Nano 6th Generation case and plastic cover recommendations

Hi all,
I was wondering if anyone has any recommendations for a Ipod nano (6th Gen) case and the plastic covers that go over the glass to protect from scratching. What brands are out there? All I have seen on Apple website is the watchlike band. I prefer a protective clear case and a protective sheet over the glass. Thanks a lot Apple members.
Macthemini

I am having huge problems synching my new Nano 6th Gen to my Mac while 2 other earlier Ipods work perfectly. My problem relates to the fact that I use smart playlists and their contents get all messed up on the new Ipod when I try synching. Symptoms include both missing songs on the Ipod and songs in artist name sequence instead of sequence on Itunes, both problems that raise questions about quality of software released for 6th gen. I went to talk to genius at Apple store and he indicated that Apple is moving away from smart playlists on Ipods and so suggested that I create dumb playlists on Itunes and copy the contents of my smart playlists to the dumb playlists and then synchronize those to the Ipod. That does work but it's a pain in the behind each time I add any songs to Itunes that get added to the smart playlists as I have to go through this whole time consuming process just to get the songs to show up on my Ipod. I also hope that Apple gets the synching problem fixed quickly.

Similar Messages

  • Nano 6th generation - flashing and flickering white screen loop

    I have an issue that does not seem to be exactly answered anywhere. 
    1.  The screen was bad and was not responsive when unplugged from the computer.   Black screen, no nothing.
    2.  When connected to the computer it would show up in iTunes, however the screen would go to a white screen for 3 seconds then go out, then you would get about a minute of very faint flickers then back to a white screen for 3 seconds.  This would continue indefinately (Let it go for 2 hours). 
    3.  Even though it was like this I was able to upgrade the iOS and register it and so on.
    4.  Figuring it was the screen I purchased a new one and replaced it.  While replacing it I was able to see the screen and flip through it and so on.  At this point it was working although the battery had almost zero power.
    5.  Finished reassembly, plugged it in the computer.  It is now not recognized by itunes and is in the infinate loop of flashes and flickers.
    6. When not connected to the computer there is nothing just black.
    7 It also does the flashing and flickering when plugged into the wall.
    8.  I did go back and carefully disconnected all connectors and reconnected them all as I saw this as a solution in a post.  Still flashes and flickers when plugged in.
    9 None of the reset procedures do anything.
    Ok all you experts what is the issue?  It is very frustrating especially since it was working.

    same problem as mine, don't know what to do either, when you find out please post.
    thanks!

  • I got an ipod nano 6th generation will an ipod touch charger work

    Iv got an ipod nano 6th generation 16gb and well woundering if a ipod touch or normal ipod charger will work on it

    Yes it will I have done it many, many times

  • I have an iPod Nano 6th Generation for just over three months and the down volume button is sticking.  Does anyone have a recommendation for resolving?

    I have an iPod Nano 6th Generation for just over three months and the down volume button is sticking.  Does anyone have a recommendation for resolving?

    Dont buy this model again, this is the most common problem and i have gone through 4 of these 6th gen nanos all with the same problem.  You can find youtube videos that show you how to fix it yourself but you run the risk of breaking your ipod, also opening the ipod voids any warrently.

  • HT1339 I have tried restoring an Ipod Nano 6th Generation but it seems to keep looping back and saying it is in recovery and needs restoring, can anyone help?

    I have tried restoring an Ipod Nano 6th Generation but it seems to keep looping back and saying it is in recovery and needs restoring, can anyone help?

    Try doing a level reformat of the iPod's flash storage instead to see if that kills the restore loop using the instructions in the article below.
    http://www.methodshop.com/gadgets/ipodsupport/erase/
    B-rock

  • I have an iPod nano 6th generation and I downloaded 3 music videos but they won't play on my iPod. They only play on my laptop/iTunes. How can I get it to work?

    I have an iPod nano 6th generation and I downloaded 3 music videos but they won't play on my iPod. They only play on my laptop/iTunes. How can I get it to work? I know that my iPod should take music videos because there is a pre-made playlist called "Music videos". Can anyone help me please????

