Nano intermittently not showing up in iTunes with 12:00 AM Time in Title

After I updated my 2GB Nano with Updater 2006-01-10 from my eMac running MacOS 10.3.9 and iTunes 6.0.2 using USB, it ran for a while, but then it got hung and I had to restore it. Since then, it is intermittently not showing up in iTunes or on the desktop when I plug it in, even though the iPod shows the do not disconnect message. I have enabled the "Time in Title" setting to display the time in the title bar and when the iPod does not appear on the desktop, the time displayed is 12:00 AM. The iPod is not in disk mode.
Does anyone else see this problem?
eMac   Mac OS X (10.3.9)   iPod Nano 2GB Version 1.1

From iPod doesn't appear in iTunes or on the Mac desktop:
"Your iPod has a faulty port
Make sure that nothing is in or blocking the Dock Connector or FireWire port on your iPod.
Check the connection to make sure the Dock Connector or FireWire cable is completely plugged in."
Since the Nano is USB-only, I am not sure that this applies, but there was a piece of fuzz in the Nano's port for the USB cable. It has been removed. Now I will wait and see if the intermittent problem with the Nano not appearing in iTunes goes away.
eMac   Mac OS X (10.3.9)   iPod Nano 2GB Version 1.1

Similar Messages

  • My ipod nano is not showing up in iTunes or on my Mac

    My ipod nano is not showing up in iTunes or on my Mac
    sprinklsgirl

    this document is a good place to start with those issues:
    iPod missing in iTunes and Mac desktop
    but if you get no joy with that, try reposting in the "iPod nano" forums. here's a link through to those forums:
    iPod nano

  • Ipod Nano does not show up in Itunes

    Cannot transfer songs to Ipod Nano.  Under devices it does not show up in itunes.  Also I cannot back up either.  The only thing that shows up under devices
    is Sharing.  It is showing up on My computer.  How can I fix this.

    Hi there Ireneclover,
    You may find the troubleshooting steps in the article below helpful.
    iPod: Appears in Windows but not in iTunes
    http://support.apple.com/kb/ts1363
    -Griff W. 

  • A tip for when your 3Gen Nano does not show up in iTunes:

    This was happening to me, running 10.4.10 on both my old G3 iMac and my iBook, both with iTunes 7.5. I could not figure it out. Turns out, probably like many people, we have about 7 iPod cables lying around the house. I had picked a Firewire cable... everything was back to normal when I used the USB cable! (Although on the iMac it says synching will be slow because it's USB 1, the iBook with USB 2 is faster). Phew!

    Cable works fine on my other iPod. Reset by pressing menu and center button together for 6-10 seconds. Left it to charge for many hours. Started acting up while running. Suddenly the music stopped playing but my Nike + was still working for the rest of my run. Took it straight it home and plugged it in to the wall to recharge since the battery was fairly low. Looked like it recharged ok but then screen went blank and now does it not show up on iTunes, does not seem to recharge by the wall charger (apple wall charger plugged into a surge protector in India). I have turned the hold switch off and on many times.
    Sounds like a repair issue, which is not easy to do in India :(

  • No Nano - does not show up in ITunes or MY Computer

    I'm new to the IPOD and have had the Nano 1 week of which I spent 6 days trying to figure out why it wouldn't show up in ITunes.
    Solution - Eliminated extra drive assignments. I had used all the drive letter assignments from E: up to T: and had to remove the E: assignment so the Nano could use it.
    More info - The first time I plugged the Nano in it worked great. I loaded music onto it that I had previously stored and was able to listen and play it.
    So I decided to add more music from my CD collection.
    I removed the 3.5" floppy drive from the laptop and inserted the CD reader.
    !! That was the critical change because now the CD reader became D: drive which the Ipod had been using previously (I'm assuming, I never actually checked until it wouldn't work).
    After that I spent days trying to figure out why the Nano would no longer show up in ITunes. See details below:
    What I've Tried:
    1st Use:
    Windows XP 2002 SP1
    Had Itunes already on PC
    Charged Nano for a few hours until battery indicated full charge
    Plugged in 1st time, loaded Nano with tunes, no issues.
    Played music for awhile
    2nd Use:
    Swapped 3.5" Floppy drive for CD ROM drive
    Added more music from CD's
    Plugged in Nano
    ITunes opens up automatically
    Nano not shown in ITunes
    Nano not shown on My Computer
    Checked USB H/W configuration - shows IPOD connected
    Nano is charging, indicates "Do Not Disconnect"
    Disconnect Nano
    Shut down, Restart PC
    Reconnect Nano
    No change - no Nano
    Swapped USB Ports, no change - no Nano
    Disconnect Nano
    Reset Nano
    Reconnect Nano
    No change - no Nano
    Disconnect Nano
    Remove Itunes
    Reload Itunes from CD-ROM,
    Connect Nano when prompted by installation program but apparently doesn't recognize Nano is connected
    Installation gets stuck (45+ min) trying to "Format" Nano (Nano doesn't respond)
    Skip to next part of installation
    Shutdown, Restart PC
    Reconnect Nano
    No change - no Nano
    Disconnect Nano
    Remove Itunes
    Reload Itunes from CD-ROM
    Installation gets stuck again trying to "Format" Nano (Nano doesn't respond)
    Skip to next part of installation
    Set USB Drivers configuration to not disable power to USB port
    Shutdown, Restart PC
    Reconnect Nano
    No change - no Nano
    Shutdown, Restart PC
    Remove Itunes
    Shutdown, Restart PC
    Reload Itunes from CD-ROM
    Skip connecting Nano as part of installation
    Shutdown, Restart PC
    Run Ipod Updater 2005-09-06 program before plugging in Nano
    Connect Nano
    Restore software on Nano
    Nano Restores itself
    Nano indicates "Do not Disconnnect"
    ITunes opens up automatically
    Nano still not shown in ITunes
    Nano still not shown in My Computer
    Checked System\hardware\device manager\USB Mass Storage Device indicates says "Location 0 (Ipod)" and device is working properly
    Unplug Nano
    Swapped CD ROM with 3.5" Floppy drive
    Reboot PC
    Connect Nano
    Battery is already fully charged
    Noticed little timer thingy in upper left of Nano spinning around, probably always did it but this is first time I noticed it.
    ITunes Opens
    Nano still not shown in ITunes
    Nano still not shown in My Computer
    Nano shows up as USB Mass Storage Device under Safely Remove Hardware
    Final solution - free up drive assignment E: so Nano can use it.

