Nano 6th generation I attached the motorola D650 bluetooth adapter and it says unsupported device... Any suggestions?

Nano 6th generation and i connected the motorola D650 bluetooth adapter and it says unsupported device?  Any suggestions, this should work as Apple told me it would and instruction manual for headphones specifically mentioned Ipod.
Thanks

I've heard that there are some Ipod adapters out that will work with this trick but it would be nice if anyone knew a way to make this adapter work. I think it is a popular trick since the adapter from oakley that does work is now on back order.

Similar Messages

  • Hello, my ipod nano 6th generation is with the black screen, now restored, already pressed for 8 seconds and decrease volume botação start and not resolved, can someone help?

    Hello, my ipod nano 6th generation is with the black screen, now restored, already pressed for 8 seconds and decrease volume botação start and not resolved, can someone help?

    I am currently having this same problem. This nano lasted me less than 2 years.

  • HT1339 I have tried restoring an Ipod Nano 6th Generation but it seems to keep looping back and saying it is in recovery and needs restoring, can anyone help?

    I have tried restoring an Ipod Nano 6th Generation but it seems to keep looping back and saying it is in recovery and needs restoring, can anyone help?

    Try doing a level reformat of the iPod's flash storage instead to see if that kills the restore loop using the instructions in the article below.
    http://www.methodshop.com/gadgets/ipodsupport/erase/
    B-rock

  • I cannot receive a verification email from icloud on my comcast email account.  I have tried looking in spam, going to appleid and asking to resend the verification email many times, and I get nothing.  Any suggestions? Thanks.

    I cannot receive a verification email from icloud on my comcast email account.  I have tried looking in spam, going to appleid and asking to resend the verification email many times, and I get nothing.  Any suggestions? Thanks.

    Most likely it is blocked on server level, you need to go to account settings and unblock everything that has word apple in it. Also just to make sure, verify that you didn't misspell your e-mail address.

  • I cannot turn off shuffle on my nano 6th generation.  every play list is on shuffle and I am about to stomp on it!

    I cannot turn off shuffle on my nano 6th generation.  Every playlist is on shuffle. Have reset, have tried everything. Help?

    It needs to be dried out. Stop using it.. don't turn it on. Put it in a zip lock bag with some rice or one of those packets of dessicant for a day or two. That might do it.
    i
    (And stop taking it into the sauna... or swimming)

  • Itunes does not recognize my 6th generation ipod nano.  I installed, unintalled the progam...can't get it to work. any suggestions?

    can't get my itunes to recognize my 6th generation nano.  I have installed/uninstalled.  Restarted and I can't get it to work.  Any suggestions?

    1. Update iTunes to the latest version. Plug in your iPod. If iTunes still can't recognize it, then in iTunes in the top left corner click help> run diagnostics. On the box that comes up, check the last two things. Click next and it should identify your iPod.
    2. Click on your windows start menu. Type in "services". Click on it and when it pops up, on the bottom of it click on "standard". Now Scroll down to find "Apple Mobile Device" Right click it when you see it and click on "Start". When it has started, close iTunes and replug in your iPod and it should show up.
    3. Check the USB cable
    4 Verify that Apple Mobile Device Support is installed
    5. Restart the Apple Mobile Device Service and verify that the Apple Mobile Device USB Driver is installed.
    6. If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job
    7. Check for third-party software conflicts.

  • I have iTunes ver 10 on a PC with Playlists which do not sync to ITouch or Nano (6th Gen). All the music does not appear and the playlists do not appear at all. I have selected to manually manage music on the sum tab

    I have iTunes ver 10 on a PC with Playlists which do not sync to an Itouch or Nano (6th Gen). Also, all the music does not appear when I check entire library and there is enough memory on the device. When I select to manually manage music on the summary tab and selected playlists on the music tab nothing changes. Either way all the music isn't on either device and the playlists are not on either device. Please advise next steps. Thank you.

    Connect the device to the computer.
    In iTunes, select the content desired to sync.
    Sync.
    This is all described in the User's Guide, reading it may be a good place to start.

  • My ipod nano 6th generation got dropped in water for 3 seconds and now will not work

    Any suggestions, my ipod 6th generation got dropped in the pool and immediately got pulled out, it workled again then but now wont turn on.

              See this article! (i'v heard this actually works [sometimes]). You might also try rapping your ipod in a towel and letting it set in the sun for a day! However, if these do not work you may need to take it to your local apple store for repair!

  • My wife's new iphone4 (a replacement for a 5 month-old iphone 4 with home button issues) is not recognized by itunes. Every other ios device in the house using that computer and Apple ID is. Any suggestions?

    My wife's brand new iphone4 (which was a replacement for a 4month-old iphone4 with home button issues) is not recognized by itunes. Every other ios device on  the computer/Apple ID in question is recognized and syncs perfectly. Any suggestions?

    If the new phone has already been setup, make sure the phone and iTunes are both set to the same account.
    You might also have to authorize this computer for the new device under the store menu.

  • IPod Nano 6th Generation: What's the standby time for the new iPod Nano?

    This hasn't been mentioned anywhere that I know of.

    Four hours with usage, is based on how heavily you have been using it, which affects how fast the battery drains, so that looks reasonable.
    The charging time varies for different devices so you should not take the suggested time as an absolute value, it is only a suggestion.  You are getting good battery charge performance, looks good.

