Nano in Disc Mode!!??
Hey there,
I got my ipod a couple of weeks ago and all was fine till it wouldnt turn on yesterday. I reset the screen, with the menu and play button, the apple logo came up but then the screen display says "DISC MODE" and is in black and white. It is charging. but i cant acess music or use it. can someone tell me how to change it back????
Cheers,
k erm
Restore you ipod nano using the Ipod Updater this would have come on a cd with with the nano or download it from
http://www.apple.com/ipod/download/
good luck
Similar Messages
-
I went to charge my Ipod last night, and a couple hours later I wnet to check how it was doing and it said Disc Mode and fully Charged. After disconnecting I went to turn it off, and it wont do that but it will update! Can anyone help? I'm not sure what's wrong with it and it's barely 3 wks old
thanksWelcome to Apple Discussions, CherryPie!
Could you tell me if you have set your iPod Nano to 'Disk Mode' using the latest release of iTunes? If not, then this is your problem.
Regards,
Steve -
6th gen ipod nano has white screen and won't go into disc mode
My ipod nano has a white screen - it will play music, and it is recognized by itunes. It won't enter disc mode. I can't seem to find any other helpful steps to follow online other than put it into disc mode and restore it via itunes. When I attempt to put it into disc mode holding power/Vol down together the screen will turn back, but when I then hold down Vol down/Vol up together while the screen is dark it just goes back to white screen. I did plug it into the computer and restore it via itunes, and the screen is still white. Any ideas? Thanks!
Hi LizS5,
It sounds as if you have already done much of the troubleshooting suggested in this article, but I would suggest you work through it in order to get your iPod nano back up and running -
iPod nano (6th generation): Hardware troubleshooting
http://support.apple.com/kb/TS3474
Specifically -
Try putting the iPod into disk mode:
Reset the device (press the Sleep and Volume Down buttons simultaneously until the display turns black—about eight seconds).
When the display turns black, hold down the Volume Down and Volume Up buttons simultaneously until the device enters Disk mode.
While the device is in disk mode, sync it to iTunes and try to restore.
And if the issue is not resolved -
My issue is still not resolved. What do I do next?
For information on servicing your iPod, go to the iPod Service FAQ
Thanks for using Apple Support Communities.
Best,
Brett L -
I have a 1st gen Nano that went into disc mode about a week ago. I reset it and reloaded it and it was fine until this morning. It went back in disc mode. Is this an indication that it is failing, or is there something I can do to prevent this from happening again?
Thanks!
Dave
Message was edited by: Dave5287What's the average play time everyone experiences??
After I use it for about 2 hours (starting with it
fully charged), it stops... says there's no more
charge left. Is this normal, or is my Nano just
getting old?? I need it to go longer for my
workouts..
NOT normal, but your 1st Gen nano IS getting older/
Any advice?
Turn off alarms. Set equalizer to OFF...
Do the new ones have a longer battery life?
Yes... they're spec'd at up to 24hours of music play as opposed to the 14hours of the 1st Gen nano. -
All tips and tricks state that an Option to Enable Disc Mode should be visible, but I am not seeing that. And other tips / tricks to push power / home buttons on ipod to enter diagnostic mode / disc mode (?) are only putting me in Recovery Mode.
Please advise on How to put ipod 3g touch into Disc Mode.See:
Putting iPod into Disk Mode
ot includes:
* This article applies only to iPod models with a Click Wheel or scroll wheel and to iPod nano (6th generation). Disk Mode is not supported on iOS devices. You can use File Sharing with supported apps to transfer files to an iOS device. -
I need to back up files off of my laptop (windows XP) which does not have iTunes on it (work laptop, no admin privledges). Can I use my Nano (2gen) in disc mode to move the files and then replace once I get the laptop back from IT?
