[NAND ] _FindFlashMediaAndKeepout :601 physical nand block offset 1

Hi!
I Need help! Can anyone help me?
My phone crashd very hard on the floor... everything at the Display was destroed..
I've changed the Display an now Shows me an error... I dont understand what this means!
Can anybody read this error and tell me, which part or what else is terminated or any Flex?
Screen is new, touch works... but when i restore my phone, Shows me this error...
thanks and sry 4 bad english
My Error:
[NAND ] _FindFlashMediaAndKeepout :601 physical nand block offset 1
[NAND ] start :356 this 0xa18e0400 PROVIDER=0xa04f5e80 flashMedia=0xa04f5e80
[NAND ] WMR_Start : 149 Apple PPN NAND Driver , Read/Write
[NAND ] WMR_Start : 174 FIL_Init [OK]
[NAND ] WMR_Open : 371 VFL_Open [OK]
[NAND ] s_cxt_boot : 88 sftl : error , unclean shutdown; adopted 3494 spans
[NAND ] WMR_Open : 420 FTL_Open [OK]
[NAND ] _publishServices : 642 FTL capabilities : 0x00000001
[NAND ] _ppnvflGetStruct : 3469 Checking borrowed blocks - count : 25 max_count : 25
[NAND ] _fetchBorrowedList : 881 number of borrowed blocks 18

It's always risky opening an iPhone, which is why Apple considers it serious enough so they won't fix a phone that has been opened. This error means that the SSD memory control has detected a failure. It could be a flex not inserted fully, but it could also have been a static discharge when the case was opened because whoever did the repair did not do it on a copper ground plane and/or was not properly grounded him or her self. It's really pretty much impossible to diagnose a hardware fault without proper test equipment. If the front camera problem occurred before the phone was opened it is unlikely to be related to this newest problem. You can check for water damage by removing the SIM card and looking in the empty SIM slot with a bright light. If you don't see any red dots then water probably did not get into the phone, so that would be one less concern.
What happens if you do a reset (hold the HOME and SLEEP buttons at the same time until an Apple logo appears)?

Similar Messages

  • I too face the dreaded [NAND ] _FindFlashMediaAndKeepout :601 physical nand block offset 1 [NAND ] start :356 this 0x9f538400 PROVIDER=0x9f6b1f00 flashMedia=0x9f6b1f00 [NAND ] WMR_Start : 149 Apple PPN NAND Driver , Read/Write [NAND ] WMR_Start : 174

    I've seen a few other people who have also had this issue, and their problem turned out to be some kind of camera flex thing, or a main logic board. I have an iPhone 5C iOs 8. I get that weird error message when trying to turn my phone on, after it randomly turned off this morning. Recently, I did have the screen replaced (for the second time) by a THIRD Party. Yes I know, I've voided the warranties, blah, blah blah, please don't crucify me. Now, the phone will bring up the apple logo on a black screen, but it does nothing. I'be tried to restart etc, and may have accidentally wiped out my phone by putting it in recovery mode. But oh well. Also worth noting is that my front camera hasn't worked in a few months, but I did nothing about it. Could the front camera problem be related to this? I also dropped my phone in the sink last night, but it was in its life proof, dried immediately and kept working fine. I have had nothing but problems with this phone, and if anyone has any advice, PLEASE HELP. Thanks.

    I don't believe any of us here can do anything to help you other than to suggest that you take the device back to the third-party that did the repair and have them do the repair correctly.

  • My iPhone 5 fell into the water and writing like this showed up with the apple sign.[NAND]_FindFlashMediaAndKeepout :601 physical nand block offset 1 [NAND] start :356 this 0x96fec400 PROVIDER=0x96193b80 flashMedia=0x96193b80 [NAND] WMR_Start : 149 Apple

    my iPhone 5 fell into the water and a writing like that appeared with the apple sign. (when its turning on) but it is now a gray screen and it is not working, nor can i connect it to my laptop.

    You're seriously trying to use an electronic device that's been in contact with water????
    You do know that since th beginning of time water and electricity don't mix, right?
    Start being smart and top trying to use it NOW, and put it in a bag of rice for a week.

