Nano is non-responsive

Nano becomes completely unresponsive after a few seconds of when the unit is turned on. The unit is fully charged and I've tried the RESET option that seems to be the solution proposed for any problem someone experiences, but this didn't help. As this point, I guess the only solution is to get the unit repaired and give Apple more of my money ???
I honestly think that Apple has made more money in repair cost for the iPods than in the sale of the units themselves.

I honestly think that Apple has made more money in
repair cost for the iPods than in the sale of the
units themselves.
In which case buy some Apple stock, it was up 12% yesterday on a 40% increase in iPod sales from the same quarter last year. With your thinking that's gonna mean huge increases in income for the company in iPod repairs and loads of money in stock appreciation for those shrewd enough to buy the stock.
Now did you come here to whinge or do you really want some help?
If the answer is yes, more data is required to assist you which I'm happy to do. How old is the nano? Has it worked like this out of the box? Have you had it from new? Have you done anything to it recently which may have effected its behaviour? Are you using it on a mac or a win pc? Did you reset or restore?
Your call.

Similar Messages

  • IPod Nano is Non-responsive

    I have had my iPod nano for a few weeks. A coule of days ago, it was playing a song then it started to get funny. The song slowed down and then froze. The controls became non-responsive but the screen stayed on and lit. I connected it to my computer and nothing happened. I left it over night (unplugged) and the screen was blank my morning. Plugging it in to my compter does nothing. Nothing happens. Does anybody know what can be wrong? I want to check before I call customer service.

    I had the same exact problem. I tried all the same things and nothing worked. When I took it to my local Apple Store the determined that it was broken and non-responsive. They replaced it with a new one and the replacement is wroking GREAT!!! So, if you have purchased the iPod Nano within the last year then they should still replace it under the factory warranty.

  • I have an ipod nano 2nd generation with a non responsive click wheel

    I have an ipod nano 2nd generation with a non responsive click wheel. I have fully charged it tried resetting it and on two different computers with the latest iTunes I have restored it with the latest firmware then moved it to hold and off hold held in the menue button and select button for 10 seconds but all I get is a screen where I select the language but cant get any response from the scroll wheel.
    The hold button is working (I see the lock icon go on and off) I have done the restore procedure and then reset many times but no good I am wondering if I should open it up and disconnect the battery for 30 seconds.
    I would appreciate any advice thanks in advance. (This is my Daughters ipod mine is an 8 gig one.)

    You need a newer model iPod, a 4G or 5G. The 2G can only go to iOS 4.2.1

  • TS1382 4th gen iPod nano wheel and buttons still non-responsive after all t-shooting suggestions performed.

    Hello all,
    My beautiful 1 year old daughter pull my nano off a Bose speaker dock and ever since the wheel and buttons have been non-responsive.  I've tried a rest and all troubleshooting steps with no luck.  Does anyone out there have any other suggestions?  Thanks.
    Mike

    Mine is no longer responding to anything but when it's connected to the computer, it will restore and sync, but I cannot turn it off, play music or anything else and I would really like to know a solution for this as well!

  • Dead spot on nano 7 the play/pause button on LCD non responsive

    non responsive/dead spot on nano 7 the play/pause button on LCD

    I was also experiencing this. I'm using a MacBook Pro, and iTunes 7.6(29) in Leopard. Clicking the pause button didn't work, but the spacebar does, as does the remote control.
    One thing that seemed to work was pressing forward / backward instead. After I did that, pause button in the mini player functioned as expected, even after expanding to full-size and back, and after starting and restarting iTunes. I have not seen what happens after starting / restarting my machine yet.
    Worth a shot, anyway.

  • TS1425 My nano has been corrupted!  Won't torn off or on...has a weird smoky color screen that is non-responsive.

    My nano has been corrupted!  Won't torn off or on...has a weird smoky color screen that is non-responsive.  Any ideas?

    You'll probably need to take or send your iPod in for service either to Apple or a third party repair company.
    B-rock

  • Non responsive/entirely frozen iPod.

    [Its one of second generation nanos]
    So, I was playing music on my new iHome. I paused it so I could change the song, when it became totally non responsive.
    I put in its USB cable, and iTunes didn't even register that it was plugged in. I tried the 5 Rs, and it didnt do anything.
    The hold wont work, it wont restart, it's completely frozen.
    I really don't want to go down to the Apple store... Can anyone help?
      Windows XP Pro  

    Welcome to Apple Discussions!
    Try resetting your iPod using the steps listed here...
    http://docs.info.apple.com/article.html?artnum=61705
    It may take several attempts. That article also has tips if your iPod won't reset.
    If you can't get it to reset after several attempts, then you may need to just disconnect the iPod and wait for the battery to drain.
    btabz

  • When playing games on my iPod touch.  Some are stutters and non responsive

    Trying to play games on my iPod touch and they are slow, stuttery and non responsive. iPod software is up to date

    Do the games require an internet connection? If so then maybe slow connection.
    otherwise:
    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.

