Nano (3rd gen/8MB/1.1.3 version) Capacity question

Am trying to clear my Ipod to free up as much space as possible. I currenly have nothing on my Ipod except a few songs which take up 88.9MB of "Audio" space. However, it is still showing that I have 641.MB of "Other" taking up space on my Ipod. How much room does the 1.1.3 firmware take up anyway? What else could be taking up all this "Other" space? Thanks.

Hello jla5762,
The Other space on your iPod includes Artwork, Notes, Lyrics, Games, as well as your iPod's software. So basically, there is always going to be a dedicated amount of space for this category. Usually if this value in GB's in size, it is probably indication that your iPod is corrupt and needs to be restored via iTunes.
Hope this helps.
Brock

Similar Messages

  • My ipod nano 3rd gen gets error code -9459 when I try to convert a video in Itunes

    I'm tring to convert video from Youtube to play on my ipod nano 3rd gen.  When i go to itunes and Advanced and set it to convert for ipod it goes on for quite a while then about 3/4 way done I get error message Erroe occurred converting file "teapot 1". An unknown error (-9459)
    What do I do?  I tried Real player converter too - no luck.

    I'm not sure about the error message, but it might just be easier to use an application such as Handbrake or MPEG Streamclip to create an iPod compatible version of the video.
    B-rock

  • Ipod nano 3rd Gen not recognized by itunes or windows 7

    USB device not recognized.  
    things I have done
    put Ipod in disk mode still didn't recognized
    My Ipod Classic 6th Gen works fine
    It shows 3 Mass Storage Device
    when I plug in Ipod nano 3rd gen it shows unknow device
    have deleted Mass storage devices and Apple Moble Devices
    unpluged computer from wall
    nothing solving problem
    I also tried it on my laptop its not being recognized
    my wife Ipod nano is doing the same thing as mine
    its got to be the software download from itunes because it has worked on all previous versions.

    I have the same problem. My Iphone 4s works fine when docked to PC. PC won't recognize my 3rd Gen Nano. Same goes for my Work PC. They don't recognize it nor will plugging it in to a PC charge it. I have to plug it into wall socket to charge.
    I have tried resetting, I have tried downloading newest Itunes.
    Must be the Nano itself if it doesn't get recognized by mutliple PCs?
    I haven't used the Nano for probably 2 months. Previously it worked fine...
    One thing, when docked to my laptop during a reboot/startup, it intially starts to charge the Nano, but once setup is finished it doesn't recognize it any longer...

  • Will my computer read my new ipod nano 3rd gen?

    i just bought a new ipod nano 3rd gen from circuit city before i opened it i looked on the back and saw system requirments it says nothing about being compatible with windows xp media center edition and i have windows XP media center edition 2002 sp2. will the ipod nano 3rd gen work with my computer?

    Yes it will work fine. iTunes just needs XP and doesn't really care what sort of crazy version that came with whatever computer you bought. It is still just XP maybe configured or a little more specifically.
    Patrick
    p.s. This is a Tablet laptop I assume?

  • Nano 3rd gen and itunes 8.0.1

    My ipod nano 3rd gen will not sync with itunes now that we have downloaded the latest version 8.0.1. Itunes locks up immediately upon recognizing my ipod and closes upon clearing the error message (systems error upon opening itunes). Originally I was unable to open Itunes all together, but after going through the support programs and following the instructions of removing one of the SDDb files, Itunes was at least opening. Unfortunately I am unable to do anything with my nano when it is connected to the computer or when I try and connect it after opening Itunes. Itunes open if there my nano is not connected to it.
    I am completely at a lose. Please offer some advice.
    cheers,

    So, to bring closure - and possibly help someone else with the same question - I'll answer my own question.
    The new 3rd Gen Nano arrived today. I just decided to install iTunes on the new computer and connect the new Nano to that computer. I was prompted to name the Nano and I was able to log into my existing iTunes account and purchase music. I was not able to transfer those purchases to the Nano - got an authorization error. I needed to authorize the new computer and then I was all set.
    It turned out there was already a 2nd authorized computer on the account (my laptop which I had forgotten about). I was surprised that when I connected the new Nano to that laptop, it was recognized without question - and without affecting the old Nano that had been previously docked to the laptop.
    My only problem was downloading a podcast that I subscribe to (Leo Laporte's The Tech Guy). I tried downloading the last 4 or 5 podcasts on the new computer - but, kept getting a network timeout error. I tried on the laptop and got the same errors. I knew that these had been previously downloaded to the old desktop. So, I updated that to the latest version of iTunes and was able to get those podcasts onto my new Nano.
    So, the bottom line is this turned out to be a no-brainer. Was worried for nothing.

