Nano 3rd will not unlock and is not visible in iTunes when connected to computer.
My 3rd Gen Nano is stuck in locked position with the screen lit. Additionally it does not show up on the computer or in iTunes when connected. I can't restart or repair myself. I suspect the locked switch may be broken. Any ideas?
First of all, try another port on your computer. Some ports are not connected direct to the motherboard and do not recognize the iPod as well as those that are.
Still no joy? See these.
iPod doesn't appear in iTunes or on the Mac desktop.
iPod does not appear in iPod Updater or iTunes in Mac OS X.
iPod appears on the Mac OS X desktop but not in iTunes.
Try it in disk mode.
Putting iPod into disk mode.
Similar Messages
-
I want to use my IPOD Classic 160gb for notepad entries in addition to the music and books I listen to. It is set to "Open ITunes when connected to computer" and "manually manage music and videos". How can I do that without losing some of the features of those two? I just want to add a feature. Thanks
Settings>Store (or iTunes & App Stores if you are running iOS6)>Apple ID. Tap your son's ID and sign out. Sign in with your ID and password.
You shouldn't lose the music, but if you try to update any apps that you bought with the family ID, you will have to use that password that is linked with that ID in order to update.
Avoid downloading past purchased content with the old ID if you can since you will associate the iPad with the old ID for 90 days and you will lock yourself out of your own, new ID for that period of time. Read more about associated devices in iTunes here.
iTunes Store: Associating a device or computer to your Apple ID -
Original ipod not showing up in itunes when connected to computer
My original ipod has worked fine until a few months ago. I connected it to my 10.4.7 Mac and it won't recognize that it's hooked to the computer. The ipod screen just says "OK to disconnect". I downloaded the new itunes but that didn't do anything, and I'll try the 5 R's, but any ideas if that doesn't work? It's not full, so I don't know what's wrong with it.
First of all, try another port on your computer. Some ports are not connected direct to the motherboard and do not recognize the iPod as well as those that are.
Still no joy? See these.
iPod doesn't appear in iTunes or on the Mac desktop.
iPod does not appear in iPod Updater or iTunes in Mac OS X.
iPod appears on the Mac OS X desktop but not in iTunes.
Try it in disk mode.
Putting iPod into disk mode. -
My Ipod has stopped working properly since the laptop shut down during synching.
My ipod is being slower and wont show any music. when I go into general settings it says the music and videos are loading..
It wont let me into settings all of the time either.
My applications and games have become slow or unresponsive.
The ipod keeps resetting itself, I have tried resetting it to no avail.
I tried plugging it into itunes but it freezes itunes and wont show up on my computer.
When I switch off the ipod it shows a spinning wheel until the battery dies, which could be nearly 2 hours!!
does anyone have any advice as to what to do?
currently ive reset it - nothing has happened
ive let the battery drain itself then recharged it to see if that would make a difference - no difference
Help ASAP neededTry restoring the iPod via iTunes. First from backup and if problem persists, restore to factory defaults/new iPod.
If still problem make an appointment at the Genius Bar of an Apple store. If your iPod is with in the one-year warrranty, not abused and defective Apple will replace it. -
My Touch will not show on my desktop or in itunes when connected!
I installed leopard onto my macbook a few weeks ago and updated my itunes about a week ago. Tonight was the first time I plugged my ipod into my computer. Nothing has happened. I've tried using different USB cords and I've restarted both my computer and ipod touch. I've been trying to do some research on how to fix my problem and all I am finding are people with the same problem but there aren't any answers. I saw one person say to force it in idisk. I don't have idisk. Does anyone know of anything that could help me get my touch on my desktop and computer? Please please help.
The iPod Touch does not show up as a Device in the Finder. Only as a Device in iTunes.
Does your version of iTunes support the iPod Touch? Is your Quicktime up to date?
MJ -
My Iphone was not unlocked and i accidentally upgarded my phone. Now it asks me to get insert a SIM without a PIN lock and would only let me make emergncey calls. How do i get phone working ?
You will need to establish an account with whoever the phone is locked with and restore it. Or you will not to unofficially unlock it again.