They recommended burning CD's but honestly, this way makes more sense.If your iPod is formatted for Mac it won't run natively on a PC because Windows operating systems don't recognize Mac OS-formatted disks (HFS or HFS Plus formats). There are third party programs that will allow you to use a Mac formatted iPod on Windows. XPlay and MacDrive for instance get good reviews. XPlay is an iPod specific program and can be used as an iTunes alternative, MacDrive is more general and lets you access various types of Mac formatted drives on Windows such as CDs, DVDs, hard drives etc:
XPlay 2
MacDrive
If your iPod is formatted for Windows then you just need to enable it for disk use:
Using your iPod as a storage drive
How to determine your iPod's disk format -
Sad icon = computer does not detect = cannot put into disc mode !
hey,
my ipod photo at the moment won't turn on. the best i can do is plug it in to either my pc or the electricity supply, or reset it, so the apple logo comes up, however it only lasts for a few seconds and the sad face icon appears, directing you to www.apple.com/support.
i tried the first 4 r's and got onto the restoring one. but the updater will not detect the ipod. i think it is because my ipod is not in disc mode, but i cannot put it into disc mode - i can do the first step and resetting it, but then when i click the play/pause button and the select button nothing happens.
this problem has severly cheesed me off, and am very desperate to have a working ipod again!!!! please please help if you can!!!!
thanks a lot, leonHello,
If a sad iPod icon or an exclamation point and folder icon appears on your iPod’s screen, or with sounds of clicking or HD whirring, it is usually the sign of a hard drive problem and you have the power to do something about it now. Your silver bullet of resolving your iPod issue – is to restore your iPod to factory settings.
http://docs.info.apple.com/article.html?artnum=60983
If you're having trouble, try these steps at different levels one at a time until the issue is resolved. These steps will often whip your iPod back into shape.
Make sure you do all the following “TRYs”
A. Try to wait 30 minutes while iPod is charging.
B. Try another FireWire or USB through Dock Connector cable.
C. Try another FireWire or USB port on your computer .
D. Try to disconnect all devices from your computer's FireWire and USB ports.
E. Try to download and install the latest version of iPod software and iTunes
http://www.apple.com/ipod/download/
http://www.apple.com/itunes/download/
F. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
http://www.apple.com/support/ipod/five_rs/
G. Try to put the iPod into Disk Mode if it fails to appear on the desktop
http://docs.info.apple.com/article.html?artnum=93651
If none of these steps address the issue, you may need to go to Intermediate level listed below in logical order. Check from the top of the lists to see if that is what keeping iPod from appearing on your computer in order for doing the Restore.
Intermediate Level
A. Try to connect your iPod with another computer with the iPod updater pre-installed.
B. Still can’t see your iPod, put it in Disk Mode and connect with a computer, instead of doing a Restore on iPod Updater. Go and format the iPod instead.
For Mac computer
1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
5. Eject your iPod and do a Reset
6. Open the iPod Updater and click “Restore”
For Window computer
Go to folder “My Computer”
Hope you can see your iPod there and right click on the iPod
Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
Now select “Format”
Eject your iPod and do a Reset
Open the iPod Updater and click “Restore”
In case you do not manage to do a “Format” on a window computer, try to use some 3rd party disk utility software, e.g.“Partition Magic”.
C. Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
Tips
a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iPod updater.
b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
http://discussions.apple.com/thread.jspa?messageID=2364921�
Advance Level
A. Diagnostic mode solution
If you have tried trouble shooting your iPod to no avail after all the steps above, chances are your iPod has a hardware problem. The iPod's built-in Diagnostic Mode is a quick and easy way to determine if you have a "bad" iPod.
You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.
Press and hold the following combination of buttons simultaneously for approximately 10 seconds to reset the iPod.
iPod 1G to 3G: "Menu" and "Play/Pause"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select"
The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:
iPod 1G to 3G: "REW", "FFW" and "Select"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Back" and "Select"
You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode. Navigate the list of tests using "REW" and "FFW". The scroll wheel will not function while in diagnostic mode. For further details on Diagnostic mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/
Try to do the 5in1, HDD R/W and HDD scan tests. Some successful cases have been reported after the running the few tests under the Diagnostic mode. In case it does not work in your case, and the scan tests reports show some errors then it proves your iPod has a hardware problem and it needs a repairing service.
