Nano 7th gen frozen on language screen after reconfiguring to windows from mac. have tried resetting but no luck.

nano 7th gen ipod frozen on language screen after resetting to run on windows from mac. Have tried apple reset with no luck. Can access language change but DONE button does not respond! Any help would be very welcome.

Hey bluefly101,
If you are having an issue with your iPod nano, there are useful troubleshooting steps available on this page -
iPod nano - Troubleshooting - Apple Support
In particular I would suggest resetting your iPod -
Reset your iPod - Apple Support
And if the issue is not resolved, it may be necessary to restore the iPod -
Restoring iPod to factory settings - Apple Support
Thanks for using Apple Support Communities.
Happy computing,
Brett L

Similar Messages

TS4006 my daughter has dropped her 2 week old ipad 2 whilst talking to a friend on skype, now the ipad has a black screen but has some back ground light , i have tried resetting but nothing happens , can any one suggest other options

My daughter has dropped her 2 week old ipad 2, it has a black screen with a little back ground light, but will not turn on . i have tried resetting and holding both the reset and sleep buttons down with no responce , can anyone suggest something else i can try please

Take it to an Apple Store.

Ipod Nano 7th Gen - Is it possible to prevent next podcast episode from played episode from playing automatically ?

I have had an Ipod Nano 3rd generation for years. I mostly listen to Podcasts while walking and like to be able to select the sequence in which I listen to them. This was possible by selecting the shuffle option on the 3rd generation Nano. I have just purchased the 7th generation Nano and much to my disappointment I can't see any option to prevent Podcasts from automatically playing the next episode. This seems like a really backward step compared to the 3rd generation model. Does anyone know if it is possible to prevent next Podcasts from being played automatically with the new Ipod Nano 7th generation ?

Perhaps somebody else has figured it out, but I haven't been able to on my 7G Nano. Not without putting each podcast into a separate playlist and then syncing those playlists over to your Nano. Some people like that it continues to the next podcast automatically where as others like that it stops after each episode.
B-rock

TS1410 My IPod nano 7th generation all of sudden is not recognized by ITunes. I have tried every step provided by Apple on how to change this and nothing works. Please someone help!!

For some reason my IPod nano 7th generation is not recognized by ITunes. It has recognized it up until today. I have followed every step that is provided for troubleshooting and nothing is working. Does anyone have any suggestions?

Hello sipsy12,
Thanks for using Apple Support Communities.
For more information, take a look at:
iPod nano not appearing in iTunes
http://www.apple.com/support/ipodnano/assistant/itunes/
iPod: Appears in Windows but not in iTunes
http://support.apple.com/kb/TS1363
Have a nice day,
Mario

Ipod screen is frozen and the screen is stuck on the itunes symbol and charger sign we have tried resetting but it is not working

ipod screen is frozen and the screen is stuck on the itunes symbol and usb cable and will not clear off when we tried to reset

The picture you describe is the subject of the Update and restore alert messages on iPhone, iPad, and iPod touch support article. There are troubleshooting suggestions there.
Hope that helps.

After smc firmware update 1.1 fans keep running. Tried resetting but no luck.

After the update it shows as not installed and fans run continousl.

This is a major isssue for me as well. No fan noise whatsoever when I first got the machine and used for a few days. Right after the SMC firmware update fan runs continously at 1200RPM, but it is now auidble versus being virutally silent as before the update was applied.
Please let me know if you have contacted Apple regrading this issue and if so, what they have said.
I have started a thread on Macrumors where you can find out some further information.
http://forums.macrumors.com/showthread.php?t=1669859

Music volume control disappeared after updating to 5.0.1. Tried reseting but won't work, completely silent!

I upgraded my Iphone 4OS to 5.0.1 this morning and now the volume control has disappeared from the music. The phone is totally silent apart from when incoming calls are made. No alert noises either. Tried restoring to original settings but this hasn't worked. Any advice? HELP!

I have the same issue but just since today, i don't understand...

Water damaged ipod nano 7th gen.

I washed my ipod nano 7th gen. in the washing machine and it wont turn on. I tryed plugging it in to the charger and still wont turn on. Any help could help.

Charging it while still wet will cause damaged to your nano. Try what deggie said.....
You can try putting it in a bowl of raw rice for 4 to 5 days, charging it for a half-hour then resetting it while it is on the charger.
I done this trick a few years ago with a 5th generation nano. It turned back on.
Message was edited by: keeferaf

My Ipod Nano (3rd Gen) is stuck on the apple logo and I don't have a computer or iTunes to fix it

Says it all in the title. My 3rd Gen is stuck on the apple logo and with no computer or iTunes how am I to fix it? I'm in some money troubles at the moment and I dont have that many resources available to fix my beloved iPod. I have tried resetting but it comes back to the logo and then it dies of battery.
Any suggestions?

If you have an Apple Store, near you, make an appointment to take it to them. If it's not a hardware failure, they may be able to help.
Regards.

My phone has frozen on a zoom position I have tried resetting and restoring the phone will restore but by putting my back up files on goes back to zoom on the screen

My phone has stuck on a zoom position meaning I cannot use any of the functions. I have tried resetting but the problem reoccurs. I tried restore but although it would go back to normal as soon as I put on the back up files it goes back to the problem.
How can I get into the settings?

Double Tap the Screen with 3 Fingers...
Then go to Settings > General > Accessibility and make sure Zoom is turned Off.

