Nano freezes when turning off vehicle (Volvo station wagon)

I just got a new Volvo wagon that has an iPod interface. I bought a new iPod Nano to hook up to its built-in adapter. When the car is running, it works fine but when I turn off the engine, the Nano completely freezes up and has to be reset.
Any ideas on how to fix thi?

I just got a new Volvo wagon that has an iPod
interface. I bought a new iPod Nano to hook up to
its built-in adapter. When the car is running, it
works fine but when I turn off the engine, the Nano
completely freezes up and has to be reset.
Any ideas on how to fix thi?
Yes... remove Nano before turning off engine.

Similar Messages

  • Mavericks freezes when turning off WLAN

    I recent upgraded one of my old MacBookPro boxes (Mid/Late 2007 2,2 Ghz Intel Core 2 Duo 4 GB RAM) from a clean and fresh Snow Leopard installation to OS X Mavericks.
    So far all works, execpt that WLAN is always on and when i turn it off the MBP will immediately freeze completely. No more reactions at all, not even ssh from another box works.
    I already tried this:
    PRAM Reset, SMC Reset, deleting SystemConfiguration folder (Library/Preferences)
    None of these helped.
    OS X is at version 10.9.5.
    Any help / hint on the would be nice as i really want to turn off WLAN when not needed. (Which is most of the time).
    Tx,
    TZ.

    The next time the problem happens, note the date and time the problem occurred, then go to Applications/Utilities/Console and copy the log starting at the time of the crash. Paste the log in a reply. Please do not use a screen shot as they can be hard to read. If there are repeated runs of the same messages, please post only one run. Be selective about what you post and don’t  post huge amounts. Make sure there is no personal data visible. Information learned from Linc Davis.
    Kernel Panic Log

  • ProBook 650 G1 freezes when taken off of docking station

    Have a ProBook 650 g1 when removing it from the docking station the laptop hangs, We have tried multiple docking stations this happens with all docking stations

    Thank you for your reply.  I'll give you a bit more detail.  I have two docking stations.  One was purchased for this laptop and the other one, the one I asked you about, is the one I used with my prior HP laptop.  My goal is to be able to use both docking stations at different locations. Regarding your reply, you mentioned that you are not sure if the laptop should be used with a 90w docking station, however the one my company purchased for use with this laptop is 90w.  It is product: A7E32AA and it says HP 90W Dock Station Pum1.0. That's why I asked the question.  They both appear to be 90W dock stations.  I don't know why the  VBO43AA isn't listed as a compatible dock station.  Can you think of any other reason I shouldn't use the  VBO43AA with the HP Probook 650 G1?

  • Ipod nano 6 gen hangs when turning off the backlight. That is, it doesn't respond to button presses on the touch screen.

    ipod nano 6 gen hangs when turning off the backlight. That is, it does not respond to button presses on the touch screen. He also has just a white screen instead of the desktop display. Tried to rearrange the screen from another Ipod nano, but nothing came of it - all the same ... What should I do?

    Hi Rc_Drifter,
    Welcome to the Support Communities!  The article below will help you troubleshoot the issue you are having with your iPod nano. Restoring the device may resolve the backlight issue as well.  
    iPod nano (6th generation): Hardware troubleshooting
    http://support.apple.com/kb/ts3474
    Display shows a white screen
    Try putting the iPod into disk mode:
    Reset the device (press the Sleep and Volume Down buttons simultaneously until the display turns black—about eight seconds).
    When the display turns black, hold down the Volume Down and Volume Up buttons simultaneously until the device enters Disk mode.
    While the device is in disk mode, sync it to iTunes and try to restore.
    I hope this information helps ....
    - Judy

  • My ipod nano 6 keeps turning off the music when i touch the sleep button

    Hi my Ipod nano 6th keeps turning off the music when I touch the sleep/wake button.
    What should I do?