B. Format your iPod with a start disk
I have not tried this solution myself, I heard that there were few successful cases that the users managed to get their iPod (you must put your iPod in disk mode before connecting with a computer) mounted by the computer, which was booted by a system startup disk. For Mac, you can use the Disk Utility (on the Tiger OS system disk), for PC user, you can use the window OS system disk. Try to find a way to reformat your iPod, again it does not matter which format (FAT32, NTFS or HFS+) you choose, the key is to erase the corrupted system files on the iPod. Then eject your iPod and do a Reset to switch out from Disk Mode. Reboot your computer at the normal way, connect your iPod back with it, open the iPod updater, and hopefully your iPod will appear there for the Restore.
If none of these steps address the issue, your iPod may need to be repaired.
Consider setting up a mail-in repair for your iPod http://depot.info.apple.com/ipod/
Or visit your local Apple Retail Store http://www.apple.com/retail/
In case your iPod is no longer covered by the warranty and you want to find a second repairing company, you can try iPodResQ at your own risk
http://www.ipodresq.com/index.php
Just in case that you are at the following situation
Your iPod warranty is expired
You don’t want to pay any service charges
You are prepared to buy a new one
You can’t accept the re-sell value of your broken iPod
Rather than leave your iPod as paper-weight or throw it away.
You can try the following, but again, only do it as your last resort and at your own risk.
Warning ! – It may or may not manage to solve your problem, and with a risk that you may further damage your iPod, which end up as an expensive paper weight or you need to pay more higher repairing cost. Therefore, please re-consider again whether you want to try the next level
Last Resort Level
1. . Disconnecting the Hard Drive and battery inside the iPod – Warning !! Your iPod warranty will be waived once you open the iPod.
In Hong Kong there are some electronic shops offering an iPod service for Sad iPod, the first thing they do is to open up the iPod’s case and disconnecting the battery and the Hard Drive from the main board of the iPod. Wait for 5-10 minutes and reconnecting them back. The reason behind which I can think of is to do a fully reset of a processor of the iPod. In case you want do it itself and you believe that you are good on fixing the electronics devices and have experience to deal with small bits of electronic parts, then you can read the following of how to open the iPod case for battery and HDD replacement (with Quicktimes)
http://eshop.macsales.com/tech_center/index.cfm?page=Video/directory.html
2.Press the reset button on the Hard Drive inside the iPod – Suggestion from Kill8joy
http://discussions.apple.com/thread.jspa?messageID=2438774#2438774
Have I tried these myself? No, I am afraid to do it myself as I am squeamish about tinkering inside electronic devices, I have few experiences that either I broke the parts (which are normally tiny or fragile) or failed to put the parts back to the main case. Therefore, I agree with suggestion to have it fixed by a Pro.
2. Do a search on Google and some topics on this discussion forum about “Sad iPod”
What should I do with my iPod? Send it or keep it?
http://discussions.apple.com/thread.jspa?threadID=469080&tstart=0
Strange error on iPod (probably death)
http://discussions.apple.com/thread.jspa?threadID=435160&start=0&tstart=0
Sad Face on iPod for no apparent reason
http://discussions.apple.com/thread.jspa?threadID=336342&start=0&tstart=0
Meeting the Sad iPod icon
http://askpang.typepad.com/relevanthistory/2004/11/meeting_thesad.html#comment-10519524
Sad faced iPod, but my computer won’t recognize it?
http://discussions.apple.com/thread.jspa?messageID=2236095#2236095
iPod Photo: unhappy icon + warranty question
http://discussions.apple.com/thread.jspa?messageID=2233746#2233746
4th Gen iPod Users - are we all having the same problem?
