Nano -- Can't Get it Working on a New Computer

My wife's Nano worked fine on my old computer, but I got a new computer and it's been a nightmare. I set up the new computer, and set up a new Ipod, which works great. I then tried to get my wife's Nano working...Iinstalled the old software on the computer, I entered the serial number, and said yes when it asked whether I wanted to associate this ipod with this machine. For a few minutes, I saw my wife's nano appear in iTunes. But then it told me that my library was too big to put all the songs on the Nano...when I hit cancel (intending to go back and check certain songs), things went downhill.
Now, the Nano just flashes "Do Not Disconnect" over and over, but the computer never recognizes it...the Nano doesn't appear in iTunes anymore, so I can't eject it. I've tried resetting the nano, restoring the software, turning off the computer, pressing "menu" and select for 10 seconds, this just resets the nano briefly but then it goes back to flashing "Do Not Disconnect" again.
I'd sure appreciate some help if anyone has any suggestions. Thank you!!!!

Never mind, I pressed Menu and Select and held them for 10 seconds, and this reset somehow worked...the computer recognized the nano and began to synch properly

Similar Messages

My company runs Adobe Acrobat XI on a PC. Our PC went down and we replaced it with a new one. We need Acrobat XI on it and have bought it already. How can I get it put onto our new computer?

My company runs Adobe Acrobat XI on a PC. Our PC went down and we replaced it with a new one. We need Acrobat XI on it and have bought it already. How can I get it put onto our new computer without having to buy it again?

Hi chrisb75729216,
I checked with your account but could not find any order history so you might be using another email address on forums.
You will first need to deactivate Acrobat from old machine and then install Acrobat on the new machine by activating with the same serial number.
Please download Acrobat XI pro from here: Other downloads
If you have single user license, then remember that the software can be activated on maximum two computers, say your desktop at work and laptop at home.
Regards,
Anubha

I purchased Photoshop cs5 a while back in disk form for my old imac. Now my new laptop doesnt have a disc drive... can I get the program onto my new computer? I don't have the box, but have the old computer it's on...

I purchased Photoshop cs5 a while back in disk form for my old imac. Now my new laptop doesnt have a disc drive... can I get the program onto my new computer? I don't have the box, but have the old computer it's on...
also had a friend place inD and Ai on my old laptop and am curious to know how to get it to my new one

As long as you have your serial number, you may download and install
OLDER previous versions http://www.adobe.com/downloads/other-downloads.html

Computer Crashed with CS4 - How can I get these programs to my new computer?

Computer Crashed with CS4 - How can I get these programs to my new computer?

You will want to install them from the installation media.

I can´t get @ to work at my new Mac mini

Hi
I just bought and installed everything on my new Mac Mini 2012 from my old iMac and I chose Swedish as my language.
My OS is Mavericks
I also connected my apple keyboard and everything works OK.
Except that when I try to write a e-mail.
I can´t write @ instead a get "TM" from holding down the alt-key and the other key (nr 2 key)
The keyboard works perfect with my old iMac.
Does anybody have a clue what I should do to get @ to work.
Maybe a Swede will know what happened ?
Any help would be much appreciated
Cheers
Hans
Ps. This was not written from my Mac mini :-)

Stockholm wrote:
I can´t write @ instead a get "TM" from holding down the alt-key and the other key (nr 2 key)
The keyboard works perfect with my old iMac.
Does anybody have a clue what I should do to get @ to work.
You need go to system prefs/keyboard/input sources and use the plus and add buttons to activate the Swedish Pro keyboard and then select that one in the "flag" menu at the top right of the screen. Apple keyboards are printed with the Swedish Pro layout (and not the "Swedish" one).

Can't get phone to sync with new computer

I moved my play list to my new computer using home sharing. Now I can't get my phone to sync with the new computer. won't even give me the option to hit sync with device.

If this is a Mac in iTunes Go to Store> Authorize this computer, and put in your Apple ID information

Can't Get Songs To Play On New Computer w/ Windows 7

I bought a new computer Friday that has Windows 7. I downloaded iTunes...but I cannot play the song previews or purchased songs. It shows the song loads, but it never progresses...stays at 00:00. I can play video previews, but no music.
Is ity an iTunes thing? QuickTime thing? Windows 7 thing?
Any help would be appreciated.

