Nano G6 needs reveiver plug-in for wearing polar wearlink+nike+?
Only what i want is to checking heart-rate while working out.
If i buy a "Polar WearlinkNike" transmitter for checking heart rate when workout at gym.
Do i also need to buy the receiver(of nike+ipod SportKit) to plug into the dock connector on iPod nano G6 or G5??
PS.
I don't want and it doesn't need the nike+apple wireless sensor(the red&white round-shape one) in my shoes. (i don't wear Nike at all)
You do need to plug in the receiver in the 6G Nano iPod to use the Polar Wearlink+.
I just bought the iPod Nano (6th G, touch nano) and I coupled the Polar HRM Wearlink + in the Nike+ iPod settings. It was actually a non brainer. Plug the receiver in, let the iPod link with the HRM, and done. Same with the sensor in my Nike+ shoe.
Both of them work. I'm so glad to have this come together. The Polar Wearlink+ is cheaper then buying the whole Polar package (with watch etc). Of course, the iPod costs you also 159€, but then you can beam your workouts to the Nike+ website, which is very nice to follow your workouts. When you did the workout, what you did at the moment (run your longest, run the most calories etc).
Now that I tested it just by walking around and have a little run for a few meters, I cannot wait to get it to work.
Similar Messages
-
Ipod nano 7g and Polar Wearlink+ Nike+ Heart rate receiver
Hello to everybody, I am struggling in finding information about the compability between Ipod nano 7g and Polar Wearlink+ Nike+ Heart rate receiver without using any additional receiver.
Documentation posted on Apple, Nike and Polar websites only mention ipod nano 6g.
Could you please shed some on this?
Many thanks.
FredIf it is compatible with Nike + it will work with the 7th Generation Nano.
-
I have a new computer and it has firefox on it of the 5.0 version and I went back to go download my movies from Blockbuster.com and I couldn't download them because I needed a IE plug-in for Firefox and the 5.0 does not work with it I need to go back and find if I can get a download of 4.0 version of firefox so I can get the IE plug-in for Firefox so I can download my movies.
- Try going to Setings>Store and sign out of the account and then sign back in.
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears -
Ipod Nano ipod needs to be reformatted for use with windows
I keep getting ipod needs to be feformatted for use with windows, how do i do this, I can't get it off.
On the PC, click here and follow the instructions.
(27135) -
I had to use the tamper data plug-in for my assignment in Software security course. The plug-in has installed correctly but it is not being displayed. Am I doing it any wrong or else is there a problem with the new firefox?
Have you been using the Tamper Data extension in an earlier version of Firefox?
Is the problem that there is no visible way to call up or configure Tamper Data? I don't use this extension myself, but generally speaking, you could check the following locations:
(1) Tools menu
To display the classic menu bar temporarily, tap the Alt key. To make it persistent, after tapping Alt, use View > Toolbars > Menu Bar
(2) Developer Tools menu - in case it now integrates here
* "3-bar" menu button > Developer
* menu bar: Tools > Web Developer
(3) Unused buttons - in case it has a button that just isn't on any toolbar
Use the Customize feature to check the available buttons and drag to the desired location. See: [[Customize Firefox controls, buttons and toolbars]].
Can you find a way to run it? -
I just purchased a new HP computer with windows 7. I installed 3.6. which I use as a default and had no trouble until I tried to listen to a webcast from the BMO metals and mining conference. When I clicked on listen to webcast I got a message tha tadditional plug ins were needed to display all the media on the page. I checked my system and was able to hear the test message, but I could not hear the actual webcast.
There was a box in the message saying click here to fins needed plug ins. When I clicked on it I got a screen saying no plug ins found. I have windows media player installed. There was a space to click on to test sound system, and I heard to message on the test, but when I tried to hear the actual webcast I got the same plug in needed message.
I then tried to listen on Chrome and got the same result. I tried to listen on Explorer and was able to hear the webcast and got no message about plug ins needed.
Is this just a case where they won't accommodate firefox, or is there a plug in or add on that I can install so I can use firefox.Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem.
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
It is hard to tell which plugin is needed to play that webcast. You appear to have Flash and WMP and Silverlight. Other popular but less used plugins are RealPlayer and QuickTime.
See:
* [[Popular plugins]]
* http://kb.mozillazine.org/Testing_plugins
You can check the page source to see which MIME type is specified for that content or post a link if that web page can be accessed publicly without authorization. -
Does Graphics2D need a plug in for viwing applets that use it?
Hi,
If an applet I write uses Graphics2D objects will people who view it on the internet need to download a plug-in to view the applet (as they do for applets using Swing)?
I am a novice so I would welcome any advice.
Thanks,
JohnYes. Graphics2D was added to the API in the java version 1.2, so you'll need the plugin just like with swing and the collection framework.
Note that people who use netscape 6 wont need the plugin :-) -
Need UK plug clip for Power Up adapter
I have a Nokia JBL Power Up speaker which comes with a 18v 2a power adapter. But I only have the adapter clip for the USA mains pins, and need one for the UK.
Does anyone know where I can obtain the UK pin adapter, or if anyone has one spare (e.g. non-UK users that got the UK pins with their adapter) could sell me it?
Many thanks!Seem to sell a lot of these: http://www.ebay.co.uk/itm/18V-Mains-AC-DC-Adaptor-Power-Supply-Charger-UK-Plug-JBL-Stage-Speaker-/11...