http://discussions.apple.com/message.jspa?messageID=2235623#2235623
Low Battery, and clicking sounds
http://discussions.apple.com/thread.jspa?messageID=2237714#2237714
Sad faced iPod, but my computer won’t recognize it
http://discussions.apple.com/thread.jspa?messageID=2242018#2242018
Sad iPod solution
http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
Re: try to restore ipod and it says "can't mount ipod"
http://discussions.apple.com/thread.jspa?threadID=443659&tstart=30
iPod making clicking noise and is frozen
http://discussions.apple.com/thread.jspa?messageID=2420150#2420150
I am not suggesting that you should follow as well, but just read them as your reference. You are the person to make the call. -
Enable disc mode in itunes yet itunes doesnt register ipod
hi
i need to enable disc mode in itunes, i have managed to manually do this on my ipod (hold down menu and middle button, then hold down middle and play/pause button) however i need to do this on my itunes, except my itunes doesnt register my ipod, so i cannot click on my ipod in the source list the go to preferences to select disc mode.
Is there any other way i can do this?
Thank you very much in advance for your help!See:
Putting iPod into Disk Mode
ot includes:
* This article applies only to iPod models with a Click Wheel or scroll wheel and to iPod nano (6th generation). Disk Mode is not supported on iOS devices. You can use File Sharing with supported apps to transfer files to an iOS device. -
Making weird noise and won't go into disc mode and all kinds of icons
after having many problems, i managed to get my ipod into disc mode and format it. However, i'm still having similar problems. When i turn it on, it goes on normally but when i connect it to my computer it freezes it. When i try to restart the ipod while connected to the computer, i get the battery is discharged icon, or sometimes the sick icon first and then the discharged icon, and i'm not able to put it into disc mode. After i get the icons, the only way i can get it to start again is to toggle the hold switch many times (took me awhile to figure this out..). Also, the ipod makes a weird repeated disc noise sometimes when its connected or if i'm starting it. If i try to restart the ipod without it being connected to the computer, i get the sick icon until i toggle the hold switch. can anybody help? thanks!
actually, i've managed to get it into disc mode, but it just makes the repeated weird noise nonstop and it doesn't let me open any programs on my computer so i can't format it.Hello,
If a sad iPod icon or an exclamation point and folder icon appears on your iPod’s screen, or with sounds of clicking or HD whirring, it is usually the sign of a hard drive problem and you have the power to do something about it now. Your silver bullet of resolving your iPod issue – is to restore your iPod to factory settings.
http://docs.info.apple.com/article.html?artnum=60983
If you're having trouble, try these steps at different levels one at a time until the issue is resolved. These steps will often whip your iPod back into shape.
Make sure you do all the following “TRYs”
A. Try to wait 30 minutes while iPod is charging.
B. Try another FireWire or USB through Dock Connector cable.
C. Try another FireWire or USB port on your computer .
D. Try to disconnect all devices from your computer's FireWire and USB ports.
E. Try to download and install the latest version of iPod software and iTunes
http://www.apple.com/ipod/download/
http://www.apple.com/itunes/download/
F. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
http://www.apple.com/support/ipod/five_rs/
G. Try to put the iPod into Disk Mode if it fails to appear on the desktop
http://docs.info.apple.com/article.html?artnum=93651
If none of these steps address the issue, you may need to go to Intermediate level listed below in logical order. Check from the top of the lists to see if that is what keeping iPod from appearing on your computer in order for doing the Restore.
Intermediate Level
A. Try to connect your iPod with another computer with the iPod updater pre-installed.
B. Still can’t see your iPod, put it in Disk Mode and connect with a computer, instead of doing a Restore on iPod Updater. Go and format the iPod instead.
For Mac computer
1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
5. Eject your iPod and do a Reset
6. Open the iPod Updater and click “Restore”
For Window computer
Go to folder “My Computer”
Hope you can see your iPod there and right click on the iPod
Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
Now select “Format”
Eject your iPod and do a Reset
Open the iPod Updater and click “Restore”
In case you do not manage to do a “Format” on a window computer, try to use some 3rd party disk utility software, e.g.“Partition Magic”.
C. Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
Tips
a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iPod updater.
b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
http://discussions.apple.com/thread.jspa?messageID=2364921�
Advance Level
A. Diagnostic mode solution
If you have tried trouble shooting your iPod to no avail after all the steps above, chances are your iPod has a hardware problem. The iPod's built-in Diagnostic Mode is a quick and easy way to determine if you have a "bad" iPod.
You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.
Press and hold the following combination of buttons simultaneously for approximately 10 seconds to reset the iPod.
iPod 1G to 3G: "Menu" and "Play/Pause"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select"
The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:
iPod 1G to 3G: "REW", "FFW" and "Select"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Back" and "Select"
You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode. Navigate the list of tests using "REW" and "FFW". The scroll wheel will not function while in diagnostic mode. For further details on Diagnostic mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/
Try to do the 5in1, HDD R/W and HDD scan tests. Some successful cases have been reported after the running the few tests under the Diagnostic mode. In case it does not work in your case, and the scan tests reports show some errors then it proves your iPod has a hardware problem and it needs a repairing service.
B. Format your iPod with a start disk
I have not tried this solution myself, I heard that there were few successful cases that the users managed to get their iPod (you must put your iPod in disk mode before connecting with a computer) mounted by the computer, which was booted by a system startup disk. For Mac, you can use the Disk Utility (on the Tiger OS system disk), for PC user, you can use the window OS system disk. Try to find a way to reformat your iPod, again it does not matter which format (FAT32, NTFS or HFS+) you choose, the key is to erase the corrupted system files on the iPod. Then eject your iPod and do a Reset to switch out from Disk Mode. Reboot your computer at the normal way, connect your iPod back with it, open the iPod updater, and hopefully your iPod will appear there for the Restore.
If none of these steps address the issue, your iPod may need to be repaired.
Consider setting up a mail-in repair for your iPod http://depot.info.apple.com/ipod/
Or visit your local Apple Retail Store http://www.apple.com/retail/
In case your iPod is no longer covered by the warranty and you want to find a second repairing company, you can try iPodResQ at your own risk
http://www.ipodresq.com/index.php
Just in case that you are at the following situation
Your iPod warranty is expired
You don’t want to pay any service charges
You are prepared to buy a new one
You can’t accept the re-sell value of your broken iPod
Rather than leave your iPod as paper-weight or throw it away.
You can try the following, but again, only do it as your last resort and at your own risk.
Warning ! – It may or may not manage to solve your problem, and with a risk that you may further damage your iPod, which end up as an expensive paper weight or you need to pay more higher repairing cost. Therefore, please re-consider again whether you want to try the next level
Last Resort Level
1. . Disconnecting the Hard Drive and battery inside the iPod – Warning !! Your iPod warranty will be waived once you open the iPod.
In Hong Kong there are some electronic shops offering an iPod service for Sad iPod, the first thing they do is to open up the iPod’s case and disconnecting the battery and the Hard Drive from the main board of the iPod. Wait for 5-10 minutes and reconnecting them back. The reason behind which I can think of is to do a fully reset of a processor of the iPod. In case you want do it itself and you believe that you are good on fixing the electronics devices and have experience to deal with small bits of electronic parts, then you can read the following of how to open the iPod case for battery and HDD replacement (with Quicktimes)
http://eshop.macsales.com/tech_center/index.cfm?page=Video/directory.html
2.Press the reset button on the Hard Drive inside the iPod – Suggestion from Kill8joy
http://discussions.apple.com/thread.jspa?messageID=2438774#2438774
Have I tried these myself? No, I am afraid to do it myself as I am squeamish about tinkering inside electronic devices, I have few experiences that either I broke the parts (which are normally tiny or fragile) or failed to put the parts back to the main case. Therefore, I agree with suggestion to have it fixed by a Pro.