    Glad you figured it out, but wow does that all make me glad I have a Mac!

  • My 6th generation nano does not show in the iTunes window.

    When I open iTunes my nano does not appear in the library window and my computer does not recognize the device, so it's also not synching. My library is intact and I've updated both the iTunes software and downloaded updates for Windows 7.  I even uninstalled and re-install iTunees.
    The only thing I haven't done is changed cords.  I'm using the cord from a 1st generation ipod.  I received the 6th generation ipod as part of Apple's replacement program.
    Everything worked fine the last time I synched a few months ago and when I recharged the ipod last month.
    Does anyone have additional tips to fix this?

    I tried all this, I mean should I reset all setting?
    Hold down the On/Off button and the Home button at the same time for at least ten seconds, until the Apple logo appears.
    that is restart.

  • My 6th gen Ipod nano does not show up in Itunes or in My Computer

    I do not think that this is a problem with my computer because I own an older 5th gen nano and have never had problems with it before. Both my computer and Itunes has no problem seeing the older Ipod right now. I have followed the troubleshooting guides and I'm still stumped on why my new Ipod won't appear. I've read several disscussions and haven't found the fix yet. My newer Ipod has been connected to another computer before but I don't know whether it was a Mac or a PC, and I believe that is the problem. I was thinking maybe it would help if I completely reset my Ipod, I don't mind losing any music, but I have no idea how to if I can't connect it to my computer. Please tell me how to reset it to facory settings or if you think that something else will work I'm completely willing to try that too. Thank you.

    Thanks for a reply
    The cable that I'm using came with my 5th gen nano. The 6th gen Ipod shows that it's connected but the computer doesn't see it, so I don't think that it's the cable.
    I did try this before when looking at the troubleshooting guide and nothing happens. It just resets and then the Ipod screen tells me that it's connected to the computer. It still is unseen by Itunes and no where to be found in my computer.
    I don't have another computer to plug it into at the moment but I may be able to visit a friend that owns a decent PC in a few days. If that doesn't work out I will be getting a new lap top in a week and I'm hoping that it will work on that, but it won't be a Mac. So, let's say it works when I plug it into one of these computers, should I reset my Ipod from there or is there something else I should do?

  • My ipod nano does not show in my itunes

    An ipod has been detected but it could not be indentified

    For anyone else having this problem, I found this solution to work. Try this first:
    a) Get Windows to restart the drivers:
        - disconnect your USB device and close ITunes
        - connect your USB device
        - if ITunes loads, close it.
    b) File explorer:
    Open File explorer and browse to
    C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers
    In that folder there should be a set of files named "usbaapl64...."
    right click on the one ending in "INF"
    Select Install.  It's very quick.
    remove the USB device
    c) Restart the computer.
    When you login again, load ITunes before you attach your USB device.
    d)If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job.
    f) If still not works, try re-install iTunes. Go into the Unstall Programs (in Control Panel) and uninstall everything that says Apple, and uninstall Bonjour. With the fresh
    install of iTunes, everything came back and is should work. Hope it helps.
    <Link Edited by Host>

  • My new ipod nano 7th generation will not sync with i tunes, followed all the apple on line trouble shooting ideas, this device will not show up in itunes but i can see it from explorer, windows 7 user.

    ipod nano 7th generation will not sysc with i tunes is updated , device does not show up in itunes under devices but shows itself in explorer.ran diagnostics failed sync. about ready to take this back to best buy.

    yes i have a solution to my problem only because of a recent phone call from apple they were great.......... in the right hand side of itunes my i pod was displayed.  click on the ipod symbol........at the top of the page you will see summary,,,,,,music,,,,,,movies,,,,,,tvshow,,,,,,photo,,,,,on this ipod.
    click on music check mark music done and sync
    problem solved
    thanks apple

  • My ipod nano is not showing up on my computer or itunes when I plug it in.  I have reset it and restarted computer, I have also downloaded new itunes.  My other ipod shows up fine so I know its not the computer or cord.