  • [NAD] _FindFlashMediaAndKeepout :601 pysical nad block offset 1

    I was using my phone when it shutted down and when I booted up again on the bootup screen i've found this:
    [NAND ] _FindFlashMediaAndKeepout :601 physical nand block offset 1
    [NAND ] start :356 this 0x88164400 PROVIDER=0x86c32d80 flashMedia=0x86c32d80
    [NAND ] WMR_Start : 149 Apple PPN NAND Driver , Read/Write
    [NAND ] WMR_Start : 174 FIL_Init  [OK]
    [NAND ] WMR_Open : 371 VFL_Open   [OK]
    [NAND ] s_cxt_boot : 88 sftl : error , unclean shutdown; adopted 482 spans
    [NAND ] WMR_Open : 420 FTL_Open   [OK]
    [NAND ] _publishServices : 642 FTL capabilities : 0x00000001
    [NAND ] _ppnvflGetStruct : 3469 Checking borrowed blocks - count : 23 max_count : 23
    [NAND ] _fetchBorrowedList : 881 number of borrowed blocks 16
    What happend?!
    Help me!!!!
    Thanks Leo

    This might be a hardware problem with your flash drive, you should get it checked by visiting an Apple Store or Authorized Apple Service Provider next to your place.
    iPhone - Contact Support - Apple Support
    Has the software on your device been modified in the past?

  • HT201412 Apple IPAD has crash with [NAND] _FindFlashMediaAndKeepout:429 physical nand block offset 16 error

    Today my IPad has crashed with this text at the top of the screen - it keeps rebooting bu won't go any further past this piece of text.
    The full error text shown is:
    [NAND] _FindFlashMediaAndKeepout:429 physical nand block offset 16
    [NAND] start:220 this 0x9c0b6c00 PROVIDER=0x9c0b5c00 flashmedia=0x9c0b5c00
    [NAND] WMR_Start:149 Apple PPN NAND Driver, Read/Write
    [NAND] WMR_Start:174 FIL_Init   [OK]
    And then gets no further.
    What is this, does this mean something has burnt out and how do I get the tablet repaired ? I live in the UK and the serial no. of the 16 GB IPad is:
    DN6HDMTNDFJ1
    I so need this tablet for my work and need to get it back up and going again.
    Many thanks,
    Jayne

    Have you tried resetting it? I.e. Hold down the sleep/wake button and the Home button simultaneously until you see the Apple logo appear, then release them and see if the iPad will startup okay.

  • Iphone 5 error message on the top saying, 601 physical nand block offset 1.

    iphone 5,on the screen, apple logo on and some error message on the top saying, 601 physical nand block offset 1. once i remove the cable from laptop to phone it goes on dfu mode and can't restore the phone because of some unknown error. please help.

    yeah i am on my way. lets hope they will fix.
    thanks.

  • Findflashmediaandkeepout 601 physical nand block offset 1

    A couple days ago, my phone got slightly wet. I soaked it in rice for a day then let it sit in a fairly warm room/area to air dry for most of the next day. The tird day, I looked over my phone and saw that it appeared to be completely dry so I allowed it to charge. When I plugged it up, I saw the usual Apple logo then 2 seconds later an error message popped up at the top of the screen. This is the main phrase: "findflashmediaandkeepout 601 physical nand block offset 1"
    Seconds later, the message would disappear, but the Apple logo would remain for a few moments, disappear, reappear, etc. The phone is unresponsive to the pressing of just one button (home or power), and shuts off for a maximum of 25 seconds when pressing the buttons in unison.
    I know I should take this to the Geniuses but I'm in desperate need of  answers now.. Can anybody help me fix my phone or even help me understand what this error code means?????

    Hi mmmaaaaany, 
    Welcome to the Apple Support Communities!
    If your iPhone is unresponsive after getting slightly wet, it may be necessary to have your iPhone evaluated for repair. If you choose to set up the repair, you can follow the links on the attached website to set it up.
    iPhone Other Repair Options - Apple Support
    Have a great day, 
    Joe

  • My phone was jettisoned into a hot tub.  Now I'm getting "_FindFlashMediaAndKeepout:600 physical nand block offset 1".  what do I do?

    My phone was jettisoned into a hot tub.  Now I'm getting "_FindFlashMediaAndKeepout:600 physical nand block offset 1".  What do I do?