  • Firefox 13 is unusable hanging/non-responsive. I've downgraded flash, uninstalled plugins & un/reinstalled Firefox but I can't use it to try other possibl fixes

    Since updating to Firefox 13 it not only runs slow but hangs and becomes non-responsive on all different websites. I was told that the most recent Flash update was known to be incompatible with Ffx 13, so down-dated Flash and uninstalled non-essential plugins - which definitely helped, but has not fixed the problem.
    I haven't even been able to try the other potential fixes I've found on the Support site (adding into my computer's safe settings in case of firewall issue or creating a new profile) because Firefox won't work long enough for me to access them. At this point, shouldn't I just down-date to the last version of Firefox??

    All of a sudden firefox has become unstable - its hanging on the NYTIMEs website. I've done done everything - uninstalled, reinstalled, removed all add-ons, used default themes, reset firefox. Some serious problem here - I had to switch back to IE9. (Version 16.0.1 Firefox running under Windows 7)
    Oh by the way, I'm having the same problem on different computers all of which are running the latest firefox under Windows 7

  • Now that I was sent by Microsoft to your download update site to get the latest version 4.0.1, Firefox crashes (becomes non-responsive) before opening any site page I try. When will you fix this problem?

    For two weeks I have tried to use your automatic download of the latest version 4.0.1. It would sit there telling me it is trying to connect to the download computer for hours, several times overnight. Then, it became non-responsive and error messages were sent to Microsoft who directed me to your download site. After downloading your latest version several times, the new page would open. After selecting a bookmarked site, it would open (sometimes only partially) but when I tried to scroll down, it would freeze up and become non-responsive, again prompting error messages to Microsoft. They must be getting a kick out of this. I'm running a Gateway 7200S desktop with Microsoft XP and Intel single range Pentium 4 processor. I have been using your Mozilla Firefox as my default browser for several years with much satisfaction. Unfortunately, whatever upgrades were made have rendered it useless for me.

    I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
    When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
    At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
    I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

  • What are you considering non responsive with the plugins? Flash player is working just fine then I get your crash page in the middle of doing something. You say it only crashes when it's been unresponsive for 45 seconds. Mine is crashing in less then 1

    I have had problems with firefox crashing for the last three month. I have updated to the latest version with the crash protection. Now the flash player crashes about every 20 minutes or so. On your blog page you state that I will get the crash page when the plugin has been non-responsive for 45 seconds well with mine the games are going along just fine then wham crash page. Flash player was responding and you gave me crash report anyway. What's up???? Flash player is crashing within seconds not 45 seconds!!!!!!!!!!!!!!!!! Your check plugin page always states that my plugins are UP TO DATE!!!!!
    == This happened ==
    Every time Firefox opened
    == three months ago and getting worse with every upgrade you send!!!!!!!!!!!!!!!!!!!!!!!

    '''''"I have had problems with firefox crashing for the last three month."'''''
    You need to investigate the cause of your crashes that started prior to the release of the first Firefox version that offered crash protection, version 3.6.4, released in mid to late June 2010; that is just over one month ago.
    <u>'''The crash protection feature does not prevent a plugin from crashing, it prevents the whole Firefox browser from crashing because of a crashing plugin; only the tab with the crashing plugin crashes.'''</u>
    For information about report plugin crashes see: http://support.mozilla.com/en-US/kb/Plugin+crash+reports
    You need to post the crash Report IDs for the crashes occurring over the last 3 months. To do so, type '''about:crashes''' in the URL/location/address bar, then copy and paste the Report IDs (only) into your reply. See: http://support.mozilla.com/en-US/kb/Firefox+crashes#Getting_help_with_your_crash
    In addition, please do the following. Type '''about:support''' in the URL/location/address bar, on the screen presented, click "Copy all to Clipboard" and paste that into your reply.

  • Safari (7.0.1) is non-responsive (spinning pinwheel) upon start up.  It will work in temp user account but not in my main user acct.  I tried reinstall via comman-r prompt on start up but the problem persists.  Any suggestion for reinstall or repair?

    Safari is non-responsive after intitial start up.  Before it can load the homepage (google), it will hang and give a perpetual pinwheel until I force quit the program.  Safari works in temporary user account but not in my primary user account.  I have reinstalled osx via the command-r upon start up and the problem still persists.  Any suggestions on how to reinstall or repair safari?