    My ipod nano 6th generation is not showing up when I plug it into the computer.  I have reset it and restarted the computer, I also have downloaded latest itunes.  My other ipod nano shows up so I know its not the cord or computer.  It is not showing up in itunes either.

    That seems to be a clear indication of an issue with your iPod and not your PC or USB cable. Have you tried resetting the Nano with it still connected to your PC? 
    How to reset iPod
    Does the iPod still charge when you have it plugged in?
    B-rock

  • IPod nano 3rd generation showing up in ITunes but will not synch

    I created new playlists in iTunes about 2 months ago and they synched to my Nano with no problems.  I created a new playlist yesterday, plugged in the Nano via a USB and I can't get iTunes to synch with Nano.  So the current playlists on it do not show up in iTunes and vice versa.  I do have the latest version of iTunes installed

    If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copies of the dodgy tracks and try redownloading fresh copies. For instructions, see the following document:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    Otherwise, I'd report the problem to the iTunes Store.
    Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
    Find the items that are not playing properly. If you can't see "Report a Problem" next to the items, click the "Report a problem" button. Now click the "Report a Problem" links next to the items.

  • My daughters ipod nano does not show up in her itunes

    My daughters ipod nano does not show up in her itunes on her computer. It has error message ipod has been detected but could not be identified properly. we have uninstalled itunes and reinstalled with the same error message. Her itunes is 10.2 .1.1 version.  If you plug her ipod into my computer/itunes it works just fine. I am also using version 10.2.1.1 
    We have tried updating to 10.5.2 itunes but it runs for ever and then says it can't update.
    help please?

    iPod appears in Windows but not in iTunes

  • Synching i5s to new PC with iTunes; i5s playlists do not show up in iTunes

    I am trying to synch my i5s to iTunes on a new PC running Windows 7 and after synching, the existing playlists on my i5s do not show up in iTunes. All the songs are there but not the playlists. How can I fix this?

    Thank you. You were right. They all ended up being there and I copied them to the new computer and used the restore option etc. But now I have a new problem.
    Even though all the 7000-odd songs show up in my iTunes library, for every single one if I want to play them, it tells me it can't find their location (with the little exclamation mark). What should I do?

  • HT1384 My ipod nano 3rd generation, when connected by usb, does not show up in itunes, does not show up on my computer, does not seem to charge by the wall charger. It just has a black screen. Any ideas for me?

    My ipod nano 3rd generation, when connected by usb, does not show up in itunes, does not show up on my computer, does not seem to charge by the wall charger. It just has a black screen. Any ideas for me?
    I've run diagnostics. Can't find device. I've tried resetting. The toggle has been turned on and off.

    Cable works fine on my other iPod. Reset by pressing menu and center button together for 6-10 seconds. Left it to charge for many hours. Started acting up while running. Suddenly the music stopped playing but my Nike + was still working for the rest of my run. Took it straight it home and plugged it in to the wall to recharge since the battery was fairly low. Looked like it recharged ok but then screen went blank and now does it not show up on iTunes, does not seem to recharge by the wall charger (apple wall charger plugged into a surge protector in India). I have turned the hold switch off and on many times.
    Sounds like a repair issue, which is not easy to do in India :(

  • IPod Nano does not show under Devices (in iTunes) but is recognized in My Device and Printers (My Comouter) as "Unspecified"

    My ipod nano is not showing under the devices tab in iTunes however, is is recognized in My Computer (Devices and Printers) as "Unspecified" I just want to be able to sync and add/remove music!!!

    Hi there!
    have you tried any of the steps mentioned here?
    http://support.apple.com/kb/TS1363

Maybe you are looking for

  • Difference between 0 and null

    Hello everyone. I have a requirement of distinguish zero values from null values. It seems the Visual Composer treats null values as zero values. I have the following query in BI: month..................ProcessA..................ProcessB.............

  • How can I Add a photo to a catalog from inside another catalog

    I have a number of large catalogs with a small subset of pictures that have been edited and printed. I'd like to be able to have just a catalog of printed images so i can easily find them, reprint them, edit them etc. but not move them from their ori

  • Receiving a Alert stating that it could not initialize the security component

    The complete Alert announcement. Foxfire will load but will not access the internet. My Explorer browser and email does work. Could not initialize the application's security component. The most likely cause is problems with files in your application'

  • XI Scenario RFC to RFC ?

    Hi,    We are having a XI scenario where in we have to get some information from SAP SCM System get the Rate & distance from the R/3 Saystem & update back in the SCM system. For this we have written a Program in SCM system which will send data to XI

  • How do you load subReports in ReportViewer in remote processing mode using LoadReportDefinition

    We have a reportViewer control on a web page that renders reports in Remote ProcessingMode. However, it does not access the reports from the SSRS server, it loads them from our own repository, and sends the Stream of the RDL file to LoadReportDefinit