    Your problem is that your iPod is not sensing that your headset is inserted. There is a pin inside the headphone port on the Nano that senses if it is inserted fully. If it does not sense anything, it will pause playback when the screen turns off to save battery power. Here are the solutions:
    Insert it fully. This will fix it for most of you. Press that thing in there all the way. You should feel and hear a full click when it is fully seated. If you can see ANY silver of the headset jack, it is not fully inserted.
    Debris inside the headset port. If you are totally unable to push the headset jack all the way, the most likely problem is that you have crud inside your headphone jack. Try blowing it out or slapping it against your palm with the headset port facing your palm to try and get the stuff out. If you look into he jack with a light, you should be able to see to the bottom. The entire inside of the headset port is white, so if it looks dark at the bottom, that is the crud that is keeping your nano from working.
    Headset jack or plug issue. If you cannot solve the problem with 1 or 2, then there is likely something physically wrong with either the headset jack on your headphones or the headset port on the nano.
    i

  • Macbook freezes or turns off when I try to open .ppt, .pptx, .pps files

    macbook freezes or turns off when I try to open .ppt, .pptx, .pps files

    Which model Macbook Pro do you have?  If you really have a Macbook, post in their forums.  Macbook Pro and a Macbook are 2 different type of computers.
    It is very difficult to offer troubleshooting suggestions when the "os version" you are using is unknown as each os has their own troubleshooting solutions. 
    Please describe in detail all you have attempted to do in order to resolve the issue. 
    Please complete or update your system profile so the users here can properly help you. 

  • My iPod Nano 2nd gen. has a black caterpillar-like shape on the screen when turned off. I recharged and reset. What else should I do?

    My iPod Nano 2nd gen. has a black caterpillar-like shape on the screen when turned off.
    It disappears when turned on. It must mean something. I recharged and reset. What else, if anything, should I do?

    You can work through the remaining five 5 R's of troubleshooting.
    http://www.apple.com/support/ipod/five_rs/
    It might also be a good idea to let the iPod's battery fully drain. Then charge it back up and restore it once more in iTunes.
    Otherwise, it's likely a hardware issue with the iPod's LCD display, meaning you'll need to take or send your iPod in for service either via Apple or a third party repair service. Here is Apple's repair pricing.
    http://www.apple.com/support/ipod/service/prices/
    Note that they don't actually repair the device, but exchange it for one of the same generation, model, and capacity.  A third party service will actually replace the damage part for a little less.  Google "iPod screen repair" and you should get a number of results to work with.
    B-rock

  • Hi, my ipod nano when turn off miss batt charg , plz help

       hi dear
      my ipod nano when turn off miss batt charg , plz help  me

    nastaranfromcrowley wrote:
    for example : my ipod have full charg , i turn off my ipod , after 3 days my ipod doesnt turn on , and show batt doesnt charg while i dont use it
    The iPod Nano battery will not charge unless you connect it to your computer, to an AC outlet with a wall adapter, a charging dock or an auto adapter/dock.
    You battery is always discharging when idle or shut off.  You should read the manual for your model iPod Nano regarding batteries - iPod Manuals
    iPod Models

  • How can I stop my iPhone 4 from freezing and turning off by itself?

    3 days ago, my phone started freezing very often. I would hold the sleep and home button for 6 seconds to restart it. After a while, it started turning off and on by itself. Just last night it had this lit up black screen. It was totally upresponsive and my iPhone did not show up in iTunes. I let the batter run out and than I charged it. It was fine for a couple of hours and than it started turning of and on by itself. It worsened to the point where right away when my iPhone 4 turned on, it turned off. Now it has a blue screen. Pressing the home and sleep button doesn't hel. It doesn't show up in iTunes either. Should I wait for it to run out of battery like last time? What can I do in the future to prevent my phone from freezing and turning off. Will upgrading it to the newest operating system help?  This phone is nearly a year and a half old. Please help.

    ArmanG wrote:
    Should I just let the energy run out and then plug it into iTunes and see what happens?
    Might be a better idea to try ALL of the Basic Troubleshooting steps as already mentioned to attempt to resolve the issue.

  • IPod nano 3rd gen turnes off and on by itself

    I have a problem: my iPod nano 3rd generation turns off and on by itself every 5-7 seconds.
    How can I solve this problem?

    Is there a case around this iPod? It might be pushing on the touch wheel. Does it happen when you flick the lock switch? If so it seems like a restore is in order
    Try the 5 r's http://www.apple.com/support/ipod/five_rs/nano3gen/

  • My ipod nano 2nd generation turn off by itself

    my ipod nano 2nd generation turn off by itself and when i unplug the USB cable and i plug it again its shows sign do not disconnect then its shows battery low and it turn off again i bought it since 2 and every time i go to the shop to repair it he told me that i don't have the parts to repair it please help any ideas ? thanks

    Try calling the apple customer service maybe they will hel you. 1-800-my-apple(this is the phone number) By the way this problem is very weird. You should call.

