Nano 7g black screen after few seconds

I have the nano 7 and when I dont touch the display it gets black, also after 1 minute. Then I have to press the on/off button for 1 sec. and it goes again. Can I deactivate this so that I have light screen for longer time? Thanks in advance

There is not.  If you are having problems with the music pausing after the display goes to sleep, make sure your headphones are plugged all the way in, meaning there the white part of the headset is flush with the body of the Nano.
B-rock

Similar Messages

  • Black screen for few seconds and only mouse can be seen and moved

    Hi all,
         Sometimes, after logging in appears the desktop and programs, but after few seconds, the screen goes black, only mouse can be seen and moved, and after few seconds again it go to sleep mode. why ?
         after this I log in again and it works just fine.
    Thanks,
    Harry

    This is not at all clear.  What do you mean by "the preview screen".  Do you mean Outlook invokes the Preview app or what.
    Please take the time to describe the situation, your steps taken, what you observe in clear detail using accurate descriptions.  Can't help you if you continue to be vague in what you write, I'm sorry.
    If it is an Outlook issue, you'll need to take it up in the Microsoft forums as well maybe.

  • My ipad was in the process of updating (ios7) while at the same time syncing with my laptop.  suddenly the screen turned black and after few seconds the new itune icon  appeared on the screen.  the same icon appears even after i reset it.

    I was updating my ipad (ios7) while syncing with my laptop.  suddenly the screen turned black and seconds later a huge itunes icon appeared on the screen.  the same icon appears and not the usual interface even after resetting it several times. 
    please explain whta's happening.
    thank you

    See Unable to Update or Restore  >   http://support.apple.com/kb/ht4097
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps...
    Once you have Recovered your Device...
    Re-Sync your Content or Restore from the most Recent Backup...
    Restore from Backup
    http://support.apple.com/kb/ht1766

  • Pointer disappearing from screen after few seconds

    Been away for few days, don't remember this happening before, any advice please?

    This problem is most frequently associated with input devices like a trackpad or Magic Mouse - usually wireless devices. Your first course of action would be to replace the batteries. Even a wireless keyboard can exhibit skittish behavior if there's insufficient power.
    Forum help is free and voluntary. However, everyone wins if the original poster says if the advice worked, or not.

  • VMware View Session go Black screen for some seconds

    Hi Guys,
    Recently one of my client is facing issues that VDI Desktop session is going black screen for few seconds and automatically session comes back. I have increased PCoIP Configure the PCoIP session Bandwidth floor to 200. still facing same issue.
    Note : All user facing this issue is in branches and we have 2 GBps pipeline Datacenter to Branches. Normally 40% is the network utilization.

    Sorry, I was thinking the APEX 2800 cards were related to this, but that was a different ticket I was thinking of.  So scratch that.
    As far as this problem goes, I have seen this issue happen numerous times.  It only happens with users with dual monitors.  Here's a workaround: Control Panel > Mouse > Pointers > Scheme > Select a non Aero scheme
    It took VMware quite a few months, but they finally generated a KB for it and closed my ticket: VMware KB: Zero client monitors will randomly go black for 1-2 seconds

  • Macbook pro screen blacks out for few seconds?

    Hey
    Since around 2 weeks I am facing a problem with the screen, it blacks out for few seconds in a random time and then it become normal. I have Mountain Lion since more than 6 months and always it was working fine but the last 2 weeks I faced this problem so how can I solve it?
    ty

    Which model MacBook Pro do you have (e.g. "15" late 2011")?
    Clinton

  • Macbook screen goes black for a few seconds then reappears fine

    The last two days my macbook screen has gone black for a few seconds then reappeared a few seconds later. Its as if it goes to sleep for a few seconds. The two times it has done this it has been charging. I have checked for hotspots but i have not activated any. I only bought the macbook air two months ago and have been really careful with it so i am confused.
    any help? Please?
    Thanks people.