  • Why can I not sync my iPod Nano 3rd Gen to my iTunes 9.1.1?

    My daughter mistakenly downloaded the latest iTunes version which does not work with my older iPod Nano 3rd gen.  Before all this happened I was running version 9.1.1 which was working beautifully.  After uninstalling the updated version and reinstalling the 9.1.1 version, I cannot restore nor sync my music to the iPod Nano.  I would just be happy having things the way they were previously.  Any tips???  Thanks.

    Go to the Apple icon in the upper left corner and select 'About this Mac' - it will show you which version of OSX you are using.
    Read this KB from Apple - http://support.apple.com/kb/ph12113
    MJ

  • Ipod nano 3rd gen. video download question

    Hi All,
    I tried adding a movie video to my ipod nano (3rd gen) and it took up the space when I synced it but when I ejected and went to find it on my ipod it wasn't there. There was no video file to find but the space was indeed used. My husband has a Ipod classic and the same movie synced onto his ipod and my daughter has the ipod nano 4th gen and she was able to view movie also. Is the 3rd Gen nano not video compatible? Thanks in advance for your help in this matter.

    It's as compatible as the 4G version; I think you just had bad luck. If you can't find & delete the (large) file, you'll have restore and start over.

  • My iPod nano 3rd gen is stuck in a restore loop.

    My iPod nano 3rd gen is stuck in a restore loop.  I have wiped it with Disc Utility and attempted to restore with iTunes, but there was no effect. I checked it in diagnostic mode against an identical pod and found no significant differences in the results, both checked out fine.  I know that this is not a windows driver issue since I use a mac.  In any case such an issue should have been resolved when I wiped the pod.  I have not attempted to load any music on it or sync my library, so a corrupted file seems unlikely as well. there is no water damage and the case is in excellent condition.  I have no idea whats wrong with it so any help or suggestions would be appreciated.

    Hi clarity,
    Welcome to Apple Support Communities.
    You may want to first try removing and reinstalling the latest version of iTunes by following the steps in this article:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    http://support.apple.com/kb/HT1923
    If you continue to receive the error message when connecting your iPod, see this article for more troubleshooting tips:
    iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    http://support.apple.com/kb/TS1814
    Best,
    Jeremy

  • Ipod nano 3rd gen.  some albums have suddenly disappeared from ipod, but they are showing as ticked on itunes library, have bought more tracks since on itunes and they are showing, any help please

    ipod nano 3rd gen - tracks (whole albums) have disappeared from ipod but are showing ticked in itunes library and ipod is synched, have bought tracks from itunes since this happened and they are fine, any help please

    You may have transferred all your songs, but your iPad is seeing the library as a different entity.
    The following article(s) may help you.
    Moving your iTunes library to a new computer  

  • I plugged my ipod nano 6th gen in to the latest version of itunes today and as soon as i plugged it it it turned on automatically as it should when i came back to it 5 mins later, picked it up and it felt warm and it wouldnt turn on. what should i do?

    I plugged my ipod nano 6th gen in to the latest version of itunes today and as soon as i plugged it it it turned on automatically as it should when i came back to it 5 mins later, picked it up and it felt warm and it wouldnt turn on. what should i do?

    I have the same problem and can't seem to figure out what the problem is. I rebuilt my iTunes library and still my 6G nano crahes whenever I load an AAC tune onto it.  MP3s and podcasts all work fine, it's just the AACs... 
    Just *loading* an AAC song will cause the Nano 6G to reboot as soon as it disconnects from Itunes. It will then reboot a few times and then go into recovery mode. :-(
    Karen

  • IPOD NANO 3rd Gen problem Apple Mac set up PC BASED MAIN UNIT

    I have been asked by a friend to help out because they asked to add music to their new IPOD. But the owner is a tech scared person. They gave the unit an IPOD NANO 3rd Gen to my friend who uses Apple MAC they set up the IPOD with their Itunes and added the songs.
    Later they wanted new tracks but have now downloaded ITUNES to their own PC Windows Vista system. The tracks were added to a USB memory stick and transfered and added to the PC Vista ITUNES. But now the IPOD Nano will not register on the Windows Vista ITUNES system but will show up on the "My computer"
    I have reset the nano by holding the on/off and menu etc to get the Apple logo, the unit beeps as does the laptop PC Based ITUNES etc but will still not register on the ITUNES or allow me to sync the music from the ITUNES to the IPOD.
    Can anyone advise how I can reformat the IPOD or reset the IPOD and remove all music currently on it to start again but get it to register/set up and show on the ITUNES on the windows VISTA unit rather than the mac based system.
    Thanks,
    Global_mongrel

    Hey, I bought an iPod nano 3rd gen yesterday and I have exactly the same prolem you are describing in your message. Have you found any solution to this?

