Nano 3 problems with OX v.1039

this is a combination question--i have a Mac G5 OS X v.10.3.9--i am able to use my ipod (gen5) with it no problem--however, having just purchased a new nano 3--itunes will NOT support it--saying-- that it needs OS X v.10.4 or higher. my questions are a) do i need to upgrade to the latest (Leopard) software--note--this Mac does NOT have an intel chip, so what upgrade do i use. b) if i do upgrade my Mac, will i lose the ability to talk to my gen5 ipod? thank you

Welcome To  Discussions moeron81!
No. You must use this one Mac OS X v10.4.6 (DVD) Retail Box.
Additional info in these links.
Using OS X Install CDs/DVDs On Multiple Macs
What's A Computer Specific Mac OS X Release
Software Update, Upgrade: What's The Difference?
ali b

Similar Messages

  • Unknown device - ipod nano fine - problem with windows xp and usb root hub

    Greetings all. I've seen this question come up over and over again and have been working on it following previous posts and posts on microsoft and hp sites for a couple of days now.
    First off - the ipod nano is fine. Works on my son's computer well.
    When I plug it into my 6 months new HP Pavilion laptop it says: 'found new hardware' and goes through the process of installing it, says it's been installed, but then shows 'unknown device'. In Device Manager it tells me there are no drivers installed, but when I try to follow the other instructions on this forum to update the drive to USB mass storage device (usbstor.inf), it tells me the best driver is installed and won't do it.
    Many seem to have this problem with devices other than the iPod on Windows service pack 2 so I went to the Microsoft forums and they seem just as puzzled. I've updated all my Windows & HP software to the latest possible versions. The problem is definitely in the USB. Once, when I uninstalled the USB device and then rebooted the computer with my iPod still plugged into the port, it found my iPod, correctly identified it, and for a blissful moment I thought everything was fine! Then it reinstalled the USB drivers and made a comment to the effect that I should move the iPod to a USB 2.0 port for more effective operation and the iPod disappeared again.
    I have 3 USB ports on my laptop, all are USB 2.0 and all 3 have the same problem.
    I've tried all the stuff people have already said on here...does anyone have any NEW ideas? I'm hesitant to take it in for service because it seems to be a software problem that should be fixable.
    Thanks in advance for your help and sorry about the long post.

    This isn't a solution, but it's something I just tried and it may provide someone additional clues about's going on. I too think this is some sort of USB problem.
    I have 6 USB ports. Two of them are USB 2.0. Since I applied the 03-23 update my computer hasn't recognized my nano at all. I would connect my nano and I couldn't get it to show up in My Computer, in iTunes, or on the far right side of the Start taskbar.
    I just tried plugging my nano into the first USB port of my USB 2.0 pair and left the second 2.0 port empty. I then rebooted with the nano attached. Viola - I get a "Found New Hardware Apple iPod USB Device" message. My nano is now flashing "Do Not Disconnect." A small removeable storage icon with green arrow now shows on the far right side of the Start taskbar. If I click on it (like you're going to eject it) the note displayed says "Safely remove USB Mass Storage Device - Drive (F:)".
    If I go into My Computer, "Removeable Disk (F:)" now shows there. However, if I try to follow Trevor's instructions in another post to "go into My Computer with iPod connected, right click it, wait till the right click menu comes up (could take a few minutes); click Format, . . ." I'm stuck. I do the right click, watch the hour glass and wait for the Format menu to come up but it never does. Eventually the hour glass just goes away. No message, no Format menu. The waiting hour glass just goes away.
    My computer isn't as new as yours, but like you I am completely current on maintenance.
    I'm going to keep trying . . . If anyone has any ideas, please let me know.
    Dell Dimension 8100 Pentium 4   Windows XP   Service Pack 2 Phoenix ROM Bios PLUS Version 1.10 A09

  • IPod Nano Syncing Problems With iTunes 10

    I have an iPod Nano 4G with 1.0.4 installed on it. It works just fine but I downloaded this video from the iTunes store ( http://itunes.apple.com/WebObjects/MZStore.woa/wa/viewTVSeason?i=396250905&id=39 5373961&s=143441 ) and it will not let me add that video to my ipod. It does not give me an error, it thinks that it is on there, but the video is not on the ipod when i try to use it.

    I started over today.
    I tried again to sync my iPod to iTunes.
    the ipod got onto itunes and i had the message telling me there experiencing probleme with my ipod and i had to restore it.
    http://img6.imageshack.us/img6/9117/image6am.png
    i click on restore
    the ipod shoes "do not disconnect"
    the ipod is supposed to be updated and appear after that on itunes again.
    it never appears and there is a white screen display on my ipod
    and after that the loop on itunes starts, it shows 2 messages
    1.
    http://img257.imageshack.us/img257/9920/image8e.png
    I click on continue
    and then there is this
    2.
    http://img443.imageshack.us/img443/8784/image9mf.png
    and it goes back to 1. then 2. and so on and so forth until i click cancel on 1.
    I really don't understand what's going on here...
    Thanks for you help...
    if there is anyone who can help me on that...