    Hello @bobbiy58,
    I understand that your HP ENVY Recline 27-k150xt TouchSmart All-in-One CTO Desktop PC is going black for few seconds and coming back. I need to ask has this just started? Like since you connected your X-box? If so have you tried disconnecting the X-box to see if it stops?
    Please re-post and let me know. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • White screen during booting up then after few seconds turned off

    Hi All, Please help me out. I uninstall itunes in my MBP using one application called AppZapper. I then wanted to restart the MBP but the computer unable to restart to the OS. It just shows a white screen with an Apple logo and progressing icon, then after few seconds it shut down by itself. I am so sad. Please help me. Thanks

    II'm having the same problem, except I've not installed anything new.
    AS soon soon as I power on my MacBook Pro ( running OS Maverick ) it boots up for two minutes and powers itself off suddenly.  All I see is the white screen with the Apple logo and a bar underneath indicating the upload progress. 

  • Sorry for my bad english. My ipod have a white screen and after few secondes somes lines appear

    Sorry for my bad english. My ipod have a white screen and after few secondes somes lines appear.

    - Try a reet:
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Next connect to computer and if it shows in iTunes restore the iPod.
    - If the screen is still white, let the battery fully drain and charge for an hour.
    - If still white screen it is time for an appointment at the Genius Bar of an Apple store.
    - If not, the try the reset and connect to iTunes and restore.  Also try placing the iPod in recovery mode and then restore. For recovery mode:
    iPhone and iPod touch: Unable to update or restore

  • Lenovo G560 - Issue with won't boot and black screen after HDD upgrade

    Lenovo G560 - Issue with won't boot and black screen after HDD upgrade.
     What happen: My laptop was working fine, no blue screen issue, no funny business at all. I bought a new SSD Intel 120 GB and thought it would be a good idea to replace the HDD. I shutdown and disconnected the power adapter, waited a couple of minutes and removed the battery. I opened up the back case and replaced the HDD. And put all the screws back and put the battery back in.
    Problem: The very first time I turned the power on, nothing happens besides a black screen. I pressed the dvd drive it works and opens up and closes. I waited for about 30 mins and still has blac screen. When I mean black screen, no bios menu, no logo, just a black screen with the fan sound on.
    I have tried these:
    1. Unplugged everything - battery, adapter, and pressed the power on button for about 60 seconds, nothing, the laptop turns on with the LED display on for both on and battery LED's. But nothing but black screen, no sound of windows loading just the fan and black screen.
    2. I tried putting back my old 2.5" and nothing but black screen.
    Thoughts and suggestions?
    Solved!
    Go to Solution.

    Hi Autoexit173,
    Welcome to Lenovo Community!
     As per the query we understood that you are facing issue with system not booting in your Lenovo G560 laptop.
    As you have mentioned that the system not booting, please try to remove the RAM and  turn on the system and check if you can hear any beep sound. Also try to clean the RAM slots and check for the issue.
    Click here for the steps to remove the RAM and refer page number 40.
    Hope this helps. Do post back if issue persists!
    Best regards,       
    Ashwin.S
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • [Solved]Black screen after "waiting for udev uevents to be processed"

    Hello friends,
    Starting from late Dec., my laptop goes black screen after "waiting for udev uevents to be processed", after updating kernel to 2.26.32.*.  The strange thing is that even the screen is black, the keyboard is working. For example, I can turn on/off the status lights of capslock and others. I guess something might be wrong with udev uevents configuration with regard to the latest kernel. I've noticed that in the new kernel, there are two drivers for intel integrated graphics. My laptop has a 855G, which is supposed to be functional by both drivers, at least according to the kernel description. Maybe because the udev is configured to use the second driver (for newer graphic chips), rather than the first driver, which caused the problem?
    Regards,
    Wen
    Last edited by Wen (2010-01-28 13:14:28)

    Have a look here: http://bbs.archlinux.org/viewtopic.php? … 70#p695670

  • Black Screen After Upgrading to Windows 8

    Hi
    I'm experiencing a black screen after upgrading a Dell N5050 B890 to Windows 8.
    Tried to refresh the installation but the problem persited. re-installed the Windows 8, the machine logged in successfully but the problem arose again after reboot.
    Urgent assistance needed 