    If you can turn it off, do so and put the device in a sealed bag of uncooked rice for 3-5 days. After that, you can try and charge it and see if it will work. If not, you will need to purchase an OOW (out of warranty) replacement. See this link for costs in your area. Go to the Warrant & Service pricing section after selecting your area.
    http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipho ne

  • My ipad3 will not turn on except to display the following[NAND] _FindFlashMediaAndKerpout:429 physical NAND block offset 16  [NAND] start:220 this 0xa015cc00 PROVIDER=0x9ed20080 flashMedia=0x9ed20080  [NAND] WMR_Start:149 Apple PPN NAND Driver, Read/Write

    Help. My ipad will not boot up except to show the following message.
    [NAND] _FindFlashMediaAndKerpout:429 physical NAND block offset 16
    [NAND] start:220 this 0xa015cc00 PROVIDER=0x9ed20080 flashMedia=0x9ed20080
    [NAND] WMR_Start:149 Apple PPN NAND Driver, Read/Write
    Ideas? Help

    Hi, my ipad 2 just got the same problem and after reading all relative post, finnally i figrue it out, that is no software issue at alll just hardware,
    I did attemp replace the power button cable on my ipad so i must disconnect the back camera cable so there is my problem. Because the connect some how not exact in place, i took the camera out and the issue is gone. So, in your case, if you did try to replace anything look at them again or you just take them out one by one and reboot ipad until it work.
    Hope this help
    Binh

  • What is 429 physical nand block offset 16

    this iPad in business had the following error message when turned on:
    NAND] _FindFlashMediaAndKeepout :429 physical nand block offset 16
    [NAND] start:220 this 0x97aedc00 PROVIDER=0x97b9c500 flashMedia=0x97b9c50
    [NAND] WMR_Start:149 Apple PPN NAND Driver, Read/Write
    [NAND] WMR_Start:174 FIL_Init [OK]
    It was erased and reset to default settings then after a month or so, the error came back. 

    Hi, my ipad 2 just got the same problem and after reading all relative post, finnally i figrue it out, that is no software issue at alll just hardware,
    I did attemp replace the power button cable on my ipad so i must disconnect the back camera cable so there is my problem. Because the connect some how not exact in place, i took the camera out and the issue is gone. So, in your case, if you did try to replace anything look at them again or you just take them out one by one and reboot ipad until it work.
    Hope this help
    Binh

  • [NAND] _FindFlashMediaAndKeepout Error

    Suddenly the Ipad started restarting and showing the apple logo and the following massage on the screan
    [NAND] _FindFlashMediaAndKeepout :429 physical nand block offset 16
    [NAND] start:220 this xxxxxxxx PROVIDER=xxxxxx flashMedia=xxxxxxx
    [NAND] WMR_Start :149 Apple PPN NAND Druverm Read/Write
    [NAND] WMR_Start :174 FIL_Init    [OK]
    xxxxx changes every restart.
    It has never happened before. In Fact I never had issues with the Ipad. this is Ipad 2 and It has been with me since 2011.
    I looked online people are saying that this is a manufacter defect and something internally caused it that can't be done by users.
    so what should I do ?!!!!!
    Alex