Hi, I had the same problem after I installed Windows 7. My iTunes worked OK except when trying to play a track from my playlist or my Audio CD. Like you my slidebar never moved from 0.00 and I got no sound. The solution was to buy a more up to date sound card, one that is compatible with Windows 7 and Windows Media Centre as well as iTunes. I changed from a Creative Soundblaster Audigy 2 to a Creative Soundblaster X-Fi Extreme Audio and now I can play and hear tracks using iTunes. As your laptop is new I would assume that it has a Windows 7 compatible sound card but you never know it may not.
Hope it works out well for you,
Steve

Old computer is broke, how can I get my songs onto the new computer?

My other computer with Itunes and all my songs was dropped and broke. We were unable to recover any of the songs. I have all the songs on my ipod though. So I downloaded Itunes onto this new computer, and now I am trying to add my recently downloaded songs to the ipod, and it keeps telling me that I need to erase the library and replace it with the new library. I don't want to lose all the songs I have now! What can I do? Is there any way to put all the songs from my ipod into Itunes just by using the ipod??

Connect your iPod to your computer. When you get the message that it is linked to a different library and asking if you want to link to this one and replace all your songs etc, press "Cancel". Pressing "Erase and Sync" will irretrievably remove all the songs from your iPod. Your iPod should appear in the iTunes source list from where you can change the update setting to manual and use your iPod without the risk of accidentally erasing it. Also when using most of the utilities listed below your iPod needs to be enabled for disc use, changing to manual update will do this by default. Check the "manually manage music and videos" box in Summary then press the Apply button: Managing content manually on iPod
Once you are safely connected there are a few things you can do to restore your iTunes from the iPod. If you have any iTunes Music Store purchases the transfer of purchased content from the iPod to authorised computers was introduced with iTunes 7. A paragraph on it has been added to this article: Transfer iTunes Store purchases using iPod
The transfer of content from other sources such as songs imported from CD is designed by default to be one way from iTunes to iPod. However there are a number of third party utilities that you can use to retrieve the music files and playlists from your iPod. You'll find that they have varying degrees of functionality and some will transfer movies, videos, photos, podcasts and games as well. Have a look at the web pages and documentation, this is just a small selection of what's available, they are generally quite straightforward. You can also read reviews of some of them here: Wired News - Rescue Your Stranded Tunes
TuneJack Windows Only
iPod2PC Windows Only
iGadget Windows Only
iDump Windows Only
iRepo Windows Only
iPodRip Mac & Windows
YamiPod Mac and Windows Versions
Music Rescue Mac & Windows
iPodCopy Mac and Windows Versions
There is also a manual method of accessing the iPod's hard drive and copying songs back to iTunes on Windows or a Mac. The procedure is a bit involved and won't recover playlists but if you're interested it's available at this link: Two-way Street: Moving Music Off the iPod
Whichever of these retrieval methods you choose, keep your iPod in manual mode until you have reloaded your iTunes and you are happy with your playlists etc then it will be safe to return it auto-sync. I would also advise that you get yourself an external hard drive and back your stuff up, relying on an iPod as your sole backup is not a good idea and external drives are comparatively inexpensive these days, you can get loads of storage for a reasonable outlay.

HT1386 It says that I can be recognized on up to 5 computer. Well I don't have any of those computers any more. How can I get it to recognize the new computer that I am on?

I need some help on being able to sync my computer with my Iphone. It says I can do up to 5 computers and that I already have my limit. Well I have a new computer and don't have any of those 5 computers any more. What can I do?

If you don't have any of those computers you will have to email iTunes store support to reset your account. If you have just one of them, open iTunes, go to the Store menu, and choose to deauthorize all computers on the account.

Can't get purchases off iPod onto new computer?