IPod nano 7th generation screen frozen on "language" choice after "restore"

iPod nano 7th gen. was acting up so I went to iTunes to do a restore. Now the iPod"s start screen is frozen on the "language" choice screen, "done" button/icon does nothing. Holding the power and home button will bring up the same frozen screen.

Hi Jeff,
Welcome to the Support Communities! The resource below will walk you through the troubleshooting steps for your unresponsive iPod nano. I understand you have already tried to restore, but follow the steps in the order presented and see if that makes a difference. If not, I've included a link for getting it serviced.
iPod nano (7th generation): Hardware troubleshooting - Apple Support
http://support.apple.com/en-us/HT203681
Connect iPod to power for at least ten minutes to ensure that the battery has enough charge to allow iPod to turn on.
If iPod does not turn on after ten minutes, try resetting it while it is still connected to power. Reset the iPod by holding down the Sleep/Wake button and the Home button for at least six seconds or until you see the Apple logo appear.
If the Apple logo appears on the display, connect iPod to a computer and verify that it appears in iTunes and can play music.
If the screen remains dark and will not turn on, then your iPod may need service.
The Five Rs: Reset, Retry, Restart, Reinstall, Restore
Try these steps one at a time until the issue is resolved. If one of the following doesn't help, read on for solutions to specific issues.
Reset iPod nano. First, make sure iPod nano is charged. Then press the Sleep/Wake button and the Home button for six seconds, until the Apple logo appears.
Retry with a different USB port if you cannot see iPod nano in iTunes.
Restart your computer and make sure that you have the latest software updates installed.
Download and reinstall iTunes.
Restore iPod nano.
Restoring iPod to factory settings - Apple Support
http://support.apple.com/en-us/HT201540
How to restore iPod
Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
Download and install the latest version of iTunes if necessary.
Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
After a few moments, your iPod will appear in the Source panel in iTunes.
Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
Click Restore.
If you are using a Mac, you will be asked to enter an administrator’s name and password.
A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
Leave iPod connected to computer to complete restore (typically applies newer iPod models).
During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
Issue not resolved
If the issue is still not resolved, please read this information on servicing your iPod.
I hope this information helps ....
- Judy

Ipod nano 7th gen stuck on apple logo screen

New iPod nano 7th gen. At first attempt to upload songs, was prompted to update software. So, software was updated and as I was installing software update to the iPod, I got a message stating that the iPod was in the process of a restore (I think this is what it said. I didn't pay a whole lot of attention as i was not expecting any problems). I continued with the restore because nothing had been uploaded to the iPod yet so nothing would be lost. At this point, the device has been stuck on the apple logo screen for a couple of hours now. The only response I can get from it is when I do a reset. The screen will black as it should and then go right back to the logo and stay. Please help.....Son not happy as this was one of his Christmas presents this morning. Really not looking forward to a trip to the apple store on the day after Christmas.

I am afraid yo need to visit the store and possibly ask for a replacement. In some cases, doing the reset will correct any issues, but by the way you describe it, it freezes with apple logo. Better to get a replacement.

After upgrade to Windows 8.1, ipod nano 7th gen not recognized

/after upgrading to Windows 8.1, ITunes does not recognize my ipod nano 7th gen. I have uninstalled and reinstalled ITunes but no luck. I have gone through all steps in troubleshooting, but it still doesn't recognize it. Help!

Hi cindywindy,
If your iPod Nano is no longer recognized in iTunes after a recent system upgrade, you may find the following article helpful (apologies if you have already seen it):
Apple Support: iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/ts1369
Regards,
- Brenden

I have a bright white screen when turning on my ipod nano 7th gen. Have tried resetting etc etc. Any further ideas?

I have a bright white screen when turning on my nano 7th gen. Have tried resetting and restoring settings - no change. Any ideas please?

Hello pipworms,
I would be concerned too if my iPod nano's was just showing a white screen. I recommend following the steps below:
Display shows a white screen
Try putting the iPod into disk mode:
Reset the device (Reset the device by pressing the Sleep and Home buttons simultaneously until the display shows the Apple logo. This should take about eight seconds).
When the Apple logo appears, press and hold the Volume Down and Volume Up buttons simultaneously until the device enters Disk Mode.
While the device is in disk mode, sync it to iTunes and try to restore.
I got this information from the following article for the 6th generation iPod nano. The steps are the same, except I updated the reset steps with the reset for the 7th generation iPod nano:
iPod nano (6th generation): Hardware troubleshooting
http://support.apple.com/kb/ts3474
How to reset iPod
http://support.apple.com/kb/ht1320
Putting iPod into Disk Mode
http://support.apple.com/kb/HT1363
Thank you for using Apple Support Communities.
Best,
Sheila M.

How can I lock the screen on ipod nano 7th gen?

How can I lock the ipod nano 7th gen? Just pressing the top button doesnt cut it as it still starts to play music or pauses or change volume with the slightest knock im in 2 minds to take it back if you cant lock it as ive only had it 4 days and already found this a huge problem!

Hi! I really couldn't find no way to lock the screen, except pressing the top button (what only cancel any touch you do in the screen).
That's an old discussion about (failure vs feature), but I wonder about if you are running, you can let the screen locked and still change or pause the song by pressing the buttons on the side of the iPod)
hope I could help you

Nano 7th gen frozen on language screen after reconfiguring to windows from mac. have tried resetting but no luck.

Similar Messages

Maybe you are looking for