Nano cuts off when screen goes black

Hi,
I recently traded my nano in for a 6th gen under the replacement program, it's been working fine up until now.
Whenever I press the hold button briefly to lock the screen the sceen goes off as it should but the sound is killed. Also if I don't touch the hold button at all it will play quite happily until the energy saver kicks in and the screen goes off, again no sound.
Any ideas?

think I might have fixed it.
The headphone jack had some debris in it, not much at all infact only the smallest spec of stuff. Unless the jack is seated completely, and I mean completely the ipod thinks there isn't any headphones connected and reverts to apower save mode where both the screen and sound are cut off.

Similar Messages

  • While restoring my iPod Touch second generation computer is turned off the screen goes black what do I do?

    While restoring my iPod Touch second generation computer is turned off the screen goes black what do I do?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • TS3700 why when screen goes black, music stops?

    When ever the screen goes black on my Ipod Nano, the music stops. How do I stop this from happening?
    Please Help!
    Thanks

    iPod nano (6th generation): Music stops when display turns off
    B-rock

  • When in Final Cut My MacBook Screen goes black

    I was working on Final Cut on my Macbook Pro and everything was running smoothly until I used the "help" tab to find out how to freeze frame. I moused over to the drop down window to hit the command and I either clicked on it or something around it, then my screen went black. I have a dual screen and nothing happened to my external monitor. Now the weird thing is when I use any other program my Macbook screen comes back to normal. It even comes back to normal when a Final Cut prompt windows come up on the screen but as soon as I answer the prompt the screen goes back to black. Has this happened to anyone else? Any advice would be greatly appreciated.
    Thanks

    Hit command+F12 and see what happens.
    It sounds like you've enabled Desktop Cinema Preview.
    x

  • Wifi turns off when screen goes to sleep - how can i disable this?

    running 10.8.4 on MBA 2013
    is there a way to keep wifi alive when the screen goes to sleep (automatically turns off)?
    this is very annoying that i would have some internet connected application running (eg. a download) and then the screen turns itself after a timer and also cuts the wifi. this means i have to keep my screen on if i had a big file to download. is there a way around this? i cannot find any settings addressing this issue/option.
    thank you.

    edit:
    i know there's the option "prevent computer sleeping when screen is off" under power adpter, but i would like it done while running battery.
    thank you.

  • When screen goes black,It's blurry behind at both ends and also a line behind the screen?

    when my scrren goes black,behind it on both sides is blurry and also a line going through it?

    You may be seeing some light leakage from the backlit display; some bleeding is likely normal if not too intense.  A line going through it would seem to be faulty pixels or a screen fault and is not normal.  If the device is covered by your warranty, I would take it to an Apple Retail Store or Apple Reseller to have them look at it in case you should have the display replaced for free.  You could also call Apple to document that you feel you have a serious display problem (the line).

  • Wifi disconnets when screen goes black

    This issue occurs after the latest Mavericks update
    When the screen gooes black after a few  minutues of no activity, the wifi disconnets.
    This wasnt the issue before.
    I tried to restart the mac, but it doesnt work.
    Thanks
    Stan

    Hello Stanley22
    Check out the article below to troubleshoot your issue of your Wi-Fi not maintaining a connection after going to sleep.
    Wi-Fi: How to troubleshoot Wi-Fi connectivity
    http://support.apple.com/kb/HT4628
    Regards,
    -Norm G.  

  • Iphone 5 will not stream audio when screen goes black?

    When I try to stream audio from a website and my screen shuts off, then the audio quits.

    Hello joshstull
    If the audio stops playing when the screen turns off, Try opening up Control Center from the lock screen and tap play to start it again. Once possible explanation is that audio may be a movie and when the screen turns off, so does the movie.
    iOS: Understanding Control Center
    http://support.apple.com/kb/HT5858
    Regards,
    -Norm G. 

  • Windows 7 boot camp screen goes black after windows startup screen!!!!!!

    A few days ago when I tried to start my MacBook Pro in windows 7 (enterprise) I encountered a completly black screen after the startup screen.
    1) Choose start in Windows 7 from boot camp menu (holding option after starting up computer)
    2) Windows start up screen would appear and finish
    3) For a very brief second my cursor pointer would appear and login screen would flash onto the screen, then the screen would go black
    BUT
    I CAN boot windows 7 in safe mode
    The computer is still on when screen goes black (fan still running and i can use keyboard commands to shut down the computer)
    I've been searching the Internet for DAYS to no avail
    PLEASE someone help me....... ive already tried the sfc /scannow and dskchk commands in the command prompt window

    Win 7 Enterprise is not supported by Boot Camp, you may or may not get it to work reliably, (I would not bother to try)
    Read this document then pick a supported version of Windows for your Mac.