My old laptop crashed and I have recently replaced it. I have downloaded the iTunes software and now I'm trying to get the songs from my iPod to upload to iTunes so I can manage all my music. I have authorized my computer and some of the music has transferred, but I'm getting an error message which notifies me "Cannot transfer 100+ songs as you are not authorized to play them on this computer." Then it proceeds to give me instructions to authorize the computer. When I again attempt to authorize, it tells me the computer is already authorized. I have shut down, hoping this will solve the problem, but the same thing keeps occurring. Any ideas? I have no other working computers with any of this music. I want to load up some new music but if I sync at this point all my previous purchases will be lost.

try activating / Copying as Administrator (the 'real' admin)
or, if you dnt have ipod touch, enable use as External Volume, and then copy the music files/folders AS THEY ARE from X:\iPo_Control\Music (X: is the letter of yor iPod, may be differnent) into iTunes folder, and then import them; Itunes will arrange them correctly in file system

HT1349 I switched computers (running Windows 8.1, 64 bit).   I authorized my new one.   There is no content in my library.   How can I get my library to my new computer?   I cannot deauthorize my old computer.   It died.

I switched computers.   New one runs Windows 8.1, 64 bit.   I authorized it in iTunes.   I am unable to see any of my library.   I cannot unauthorize my old computer, as it died--hence the new one.

I have only been running iTunes for a very short time, so it was not backed up.   I know my library is toast.   I can recreate that.   But I should still be able to recover my purchased songs.   There is only music involved, no movies or other media.   Still have an answer? Thanks.

Can't get Creative Cloud Apps on new computer. Download error. Please contact customer support

I've tried deleting/renaming AAMUpdater and OOBE files and reinstalling.
Please help!

Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

All the instructions how to import Bookmarks send me to "Organize bookmarks" from "Boolmarks" menu. But there is no such a option in Mozilla 4 Bookmarks menu. How can I get my bookmarks transfered to new computer?

I need to transfer my bookmarks to new computer. At this time only Mozilla 4 was available for download. But all instruction for transferring seems to be provided for previews version of Mozilla. As result I couldn't use this browser.

"Bookmarks > Organize Bookmarks" has been renamed to "Show All Bookmarks" in Firefox 4.
*[/kb/how-do-i-use-bookmarks]

HT1363 My old iPod Nano says to use iTunes to restore and I've followed all suggested help steps, but I can't get it into disk mode nor can I get it to show in my computer or in iTunes.

My old iPod Nano says to use iTunes to restore and I've followed all suggested help steps, but I can't get it into disk mode nor can I get it to show in my computer or in iTunes. I have the latest version of iTunes. Windows has all the most recent updates too. I can reset the iPod, but the message to Use iTunes to restore comes back and I am stuck.

Already tried another USB port, still nothing.
I don't have another PC to check, I only have one which is the one not working with my iPod.
It appears under my Computer, just not under iTunes. Plus, the iPod classic troubleshooting assistant doesn't work because I can't restore since it can't come up onto my iTunes! Even my iPod says "Use iTunes to Restore" once in a while, but I plug it in & I'm not able to restore it since it won't come up under iTunes.
Please help