  • IPod nano installation problems with Windows Vista

    I purchased an iPod nano today and have not been able to install iTunes. There are instructions for Windows XP but not much help for Vista. As of right now I am very unhappy with my purchase and if I can't get help soon I am going to return it. I have heard so many good things about iPods but I haven't had any good experiences yet. Please help!!
    HP E6400   Windows Vista  
    HP E6400   Windows Vista  

    I, too, just bought my first ipod and have Windows Vista. I purchased songs through iTunes and tried to drag them to my ipod icon, but it said that I was not authorized on this computer! I called tech support for HP and they said it's a compatibility issue and to contact Apple about it to fix it. Before I do so, I am checking here first, just hoping there would be a really easy fix for this problem. I'm regretting getting Windows Vista now for many reasons, this being the latest. Any advice?
    HP Pavilion Notebooj   Windows Vista   2 GB ipod Nano

  • IPod Nano 8gb problems with iTunes/iMac

    Bought a brand new iPod Nano 8gb last night. I am trying to use it on an iMac G4 1 gigahertz with OSX 10.4. This computer is not online. I downloaded itunes 7.0.1 from a neighbors computer and installed it on my imac and it seems to work fine. I can hook up the Nano to the iMac with no problem. Itunes recognizes the Nano and seems fine UNTIL I click anywhere in the itunes window woth the Nano plugged in, at which point itunes disappears from my screen. I can relaunch it, but the same thing happens again. Itunes works fine without the Nano plugged in, but not with the Nano.
    I called Apple Support, and was told I HAVE to be online to use both itunes and the new Nano I am online at work on a PC, but don't have internet access at home. I have no desire to download songs online, or do anything else online at home, I just want to be able to put my own existing CD's on my Nano to listen to away from home.
    Any ideas? Do I HAVE to be online to use iTunes 7 and the new Nano?

    I guess I'd better clarify this for my own sake. By "update" are you referring to changing music, folders, artists, etc? In which case, I realize that I would need to update my Nano to reflect any changes I make to my music files. If by "update" you are referring to making a software or firmware change through an internet connection, then I would think this would be a rare occurrence that could be done at a friends computer.
    The Apple "help" person on the phone said that I couldn't even USE my Nano without being online. Period. That the new Nano and new versions of iTunes REQUIRED an internet connection to function properly.
    At the Apple authorized dealer where I bought the Nano, they said there is no need at all to be online, as long as I have the proper versions of everything (OS, iTunes, etc) installed, it should work fine, there is no need for an internet connection. (Unless I want to actually download songs, of course) They have burned a CD for me with the required updates they feel I will need, which I will install later this evening. Hopefully that will work.
    It makes no sense to me that I would be REQUIRED to be connected to the internet in order for the Nano to simply be able to playback songs I have stored on my iMac, as I was told by the Apple help person the phone. He made NO effort to help at all, saying repeatedly that as long as I was not "online" with my iMac, the Nano and iTunes would not work, saying "What part of this don't you understand?"
    Then he hung up.

  • IPod Nano sound problem with bass

    Hello,
    I bought an iPod Nano 4Go few days ago. I used to have previously a Sony HBM30 that was very good in sound quality and especially with bass.
    With the iPod nano, I should say that the sound is not as good as the sony especially for bass (saturation). I encode with VBR 256kbps in MP3. The sound is very poor if I put on the equalizer and there's no way of changing bass or treeble.
    So here are few questions :
    1/ Is there any tips to improve bass quality in order to avoid saturation ?
    2/ Is there any headphone that are better that Ipod ones for bass ?
    3/ Is there any firmware in the future that could improve sound and bass ?
    4/ Does Apple knows this problem ?
    Thanks for you help.
    Best regards

    Welcome to Apple Discussions!
    Keep in mind the headphones you may be using. How are the songs in iTunes? The question is whether the songs are being sent to the iPod with good quality. If you are pleased with the songs in iTunes, then first look at the headphones you are using. Are you using the white ones that come with the iPod? Those are not the best headphones as far as sound quality goes.
    Just looking for a few basic answers to those questions before trying to troubleshoot the iPod, iTunes, or the songs.
    Merry Christmas
    btabz

  • IPod Nano(2nd) problems with Windows Vista

    I'm trying to sync music and podcasts to my Nano and I get an error message (-50) saying it wont sync. Then I get another error message saying that the disk could not be read from or written to. I have the newest version of iTunes and the newest version on my iPod. I can't even restore my iPod and I get error 1418.
    What can I do to fix this problem?