  • TA44551 Just recently my ipod nano's battery seemed to stop working? I plug it into a charger, the ipod says it's charged, but when I take it off the charger, the screen goes black. What's going on? How can I fix it?

    Just recently my ipod nano 4th generation's battery seems to be messed up? I plug it into the charger and the ipod says it's charged, but when I take it off the charger, the screen goes black. What is going on and how can I fix it? I'm really sad because it happened so suddenly.

    Yes.  The battery appears to be shot and in need of a replacement.  This can either be done by Apple or a third party repair company.
    http://www.apple.com/support/ipod/service/prices/
    You can Google "iPod battery replacement" for third party service centers.
    B-rock

  • HT4436 On my touch I have an iCloud backup message asking me to check my settings, when I click on settings nothing happens and the screen goes black. It will not allow me to turn my touch on or off. What should I do to rectify this?

    On my touch I have an iCloud backup message asking me to check my settings, when I click on settings nothing happens and the screen goes black. It will not allow me to turn my touch on or off. What should I do to rectify this?

    Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430

  • My nano generation 6 now stops playing music when the screen goes black

    The nano recently started to do something weird.  I have been using it for a couple years with no issues.  Recently it will stop playing music as soon as the screen goes black (sleep).  it never did this before.  I have checked the settings, nothing was changed and I updated it - Restore default settings.  that didn't work. 
    Settings: Sleep Wake = next track
    It seems to work fine when I use a speaker accessory; the music continues to play when it sleeps.

    just to confirm, it is not a issue with the earphones being only partially plugged in.  I have verified this already.

  • 6th generation iPod nano automatically turns off when I push het sleep/wake button or when screen turns black after a while. How can I solve this ?

    My 6th generation iPod nano automatically turns off (=stops the music) when I push het sleep/wake button or when screen turns black for power saving mode. Does anyone know how to solve this ?
    I have already tried resetting, connecting to PC/iTunes to check the software version, turning off/on, I don't have any inspiration anymore.
    Thanks for your suggestions!

    Hi VeerleD,
    If your iPod touch unexpectedly powers off, you may want to use the steps in this article to troubleshoot -
    iPhone: Hardware troubleshooting (The steps apply for the iPod touch) -
    Specifically -
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • My iPhone 4S will not stay on it shuts off and on by its self and when its on the screen goes black

    My 4s iPhone when on the screen goes black and it shuts it's off and on by its self

    Hi macee2011,
    Welcome to the Support Communities!
    The article below may be able to help you with this.
    Click on the link to see more details and screenshots. 
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/ts3281
    Cheers,
    - Judy

  • I can not get my iPad to mirror with Apple TV. When I toggle to mirror the tv screen goes black and the iPad freezes. The iPad iso is up to date

    I can not get my iPad to mirror on Apple TV. When I toggle the tv screen goes black and the iPad freezes. Have updated the iOS to latest settings and also updated the settings on the Apple TV

    Welcome to the Apple Community.
    Try the following steps, check whether things are working after each step where appropriate, before trying the next.
    Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
    Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
    Restart the Apple TV (Settings > General > Restart).
    Restart the Apple TV by removing ALL the cables for 30 seconds.
    Restart your router. (Also try removing it’s power cord for at least 30 seconds)
    Restart your mobile device.

Maybe you are looking for

  • Disk Utility buggy?

    When I start Disk Utility (on Leopard), I get the following worrying messages: <pre>EBMacPro:Contents eboily$ MacOS/Disk\ Utility 2007-11-03 09:52:33.655 Disk Utility[7896:10b] Error loading /Users/eboily/Library/Plug-ins/DiskImages/VirtualPCDiskImag

  • Need some help with orientation  when Printing Tickets

    Hi Guys, We use an online ticketing system which when clicked on "print ticket" Safari window comes up showing the ticket as a PDF. You move the mouse to the bottom of the page, where adobe reader icon bar appears so you can print. Now currently when

  • Can't add Album Art on Covert Window

    Hi. When I select various items of an album and in the covert art window try to add a covert to all them together ( with "Item selected" active on the window ) it doesn't allow me to add the picture. If I do it to an active track, it works. If I do i

  • Zoom scroller "to fit"?

    I have a group component in a scroller.  My application will add children to this component.  The component's scale is set with a Spark HSlider.  Fine. However, I'd like to provide a "zoom to fit" button.  I can get the size in pixels of all the chil

  • Muvo v100 playback w

    hello,i recently purchased a muvo v00i used to have an older version of this mp3 player a loved it dearly before it stopped workingi use the muvo as a flash dri've sometimes in my car's usb portit used to work flawlessly on my older version of this m