    You can sync the music videos, but they won't play on your 6G Nano, because it does not support video playback. Sorry.
    B-rock

  • The volume increase button is stuck on my iPod nano (6th Generation) and I can't turn the volume up. Is there a way to fix it?

    I have the iPod nano 6th generation, and I have had it since Christmas 2011 so it isn't that old; recently I went to listen to my music and found that the volume increase button is stuck (basically it's like when you press the volume button down to increase the volume, except it is stuck down like that and won't come back up) but it was only stuck about 3/4 of the way down. For about a week this was ok, I just had to press the button harder to make it go down and increase the volume, but now it won't increase the volume at all and it feels and looks as though the button is stuck the whole way in, even when I press the button with some force. I was wondering if anyone knew how I could fix it or if I need to take it to an apple store for them to fix it?!
    Sorry if the way I have explained the problem is confusing, it's difficult to explain but it's extremely frustrating.

    This happened to me a few weeks ago.  Instead of taking it to the Apple store and paying $ the 99 service charge ( I did give Apple 139.00 13 months ago! for this ipod), I saturated the end of a q-tip w/ WD 40 and carfefully rubbed around the perimeter of the power button.  I waited a half hour and then cleaned of the excess WD 40.  This unstuck my power button.  I guess the WD 40 dissovled all the dirt under and around (also the consrtuction of the buttons is done w/ double sided tape-- maybe a design issue) the button.  A friend tried isopropyl alcohol w/ great results.  Try this before you give Appple any more $$ or get a new ipod.  It's been 6 wks. and my button functions perfectly,

  • My Ipd Nano 6th generation isn't recognized by my computer or iTunes. I've followed all the troubleshooters and have uninstalled and reinstalled iTunes numerous times. I've checked for legacy software under device manager but I keep getting error 10.

    My Ipod Nano 6th generation is no longer recognized by iTunes & my computer. I did all troubleshooting steps. After checking for changes and reinstalling legacy software in device manager I keep getting an error 10 message (device can't start). My device is charging when I plug it in and is otherwise still functioning normally. Can anyone help me please?

    Universal Serial Bus controllers
         Intel(R) ICH9 Family USB Universal Host Controller - 2934
         Intel(R) ICH9 Family USB Universal Host Controller - 2935
         Intel(R) ICH9 Family USB Universal Host Controller - 2936
         Intel(R) ICH9 Family USB Universal Host Controller - 2937
         Intel(R) ICH9 Family USB Universal Host Controller - 2938
         Intel(R) ICH9 Family USB Universal Host Controller - 2939
         Intel(R) ICH9 Family USB Universal Host Controller - 293A
         Intel(R) ICH9 Family USB Universal Host Controller - 293C
         USB Composite Device
         USB Root Hub
         USB Root Hub
         USB Root Hub
         USB Root Hub
         USB Root Hub
         USB Root Hub
         USB Root Hub
         USB Root Hub
    I'm not sure if it charged when I hooked it up to my roommate's computer, but it definately didn't register either. If I put it on the dock it plays so the port is fine, but that still doesn't help me sync it to my computer.

  • ITunes and my Mac don't recognize my iPod Nano (6th generation) under devices?

    iTunes and my Mac don't recognize my iPod Nano (6th generation) under devices? I have tried rebooting/resetting and reinstalling iTunes already. I have also checked the ports and cables, what can be done?

    Try here.
    iOS: Device not recognized in iTunes for Windows
    Could be your security software and firewall preventing iTunes from recognizing your iPod.
    Disable antivirus software
    Turn Windows Firewall on or off

  • When i plug in my ipod nano (6th generation) a message comes up saying it's 'detected but not identified' i've spend like all day trying to solve it, uninstalled it, reinstalled it and nothing seems to work..

    when i plug in my ipod nano (6th generation) a message on itunes saying the ipod is 'detected but not identified'- i've spent all day trying to fix it and nothing seems to work so i can't sync any songs..