  • My PC Shuts Down When I Plug In My New IPod Nano 3rd Gen.

    The title of this post pretty much says it all. Got me my new iPod Nano 3rd gen. yesterday. Brought it home, booted up the puter, loaded iTunes and plugged that sucker in. Well first iTunes kindly instructed me that I would have to download it's newest software, which I did.
    Then soon afterwards when I thought i was set, I plugged in my new 3rd gen iPod Nano to the pc and as soon as I did that my pc shut down completely, and restarted. Shut down is putting it mildly, I mean it just went 'kablink" and then was restarting.
    I tried uninstalling iTunes, cleaning my temp folder, my internet cache, then reinstalling iTunes anew, still nada. All to no avail, people, because each and everytime I plug in my new iPod Nano, no sooner than i do this my pc summarily goes "kablink" on me and starts booting up again.
    NOW I STILL have my iPod Nano 2nd gen, and it works fine, even with the newest iTunes software, it doesn't screw up my pc like the new 3rd gen iPod Nano does.
    Now I am to conclude that the problem lies in the 3rd gen iPod itself. How could it not? My iPod Nano 2nd gen works absolutely fine, and everytime I plug in my new iPod Nano, I shut down in a flash withtout fail. Anyone of you have this error? I would love to know short of calling iTunes tech support about what to do about this, this is a MAJOR bummer for sure. Now I have to be concerened about whether or not I am ever going to get this thing to work now.
    Is the iPod broken? If not why the shutdowns then? Please advise. Many thanks in advance.

    Hey, I bought an iPod nano 3rd gen yesterday and I have exactly the same prolem you are describing in your message. Have you found any solution to this?

  • Ipod nano 3rd gen (click wheel)

    I currently have a ipod nano 3rd gen with a click wheel. I have uninstalled, reinstalled itunes and rebooted my computer already (I have windows XP). It shows up in "My Computer" as unknown but itunes will not reconize the ipod is connected, but does with my other ipod. I've tried changing the drive letter on this 3rd gen; but it wont appear to even change the drive letter. I believe I need to download the drivers (its what i had to do with my previous ipod) but I would like a clue where to download the drivers from, or someone to shed any light and a solution for this issue. My ulitmate goal is to get itunes to reconize it so that I can restore the ipod
    Thanks.

    Clickwheel games are no longer available in the iTunes store.  Sorry.
    B-rock

  • IPod nano 3rd gen. Apple logo remains on screen and iTunes doesn't recognise it's plugged in, I can't even turn it off. I've tried to get to disc menu but when I hold the 'menu and select button' it reboots it doesn't recognise the select and play button

    iPod nano 3rd gen. Apple logo remains on screen and iTunes doesn't recognise it's plugged in, I can't even turn it off. I've tried to get to disc menu but when I hold the 'menu and select button' it reboots and then doesn't recognise the select and play button to show the tick. I'm helpless.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                 
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Cannot find iPod nano 3rd gen in iTunes

    My iPod nano 3rd gen is recognized by Finder in mac OS but not shown in iTunes for sync

    Howdy Andrea.Betti,
    Thanks for using the Apple Support Communities.
    In order to resolve this issue where you're not seeing the iPod in iTunes, please follow the steps in the article below.
    If you don't see your connected device in iTunes for Mac - Apple Support
    Have a good one,
    Alex H.

Maybe you are looking for

  • I converted the movie, but no sound

    I converted the movie, but no sound the movie was converted from mpg. to m4v. any reason? btw, to convert 3 minutes of video takes like 30 minutes!

  • My iPad camera shutter will not open

    On my iPad i can not get the camera to work, the shutter will not open. There is plenty of memory and when i use photo booth the camera works on that. I have also carried out a software update but still not working. Any ideas??? Many thanks

  • Mac OS X Lion (v10.7) Thumb Drive

    Hello, On the page for purchasing the new Mac OS X Lion (v10.7) which this link leads to: http://store.apple.com/au/product/MD256Z/A?fnode=MTY1NDAzOA (Note: THIS LINK LEADS TO THE AUSTRALIAN STORE, HERE IS A LINK TO THE UNITED STATES STORE: http://st

  • Two structures on same axis in query designer

    Hi, I developed a query with two structures column axis in Bex query designer (in BI 7) when I open this query in report designer is showing this error " T<b>he Report Designer does not support this query drill down. Column axis may contain one struc

  • Can I STOP my powerbook from automatically waking up when I open my display

    Hey all, Have spent literally hours trying to find this, but I'm at a loss. Perhaps somebody knows. The latch on my powerbook 12" 867mhz PowerBook broke off. Now the display regularly opens a little bit, even though it's in a protective case. Does an