  • Nano 6th generation - shuffle reset to song 1 after turning off

    I listen to my Nano 6th generation while commuting. I have shuffle on and it works fine during the week, when it just goes to sleep overnight. But over the weekend, with a more than two day break, it turns itself off. When I start it again it's on the song it was about to play before the weekend, but it's back at song 1 of xxx. This definitely didn't happen with my previous iPod - an old 1st generation Nano. Is this a feature or a bug?

    From what others have stated, it seems to be a feature of the device.
    B-rock

  • Nano 6th Generation Sync'ing problems

    How do I sync my ITunes library from my computer with windows 7,  to my replacement ipod nano. When I plug the nano into the computer the nano says sync'ing for about 3 seconds but does not upload any of my songs or books. The ipod then goes to the message "Connected, eject before disconnected".
    How do I get my iTunes library onto my new replacement nano 6th generation.

    This is the ipod touch forum
    You need to post in the ipod nano forum

  • IPod Nano 6th Generation Pedometer

    I have a brand new iPod Nano 6th Generation, which has the built in Pedometer into it. For some reason, when I go to use it with Nike+ and syncing it to iTunes it doesn't work. None of the Walks I have done actually go onto the Nike+ website. Nike+ claims I have no devices.
    I have it set to Automatically Send to Nikeplus.com
    I already have a Nike+ account, and I have alone tried to sync walks. It claims there sync'd, and I click Visit Site, but it takes me to http://nikeplus.nike.com/plus/?token=blahblah=2&wtype=pedometer, but then I click around and there are no devices.

    I have a nano6.
    I am not able to synchro.
    But reading Nike guide on the nano6 I have found that, you can read it on this discussion:
    ipod nano and nike plus
    or :
    (http://nikeplus.nike.com/plus/active)
    “Nike+ Active is taking a break.
    The site will be down while we move to the new Nike+. Your steps, runs and gym workouts are safe and sound. When Nike+ Active returns this fall, your data will be there -- on a platform that lets you do more than ever before. Thanks for conquering the world with us, and, in the meantime,check out the new Nike+.”
    Is this the answer? It is so...big that I am not even convinced. Have they closed the site for 2 month or more just to develop a new site!?
    other cases in:
    TA24232 Nike+ temporarily unavailable
    nike+ website temporarily unavailable

  • Ipod nano 6th generation hot

    My ipod nano 6th genration gets very hot when plugged via USB and remains black screen. Any help? THX

    Thanks, I have to call back 800 692-7752 - the hours are 6AM - 6PM Pacific Time. The recorded message reccommends the site https://expresslane.apple.com  - you need your device serial number for this.  It's a shame Apple placed this number under the tiny clip on the 6th Generation Nano.  (!!!)  
    Looks like I'll be waiting for the help line to open  :/

  • The volume increase button is stuck on my iPod nano (6th Generation) and I can't turn the volume up. Is there a way to fix it?

    I have the iPod nano 6th generation, and I have had it since Christmas 2011 so it isn't that old; recently I went to listen to my music and found that the volume increase button is stuck (basically it's like when you press the volume button down to increase the volume, except it is stuck down like that and won't come back up) but it was only stuck about 3/4 of the way down. For about a week this was ok, I just had to press the button harder to make it go down and increase the volume, but now it won't increase the volume at all and it feels and looks as though the button is stuck the whole way in, even when I press the button with some force. I was wondering if anyone knew how I could fix it or if I need to take it to an apple store for them to fix it?!
    Sorry if the way I have explained the problem is confusing, it's difficult to explain but it's extremely frustrating.

    This happened to me a few weeks ago.  Instead of taking it to the Apple store and paying $ the 99 service charge ( I did give Apple 139.00 13 months ago! for this ipod), I saturated the end of a q-tip w/ WD 40 and carfefully rubbed around the perimeter of the power button.  I waited a half hour and then cleaned of the excess WD 40.  This unstuck my power button.  I guess the WD 40 dissovled all the dirt under and around (also the consrtuction of the buttons is done w/ double sided tape-- maybe a design issue) the button.  A friend tried isopropyl alcohol w/ great results.  Try this before you give Appple any more $$ or get a new ipod.  It's been 6 wks. and my button functions perfectly,

Maybe you are looking for

  • Delivery Schedule through Email

    Dear Experts, I have a doubt...Can we send Delivery Schedule for a Scheduling Agreement through a mail to respective vendor... Is it possible through ME9E??? Any one can help me, Please.. Thanks and Regards Mk

  • Af:treetable with af:tableSelectMany

    HI I'm currently using a af:treetable with af:tableSelectMany for select many rows from a tree. I need any checkbox checked before load the af:treetable with af:tableSelectMany , What method is neccesary? Thanks / Ali

  • HT4085 No sound on iPad2 tried everything to fix. Cannot acces the sound bar. Help!

    I have no sound on my iPad for games, YouTube etc I have tried a few things from other blogs to no avail.

  • Spry:if functions with parameters

    Hi thanks for reading, I am trying to validate a date range, so im using a javascript function checkDate(start,end). I thought this is where I use a spry:if but maybe I am wrong? ----------------BeginCode------------ <script> function checkRange(star

  • Error importing with impdp after applying a patch for oracle 11g

    Hello guys, I recently unistalled all the oracle software with my database in order to start all fresh. I then installed the database and applied a patch from the version 11.1.0.6.0 to 11.1.0.7. I used the DBUA to do such a thing and it worked wonder