    This problem is solved...
    I guess the problem is concerned with the display module controller in the BIOS which is having a slight compatibility issue with windows 8.
    This issue is solved by updating the BIOS of your Laptop/PC to the latest version. You can download the latest BIOS from the website of the Laptop company/Motherboard Company. 
    But for updating the BIOS, you have to start your computer/Laptop for at least one time in Normal Mode. So here are the steps to do so... 
    1) Boot the Laptop/PC.
    2) After the boot screen (The Circle Animation & Windows 8 logo), you will be presented by the lovely & awesome blank screen.
    3) Wait for 1 minute so that drivers load into the memory.
    4) Press the Power button of your laptop/PC for only a moment (Just Press and release it quickly. Don't hold. We don't want to shut down).
    5) This will force the laptop/PC to go into Sleep mode.
    6) When the laptop/PC goes in sleep, the laptop fan & other sounds will stop.
    7) After 4-5 seconds, press the power button again & release it quickly.
    8) Voilllaa!!! The laptop/PC starts & you are presented with the lock screen. Now..... Login! What are you waiting for! :P  
    This is not the permanent solution. It just lets you start you Laptop/PC.
    After updating the BIOS, I strongly suggest that you must download the latest graphics driver for your Computer/Laptop to avoid any further issues.

  • Acrobat XI Pro automatically closes itself with no messages etc. after few seconds

    Greetings all,
    I don't know why but my Acrobat XI Pro (11.0.0) automatically closes itself (with no warning, no messages etc.) after few seconds. I installed the AXI as a part of the CS6 Master Collection on my Windows 8 (x64) laptop. Just as suggested at some other posts in the forum:
    I checked the "security settings (enhanced)" tab but the protected view option is already off.
    I searched for the eula.exe under the "Program Files (x86)\Adobe\Acrobat 11.0" folder but there is no eula.exe. May it be not present because I installed it as a part of CS6 Master Coll. package?
    I am using Eset Endpoint Antivirus as a third party Anti Virus Software.
    The problem occurs when:
    I open up a pdf file from outlook etc.
    I manually open a pdf file from windows explorer
    I open adobe acrobat with no file to view
    As I mentioned above, I see no error messages or warnings during the closing down. It acts as if I clicked the close button on the top right corner. I know that there are a lot of posts in the forum about this issue, but none of them helped me to solve my problem. I would be glad if you can help me with this problem.
    Thanks,

    Hey i was having this issue also with Adobe Acrobat pro... it only seemed to be affecting one program that produced PDF output automatically. When the processes finished the PDF is supposed to be displayed and instead it would rapidly flash across the screen and close. THen i would have to hunt for the PDF to review its content. I tried a couple of things like deleting my preferences for acrobat C:\Users\[your user name]\AppData\Local\Adobe\Acrobat\10.0. You might have to show hidden files. In the explorer window select Organize-> Folder and search options-> once that opens view -> check show hidden files, folders and drives. then navigate that path above. Make sure adobe is closed then delete everything in there or move it off to another folder if your worried it will break it further.
    That did not fix the problem though. I opened the application and ran my process again same results (adobe closes pdf auttmagically). so i opened adobe acrobat and navigated to Edit -> Preferences -> look under the General tab and click the select default PDF handler and that seemed to fix my problem. I also disabled the enhanced security look further down in that list under security enhanced. then a reboot so it is possible that the enhance security setting was the cause i think i will play with that for a minute to see if it was but i think my issue was the default handling. good luck