-
my ipad screen is black and will not reset and does not come back after restoring, the info is still on internal because i can see it on itunes in the apps catagory it's the display is not working, can see backlight but black...does anyone know how to fix, other than take it to apple.
thanks!The wish list only works on apps you have to pay for. To get it tap the icon of the app you want to save. After it opens at the upper right corner is a box with a arrow. Tap that then tap add to wish list list in the box that opens.
-
Ipod shuffle will not charge and is not recognized by itunes or computer
HELP, My G2 ipod shuffle will not charge and is not recognized at all by my computer or itunes. it is like there is nothing even pligged in to the usb port. and when i plug in my ipod to the charger my ipod blinks orange 4 times and then stops whats going on?
Is your phone itself working OK?
-
Just Upgraded my IPOD 5 to iOS 7.0.2 and it will not charge the battery anymore.
When I plug it in, it now gives the message "This cable or accessory is not certified and may not work reliably with this IPOD".
Anyone else have this issue after they upgraded the iOS system?
Thanks,- See:
iPod touch: Hardware troubleshooting
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
I just updated tosystem10.6.8. I am running Iphoto 08 version 7.1.5 Quick time movies will not open and play directly in Iphoto. When I move them to my desktop they play fine.Quick time 10.0 What do I need to do?
You need to download and install QuickTime Player 7 for Mac OS X v10.6.3 or later
OT -
Hello I would like to unlock my iphone 4s because it has not unlocked and I use it on other networks if there is such a possibility I greet
You need to contact the network provider to which the phone is locked. No-one else can do it for you.
-
My iPod shuffle ( 1st or 2nd generation) will not recharge and does not show when the doc is connected to my MacBook Pro. I'm running the latest updated version of iTunes.
Hello Jane Benstock,
Thank you for using Apple Support Communities
It sounds like the next best step to take would be to reset the iPod Shuffle.
Check out this article named Resetting iPod shuffle found here http://support.apple.com/kb/HT1655.
All the best,
Sterling -
WHen I put music onto my devices I will have some songs that will play, while others will be grey and can not be played....also I find that when I purchase an album from iTunes all songs from the album will not be downloaded...
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
If necessary
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
I have updated to Final Cut 10.1.1 but existing projects from previous version will not update and are not available. Have tried to re-install Final Cut as well as bring the projects to another computer which has the update, but they still will not update. Has anyone else encountered this problem and is there anyone who can assist?
In the Finder take a look at the path where your old projects and events are stored. They should be in Final Cut Projects and Final Cut Events folders respectively. Those folders need to be in Users/user/Movies on the boot drive and/or at the root level of other drives for FCPX to see them.
If that's indeed the case, then you should be able to get them updated ny using the Update Projects and Events command form the File menu and then clicking on Locate.
Russ -
My iPad screen went dark. it will not reset and is not discoverable on iTunes.
my iPad screen went dark. it will not reset and is not discoverable on iTunes?
Make sure it's plugged into power for at least 5 minutes, then try holding down the top power button and home button for 15-30 seconds. You may get it to reboot.
Maybe you are looking for
-
Error while posting FBS1 via BAPI
Hi Experts, getting below error while posting FBS1 via BAPI_ACC_DOCUMENT_POST TYPE ID NUMBER MESSAGE E |RW |609 Error in document: BKPF 10000022440GF3032010 TERCLNT303 E |RW |609 Error in
-
Starling lines with the 2LIS_02_SCL extractor.
Hi expert. I have got a problem with the schedule line purchasing extractor, 2LIS_02_SCL. I noted that the extractor extract many more lines that those present in a purchasing order. In particular, it extracts also deleted items and the corresponding
-
I turned off the daily update of web gallery and set it to manual. I did this because iPhoto was locking up for a long time each time I would open it. It was updating the ton of web galleries I've created. I thought I could then make changes as I wan
-
How to change header font style in Spark DataGrid?
I'm looking since last week for a way how to change the font style of the header in a Spark DataGrid. It drive me nuts that I can't find a way to do this. Have anyone one an idea how to achieve it? Any help is appreciated. Thanks, - Artur
-
Problem with special characters and xmldom.writetoclob
Hi! I have a problem with oracle parser in pl/sql. My situation: i have a clob with valid xml with for example decoded characters: (spaces between & and # are for good representing characters by browser - in really there is no spaces) <xml> <any><![C