2. Do a search on Google and some topics on this discussion forum about “Sad iPod”
What should I do with my iPod? Send it or keep it?
http://discussions.apple.com/thread.jspa?threadID=469080&tstart=0
Strange error on iPod (probably death)
http://discussions.apple.com/thread.jspa?threadID=435160&start=0&tstart=0
Sad Face on iPod for no apparent reason
http://discussions.apple.com/thread.jspa?threadID=336342&start=0&tstart=0
Meeting the Sad iPod icon
http://askpang.typepad.com/relevanthistory/2004/11/meeting_thesad.html#comment-10519524
Sad faced iPod, but my computer won’t recognize it?
http://discussions.apple.com/thread.jspa?messageID=2236095#2236095
iPod Photo: unhappy icon + warranty question
http://discussions.apple.com/thread.jspa?messageID=2233746#2233746
4th Gen iPod Users - are we all having the same problem?
http://discussions.apple.com/message.jspa?messageID=2235623#2235623
Low Battery, and clicking sounds
http://discussions.apple.com/thread.jspa?messageID=2237714#2237714
Sad faced iPod, but my computer won’t recognize it
http://discussions.apple.com/thread.jspa?messageID=2242018#2242018
Sad iPod solution
http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
Re: try to restore ipod and it says "can't mount ipod"
http://discussions.apple.com/thread.jspa?threadID=443659&tstart=30
iPod making clicking noise and is frozen
http://discussions.apple.com/thread.jspa?messageID=2420150#2420150
I am not suggesting that you should follow as well, but just read them as your reference. You are the person to make the call. -
Using thunderbolt to firewire adapter for target disc mode
I need to transfer several GB of data from a 2011 iMac running OS 10.6 to a new Mac Mini running OS 10.9. Can I connect the older iMac to the newer Mini with a Thunderbolt to Firewire adapter and boot the iMac into Target Disc Mode and transfer the data to the new Mac Mini? I've used TDM with two Firewire machines, but not with a newer Thunderbolt to Firewire Machine using an adapter.
Thanks for any input.
--SLHi Salnews,
I've done quite a bit of research on this, as this is what I plan to do (only from a MBP on 10.9, but I don't think your situation would be any different) and everything I've read says the answer is yes.
EDIT: I see you're on 10.6.7. You should update to 10.6.8 first. -
My iPod Classic 160 is in disc mode. I responds to nothing. iTunes doesn't recognize it. It doesn't sync. I've tried to restore and got error 1429. Now it just stays in disc mode and won't turn off. I'm keeping it connected to the charger so it doesn't go dead. Is there anything I can do to resurrect my pod?
To get out of disk mode do a iPod Hard Reset.
Toggle the Hold switch till you dont see the red mark.
Press Menu and Center buttons simultaneously for about 10 secs till the Apple logo comes ON then release the buttons
Select your preferred language.
See this Apple support Article on the 5Rs.
http://www.apple.com/support/ipod/five_rs/classic/
If you try to restore and get a1429 error message, read this Apple Support Article
http://support.apple.com/kb/TS1372
Good Luck! -
Can I connect a macbook pro and an ibook g4 via ethernet with ibook in target disc mode?
Well, that's the question, really. I just bought a refurb macbook pro as an upgrade for my sister's elderly ibook - which has been a great computer, but which can't run any system newer than Tiger, and which has an extremely crowded hard drive. We began setting up the new computer last night, and got to where we were instructed to use migration assitant to transfer files from the old machine. This is where things fell apart.
1. Although both machines were on my sister's wireless network, the macbook pro did not see the ibook.
2. When we tried to connect the machines via firewire, we had a new problem - our particular macbook pro does not have a firewire 400 port. Same problem when we thought of connecting my sister's extermal verbatim drive. The macbook pro recognized the drive when we connected via USB, but, after asking if we wanted to use Verbatim for Time Machine, it didn't seem to see it when we answered "Not now".