    I'm trying to sync music and podcasts to my Nano and
    I get an error message (-50) saying it wont sync.
    Then I get another error message saying that the
    disk could not be read from or written to. I have
    the newest version of iTunes and the newest version
    on my iPod. I can't even restore my iPod and I get
    error 1418.
    hat can I do to fix this problem?
    You can read this
    http://docs.info.apple.com/article.html?artnum=305042
    and then try
    http://www.apple.com/support/downloads/itunesrepairtoolforvista10.html

  • Problems with headphone jack -- anyone else?

    My wife's 4G Nano has problems with the headphone jack, and we are sending it back for repair. The unit played one channel through both earbuds, and on many songs the difference is not that noticeable, so we didn't even know it had a problem for a day or so. On other songs, the problem was obvious because you could barely hear the vocals. Also, maximum volume was much lower than it should have been. I have seen at least two other posts on this board indicating a similar problem. I suspect there may be others with the same problem who don't even realize it because on some songs the difference is very subtle. Mine would only play true stereo when you inserted the plug halfway into the jack and held it there. If you suspect you might have the same problem, try that. You might have to push "Play" again because removing the plug often stops playback.

    I had the same problem with a 16Gig that I ordered the day they were announced: one channel very weak but if you pull the plug half way out it seemed to function. It didn't really function though. By pulling it out you hit a point where both earphones are playing off the same channel. I looked in the headphone jack with a microscope and could see either contamination or removed gold from the contact in the nano to the channel on the tip of the plug.
    At first they wanted me to return it for repair but I refused since I didn't pay for a refurb or repaired unit and it had come to me defective. They ultimately replaced it for me and now it seems to work fine. It is not a real obvious problem, but looking here on the forum I'd say it is a not uncommon problem which indicates that their quality control needs improvement.

  • How can I sync my IPOD Nano 4 to iTunes on my PC? I've already tried the sync button on iTunes and it says it is synced. I've also tried the 5 steps recommended by Apple to fix sync problems with no luck.

    How can I sync my ipod nano 4 to iTunes on my PC? I've tried the sync botton on iTunes and the 5 steps recommended by Apple to correct sync problems with no luck.

    How is your iPod configured to sync content from your iTunes library? Any error messages during the sync process? 
    You may want to reset warnings on the device by right->clicking on it under Devices and choosing Reset Warnings.  Then resync the iPod to see if any alerts appear.
    Is this the same computer you normally sync the Nano with?
    B-rock

  • HT3310 i have a problem with the headset of my ipod nano 4th gen. the right side don't have a sound. It comes in and out.  what do I need to do?.. I am using the original headset eversince. I took it to an Apple Mac Center I was told they can't do anythin

      I have a problem with the headset of my ipod nano 4th gen. the right side don't have a sound. It comes in and out.  what do I need to do.. I am using the original headset eversince. I tool it to a Apple Mac Cennter and Taked with a Service Center Rep. And he told me that they can't do anything because they don't repair the ipod they didn;t even look at it. I was told instead to buy a new one. I was very disappointed.. This is already my 5th ipod though i am planning to buy a new one.. I still want it fixed so I can give it to my little sister

    From the OP: "My old computer got a virus and when that happened all my music was lost. "
    They don't have the music on their computer so they cannot transfer the iTunes folder, from the computer to their iPod and then to the new computer. And if they try to enable disk use on the iPod it will erase all the music that is on it. The method you cited is moving the files in a data format using the iPod as a flash drive. It doesn't work if they are in music format. That is why I suggested Yamipod.

  • I recently upgraded to iTunes 11.1.5 and now my iPod Nano is not recognized in iTunes. I also upgraded my iPhone 5s to iOS 7.1. i Tunes on my computer does recognize my iPhone. What is the problem with my iPod Nano not being recognized?

    I recently upgraded to iTunes 11.1.5 and now my iPod Nano is not recognized in iTunes. I also upgraded my iPhone 5s to iOS 7.1. i Tunes on my computer does recognize my iPhone. What is the problem with my iPod Nano not being recognized?

    I would think, Twins1995, that if we are having the problem, others are as well. Hopefully, Apple will shortly issue a follow-up software release to fix the problem. Or is that just wishful thinking on my part.
    It would be helpful, if there were some kind of work-around in the interim, so we can use our devices. Pretty frustrating when you consider that all of the hardware and software is produced by Apple.

  • Does the third generation iPod Nano have allot of problems with it?

