Nano 6th generation - shuffle reset to song 1 after turning off

I listen to my Nano 6th generation while commuting. I have shuffle on and it works fine during the week, when it just goes to sleep overnight. But over the weekend, with a more than two day break, it turns itself off. When I start it again it's on the song it was about to play before the weekend, but it's back at song 1 of xxx. This definitely didn't happen with my previous iPod - an old 1st generation Nano. Is this a feature or a bug?

From what others have stated, it seems to be a feature of the device.
B-rock

Similar Messages

  • HT201413 my iPod Nano 6th generation won't appear on iTunes after i updated it

    when i connect my iPod Nano 6th Gen to my laptop (Windows 8) it doesn't appear on iTunes, and that happened after i updated my iTunes to the latest version, a message appears (after i connect my iPod) and says "An iPod has been detected but it could not be identified properlyi've tried all of Apple's troubleshooting tips but nothing seems to actually work ... what sems to be the probleme ? everything was ok before the iTunes update

    Hello delilahca,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    Best of luck,
    Mario

  • Nano6: Remember what songs in shuffled playlist have been played after turning off?

    If I'm listening to a playlist on my Nano6, and it's set to "shuffle," if I pause and then turn my iPod off, will it "remember" which songs in the list have already played when I turn it back on? Or will it shuffle through even those songs already played?   
    Thanks

    Is there any way to do this?
    No.
    Is there any quick (one or two clicks) way to toggle shuffle option from "off" to "songs"?
    No.
    You can send suggestions to Apple here -> http://www.apple.com/feedback/

  • Ipod nano 6th generation won't shuffle entire library when connected to car

    Hello,
    I have been connecting my ipod nano 6th generation to my car (a Citroen DS3) using the usb cable. The problem I have is that the music defaults to playing alphabetically through the artists and will not allow me to shuffle my entire music library. I can see my library, arranged by artist, on my cars display and can select which artist I want to listen to, but the car itself will only allow me to shuffle songs for the artist that is currently playing and not the entire library. I cannot control the music that is playing via the ipod itself as it locks itself as it is being used as an accessory.
    Has anybody got any ideas?
    Many thanks,
    Abi

    Thanks, I have to call back 800 692-7752 - the hours are 6AM - 6PM Pacific Time. The recorded message reccommends the site https://expresslane.apple.com  - you need your device serial number for this.  It's a shame Apple placed this number under the tiny clip on the 6th Generation Nano.  (!!!)  
    Looks like I'll be waiting for the help line to open  :/

  • I cannot turn off shuffle on my nano 6th generation.  every play list is on shuffle and I am about to stomp on it!

    I cannot turn off shuffle on my nano 6th generation.  Every playlist is on shuffle. Have reset, have tried everything. Help?

    It needs to be dried out. Stop using it.. don't turn it on. Put it in a zip lock bag with some rice or one of those packets of dessicant for a day or two. That might do it.
    i
    (And stop taking it into the sauna... or swimming)

  • I have an ipod nano 6th generation. I purchased approximately 15 songs. They appear in my purchased list but won't sync up. What to do?

    Can anyone advise me on my nano 6th generation not syncing with newly purchased songs? The songs appear in my purchased list but simply won't sync to my nano. There is plenty of memory left. I am using Windows 7. Never had an issue before. Thanks!

    Hey,
    You can try once restore your ipod nano and than sync your purchased song.
    i hope that will work..... try once if its work plz updata me

  • HT1320 I tried all the steps to reset my nano 6th generation and it still won't turn on. What do I do then?

    I tried all the steps to reset my nano 6th generation and it still won't turn on. I've had this since February and just started having problems about a week ago after I charged it. Now I can sometimes get it to turn on but mostly it just stays off, I can't even reset it with it plugged in. I have noticed that it get really warm to the touch when it's plugged in and if I let it cool down I might have some luck but soon I have the same problems.

    iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting - http://support.apple.com/kb/HT1430
    iOS: Not responding or does not turn on - http://support.apple.com/kb/TS3281
    iTunes: Backing up, updating, and restoring iOS software - http://support.apple.com/kb/HT1414
    iOS: Unable to update or restore - http://support.apple.com/kb/HT1808 - recovery mode (e.g., cannot connect to computer last used to sync device)
    How to reset iPod - http://support.apple.com/kb/HT1320
    http://www.apple.com/support/ipod/five_rs/
    DFU mode: http://osxdaily.com/2010/12/04/ipad-dfu-mode/

  • My ipod nano 6th generation plays , stops , fast foward and rewinds songs by itself. it also speaks song titles non stop even with the setting off . please help me.

    my ipod nano 6th generation plays , stops , fast foward and rewinds songs by itself. it also speaks song titles non stop even with the setting off . please help me.

    Found this solution in another thread, what you want to do is go into the Nike Fitness thing, go to run, go to Spoken Feedback and set it to off. This should fix your problems.

  • How do I play all tracks on an album sequentially on iPod nano 6th generation ?

    I have an ipod nano 6th generation. I want to play all tracks on an album sequentially (as if I was playing a CD) without having to select each one in turn. On my ipod nano it repeats the same song and wont move to the next one automatically. can anyone help ?