    I just finished doing that and now I am getting the 1603 error.
    I looked it up and it says
    Follow the steps listed above for Error 1604. Also, discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations. If you do not want to remove the IPSW in the original user, try restoring in a new administrator user. If the issue remains, Eliminate third-party security software conflicts.
    the thing is I do not have any security software on this PC to begin with I am uninstalling iTunes and renstalling it again before trying one more time.
    I disabled windows firewall and run itunes diagnostics and I got the following report.
    Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
    Alienware M11xR3
    iTunes 11.0.5.5
    QuickTime not available
    FairPlay 2.4.14
    Apple Application Support 2.3.4
    iPod Updater Library 10.0d2
    CD Driver 2.2.3.0
    CD Driver DLL 2.1.3.1
    Apple Mobile Device 6.1.0.13
    Apple Mobile Device Driver 1.64.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.6.502
    Gracenote MusicID 1.9.6.115
    Gracenote Submit 1.9.6.143
    Gracenote DSP 1.9.6.45
    iTunes Serial Number 001ABB5803584EC0
    Current user is not an administrator.
    The current local date and time is 2013-09-13 22:18:21.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is supported.
    Core Media is supported.
    Video Display Information
    NVIDIA, NVIDIA GeForce GT 540M
    Intel Corporation, Intel(R) HD Graphics 3000
    **** External Plug-ins Information ****
    No external plug-ins installed.
    **** Network Connectivity Tests ****
    Network Adapter Information
    Adapter Name:          {F2B1BDA6-C11E-48D2-B9DC-0A0D7C5D9ADB}
    Description:          TeamViewer VPN Adapter
    IP Address:          0.0.0.0
    Subnet Mask:          0.0.0.0
    Default Gateway:          0.0.0.0
    DHCP Enabled:          Yes
    DHCP Server:
    Lease Obtained:          Wed Dec 31 19:00:00 1969
    Lease Expires:          Wed Dec 31 19:00:00 1969
    DNS Servers:
    Adapter Name:          {37C6783A-6A97-4E92-8766-EB90423CAF3E}
    Description:          Microsoft Virtual WiFi Miniport Adapter #2
    IP Address:          0.0.0.0
    Subnet Mask:          0.0.0.0
    Default Gateway:          0.0.0.0
    DHCP Enabled:          No
    DHCP Server:
    Lease Obtained:          Wed Dec 31 19:00:00 1969
    Lease Expires:          Wed Dec 31 19:00:00 1969
    DNS Servers:
    Adapter Name:          {8830652F-9B25-4B0B-A13B-BDC574840162}
    Description:          Microsoft Virtual WiFi Miniport Adapter
    IP Address:          0.0.0.0
    Subnet Mask:          0.0.0.0
    Default Gateway:          0.0.0.0
    DHCP Enabled:          Yes
    DHCP Server:
    Lease Obtained:          Wed Dec 31 19:00:00 1969
    Lease Expires:          Wed Dec 31 19:00:00 1969
    DNS Servers:
    Adapter Name:          {16B40D33-84CF-455A-B7C1-CF885A28B32B}
    Description:          Bluetooth Device (Personal Area Network)
    IP Address:          0.0.0.0
    Subnet Mask:          0.0.0.0
    Default Gateway:          0.0.0.0
    DHCP Enabled:          Yes
    DHCP Server:
    Lease Obtained:          Wed Dec 31 19:00:00 1969
    Lease Expires:          Wed Dec 31 19:00:00 1969
    DNS Servers:
    Adapter Name:          {0945565E-10D8-4D25-98A5-FC78E8D41415}
    Description:          Intel(R) WiFi Link 1000 BGN
    IP Address:          10.0.0.6
    Subnet Mask:          255.255.255.0
    Default Gateway:          10.0.0.1
    DHCP Enabled:          Yes
    DHCP Server:          10.0.0.1
    Lease Obtained:          Fri Sep 13 16:16:34 2013
    Lease Expires:          Fri Sep 20 16:16:34 2013
    DNS Servers:          75.75.75.75
                        75.75.76.76
    Adapter Name:          {9F715096-0103-45A1-9406-928054D26EC8}
    Description:          Atheros AR8151 PCI-E Gigabit Ethernet Controller (NDIS 6.20)
    IP Address:          0.0.0.0
    Subnet Mask:          0.0.0.0
    Default Gateway:          0.0.0.0
    DHCP Enabled:          Yes
    DHCP Server:
    Lease Obtained:          Wed Dec 31 19:00:00 1969
    Lease Expires:          Wed Dec 31 19:00:00 1969
    DNS Servers:
    Active Connection:          LAN Connection
    Connected:          Yes
    Online:                    Yes
    Using Modem:          No
    Using LAN:          Yes
    Using Proxy:          No
    Firewall Information
    Windows Firewall is off.
    Connection attempt to Apple web site was successful.
    Connection attempt to browsing iTunes Store was successful.
    Connection attempt to purchasing from iTunes Store was successful.
    Connection attempt to iPhone activation server was successful.
    Connection attempt to firmware update server was successful.
    Connection attempt to Gracenote server was successful.
    iTunes has never successfully accessed the iTunes Store.
    **** Device Connectivity Tests ****
    iPodService 11.0.5.5 (x64) is currently running.
    iTunesHelper 11.0.5.5 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    Universal Serial Bus Controllers:
    Renesas Electronics USB 3.0 Host Controller.  Device is working properly.
    Intel(R) 6 Series/C200 Series Chipset Family USB Enhanced Host Controller - 1C26.  Device is working properly.
