT", "Dim - MBS Loan"."LOAN TYPE HPD/HDC/BNK", "Dim - MBS Loan"."LOAN TYPE SEN/SUB", "Dim - MBS Project"."PROJECT NAME", "Dim - MBS Project"."PROJECT NUMBER", "Fact - MBS Loan Transactions"."AR BALANCE INTEREST", "Fact - MBS Loan Transactions"."GL BALANCE INTEREST", IFNULL(FILTER("Fact - MBS Loan Transactions"."OUTSTANDING PRINCIPAL" USING "Dim - MBS Loan"."LOAN TYPE HPD/HDC/BNK" = 'HDC'),0) FROM "Financials - MBS"
OK (Ignore Error)
Please continue answering my queries. Since am a newbie your answers won't be just a reply but it's actually learning for me.
Thanks. -
Time series functions are not working for fragmented logical table sources?
If i remove that fragmented logical table sources, then its working fine.
if any body know the reason, please let me know.
thanks and regards,
krishnaHi,
is because the time series function are not supported for the framentation content, see the content of the oracle support:
The error occurs due to the fact the fragmented data sources are used on some Time series measures. Time series measures (i.e. AGO) are not supported on fragmented data sources.
Confirmation is documented in the following guide - Creating and Administering the Business Model and Mapping Layer in an Oracle BI Repository > Process of Creating and Administering Dimensions
Ago or ToDate functionality is not supported on fragmented logical table sources. For more information, refer to “About Time Series Conversion Functions” on page 197.
Regards,
Gianluca -
[svn] 2312: CursorManager: New functionality and a fix for SDK-15029
Revision: 2312
Author: [email protected]
Date: 2008-06-30 17:24:01 -0700 (Mon, 30 Jun 2008)
Log Message:
CursorManager: New functionality and a fix for SDK-15029
* NEW: When the mouse leaves a window/stage where a cursor is set, the cursor no longer sits on the edge of the screen until the mouse comes back into the window, it disappears.
* NEW: In AIR, when the mouse leaves an active window and glides over an inactive window (without giving it focus) where a cursor is set, the system pointer will be hidden and the custom cursor will appear while gliding over that window, and disappear when you leave that window.
* FIX: When a cursor is set in a child Window, and the mouse moves over another Window or WindowedApplication, the cursor no longer disappears -- the correct system pointer or custom cursor will display.
* Fixed listener leaks when switching systemManagers (neither Jason nor I can tell when/why it would happen in CursorManager, however).
Reviewer: Jason
Bugs: SDK-15029
Doc: No
QA: Yes, here's an exhaustive list of ideas:
* We'll need tests for the new behaviors.
* For all tests, we need to try behavior in air AND behavior in (sa)player, and test regressions.
* Please test SDK-15583 again, all other cursor tests.
* Take the test case for SDK-15029 and open up TWO MyWindows. Test how the cursors change across all three app windows when they are overlapped like a Venn diagram, with different combinations of custom cursors on and off -- we should have test cases for all of this behavior.
* Test that custom cursors work properly when the mouse leaves a non-rectangular stage with transparency.
* Test mouse drag situations -- drag off stage, release, move back to stage; drag off and back onto stage, etc.
* In my tests, I found a lot of bad behavior in AIR, and player seemed to be fine. Do we have drag and drop use cases for AIR with custom cursors?
A list of some bugs I encountered:
* BUG (cosmetic): If the mouse is outside the stage when a cursor changes for the first time (say you toggle a checkbox which sets the cursor using the keyboard), the cursor will appear on the stage in the last known mouse position. When the mouse returns to the stage, everything will start working correctly again.
* BUG (cosmetic): In AIR, if you drag out, and back into the window, then release, a MOUSE_OUT is fired again over the stage, which is wrong. The mouse coords given are (-1,-1), also wrong. This causes the system cursor to show instead of the custom cursor.
