Nano 7th gen. charging issues

Is anyone else having trouble with a Nano 7th generation and brand new, that appears to be completely charged and when unplugged does not turn on?

The battery meter in the top corner seem to always stay at about 90% and would never fill up the entire way, But I just went to the store today and bought a new charge chord and that seems to have fixed the problem. Thank you for trying to help I appreciate it.

Similar Messages

IPod Nano 7th Gen Charging Issues

Over the past two days my nano charges to around 90-95% and then refuses to charge any further, also tried to connect to various usb chargers and computer usb ports. If anyone knows a solution to this its would greatly appreciated.

The battery meter in the top corner seem to always stay at about 90% and would never fill up the entire way, But I just went to the store today and bought a new charge chord and that seems to have fixed the problem. Thank you for trying to help I appreciate it.

IPOD NANO 7TH GEN AUDIO ISSUE

Hi ,
I bought a Ipod Nano 7th Gen sep last year . For last few days audio quality has been reduced a bit i.e Clarity is missing , Bits are not so powerful .
Kindly help what to do .
I already reset the same twice but not getting any result .
Thanks
GS
9051185601

@ Watanabe Thanks boss , but I checked the same with out any result and pls note I use "ROCK" in the "EQ" setting .
Hope there s not any issues with hardware .
Could you please advice some better headphone for my Nano .
Thanks for your support .
GS

Ipod nano 7th gen sync issue

I have just bought a new ipod nano 7th gen and am having issues with syncing it to my PC. On my devices the ipod is there and recognised as such, but in iTunes the ipod doesn't exist at all. I have the latest version of iTunes but can't find a way to access the iPod at all - any ideas?
The iPod is recognised on the family laptop (macbook), but not the PC. The issue is that there is some music on the PC that's not on the laptop and so would be helpful to access it via the PC and not just the macbook.

If the video is HD, the resolution is too high for the iPod's screen, so iTunes will not sync the video.
If this is a purchase from the iTunes Store, and you paid for the HD version, you may be entitled to also download the SD version (at no cost), which should sync to the iPod.
FYI - There is a command in iTunes to create a new version of the video, which should sync to iPods
menu bar -> File -> Create New Version -> Create iPod or iPhone Version
However, videos purchased from the iTunes Store (such as movies and TV shows) have copy protection, so that command is disabled.

Nano 7th gen bluetooth issues

Today my nano shut off and would not turn on. I waited a hour and tried holding the buttons and it turned on. Everything was good. A problem I had a few weeks ago was when the nano was shaken the blue tooth starts to disconect and reconect. After it turned off and would not turn on until now it is having more bluetooth issues. I use this to run and my head phones are moterola blue tooth running head phones. Does the nano have issues with this??
I reformated and everything. Should I return it??

The Nano has only two profiles, A2DP (Stereo Bluetooth, allowing it to connect with compatible headphones/speakers), and Low Energy, to connect with pulse meters, etc. It does no have File Transfer Protocol so you cannot use it to sync with your iPad or Samsung S3.

IPod Nano 7th Gen says "Unsupported. Accessory is not supported" when trying to charge / sync

iPod Nano 7th Gen says "Unsupported. Accessory is not supported" when trying to charge / sync with official apple lightening cable.
It worked for almost a year then suddenly began to say that. My computer [windows], lightening cable and my power brick [all apple official] are all the same as they were when it was working. The iPod is almost a year old now, and has worked perfectly up until about a week ago.
I have tried resetting the iPod, plugging it into different charging sources but it keeps saying "Unsupported. Accessory is not supported"
Does anyone have any ideas on how to fix it?
Thanks.

Your iPod Nano firmware and iTunes updated to the current versions?
It is very difficult to offer troubleshooting suggestions when the "os version" you are using is unknown as each os has their own troubleshooting solutions.

IPod nano 7th gen not charging

I recently got an iPod nano 7th gen 16GB slate. Whenever I plug it into my MBP using the new connector, I get the PLUG in the battery icon instead of the usual lightning. When I finally unplug the iPod after keeping it plugged in for quite a long time, it seems like I didn't charge my iPod at all (all I get in the battery icon is a red line).
Is there something wrong with the battery or the cable??