    FireWire (IEEE 1394) Host Controllers:
    JMicron OHCI Compliant IEEE 1394 Host Controller
    Most Recent Devices Not Currently Connected:
    iPad running firmware version 5.1.1
    Serial Number:          GB024EWRETU
    **** Device Sync Tests ****
    No iPod, iPhone, or iPad found.
    Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
    Alienware M11xR3
    iTunes 11.0.5.5
    QuickTime not available
    FairPlay 2.4.14
    Apple Application Support 2.3.4
    iPod Updater Library 10.0d2
    CD Driver 2.2.3.0
    CD Driver DLL 2.1.3.1
    Apple Mobile Device 6.1.0.13
    Apple Mobile Device Driver 1.64.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.6.502
    Gracenote MusicID 1.9.6.115
    Gracenote Submit 1.9.6.143
    Gracenote DSP 1.9.6.45
    iTunes Serial Number 001ABB5803584EC0
    Current user is not an administrator.
    The current local date and time is 2013-09-13 22:18:21.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is supported.
    Core Media is supported.
    Video Display Information
    NVIDIA, NVIDIA GeForce GT 540M
    Intel Corporation, Intel(R) HD Graphics 3000
    **** External Plug-ins Information ****
    No external plug-ins installed.
    **** Network Connectivity Tests ****
    Network Adapter Information
    Adapter Name:          {F2B1BDA6-C11E-48D2-B9DC-0A0D7C5D9ADB}
    Description:          TeamViewer VPN Adapter
    IP Address:          0.0.0.0
    Subnet Mask:          0.0.0.0
    Default Gateway:          0.0.0.0
    DHCP Enabled:          Yes
    DHCP Server:
    Lease Obtained:          Wed Dec 31 19:00:00 1969
    Lease Expires:          Wed Dec 31 19:00:00 1969
    DNS Servers:
    Adapter Name:          {37C6783A-6A97-4E92-8766-EB90423CAF3E}
    Description:          Microsoft Virtual WiFi Miniport Adapter #2
    IP Address:          0.0.0.0
    Subnet Mask:          0.0.0.0
    Default Gateway:          0.0.0.0
    DHCP Enabled:          No
    DHCP Server:
    Lease Obtained:          Wed Dec 31 19:00:00 1969
    Lease Expires:          Wed Dec 31 19:00:00 1969
    DNS Servers:
    Adapter Name:          {8830652F-9B25-4B0B-A13B-BDC574840162}
    Description:          Microsoft Virtual WiFi Miniport Adapter
    IP Address:          0.0.0.0
    Subnet Mask:          0.0.0.0
    Default Gateway:          0.0.0.0
    DHCP Enabled:          Yes
    DHCP Server:
    Lease Obtained:          Wed Dec 31 19:00:00 1969
    Lease Expires:          Wed Dec 31 19:00:00 1969
    DNS Servers:
    Adapter Name:          {16B40D33-84CF-455A-B7C1-CF885A28B32B}
    Description:          Bluetooth Device (Personal Area Network)
    IP Address:          0.0.0.0
    Subnet Mask:          0.0.0.0
    Default Gateway:          0.0.0.0
    DHCP Enabled:          Yes
    DHCP Server:
    Lease Obtained:          Wed Dec 31 19:00:00 1969
    Lease Expires:          Wed Dec 31 19:00:00 1969
    DNS Servers:
    Adapter Name:          {0945565E-10D8-4D25-98A5-FC78E8D41415}
    Description:          Intel(R) WiFi Link 1000 BGN
    IP Address:          10.0.0.6
    Subnet Mask:          255.255.255.0
    Default Gateway:          10.0.0.1
    DHCP Enabled:          Yes
    DHCP Server:          10.0.0.1
    Lease Obtained:          Fri Sep 13 16:16:34 2013
    Lease Expires:          Fri Sep 20 16:16:34 2013
    DNS Servers:          75.75.75.75
                        75.75.76.76
    Adapter Name:          {9F715096-0103-45A1-9406-928054D26EC8}
    Description:          Atheros AR8151 PCI-E Gigabit Ethernet Controller (NDIS 6.20)
    IP Address:          0.0.0.0
    Subnet Mask:          0.0.0.0
    Default Gateway:          0.0.0.0
    DHCP Enabled:          Yes
    DHCP Server:
    Lease Obtained:          Wed Dec 31 19:00:00 1969
    Lease Expires:          Wed Dec 31 19:00:00 1969
    DNS Servers:
    Active Connection:          LAN Connection
    Connected:          Yes
    Online:                    Yes
    Using Modem:          No
    Using LAN:          Yes
    Using Proxy:          No
    Firewall Information
    Windows Firewall is off.
    Connection attempt to Apple web site was successful.
    Connection attempt to browsing iTunes Store was successful.
    Connection attempt to purchasing from iTunes Store was successful.
    Connection attempt to iPhone activation server was successful.
    Connection attempt to firmware update server was successful.
    Connection attempt to Gracenote server was successful.
    iTunes has never successfully accessed the iTunes Store.
    **** Device Connectivity Tests ****
    iPodService 11.0.5.5 (x64) is currently running.
    iTunesHelper 11.0.5.5 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    Universal Serial Bus Controllers:
    Renesas Electronics USB 3.0 Host Controller.  Device is working properly.
    Intel(R) 6 Series/C200 Series Chipset Family USB Enhanced Host Controller - 1C26.  Device is working properly.
    FireWire (IEEE 1394) Host Controllers:
    JMicron OHCI Compliant IEEE 1394 Host Controller
    Most Recent Devices Not Currently Connected:
    iPad running firmware version 5.1.1
    Serial Number:          GB024EWRETU
    **** Device Sync Tests ****
    No iPod, iPhone, or iPad found.