    Hello beafraser,
    Here's an article to help troubleshoot when your iPod is detected but not identified.
    iPod nano: Error message saying that iPod 'could not be identified properly'
    http://support.apple.com/kb/ts3218
    Hope that helps.
    Thank you for visiting Apple Support Communities.
    Nubz

  • My ipod nano 6th generation does not start on pressing the sleep/pause button  or pressing both sound low and sleep pause button.it starts while connected to power it is fully charges

    i have an ipod nano 6th generation .version 1.2 yesterday i  restored it on i tunes  using my system window 7. for the last few days it does not start when the sleep/pause button is pressed.or even by pressing the both button sleep/pause and sound minus..It starts while connected to power. and then continues working. I can not put off it and it automatically goes off after some time its performance is ok  after starting by connecting to power and then disconnecting the cord.
    what would be the reason and what to do?>

    Call Apple Care as you are still under warranty.  

  • HT1459 MY IPOD NANO 6TH GENERATION WILL NOT TURN ON I GOT IT FOR CHRISTMAS AND PLAYED THE RADIO ON IT WITH OUT PLUGING IT INOT ITUNES AND I WAS WONERING HOW TO FIX IT ?

    hi my ipod nano 6th generation will not turn on what should i do ...no batery left and never pluged it into itunes

    Hi meganisawsome,
    If your iPod will not turn on and you are getting indicators that there is no battery left, the first step would be to make sure that the iPod has been charged correctly. You may find the following article useful:
    Apple Support: Charging your iPod battery
    http://support.apple.com/kb/HT1384
    If you are still having issues after charging, you may want to look at this article:
    iPod nano (6th generation): Hardware troubleshooting
    http://support.apple.com/kb/TS3474
    Regards,
    - Brenden

  • Good afternoon, I would like some information I have an ipod nano 6th generation and has the same one-year warranty is only 2 months of use, and it fell down and broke the glass of the display, I called technical assistance in Brazil and informed me that

    Good afternoon, I would like some information I have an ipod nano 6th generation and has the same one-year warranty is only 2 months of use, and it fell down and broke the glass of the display, I called technical assistance in Brazil and informed me that Brazil has no repair services for Apple, which was the basis of its price change in the exchange is not worth half the value of the product.
    I wonder how I do to change this device without the expense of 50% for the same product is in warranty?
    Thanks in advance.

    yes agree, plus a multinational seeing a product and has no technical assistance to do the maintenance then it's no use I buy a new product if it is damaged I will always be because it has no prejudice in this maintenance.
    sorry but even more products coming from China to Brazil in technical assistance.

  • TS3218 My iPod Nano 6th generation fell one time and it kept working with a small crack in the screen.But after a while it just gave out and does not turn on.I try to charge it and all it does is blink the apple icon on and off.When disconnected nothing h

    My iPod Nano 6th generation fell one time and it kept working with a small crack in the screen.But after a while it just gave out and does not turn on.I try to charge it and all it does is blink the apple icon on and off.When disconnected nothing happens.

    I am having the identical trouble as described above with my month old Macbook Air. I tried everything with the ditto results. Please help anyone!
    Mine is a Macbook Air 13', 128GB, 1.86GHz with 4 GB RAM.

  • My iPod Nano 6th generation iLive speaker system quit on me and now I cannot find a compatible speaker system.  I don't want tiny personal speakers, I use this for music in the family room.

    I have 2 iPod Nano 6th generation.  I had them setup with different music from iTunes and I had an iLive Bluetooth docking and speaker system that charged and played them with speakers spaced in the family room.  Not a little personal setup but for reasonably loud music for the whole room.  My iLive system died on me.  It had the 20 pin place to plug in the iPod nano and a clock and the two speakers that were bluetooth.  It was the perfect setup for me.  Now that model has been discontinued and I cannot find anything like it.  Does anyone know what a good option is?  These iPods are only a couple of years old and now obsolete because they don't make anything to play them on.  I don't use earbuds, it's not what I bought them for.  One has our jazz music collection, the other has Christmas music.  I want to hear it throughout the house.

    Sorry typo it had a 30 pin place to plug in the iPod Nano

Maybe you are looking for