I have ordered an adapter for our firewire cable, but, in the meantime, I have an ethernet cable at home which I used to transfer data from my older iMac G3 to an eMac. Can I use this cable while putting my sister's ibook into target disc mode, or must I wait for the connector? It is VERY frustrating having such a hard time moving information from one Mac to another. I've been a Mac fan (and evangelist) for years because Macs are generally easy and reliable. But now we're stuck.
I've been reading the boards and understand that target disc mode is the way to go, since we can't use migration assitant to move files between an Intel machine and a PPC. The new macbook pro is running Lion, while the old iBook is running Tiger 10.4.11. Neither of us has any experience with Lion, though we've both used Macs for many years.
TIA!Thanks, Niel! As it turned out, I had a LaCie rugged drive at my place which had both Firewire 400 and Firewire 800 connections and cables. So I hooked it up to the old iBook, pulled my sister's stuff onto it as instructed in the ppc to intel thread, and then hooked it up to the Macbook Pro. Problem solved! - almost. We did have two issues:
1. My sister has a lot of music - more than 12 gigs were on the iBook's hard drive, but only about 6 made it onto the Macbook Pro. Why is that? I also got a message, when I was trying to move the music folder from the old library onto the new one, that OS X needed this folder and it couldn't be modified. Again, why is that? How, then, do you move files from a PPC to a machine running Lion? Again, a lot of her music files did make it over, but not all of them.
2. All her photos did seem to come over - in duplicate, maybe even in triplicate. That is so annoying! The same thing happened to me when I was migrating between my old eMac G4 and my iMac G5. Why on earth does iPhoto do this, and how can we make it stop?!
But we did manage to get a lot of her stuff onto the new machine. When we get the adapter, she'll be able to add the files that are on the Verbatim drive. You've been very helpful! -
After OS Upgrade, Computer will No Longer Boot from Disc, Enter T-Disc Mode
I purchased the Leopard update about a week ago and proceeded to install it (upgrade option) on my MacBook Pro previously running Tiger. After this update, I no longer seem to be able to boot from a disc(c on startup), enter target disc mode(t on startup), enter single user mode(command s on startup), basically anything that requires hitting a key on boot. In short, the operating system seems to override any of those commands and just loads regardless of what I press.
How can I fix this?? I fear that if my mac suddenly dies, I won't be able to fix it with archive and install via the CD, since I can't boot from it. I also won't be able to recover my files with target disc mode or anything.
For more in-depth details:
-My hard drive does have an open firmware password- it was recommended as part of the undercover anti-theft program that I use. Although I can tell putting the password on was a mistake, since I've read that single user mode is no longer accessible with this password active. I don't think this is affecting my inability to boot from disc or target disc mode though, as I was always able to do this with Tiger, even with the firmware password active.
-I have tried booting from other discs, like my old tiger OS disc that came with the laptop- that fails too.
-My Leopard installation was not clean. Like many others, I used the upgrade option and it appeared to work ok- until restart, where I was faced with the blue screen. Since I was unable to boot to single user mode and try removing potential APE files, I let the computer sit for an hour on the blue screen until it finally loaded. Upon getting in, I found that I did not even have APE's installed. I proceeded to reinstall the operating system via an Archive & Install. Upon boot after this reinstall, I still received a blue screen that lasted a long time, and the OS loaded very slow. It did this for a few additional boots afterwards, and has appeared to smooth itself out now, a week later. The OS now loads fine and works alright (from what I can see), but I still can not boot from disc or anything else.
If anyone at all knows a solution for this, it would be much appreciated. I wanted to suspect something like the disc drive going bad, but being that things like the target-disc mode aren't working either- I'm hesitant to believe its just the disc drive. Being that it also happened just as I upgraded to Leopard and faced issues, I have more of a hunch that its something to do with Leopard.
I apologize if this has been answered before, but I've looked all over the site, google, everywhere I could think of and came up with no answer.