  • Ipad 3 wi-fi - nand flash media is keepout : 688 physical nand Block..

    Hi,
    i Need help how to fix it?
    Need your guides how to fix it, my ipad warranty is expired. according to apple repair this item cannot repair need to replace 1 to 1. since the warranty expired than i need to up the money MYR 1,300.
    Please guide me what should i do?
    it's logical board? its flash problem, or something else please advice.
    please refer this links:http://www.ifixit.com/Answers/View/138480/The+Error+is+nand+flash+media+is+keepo ut+%3A+688+physical+nand+Block..

    I'm sorry but this item is 1 year and a few months old? damage to nand is not something you'd expect from normal wear and tear and therefore not caused by you. I'd contact Apple again. Be pushy, write emails, ring them. There are people who'd be able to replace this but finding them is the problem. good luck
    pollytintop, 1 hour ago
    Thanks pollytintop for your advice- I’m still keeping looking forward how to fix it. Will not this item (ipad) throw become rubbish due to damaged that do not know cause and cannot repair or fix it? Hope somebody highlighted this issue to Apple (the best customer service ). Thanks

  • Updation of Physical Inventory Blocking Indicator

    Dear All,
    I would like to know how the Physical Inventory Blocking Indicator is updated in the material master recored storage location stock Tab....
    Is there any setting in customizing for this as its not getting updated when I create a Physical Inventory document... ?

    the indiactor is not getting updated at all, If I do it manually by table maintainance the posting block works fine....
    but need a programme name thru which this field is updated. Can anyone tell me where  which programme MARD-SPERR field is being used.
    I dont have access to any standard system where this indicator is updated automatically
    Thanks in advance---

  • Physical inventory block in material master

    Hi
    In Material Master, Plant/Storage location stock view, there is  a field "physical inventory block".
    I want ot remove the block to one of the materials.
    How to edit the field. In change mode (MM02), the whole view is in diplay mode only.
    any suggestions please
    regards
    prasad

    Hi,
    It seems there is on PID (Physical inventory document)document active for that material.
    To remove block indicater for material Goto transaction MI22 there you can find whcich PID document active for material.
    Then take the PID document complete the physical inventory process else you can delete PID document through MI02 transaction.
    PID steps:
    MI01 create PID document
    MI04  Enter inventory Count
    MI11 enter recount.
    MI07 Post  Inventory differencess.
    Hope this would help,
    Regards,
    JS

  • Flash media and keepout 600 physical nand black offset 1

    My screen is frozen and this is the message at the top of the screen. Help~please!

    Any physical or liquid damage to the iPhone?
    First try a reset:
    - hold the home button and sleep/wake button down at the same time
    - the iPhonw qill turn off(keep holding) then as soon as you see the Apple logo appear release both buttons
    If the issue remains then try plugging it into a PC/Mac with iTunes and see if it will be recognised. If it is recognised then back it up and then restore to factory settings. If all steps fail then [book an appointment at an Apple Store to have the iPhone evaluated.
    All the best

Maybe you are looking for