Can t get to work tint2 launcher

I'm a beginner in arch linux and i'm trying to figure out why the laucher don't show up in my panel,
i've set up the panel the way i want but i would like to have a few launcher
I've try serveral thing but i can't get it to work,
and chromium.desktop and gparted.desktop do exist in /usr/share/applications/
tks
Here my tint2rc
# TINT2 CONFIG FILE
# horizontal panel
# squared taskbars
# idirae config
# Background definitions
# ID 1
rounded = 0
border_width = 1
background_color = #808080 20
border_color = #ffffff 10
# ID 2 - task active
rounded = 0
border_width = 0
background_color = #feffff 0
border_color = #d8d8d8 0
# ID 3 - task
rounded = 0
border_width = 0
background_color = #F5F5DC 0
border_color = #000000 0
# ID 4
rounded = 0
border_width = 1
background_color = #888888 0
border_color = #ED2323 60
# ID 5 - taskbar
rounded = 0
border_width = 1
background_color = #feffff 10
border_color = #ffffff 10
# ID 6 - active taskbar
rounded = 0
border_width = 1
background_color = #feffff 30
border_color = #ffffff 30
# ID 7 - tooltip
rounded = 3
border_width = 0
background_color = #222222 90
border_color = #222222 90
# ID 8
rounded = 0
border_width = 1
background_color = #888888 20
border_color = #888888 20
# Panel
panel_monitor = all
panel_position = top left horizontal
panel_items = LTSBC
panel_size = 100% 32
panel_margin = 0 1
panel_padding = 3 3
panel_dock = 0
wm_menu = 1
panel_layer = bottom
panel_background_id = 1
# Panel Autohide
autohide = 0
autohide_show_timeout = 0.3
autohide_hide_timeout = 1.5
autohide_height = 6
strut_policy = follow_size
# Taskbar
taskbar_mode = multi_desktop
taskbar_padding = 5 2
taskbar_background_id = 5
taskbar_active_background_id = 6
taskbar_name = 1
taskbar_name_background_id = 0
taskbar_name_active_background_id = 0
taskbar_name_font = Crisp 12
taskbar_name_font_color = #ffffff 30
taskbar_name_active_font_color = #ffffff 50
# Tasks
urgent_nb_of_blink = 20
task_icon = 1
task_text = 0
task_centered = 1
task_maximum_size = 20 20
task_padding = 0 0
task_background_id = 3
task_active_background_id = 2
task_urgent_background_id = 4
task_iconified_background_id = 3
# Task Icons
task_icon_asb = 80 0 0
task_active_icon_asb = 100 0 0
task_urgent_icon_asb = 100 0 0
task_iconified_icon_asb = 80 0 0
# Fonts
task_font = BankGothic Md BT 10
task_font_color = #696969 60
task_active_font_color = #696969 100
task_urgent_font_color = #696969 100
task_iconified_font_color = #696969 60
font_shadow = 0
# Launcher
launcher_icon_theme = elementary
launcher_padding = 2 2
launcher_background_id = 1
launcher_icon_size = 20
# Specify icon theme names with launcher_icon_theme.
# if you have an XSETTINGS manager running (like xfsettingsd), tint2 will follow your current theme.
#launcher_icon_theme = AwOkenWhite
# Each launcher_item_app must be a full path to a .desktop file
launcher_item_app = /usr/share/applications/chromium.desktop
launcher_item_app = /usr/share/applications/gparted.desktop
# Clock
time1_timezone = :/usr/share/zoneinfo/dir/Canada/Eastern
time1_format = %I:%M %p
time1_font = BankGothic Md BT 9
#time2_format = %A, %B %d
#time2_font = Ubuntu-L 7
clock_font_color = #ffffff 80
clock_padding = 5 0
clock_background_id = 5
clock_lclick_command = gsimplecal
#lock_rclick_command =
# System Tray
systray = 1
systray_padding = 2
systray_sort = right2left
systray_background_id = 5
systray_icon_size = 20
systray_icon_asb = 100 0 0
# Tooltips
tooltip = 0
tooltip_padding = 2 2
tooltip_show_timeout = 0.0
tooltip_hide_timeout = 0.0
tooltip_background_id = 7
tooltip_font_color = #ff0000 100
tooltip_font = Roboto-Thin normal 9.0
# Mouse
mouse_middle = none
mouse_right = toggle
mouse_scroll_up = toggle
mouse_scroll_down = iconify
# Battery
battery = 1
battery_hide = never
battery_low_status = 10
battery_low_cmd = notify-send "battery low"
bat1_font = sans 8
bat2_font = sans 6
battery_font_color = #ffffff 80
battery_padding = 5 0
battery_background_id = 5
# End of config
Last edited by jolejo07 (2013-07-05 01:39:25)

I've try but can't get it working ether, i've download from Aur but when i'm trying to use the PKGBUILD with makepkg
it telling me
==> ERROR: Cannot find the fakeroot binary required for building as non-root user.
==> ERROR: Cannot find the strip binary required for object file stripping.
Last edited by jolejo07 (2013-07-05 01:45:21)

Nano -- Can't Get it Working on a New Computer

Similar Messages

Maybe you are looking for