* BUG: In AIR: if you drag off the edge of a Window with a custom cursor, the cursor will vanish. The MOUSE_OUT event correctly event fires while dragging off the window. Even though the handler tells the system mouse cursor to appear, it doesn't -- might be an AIR issue, since the mouse is still dragging when told to show. If you move back over the active window without dragging, the cursor goes back to normal.
* BUG: In AIR: if you drag over another window with a cursor, MOUSE_MOVE events don't fire on that other window until you let go. Therefore, a custom cursor in that window does not get drawn, nor does a system cursor. If you move back over the active window without dragging, the cursor goes back to normal.
* BUG: In AIR: When dragging, off a window, Event.MOUSE_LEAVE only fires after the mouse is let go (unlike MOUSE_OUT), EVEN IF the mouse is dragged back over the window and released over the window. So you're told the mouse left when it didn't.
* BUG: In Player: I could never get Event.MOUSE_LEAVE to fire when added to the stage in saplayer or browser.
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-15029
http://bugs.adobe.com/jira/browse/SDK-15029
http://bugs.adobe.com/jira/browse/SDK-15583
http://bugs.adobe.com/jira/browse/SDK-15029
Modified Paths:
flex/sdk/branches/3.0.x/frameworks/projects/framework/src/mx/managers/CursorManagerImpl.a s -
Hello,
I had a server crash recently and our outsource hosting tech support suggested applying Cumulative Upade 12 for SQL server 2008R2 SP2 to fix the issue. The exception from our dump file "Warning: Unable to Verify TimeStamp for Path\ProgramName"
is not in the list of hotfixes for this CU. Do you know if this will fix this issue? The CU warns not to apply the CU if your issue id not addressed by the CU. Here is a portion of the dump file with the relevant error:
This dump file has an exception of interest stored in it.
The stored exception information can be accessed via .ecxr.
(7e8.2ab4): Unknown exception - code 000042ac (first/second chance not available)
ntdll!NtWaitForSingleObject+0xa:
00000000`777412fa c3 ret
0:240> .sympath srv*c:\Websymbols*http://msdl.microsoft.com/download/symbols;
Symbol search path is: srv*c:\Websymbols*http://msdl.microsoft.com/download/symbols
Expanded Symbol search path is: srv*c:\websymbols*http://msdl.microsoft.com/download/symbols
0:240> .reload /f
.Unable to load image C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Binn\sqlservr.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for sqlservr.exe
..........Unable to load image C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Binn\sqlos.dll, Win32 error 0n2
*** WARNING: Unable to verify timestamp for sqlos.dll
...............Unable to load image C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Binn\opends60.dll, Win32 error 0n2
*** WARNING: Unable to verify timestamp for opends60.dll
.......Unable to load image C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Binn\BatchParser.dll, Win32 error 0n2
*** WARNING: Unable to verify timestamp for BatchParser.dll
....Unable to load image C:\Program Files\Microsoft SQL Server\100\Shared\instapi10.dll, Win32 error 0n2
*** WARNING: Unable to verify timestamp for instapi10.dll
*** ERROR: Module load completed but symbols could not be loaded for instapi10.dll
..Unable to load image C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Binn\Resources\1033\sqlevn70.rll, Win32 error 0n2
*** WARNING: Unable to verify timestamp for sqlevn70.rll
*** ERROR: Module load completed but symbols could not be loaded for sqlevn70.rll
Press ctrl-c (cdb, kd, ntsd) or ctrl-break (windbg) to abort symbol loads that take too long.
Run !sym noisy before .reload to track down problems loading symbols.