Whilst charging make sure your iMac doesnt go to sleep and try to make sure itunes is constantly open whilst connected. If this does not work try restarting the device by holding down both the home button and slep button down.
Hope this helps

Charging iPod nano 7th gen

How long should I charge my ipod Nano 7th gen for maximum charge?

The battery meter in the top corner seem to always stay at about 90% and would never fill up the entire way, But I just went to the store today and bought a new charge chord and that seems to have fixed the problem. Thank you for trying to help I appreciate it.

When I connect my iPod nano 7th gen. to my computer and open itunes, there is a message that says the iPod could not be detected. Does anybody know how to fix this issue?

When I connect my iPod nano 7th gen. to my computer and open itunes, there is a message that says the iPod could not be detected. Does anybody know how to fix this issue?

1. Update iTunes to the latest version. Plug in your iPod. If iTunes still can't recognize it, then in iTunes in the top left corner click help> run diagnostics. On the box that comes up, check the last two things. Click next and it should identify your iPod.
2. Click on your windows start menu. Type in "services". Click on it and when it pops up, on the bottom of it click on "standard". Now Scroll down to find "Apple Mobile Device" Right click it when you see it and click on "Start". When it has started, close iTunes and replug in your iPod and it should show up.
3. Check the USB cable
4. Verify that Apple Mobile Device Support is installed
5. Restart the Apple Mobile Device Service and verify that the Apple Mobile Device USB Driver is installed.
6. If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job.
7. Check for third-party software conflicts.

I just bought a iPod nano 7th gen and having issues with clear radio channels. Please help.

I just bought a iPod nano 7th gen and having issues with clear radio channels. Please help.

You can send it in to them: https://expresslane.apple.com/GetproductgroupList.action?PRKEYS=PF3

My ipod nano 7th gen is stuck on a loop of turning on and off.

My ipod nano 7th gen is stuck on a loop of turning on and off, I've already done the reset, and everything that was recommended on other similar questions. it isn't recognized by iTunes except in recovery mode where it allows me to restore but then goes right back to turning on and off once i'm back to normal play mode. Once on recovery mode it works fine and doesn't turn on and off. I've also uninstalled and reinstalled itunes to avail. I'm super frustrated and am hoping that I won't need to buy a new one. Is there anything else I can do before i just toss it out? i'm getting a bit frustrated just watching my ipod turn on to the apple and then turn right back off.

Hi there tksunrise,
You may find the troubleshooting steps in the article below helpful.
iPod nano (7th generation): Hardware troubleshooting
http://support.apple.com/kb/TS4433
Will not turn on or screen remains dark
Connect iPod to power for at least ten minutes to ensure that the battery has enough charge to allow iPod to turn on.
If iPod does not turn on after ten minutes, try resetting it while it is still connected to power. Reset the iPod by holding down the Sleep/Wake button and the Home button for at least six seconds or until you see the Apple logo appear.
If the Apple logo appears on the display, connect iPod to a computer and verify that it appears in iTunes and can play music. If iPod appears in iTunes and can play music, no further troubleshooting is needed.
If the screen remains dark and will not turn on, then your iPod may need service.
Issue not resolved
If the issue is still not resolved, please read this information on servicing your iPod.
-Griff W.

My ipod nano 7th gen has suddenly gone black and it wont turn on or connect to a power source.