Happy to have helped forum in a small way with a Support Ratio = 37.0 -
Hi,
I am trying to do a very basic cross dissolve in final cut pro 10.1.3. One thing I have noticed is that al a lot of my icons in the transitions sections are black. Is this normal? I can' t find much on this. When I drag the transition onto the clip a message comes up saying, 'There is not enough extra media beyond clip egdes', It asks do I want to over lap to create the transition. I say 'Create Transition', but it doesn't. Any thoughts appreciated.Curiously, this picture I can see :-)
The dialog is quite normal. It just means what it says, namely, there is not enough extra media at the edges of the clips (so called "handles") to be used for the transition, so FCP X needs to shorten some of those clips to create the handles - thus the total length of your timeline will decrease.
But the fact that the transition appears as black in the browser, and that it is not applied, show that there is definitely something wrong.
Since these default transitions are installed as part of the application itself, I believe the best course of action is to delete FCP X (use FCS Remover to completely remove all traces of the application), and then install afresh from the purchases section of the App Store. -
Need a plug-in for CS5 Bridge (on Windows 7)
Hi. I have just replaced a dead hard drive and reinstalled CS5 from discs which went well until I tried to find the Bridge plug-in which reads camera/lens data and allows distortion corrections. Where can I find the right plug-in and how do I go about downloading and installing it? I shoot with a Canon 5D Mk II. Thank you.
You probably are referring to the Adobe Camera Raw (ACR) plug in. This should be automatically installed with your Photoshop CS5 version, it also works via bridge but still s a PS plug in. Be sure to have the latest updates for your PS version. You can open a Raw file in Bridge with the open command and this should open it in the ACR window using PS or use The Open in Camera Raw command to open in ACR hosted by Bridge.
On other files (jpeg and Tiff also can be opened in ACR) just open in PS and use the Filter Lens Correction.
Otherwise provide more details about versions and system. -
Avi file plug in for divx. what plug in do I need?.
I have no sound in avi files and get a message that I need a plug in for divx. what plug in do I need?.
I have both of these applications installed on my apple. Both the player and converter. I used MPEG Streamclip to convert a .mov file recorded on my iphone to an .avi file for playback on an internet website. After the file is converted there is no audio and I get an error message stating:
"You may need an additional video decoder to play this file.
This file contains a track in an unknown format (code ""). You may need to install a QuickTime™ component for this video format in order to play this file."
I purchased the pro version of divx to see if this addressed the issue but it did not. I'm concerned the pro version of flip 4 mac will be the same at $30.00 more dollars. Is MPEG Streamclip the problem? -
I have the Ipod Nano. I’m traveling to Australia which has the following current:240V AC, 50Hz. I have a travel plug adapter for the Australian electricsockets. Will I be able to use my Ipod charger with an Australian travel plugadapter or will I also need a voltage converter? Australia which has thefollowing current: 240V AC, 50Hz.
I have the Ipod Nano. I’m traveling to Australia which has the following current:240V AC, 50Hz. I have a travel plug adapter for the Australian electricsockets. Will I be able to use my Ipod charger with an Australian travel plugadapter or will I also need a voltage converter? Australia which has thefollowing current: 240V AC, 50Hz.
-
Cannot print adobe documents ... Error message indicates a need to install plug-in for adobe reader.
Please advise how/where to locate the required adobe reader plug-in...
Thank you,
Joe CurcioWhat is the full and exact message you are getting?
If the PDF contains Rich Media, the Flash Player plugin may be required: http://fpdownload.macromedia.com/pub/flashplayer/latest/help/install_flash_player.exe -
We are going o Great Britain this summer. Do we need voltage converters as well as plug adapters for our iPads (one is 2nd generation and one 4th)
No. Since Apple power converter work from 110 to 240 volts, no power converter is reguired.
You will need a pin adaprt. I have found my local Ace hardware store to have the best deal on them.
Allan -
I downloaded the 64 bit version of itunes and plugged in my ipod touch but a sign pops up and says i need the right software for the ipod to connect which is 64 bit. Does anyone know how to fix this problem?
Hi alexanderfrommilton,
First try reinstalling itunes.
Maybe you are looking for
-
CAnnot connect to wireless manager
Have attempted to connect to wireless amnager several times, enter "admin" as both login and pw but system keeps looping back to that same screen. Trying to connect blackberry with wireless capability to home system. Tried the button method but that
-
Hi Experts, Plz guide me which is the best third party tool for backup & recover of database in Oracle and where can i get the trail version of this tool. Thanx in Advance Mani
-
Hello, on my PC, when i sync, i upload paramters. on my mac, i download parameters, and then he ask me to reload app. But when i start up after again, nothing change. There is no sync whith new parameters. It's working with media enc, but not with af
-
Evolution: Z not usable in editor
Hi, when I'm writing a mail with evolution, a capital z does now up when I press Shift+z on my keyboard. Typing z in the to or subject-lines works without a problem. Character Encodig is set to UTF-8 in the editorsettings, I'm using XFCE with de_DE.U
-
IPhone isn't recognising Contacts when receiving phone calls!
Whenever someone tries to call me, even if they don't have a private number and are in my contacts, it is coming up as 'Unknown' caller. Please help!