.................Unable to load image C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Binn\ftimport.dll, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ftimport.dll
.Unable to load image C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Binn\msfte.dll, Win32 error 0n2
*** WARNING: Unable to verify timestamp for msfte.dll
*** ERROR: Module load completed but symbols could not be loaded for msfte.dll
...........Unable to load image C:\Windows\System32\sqlncli10.dll, Win32 error 0n2
*** WARNING: Unable to verify timestamp for sqlncli10.dll
...Unable to load image C:\Windows\System32\1033\SQLNCLIR10.RLL, Win32 error 0n2
*** WARNING: Unable to verify timestamp for SQLNCLIR10.RLL
*** ERROR: Module load completed but symbols could not be loaded for SQLNCLIR10.RLL
..Unable to load image C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Binn\xpsqlbot.dll, Win32 error 0n2
*** WARNING: Unable to verify timestamp for xpsqlbot.dll
.Unable to load image C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Binn\XPStar.DLL, Win32 error 0n2
*** WARNING: Unable to verify timestamp for XPStar.DLL
.Unable to load image C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Binn\sqlscm.dll, Win32 error 0n2
*** WARNING: Unable to verify timestamp for sqlscm.dll
...*** ERROR: Module load completed but symbols could not be loaded for odbcint.dll
...Unable to load image C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Binn\Resources\1033\XPStar.RLL, Win32 error 0n2
*** WARNING: Unable to verify timestamp for XPStar.RLL
Thank you,
Steve -The error message appears to be related to a debug session and not come from the actual crash.
So all I know is that you hade a server crash. I don't even know exactly what that means. Did Windows bite the dust? Or was it only SQL Server?
Assuming the latter, I would expect the SQL Server errorlog to have some information (and that would be ERRORLOG.1 or earlier, since the server have been restarted), but if SQL Server died the output may be incomplete.
There may be also dump files, but as I rarely look into these, I am not sure how to interpret them. But I am quite confident that "Unable to verify TimeStamp..." is not the reason SQL Server went down.
I would suggest the following course:
* If the server is not critical, do nothing. As long as it has onlyl happened once, it has only happened once.
* If the server is critical, open a case with Microsoft if you are not able to figure out the reason yourself. The key here is "Unknown exception - code 000042ac".
* If it happens again, you should absolutely open a case. An important thing here is whether the stack dump is identical or something different. If the stack dumps are identical, you may have hit a bug in SQL Server or the OS, and applying CUs or OS
fixes could help if it is a known issue. If the stack dump is something else, you have ghosts in the machine - that is, bad hardware.
Erland Sommarskog, SQL Server MVP, [email protected] -
my screen turns white and my functions lag on me for instence i try going to my ipod and it turns on but then turns right off going back to main screen. when i click on my settings it takes forever to open up, if opening at all.
Restore the phone --> http://support.apple.com/kb/HT1808
If this does not resolve the problem you have a hardware problem. -
Which Function Module is used for converting the DATE in BDC
HI,
Which Function Module is used for converting the DATE Format in BDC for Uploading purpose please help me.data : date like sy-datum.
data : odate(10) type c.
date = sy-datum. " in format YYYYMMDD
CALL FUNCTION 'CONVERSION_EXIT_PDATE_OUTPUT'
EXPORTING
input = date
IMPORTING
OUTPUT = odate .
write:/ odate. "in ur format '.
1.
In ur itab make a field for date as 10 characters and use this Fm to store the date .
2. Pass the date as the charcter field to the screen and now check .
Maybe you are looking for
-
I can't edit overset text in InDesign CS4
I have spent the last several hours trying to fix the overset text. Every time I click on the little red overset text in the lower right hand corner, another text box pops up. I have deleted it at least 150 times. I just cannot get it to work. I
-
while calling java class in cfobject,getting request time out error.How to increase request time for cfobject(only page level),i used cfsetting to increase but the things are not working.I am using coldfusin mx 6.1.Any help should appriciated
-
LiveCycle ES4 Database Initialization
Hello,,, I am in the process of installing LiveCycle ES4 on an Oracle Linux box with version 6.4. I am using Weblogic version 11g (10.3.6).. All the weblogic domains and machines are setup and running fine when I start them manually or through instal
-
Help I have 'lost' my downloads icon from the dock on my desktop Mac. Can I retrieve it? If so please describe how, using simple terms. I have tried searching folders, finder and trash
-
[TV@Master] Distorted sound despite clean install of XPPro
Hi, an old problem popped up, reinstalled my MEGA651 installed the latest drivers for my 8086 card and MSIPVS. just like when the early betas were out i had distorted sound, but that was corrected with a later beta, now i have it with the official ve