Thanks ~BrianHi, I have been having the exact same problem with a late 2011 MBP 15 inch. I replaced the hard drive with a samsung SSD 1.5 years ago, along with a samsung SSD in the optical drive. It worked great until the Yosemite upgrade. The MBP seemed to work reasonably well for a few days after the upgrade, but then it started stalling on various programs (spinning beach ball on Mail, Safari, etc). Start-ups were also longer and had a loading bar each time, which was new since the upgrade. I left the MBP to sleep last night and when opening it, it crashed and tried to restart. On restart it loads to the login screen, then after I enter the password it partially loads (based on the loading bar), then shuts off. I removed the SSD and plugged it in with a USG, but that didn't change anything. Here is a picture after using CMD-V before it shuts off.
-
I have an unknown error (1621) and my iPod is not being recognised in iTunes or the Finder, even in Disc mode. Anyone know what's going on?
Try and force iPod into Recovery Mode:
1. Turn off iPad
2. Connect USB cable to computer; leave the other end alone
3. Press and hold the Home button down and connect the docking end of cable to iPad
4. Continue holding the Home button until you see the "Connect To iTune" screen
5. Release the Home button
6. Open iTune
7. You should see "iTunes has detected an iPad in recovery mode"
8. Use iTune to restore iPod
Note: You need to be patient and repeat the above many times to recover your iPad -
ITunes 7.0 ONLY recognizes nano in disk mode
Hi All,
This little problem of mine has been driving me nuts for the past 2 days.
I recently got an ipod nano as a gift (not the second gen) and wanted to try it out. So I installed the latest iTunes 7.0 (and rebooted...), charged the nano to full battery, then plugged it in. The nano shows "do not disconnect," and Windows shows the drive in My Computer and I can navigate inside the few folders it has. When I open up iTunes though, I don't see the nano no matter how long I wait. Doing a hard reset of the nano (action + menu) doesn't help. However, when I put the nano into disk mode (action + play) and reconnect to the computer, iTunes magically recognizes it, lets me name it, and even lets me sync my music. I can't directly drop the music in the nano for some reason (there's a lock icon next to the disk space indicator).
I updated the nano the latest version through iTunes and even tried doing a complete factory reset. None of this gets iTunes to recongize my nano unless it's in disk mode. I have a 5G video iPod that I had filled on another windows machine, so I connected it using the same cable/computer/itunes combination, and that gets recognized no problem.
Has anyone had the same experience and perhaps found a solution to this?
Thank you
nano 2gb Windows XP ProI am having a similar problem. New Nano.. won't allow me to play mp4 so I tried to restore. It won't restore and then doesn't recognize.
I love how I have a 30g Video, Shuffle, and Nano, but I can't play my hundreds of dollars of itunes music on my nano to run. Someone needs to make a commercial making fun of itunes.
Maybe you are looking for
-
My yahoo mail will not work on my iMac or iPad...is there a problem with yahoo today?
Was working fine until last night...can't check yahoo mail through my computer's mailbox.
-
Artwork issues in iTunes 10.5.2
It's not a great issue, but after updating itunes, the artwork from my ipod classic no longer displays in the "selected item" window of itnues. It is still associated with the songs on the ipod because if I go into "get info" the artwork is present.
-
Don't have a server in SOA servers list when trying to deploy app
Hi, I am on JDev 11.1.1.6, MDS created in 11.2.0 server. Trying to deploy a simple test composite into the app server installed with JDeveloper. I don't see any 'SOA servers' in the list. Admin server is up and running, so is the managed one, node ma
-
Help I downloaded a game that need to pay, but after that when i want to update or download a free game from app. It opens the pilling page again, and can't download or update anything any more, why this happen?
-
Customer pricing procedure table
Hie can you please let me know customer pricing procedure table for sales document? I want to know the customer pricing procedure assugned to Sales document in table level. thanks and regards, Marry. Edited by: marrysap on Jun 7, 2011 4:23 PM