  • IOS adhoc displays black screen after launch

    Hi,
    my iOS application displays black screen after slash screen.nothing happens and couldn't see any proper errors on debug utility.
    I can build adhoc using flash builder and it's works fine but problem occurs when I create ipa using dumped config file on command line(ant)
    I'm using flex sdk 4.6 and AirSDK 15.0(overladed) .my application includes few native extensions.
    mxmlc
    mxmlc -load-config app-config.xml src/mobapp.mxml -output myapp.swf
    adt
    <target name="build-release-adhoc-package-ipa">
        <echo>::building captive-runtime release-adhoc ipa..</echo>
        <exec executable="${FLEX_BIN}/adt" failonerror="true">
            <arg line="-package" />
            <arg line="-target ipa-ad-hoc" />
            <arg line="-storetype pkcs12" />
            <arg line="-keystore ${provision.dir}/release-adhoc.p12" />
            <arg line="-storepass 12345" />
            <arg line="-provisioning-profile ${provision.dir}/release_adhoc.mobileprovision" />
            <arg line="${adhoc.dir}/ios-adhoc.ipa" />
            <arg line="${src}/mobapp-app.xml" />
            <arg line="myapp.swf" />
            <arg line="${icon.dir}/applicationIcon16.png" />
            <arg line="${icon.dir}/applicationIcon32.png" />
            <arg line="${icon.dir}/applicationIcon36.png" />
            <arg line="${icon.dir}/applicationIcon48.png" />
            <arg line="${icon.dir}/applicationIcon57.png" />
            <arg line="${icon.dir}/applicationIcon72.png" />
            <arg line="${icon.dir}/applicationIcon76.png" />
            <arg line="${icon.dir}/applicationIcon114.png" />
            <arg line="${icon.dir}/applicationIcon120.png" />
            <arg line="${icon.dir}/applicationIcon128.png" />
            <arg line="${icon.dir}/applicationIcon152.png" />
            <arg line="${base.dir}/[email protected]" />
            <arg line="-extdir ${src}/ane" />
            <arg line="-platformsdk /Applications/Xcode.app/Contents/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPh oneOS.sdk" />
        </exec>
        </target>
    please help.

    Hi,
    my iOS application displays black screen after slash screen.nothing happens and couldn't see any proper errors on debug utility.
    I can build adhoc using flash builder and it's works fine but problem occurs when I create ipa using dumped config file on command line(ant)
    I'm using flex sdk 4.6 and AirSDK 15.0(overladed) .my application includes few native extensions.
    mxmlc
    mxmlc -load-config app-config.xml src/mobapp.mxml -output myapp.swf
    adt
    <target name="build-release-adhoc-package-ipa">
        <echo>::building captive-runtime release-adhoc ipa..</echo>
        <exec executable="${FLEX_BIN}/adt" failonerror="true">
            <arg line="-package" />
            <arg line="-target ipa-ad-hoc" />
            <arg line="-storetype pkcs12" />
            <arg line="-keystore ${provision.dir}/release-adhoc.p12" />
            <arg line="-storepass 12345" />
            <arg line="-provisioning-profile ${provision.dir}/release_adhoc.mobileprovision" />
            <arg line="${adhoc.dir}/ios-adhoc.ipa" />
            <arg line="${src}/mobapp-app.xml" />
            <arg line="myapp.swf" />
            <arg line="${icon.dir}/applicationIcon16.png" />
            <arg line="${icon.dir}/applicationIcon32.png" />
            <arg line="${icon.dir}/applicationIcon36.png" />
            <arg line="${icon.dir}/applicationIcon48.png" />
            <arg line="${icon.dir}/applicationIcon57.png" />
            <arg line="${icon.dir}/applicationIcon72.png" />
            <arg line="${icon.dir}/applicationIcon76.png" />
            <arg line="${icon.dir}/applicationIcon114.png" />
            <arg line="${icon.dir}/applicationIcon120.png" />
            <arg line="${icon.dir}/applicationIcon128.png" />
            <arg line="${icon.dir}/applicationIcon152.png" />
            <arg line="${base.dir}/[email protected]" />
            <arg line="-extdir ${src}/ane" />
            <arg line="-platformsdk /Applications/Xcode.app/Contents/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPh oneOS.sdk" />
        </exec>
        </target>
    please help.

  • Black screen after Mavericks update ?

    Hi everybody,
    First of all, I want you to know that I'm French so I want to apologize for my potential mistakes
    A few weeks ago, I updated Mavericks (because my mac told me to do that every single day .. ) on my Macbook Unibody bought in September 2010.
    After that update, I had a black screen after the "Apple logo" and couldn't do anything. I went to a Genius Bar in Paris and the technician told me that the unique solution was to format the laptop. I decided to accept this because I needed my laptop for work. However, I lost all my data (documents, pictures ...)
    Apparently, I'm not the only person in that case and the problem comes from Mavericks.
    So I want to know if someone else is also in that case, and I think that it's unacceptable that Apple does not communicate about this.
    Thank you

    Connect the MBP to a monitor.  If the monitor fails to produce an image, the GPU is suspect.  If the monitor produces an image, the display or the display connection is faulty.
    Ciao.

Maybe you are looking for