    I was wondering if you think that there is an unusual ammount of defective iPod nanos, or iPod nanos with problems.
    I know that forums are mainly a support page, so I'm only going to see posts about PROBLEMS with the iPod, but i wanted some opinions.
    Should i wait to buy the new iPod nano, or should i go ahead and purchase?
    EDIT: Also, remember when steve annouced that the iPod Video could play songs with no song skip. I think it's called "continuous playback". Can the nano do that?
    And last of all, does the nano back scratch as easily as the 1st gen nanos?
    Thanks in advance,
    ZLH
    Message was edited by: ZLH

    I am on my third Nano3 - the store replaced it without hesitation. This one is (knock on wood) working very well. If you are close to an Apple Store, the risk is low. And they ARE cool!
    They indicated that they had not had many returns, so it might have been just a bit of bad luck (after all, it is the 13th iPod in my family, and my 7th...)
    I have not tested the gapless play.
    I do wish, they had stayed with the Aluminum finish on the back. I never used a cover on my Nano 2, and it looks great. This one has the marring typical of polished SS backs. You can polish it out, of course.

  • IPod Nano Problem with Turning On

    Right I've got a bit of a problem with turning on the nano. I know it works because when its on it's fine, but if its off for a while (i.e. 30 mins or more) and I go to press play or whatever, nothing happens. But if I press any of the buttons about 100 times it will come on and work fine.
    Has anyone had this problem and know if there's anything I can do about it. It seems like the buttons don't work properly, but it can't be that because they work when its on.
    Here's what I know it's not:
    Battery (its full)
    In need of a restore (tried that)
    Reset (tried that)
    In need of new software (just put the latest on)
    So any help would be greatly appreciated.
    Cheers.
    Oh also, completely off subject just trying to kill 2 birds with one stone, how do you do backwards deletes on a mac (i.e. what the 'del' button does on a PC)?

    AliasailA, you are kidding, right??
    You cannot use someone else's serial number or Apple Care Plan--it doesn't work that way.
    I noticed you had another post that said the mini was given to you and has a "sad face icon" and out of warranty. Hummmm.
    You really have to send that mini in for repair/replacement or consider it a lost cause. Maybe it is time to buy an iPod Nano for yourself.

  • Nano 2nd Generation, Problems with Songs ???

    Hello, I have transfered songs from my iTunes to my Nano and there is 2 songs that play for couple of seconds than just stops and goes to the next song. Weird thing is when i go to play the song directly from iTunes it plays normally. I have also downloaded the songs to my Ipod Video 30gb and the same exact songs play normal with no problems. ?????? I just dont understand whats wrong. I have even did the 5 R's and restored my Nano and still the same problems with just those 2 songs. I could just go without those 2 songs but, it just makes me curious to why it works in iTunes and on my Ipod Video 30gb, but not on the Nano. If you have had this problem before or know of a solution your help would be greatly appreciated. Thank You for taking the time to read this...
    Ipod Nano 2nd Generation   Other OS   Windows Vista

    I have this exact same problem, but after doing the 5 R's it is now cutting songs short that didn't have that problem before. Unlike Junz, I can't live with random songs being cut off. I am very interested in an answer as well.

  • Ipod nano not showing up in itunes and getting message about problem with this drive, ipod nano not showing up in itunes and getting message about problem with this drive

    My ipod nano has been working fine for at least three years.  All of a sudden I get two messages.  First, "there is a problem with this drive, scan and fix it".
    And, an Ipod has been detected but can't be identified properly.  It's a 6th generation nano and I have Windows 8.  Any thoughts?

    Hello, oakbay. 
    Thank you for visiting Apple Support Communities. 
    Here is an article that I would recommend going through when experiencing this issue. 
    iPod nano: Error message saying that iPod 'could not be identified properly'
    http://support.apple.com/kb/ts3218
    Cheers,
    Jason H. 

Maybe you are looking for

  • Workflow WS00400012 Release for Payment not getting triggred

    Hi, As mentioned in the help docs we have done the following settings for Release for payment, yet the Workflow is not getting triggered. SPRO->Financial Accounting (New)->Accounts Receivable and Accounts Payable->Business Transactions->Release for P

  • Data Source Catalog SRM

    Dear All, Iu2019m using Catalog in SRM 5.5. I need to realize a query BI 7.0 to MD Catalog, but I donu2019t find any data source standard from SRM system. Has anyone experienced similar problems? I donu2019t find any SAP note on the subject. Thank yo

  • Read images from a jar file?

    Hello, I'm converting a 6i app to 10g. This app does a ton of read_image_file() calls to change GIF images on the screen based on user actions. In 6i the images are all stored on the local hard drive. The images are not icons for buttons, but images

  • Multipe EDI Transactions mapped to single B2B Monitoring Directory

    Hi We have a typical requirement situation in our company. We are doing EDI transactions with one of our Trading partner. We are exchanging different EDI documents. But, because of some limitations we are using Oracle B2B to exchange only one transac

  • Image don't  diplay in SRM-MDM catalog UI

    Hi, I am  using  SRM-MDM3.0 , MDM 7.1 SP04  adn  Web UI SP07. In data manager,  the record is normal  with image.    and  in UI configure, the image field is added  display list. but when open the catalog,   the image field value  is bank. Please tel