Nano 6th turns on for a few seconds then screen goes black and nothing. what is wrong with it....

My 6th gen nano turns on for a few seconds, then screen goes black and nano goes off. what is wrong with it? can any one help me out? do I need new battery? do I need a full repair? or is there something I can do myself to fix it. Thanks for your help.

At the moment I say as I've fixed, momentarily:
I made a downgrade to 1.0
The problem, gentlemen, is the upgrade from 1.1 and 1.2
It is a pity that I lost all the new features offered by the new firmware , just because Apple staff could not think to try this new update, on ipods with some airtime.
I hope Apple pull out a version 1.3 with the ability to choose the feature detection, and the user can disable it at will.

Similar Messages

TS3533 if my imac is left unused for a few mins the screen goes black and is unresponsive

if my imac is left unused for a few mins, the screen goes black and is unresponsive

In addition check your Energy Saver Preferences and make sure that your Display Sleep and Computer Sleep timers are properly set to get the expected results.
For example: I want my Display to sleep after 5 min and my Computer to Never Sleep so that I can choose when to sleep it from the Apple dropdown menu.

My MacBook Pro, even when connected to the power chord, will turn on for a few seconds then shut back off. Any ideas on what is wrong?

I Am trying to turn on my MacBook Pro laptop, but when I do, it starts to turn on for a few seconds then shuts off again. It has around 80% charge and even if the power chord is connected it won't turn on. Need some help because I am out of the US right now and there are not a Mac store or anything that I could go to.

HAve you tried using a different power chord? If the power chord is not the issue, it could be the power supply inside your mac.

IPad 2 turns on then after a few seconds the screen goes black

IiPad 2 turns on then after a few seconds the screen goes black.

Hi Tsinker,
I'm sorry to hear you are having issues with your iPad. If your iPad isn't responding or starting up successfully, you may find the troubleshooting steps outlined in the following article helpful:
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
Regards,
- Brenden

Trouble with mobile site. Displays for a second then screen goes black.

Trouble with mobile site. Displays for a second then screen goes black. Using safari, 4s on Verizon. Example: m.mlb.com/lad/

I hadn't checked the site since January or so, when it worked. It might be related to the Opening Weekend skin they have on the site, but for me, it shows the top part of the page for 3 seconds while it's loading (scrolling down is impossible) and then all of a sudden it turns black, showing nothing. It's that way for every MLB mobile site.
At first:
Two seconds later:
I noticed this on 4/7/12. Does anyone NOT have this problem?
Matt

HT3576 When I pull the notification screen down after about 5 seconds the screen goes black and then the apple appears for about 30 seconds and then returns to the home screen, this is an iPhone 4 running ios7 , any ideas??

When I pull the notification screen down after about 5 seconds the screen goes black and then the apple appears for about 30 seconds and then returns to the home screen, this is an iPhone 4 running ios7 , any ideas??

One problem though, the top button on my phone is jammed so i cant power off the phone, anyway of resetting the phone without using the top button ?

Imac 27" Intel Core 7 CPU. Screen goes black and will not respond except with a push of power button. Second monitor connected via displayport continues to display fine. Apply Store did full hardware scan and all is fine. Did clean wipe from Mavrick back

Imac 27" Intel Core7 CPU 16 Gig RAM. Screen goes black and will not respond except with a push of power button. Second monitor connected via displayport continues to display fine. Apply Store did full hardware diagnostic and all is fine. Did clean wipe from Mavrick back to Mountain Lion but problem remains. Apple Store can do no more.

I did some more digging, it appears to be a backlight problem only. I can see the screen very dimly if I use a bright flashlight in a very dark room. It also seems to run ok if the brightness is turned down a LOT.
So I'm thinking this is a LED driver board issue or the display itself. I'll open it up and check the connection between the two and see if I can get any more clues. At least I can use it somewhat now by dimming the display significantly...

I have a first gen iPad, 64g, and for no apparent reason, the screen goes black and whatever app I am using is closed on me. It seems to be happening more and more frequently, especially when loading a blog, or trying to watch a YouTube video. I try to o

I have a iPad, 32g, and for no apparent reason, the screen goes black and whatever app I am using is closed on me. It seems to be happening more and more frequently, especially when loading apps, or trying to watch a YouTube video. I try to open safari or youtube again and it will often crash several times before it may or may not decide to load for me. It is extremely annoying and getting to the point where I can not use it

Standard troubleshooting steps in order are as follows:
Power the iPad off and on.
An iPad reset, which is done by pressing and holding the home button and the sleep/wake or on/off button simultaneously until you see the Apple logo and then release.
Restore your iPad with iTunes from your iPad's backup.
Restore your iPad with iTunes as a new iPad or not from your iPad's backup.
If no change after the last step, your iPad has a hardware problem.

Ever since downloading your update a few minutes ago, my computer keeps freezing up for a few seconds & then starts going again. Why? Is it the update?

I downloaded your update sent about 10 minutes ago. Ever since I did so, my computer started freezing up for a few seconds, and then it starts going again. This is annoying!!!!!!!!!!!!!!!!! Do something to fix this. It started happening with your update.

Why start a new and very similar thread to your other one which you have not responded to (have you read the replies?)
I suggest that no response is made to this duplicate thread.

My imessage wont work, when i open it the screen turns white for a few seconds then goes back to the home screen

WHEN I OPEN IMESSAGE THE SCREEN BLANKS WHITE AND AFTER A FEW SECONDS CLOSES IMESSAGE AND GOES BACK TO HOME SCREEN!!! HELP ME I HAVE NO IDEA WHAT TO DO!!!!

- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Go to Settings>Messages>Send and Receive and sing out and sing back in
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

Everytime I turn on Airplay on my iPad the screen goes black and iPad gets really laggy?

It was working fine for about 20 minutes but now when I turn it on I just get a black screen and my iPad lags ridiculous amounts. I've reset Apple TV and the iPad but it's still happening. Any one else experienced this? Or have any solutions?
Thanks in advance.

Diane69-
I've seen a few similar complaints here. I suggest you try resetting (rebooting) the iPad. Hold both the Home and Sleep buttons for several seconds until the Apple logo appears. Ignore the "Slide to power off" arrow. The iPad will restart after a couple of minutes. Resetting this way will not hurt anything, and sometimes clears up mysterious problems.
If this doesn't help, your iPad may be defective. If it is still in warranty (1 year), show it to an Apple Store Genius and you may get a new iPad on the spot.
If it is out of warranty or there is no Apple Store near you, look for an Apple Authorized Repair Center. There may be one in your city. In the US, <United States>. Outside the US, <International>
Fred

When I try powering up my phone it stays on the logo screen for a few seconds then turn off, whats wrong with it?

When I try to power up my iphone 4 32g, it will stay on the apple screen for a few seconds then turn off. even when I try connecting it to my computer it turns on for a few seconds then turns off. Whats wrong with it? and what do I do about it?

Have you tried charging it with another known working USB sync cable? After letting it sit to "charge" for at least 30 minutes, have you tried resetting the device by pressing and holding both the Select/Center and Menu buttons together long enough for the Apple logo to appear.
B-rock

My iPhone 3G phone button no longer works. If I push it I get a black screen for a few seconds then back to the home screen. Everything else is ok. Any ideas how to fix this?

The phone button on my iPhone 3G no longer works. Everything else on the iPhone works fine. I can receive incoming calls. I can make calls directly from Contacts. But if I press the phone button I get a blank white screen for a few seconds then it goes back to the home screen. I've tried the hard reset and also restoring orignall settings via iTunes but keep getting the same problem. Does anyone know how to fix this?
Thank you, Neil.

Thanks for the advice but I've tried resetting network settings and also the reset by pressing home and sleep buttons until getting the Apple logo. Still have the same problem. To be clear (because I mistakenly typed black instead of blank in the title to this thread): If I press the phone button I get a BLANK WHITE screen for a few seconds then it goes back to the home screen. I doubt it's the SIM card as I can receive calls and make them directly from contacts. What I can't do is view my favourite numbers or missed calls or access my voicemail, i.e. all the things you get to via pressing the phone button.

My nano is fully charged and when I use the earphones it comes with, the nano stops playing my music after a few seconds and turns off. But when I use another earphone, it's okay and stays on. How do I keep the nano from turning off after a few seconds?

Why does my nano keep turning off after a few seconds while I'm listening to my music? It's fully charged and brand new.

I've tried everything in the article "Troubleshooting iTunes for Windows Vista and Windows 7 video playback performance issues''. Here are my results.
My computer meets the requirements.
All software (Windows, iTunes and QuickTime) are up to date.
As for updating my drivers, I found nothing labeled 'Video'. The closest thing I found in Computer/Manage/Device Manager was to click + next to 'Display Adapters' under that I found 'Intel (R) HD Graphics Family' which I right-cicked. From the menu, instead of 'Properties', I selected 'Update Driver Software...', then I selected 'Search Automatically for updated driver software'. I saw the messages "Searching for Software... Searching online for Software... The best driver software for your device is already installed. Windows has determined the driver software for your device is up to date." I got these same messages when I searched for updated audio drivers.
My computer is already at the highest display resolution. (1366 x 768 recommended) That's as high as my resolution will go. Hmm, I noticed the article's example shows '(1920 x1080 recommended)'. Is my max 1366 x 768 resolution high enough?
As for QuickTime, deselecting 'Enable Direct3D video acceleration' had no effect. Disabling the DirectX entirely (Safe mode (GDI only)) allowed the audio to play, but there was no video, only a black screen.
As for turning on DMA, the only item under 'IDE ATA/ATAPI controllers' is 'Intel Mobile Express Chipset SATA AHCI Controller' So I right-clicked, selected 'Properties'. There's no 'Advanced Settings' tab in there. The tabs are 'General, Drivers, Details, Resources' no 'Advanced Settings' anywhere. So much for that.
'Readyboost' was already set at 'Do not use'.
No 'NVIDIA nForce Serial ATA (SATA) controllers' exist in my computer.
The problem still exists. Please help.

My iphone 4s wont turn on,it wont even charge,when it does eventually start to charge the apple icon on the screen will appear for a few seconds then itll disappear, i have tried to do the soft/hard reset but nothing happens, can anyone help me please?

My iphone 4s wont turn on,it wont even charge,when it does eventually start to charge the apple icon on the screen will appear for a few seconds then itll disappear, i have tried to do the soft/hard reset but nothing happens, can anyone help me please? do i have a dead iphone on my hands? isit worth me going into the apple store and seeing what they can do or isit pointless? please help!!!

Try to backup and restore you device in itunes...restoring the device is like removing the iOS software off the device and re-add in a newer software, after you have restore you device, MAKE SURE YOU SET UP YOUR DEVICE LIKE A NEW DEVICE, DONT NOT RESTORE FROM BACKUP!!... give the device a chance to use the newer software and see if the issue still persisting, if the issue still on going then its would be a hardware issue.
Call Apple Care and see if your device is still under warranty to get it replace

Nano 6th turns on for a few seconds then screen goes black and nothing. what is wrong with it....

Similar Messages

Maybe you are looking for