    The repeat setting can be found from the Nano's Now Playing screen.  While playing a track, swipe to the right to bring up additional controls including the scrubber bar, as well as the repeat and shuffle otpions. See page 21 of your iPod's User Guide for more assistance on the repeat setting.
    http://manuals.info.apple.com/en_US/iPod_nano_6thgen_User_Guide.pdf
    B-rock

  • Issue with Ipod Nano 6th Generation

    Hi,
    I am currently living in Japan and managed to get an iPod nano 6th generation at the Apple Store in Shibuya. However, there are a few things that I am curious as to whether or not other users are experiencing. First, my songs are set to shuffle, and sometimes when I hit next song it will shuffle through 3 or 4 (my shake to shuffle feature is OFF). Once it gets to the song, it might show one songs cover but play a different song. Also, if a song is playing and I blank out the screen, the next song will sometimes play, but sometimes it won't at all. When I wake up the screen it appears as if the next song should be playing but it isn't. So far, this has been a little disappointing. Does this sound like a problem with the software and are others experiencing anything like this? Thanks in advance!

    What you are describing sounds like tracks that have been put on your nano that are not authorized to play them.
    First, go to itunes and sort your music by "Kind" if this column is not showing, right click and select the kind column to show up. Sort by this column and scroll down, you will most likely see some music where the kind is "Protected AAC" or something like that. If you look on your nano, you will see that the tracks that are not playing are the ones where their kind is "Protected AAC".
    If this all ends up being right, you need to reauthorize your computer to play your music. Connect your ipod, then in itunes select 'Store>Deauthorize this computer'. Then, select 'Store>Authorize this computer'. Then restore your ipod and resync all your tracks. Once you are done, they should be authorized and you should be able to play them on your ipod.
    i

  • IPod nano 6th gen. shuffle problem

    Hi Everyone,
    I just bought a iPod nano 6th generation but I have a problem with the shuffle function. When I select a playlist and choose "shuffle" it shuffles ALL the songs i have on my iPod, not just the playlist I selected... I would like to shuffle just the songs in one playlist.
    How to solve this?
    Thanks!
    Nanneke

    you just have to enter the playlist. select a song, press on the center of the screen, change page(going on the right side) and then choose shuffle(pressing on the symbol!) that's the way for shuffling your playlist!

  • I pluged in my iPod nano 6th generation and it says "The iPOd cannot be synced. An unknown error occurred (13019)"

    I pluged in my iPod nano 6th generation and i says "The iPOd cannot be synced. An unknown error occurred (13019)"     It synces like 20 songs out of 1117 songs and I tried almost everything I know to get it to synce. I restarted my computer, reset iPod and got the newest version.    So please help!

    Hello Renee116,
    The fix you are looking for is found here:
    https://discussions.apple.com/message/15028503#15028503
    Hope this helps.
    ~Julian

  • IPod nano 6th generation. repeat is on, and I can't see a way to turn it off.

    I have an iPod nano 6th generation. Shake to shuttle is turned on, though I can rarely get it to work. I can't find a repeat setting, but when I select shuffle, it always repeats. I can't find anything in the manual about how to turn repeat on or off. This behavior  started a few weeks ago.

    I reset all settings, and that seemed to clear it. I had to turn some back on. I still can't find anywhere to turn repeat off or on.

  • My ipod nano 6th generation isn't recognized

    My Nano 6th generation will turn on fine, and will play music when the ear buds are plugged it.  It also will charge when connected to either my computer, my car dock or an ihome dock.  However, it will not be recognized by any of those medias when plugged it.  I-tunes will not sync or recognize my ipod when puggled in, when it is plugged into my car port it says "no line in" and when in the i-home it just won't play. 
    I have tried reseting it with no lock, have tried to it in disk mode, but have been unsuccessful.
    The support person I spoke suggested that I restore the ipod software thru itunes, but I can't even try that because my itunes/computer isn't detected my ipod when it is plugged in.
    I have also tried "shoving it in real good" as the support tech suggested. No luck.
    Any ideas? 

    This came from another thread, but worked for me.  Problem is with newest iTunes 4.62.  Unistall iTunes, as well as its helper programs (Apple Application Support, Apple Mobile Divice Support, and Apple Software Update).  Reboot, and reinstall iTunes.  It will reinstall all the other ones and you should be able to connect your nano.  Good luck.

  • Adding photos from iphoto to ipod nano 6th generation

    I want to take photos from iphoto (mac os x 10.6.8) and put them on my ipod nano 6th generation.  I can't find anything on itunes that mentions photos and my ipod doesn't show up in iphoto or applications.

    Thanks. I followed through with those instructions. Now when I go to sync, I don't want everybody else's music to show up on my ipod.  How do I sync? And if I check sync only checked songs, will it sync ALL checked songs? We have alot of songs, but I don't want all of them.  How can I manually sync?
    Thanks!

Maybe you are looking for

  • Ipod 4th gen not really connecting to wifi

    My ipod 4th gen has always worked fine a day ago out of the blue the wifi wasnt working but then i relized it was my ipod it only works when im right next to it as soon as i walk away it disconnects i have tried everything to make it work disconnecti

  • My ipad screen is broken so how much is a new screen

    my ipad screen is broken so how much is a new screen

  • FM for checking Windows Authentication

    Hi All, Is there any function module / class / method  etc available for checking windows based authentication? My purpose is to call such FM (If available) from a web based interface as RFC, Kindly advise. Thanks in advance. Regards Vipin

  • Sapxpg - connection to partner broken (SLD - SolMan)

    Hello, I've problem wtih my RFC-Connection SAPXPG_DBDEST_<host>. To collect data for dba-cockpit, we need a RFC-Connection between SolMan and SLD: RFC Destination     SAPXPG_DBDEST_HBMESA5A Connection Type  T  TCP/IP Connection                 Descri

  • ODBC Server lock database and site goes in timeout

    My configuration: Coldfusion Enterprise 9.0.1 32 bit on Windows Server 2008 Web Edition 64 bit, 4Gb Ram, 2 Xeon processors The sites using Microsoft Access Database, randomlly, go in timeout. This is due to the fact that "ODBC Server" lock the databa