    Thanks for thinking about my problem. I've already experimented with creating a new user, a co-administrator. The programs don't crash when that account is running, just as they don't crash when the guest-user's account runs. So it seems that the problem is limited to the default user's account, which is the one that was running when I installed the updates to the OS and the firmware. Another clue is that the programs that crash as soon as they are launched are *probably* the ones that were open at that time in that account. Yet deleting Saved Application States does not keep the programs from crashing when next launched.
    So the mystery continues, but these additional facts will help with the diagnosis, I hope.
    Thanks again for your suggestion.
    Gordon

  • Can the Genius Bar cable to my iPhone 5S to enter my passcode on a broken, non-responsive touch screen?  I need to back up the 5S before replacing it under AppleCare

    Can the Genius Bar cable my 5S to their computer or separate keyboard to enter my passcode on a broken, non-responsive touchscreen?  I need to get past the passcode to either transfer my data and pics to a new 5S or my PC computer (that the 5S has never been synced with.

    Are you serious... only bluetooth keyboards? Even if the keyboard has the lightning connector? This supposedly works on the iPhone: http://store.griffintechnology.com/wired-keyboard-for-ios-devices
    as well as this: http://www.att.com/accessories/specialty-items/logitech-apple-30-pin-wired-keybo ard.html

  • Was updating my touch this morning when an error message occured, itunes became non responsive and was shut down.  My touch is locked in the itunes update mode and my computer no longer recognizes the touch.  How do I correct?

    During update, error occured and Itunes became non-responsive and shut down.  My Itouch is now locked in the itunes update screen and is no longer identified by my computer.  How do I fix this problem?

    Try this:
    DFU Mode / Unable to Update or Restore
    http://support.apple.com/kb/HT1808
    DFU Mode
    Open iTunes and Connect the iPhone to your Mac
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time
    After 10 Seconds release the Sleep/Wake Button until iTunes tells you it has Detected an iPhone in Recovery Mode...
    The Phone Screen will remain Black... Now Restore.
    Backing up, Updating and Restoring
    http://support.apple.com/kb/HT1414

  • My Ipad 2 no longer displays anything.It may come on for a few seconds,but then half of the screen goes completely black, and the system becomes non responsive to all bottons. At other times all four sides of the display becomes black, about 1/4 inch.

    Can anyone help me on this one? I got my IPAD 2 in June 2011. It never gave problems until a few days ago. It began to "hang", becoming non-responsive to all buttons. Then just yesterday morning, it went totally black. The display no longer displays. The Battery was charged 96%. I tried the power adapter, but had the same result. I tried the resetting, holding the two buttons for 10 seconds or more but no result. I have already restored it to the factory setting,(via my PC) and put back my apps etc. But after all this I still cannot see anything on the screen.
    I know it is still working, because from time to timer I hear the message alerts, and other sounds.
    Waht is the likely solution?

    Try a Reset...
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    If no joy... Try a Restore...
    1: Connect the device to your computer and open iTunes.
    2: If the device appears in iTunes, select and click Restore on the Summary pane.
    3: If the device doesn't appear in iTunes, try using the steps in this article to force the device into recovery mode.
    From Here
    Unresponsive iPad
    http://support.apple.com/kb/TS3281

Maybe you are looking for

  • \\\\\\\ Ipod connection freezes computer ///////

    I have a 30gig. ipod video. Whenever I connect it to my computer using the USB cord my whole computer freezes including the mouse and keybord not working at all. I can connect it to any other computer and the computer works fine, but my itunes songs

  • Pinned Items in Starboard Disappear

    We are noticing that customizations to the Starboard do not persist. The behavior is inconsistent but after enough time items will start to disappear. In some cases gaps are left in the tile the item was pinned to. In some cases the raindrop appears

  • FTPS: scenario configuration

    hi gurus.... now i am able to confure the FTP server as mentioned in the blog "Along came a File Adapter, Mr. 'FTP' and Rest of the Gang By Shabarish Vijayakumar", it is working fine. but now i want to work on FTPS configuration. is it sufficieant to

  • Support for hp scanjet 5300C?

    Is there support for support for hp scanjet 5300C?

  • Add Media in PremiereElements 11 from a Canon Legria HF G10 AVCHD cam does not work

    Hi Everybody, I need help as I didn't find anything in the FAQ concerning my problem. I use a canon Legria HF G10 camcorder (AVCHD). Importing videos into Premiere Elements 10 is OK But after upgrading to the version 11 of Premiere Elements, I do not