I was listening to my ipod nano 7th gen when it went black and the music stopped playing. It wont turn on when i press the power button and when i connect it up to charge the screen doesn't turn on. Can anyone tell me how to turn it on again or give me suggestions.
Much appriciated,
MissC@t

Hey MissC@t,
Although the following article says 6th generation, most of the troubleshooting steps should still apply to your 7th generation nano. I'd go through the troubleshooting steps and see if that resolves the issue:
iPod nano (6th generation): Hardware troubleshooting
http://support.apple.com/kb/TS3474
Have a good one,
Delgadoh

IPod nano 7th gen not recognised in iTunes using Windows 8.1

I have an older 3rd generation iPod nano and a new 7th gen nano and I would like to sync them to the same iTunes on my Dell laptop (Inspiron 7520) running Win8.1. I have also updated iTunes to the latest version.
When I connect the new 7th gen iPod nano to my laptop via USB (tried all 4 ports) I get the following error message from iTunes:
"An iPod has been detected, but it could not be identified properly. Please disconnect and reconnect the iPod, then try again."
I've been through most of http://support.apple.com/kb/TS3218 and still get the error message although I haven't tried connecting the iPad nano 7th gen to an older Win7 laptop yet with a fresh iTunes install.
When connecting the iPod nano7 Win8.1 recognises E: as an iPod very briefly after I have run a scan via McAfee. After a few seconds the E: drive disappears and iTunes reports the error message as above. Sometimes, E: doesn't disappear in Win8.1 but I still get the iTunes error message and the iPod nano itself goes from Connected to Main menu.
Any ideas how I can get iTunes to recognise my 7th gen nano? I'm not sure if this is a Win8.1 problem or iTunes.

Hello Abbey,
I would recommend the steps in this article named iOS: Device not recognized in iTunes for Windows found here http://support.apple.com/kb/TS1538. While the title of the article describes a symptom a bit different from yours, I feel the troubleshooting is still relevant.
If that does not resolve the issue, then I would suggest this article to help troubleshoot the USB connection.
iOS: Troubleshooting USB connection
http://support.apple.com/kb/ts1286
And lastly, resetting it just may do the trick.
How to reset an iPod nano (7th generation)
Press and hold the Sleep/Wake button and the Home button until the screen goes dark. The Apple logo should appear after a few seconds, then the Home screen should appear.
From: How to reset iPod
http://support.apple.com/kb/ht1320
Take care,
Sterling

Ipod nano 7th GEN no audio out from head phones jack

I am trying to use my Ipod nano 7th Gen with a monster wireless remote that connects to the charging and sync connection. The remote works fine and I can control the Ipod just fine with it, but when I connect the headphones to the headphone jack there is no audio. If I remove the wireless remote receiver from the charging sync connection the headphones jack works just fine. I am using a lighting speed to a 30 pin adaptor because the monster remote receiver is of the 30 pin format if that matters.
Please let me know if this is normal or if there is a work around. My intention is to use the Ipod connected to a motorcycle sound system using the headphones connection to connect it to the motorcycle system amp and control the Ipod wirelessly.
Thank you!

Can you provide a link to the monster product, or the model name/number? If it's a Bluetooth product, it seems superfluous to connect the receiver to the dock connector, because the 7th gen nano has built in Bluetooth.
So, IF the remote control device is Bluetooth, you may be able to pair to it from the nano without connecting the receiver device to the dock connector.
If it's not Bluetooth, you may be able to find an equivalent remote control device that IS Bluetooth, and not need to connect anything to the dock connector, which seems to be the source of the problem.

Ipod nano 7th gen stuck on apple logo screen

New iPod nano 7th gen. At first attempt to upload songs, was prompted to update software. So, software was updated and as I was installing software update to the iPod, I got a message stating that the iPod was in the process of a restore (I think this is what it said. I didn't pay a whole lot of attention as i was not expecting any problems). I continued with the restore because nothing had been uploaded to the iPod yet so nothing would be lost. At this point, the device has been stuck on the apple logo screen for a couple of hours now. The only response I can get from it is when I do a reset. The screen will black as it should and then go right back to the logo and stay. Please help.....Son not happy as this was one of his Christmas presents this morning. Really not looking forward to a trip to the apple store on the day after Christmas.

I am afraid yo need to visit the store and possibly ask for a replacement. In some cases, doing the reset will correct any issues, but by the way you describe it, it freezes with apple logo. Better to get a replacement.

Nano 7th gen. charging issues

Similar Messages

Maybe you are looking for