  • How do you make it not so sensitivity. when turned off set down it comes back on or when working out shirt brushes ipod and it changes music

    how do you make it not so sensitivity. when turned off set down it comes back on or when working out shirt brushes ipod and it changes music

    You didn't say which model of iPod Nano that you have, but generally there should be a lock setting, that can be turned on or off, to prevent accidental changes in settings. And, there is also a setting to turn on or off a feature called, "Shake to Shuffle." It allows you to change songs by just shaking the iPod.

  • IPhone 5 will not be recognized by iTunes or charge while on but when turned off the iPhone will charge just fine but still won't sync with iTunes what should I do?

    Was charging my iphone 5 for about an hour or so after charging unplugged and went to playing games phone was at 5% so I grabbed my cable and plugged it into the wall nothing happened tried three different chords and blocks and sockets afterwards I plugged my phone into the computer and it wouldn't charge or sync with iTunes it acted as if it wasn't even plugged in so I shut the phone off and though I'd give It a break and try again later. As I got ready to go to bed I though I'd try to plug it back in and see if anything happened nothing did so I just left it I went to mess with it this morning and come to find out it was at 100% I continued to mess with it and i came to the conclusion that it only charges when turned off. I can't get the phone to reset and would love to restore with iTunes if it would sync with iTunes I don't know what I need to do but really need my problem resolved since its a hassle to have to turn off my iphone in order to get it to charge

    Is that a new iPhone? Bring it in to Apple for a replacement.
    But do this first:
    hold the Home Button and the Power Button at the same time, keep holding, ignore everything on the screen, keep holding until you see the white Apple logo appear, then let go and let it start up.
    It should charge both when on and off, unless you connect throug a hub and there are current eaters also on the hub: connect directly to the usb port.

  • Should iphone 4 receive messages when turned off and display them when switched back on

    should iphone 4 receive messages when turned off and display them when switched back on

    It's up to the cellular carrier, but I believe most (if not all) will enqueue the messages when your iPhone is off.
    So generally speaking, a few minutes after you turn your iPhone on, your messages should display.  Similarly, your voicemails would arrive.

  • When turn off wi-fi, macbook pro stop responding

    installed maverics on my macbook pro 3,1. every time when turn off wi-fi manually, computer stop responding, it then has to be restarted by long press on the power botton. 

    Wanted the solution to work, but there's no option to Sync this iPod over Wi-Fi option on my Touch. 
    Settings > General > iTunes Wi-Fi Sync > Sync Now
    No option to uncheck to opt out of automatic syncing.  The auto syncing can only be stopped after it's started.
    Solution found by searching the web:
    iTunes menu > Preferences > Devices > Prevent iPods, iPhones, and iPads from syncing automatically.

Maybe you are looking for

  • Xmlns problem in XML manipulation

    Hi I notice that if a xml (element having xmlns), and each time you assign, append or replace the child element you will always get xmlns in your child. For ex <a xmlns="http://www.w3.org/1999/xhtml"> <b/> </a> new element: <c> test </c> Appending  

  • Service Tax not updating in Table J_1ISERVC

    Hi, When i do Service Tax scenario, I have done the process from Sale Order and billing and other things. postings are made correctly. But the service tax values are not updating in Table J_1ISERVC Because of this issues,we are not able to generate S

  • How to pre-populate fields for new entry in table maintenance

    Hey everyone, I have a table maintenance set up that I would like to pre-populate two date fields when the user creates a new entry or copies an existing entry. I can do this by adding a PBO module for the maintenance screen but then if the screens a

  • When i purchase os x mountain lion from the app store and install it will i keep all of my files and apps on my hard drive

    If i purchase mountain lion will it wipe my hard drive or will i keep all of my files and applications

  • Edge Detection

    I'm about to start working on an application that receives images from a wireless webcam (attached to a roving robot) and needs to process them to decide where the robot should travel to next. The processing needs to identify obstacles, walls, and do