Nano just won't work!

I used my nano not more than 3 hrs after the last time I used it and when I put my headphones on I could hear the clicks but not see an image, then about five minutes after that I couldn't even hear the clicks. I thought it was the battery, so I went to charge it and my computer wouldn't even recognize it when I plugged it in the USB port. It worked fine for the first week I had it and then just stopped. What could it possibly be???

Possible fix?
http://discussions.apple.com/thread.jspa?threadID=1323529&tstart=0
This worked for me.

Similar Messages

  • My iPod Nano just won't work anymore. Please help if possible.

    I have had my iPod Nano for under a year, and this past month it has been going crazy on me like for a week I was unable to turn it off. However, it all of sudden worked fine but two weeks later while I was listening to it, it just turned off on me. Now I cannot open it and I have tried charging it but nothing shows up and it just will not turn on. It is like my iPod has died. Has anyone else gone through this? Thanks for the help.
      Windows XP  

    Try these.
    My iPod won't turn on.
    iPod battery doesn't charge.
    My iPod won't wake up.
    iPod touch-wheel is unresponsive after waking from sleep.
    When restoring the iPod, it's recommended to put it into disk mode first.
    Putting iPod into disk mode.
    If none of the above help, then it's probably a service issue.
    You can arrange online service here.
    Service request.
    Or if an Apple store is near you, take it there and have them check your iPod.

  • I am having a big problem. I am not getting notifications from snapchat and only snapchat. I've made sure every notification setting was on and it just won't work. I have also restored my phone and deleted the app and re-downloaded it multiple times. Help

    I am having a big problem. I am not getting notifications from snapchat and only snapchat. I've made sure every notification setting was on and it just won't work. I have also restored my phone and deleted the app and re-downloaded it multiple times. It just wont give me my notifications. Help please.

    Go to Settings > Privacy > Location Services.
    Turn off SnapChat.
    Go to Settings > Notification Center
    Turn off SnapChat.
    Restart the device.
    Go to Settings > Privacy > Location Services.
    Turn on SnapChat.
    Go to Settings > Notification Center
    Turn on SnapChat.
    Test the issue.

  • My front Facing camera just won't work It freezes everytime

    My front Facing camera just won't work It freezes everytime

    Please tell me that it has NEVER been jailbroke.  If that's the case, here are some standard repair procedures:
    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow the on-screen directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here.  You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again.  Also, if you have IOS-7, read this.

  • Nano Suddenly Won't Work.

    My iPod Nano (7th gen.) won't connect to iTunes anymore. I just started having this problem last week. A message pops up saying that an unrecognized iPod has been found. Please unplug it and plug back in. If it continues, to uninstall iTunes and reinstall. I did all that, and it still continued. So I searched on here for some other things and found to do something in my control panel. I tried that and it still won't work. I've added new music and like to use my iPod everywhere. The only way to listen to the newer music is by my laptop now. Also was wondering if it had anything to do with the Windows 8.1 update? Because it wasn't synced to my laptop since January. I tried last week (which was soon after my laptop had updated 8.1) and then it did this? Is it not supported or what? Please help!!!

    You might need to restart the Apple Mobile Device Service, as described in ituem #3 at the bottom of this article: http://support.apple.com/kb/TS1538.  If that doesn't resolve it, try uninstalling iTunes and all of its components as by following this guide exactly: http://support.apple.com/kb/HT1923, then reinstall iTunes.  You must follow this guide exactly or it will not be successful.  Note: uninstalling iTunes will only remove the application; it will not touch your iTunes library or data.

  • ITunes just won't work!

    Hi there,
    I've been trying to get iTunes working and it just won't! I have had an iPhone for a few months, and not sure whether this or a software update has anything to do with it? I basically use my iMac for the internet and as a glorified jukebox, but now I can't get it to open iTunes, the icon just bounces in the tray and then disappears.
    If I look at the iTunes application by clicking on the "Macintosh HD" icon, it looks like the computer thinks it's opening it though as the last time of use of the application is always when I last tried to open it (unsuccessfully). Please don't tell me to turn it off and on again as I've been at it for weeks! I've tried getting rid of iTunes and downloading it again, but that's not working. I can still see all of my songs, and have just found out that if I go into my music folder, I can preview the songs, which makes me think that there must be some form of music playing software still working on my computer!
    It's also affected iPhoto and Safari, as they are both doing the bouncy tray thing, but I think if I can fix one, I can fix them all (except I can't fix one!).
    Please help! So frustrating!

    Hi mm-
    One of the users on our network has the same problem (She's running OS 10.4). We've updated the OS (dot 11 now? whatever it is -- the newest iteration of 10.4). Here's what we've done (not necessarily in order, as we've performed some of these 'fixes' more than once):
    1) Ran Disk Utility and repaired permissions
    2) Reinstalled iTunes with a fresh download from the Apple site.
    3) Deleted the Genius list from the iTunes folder.
    4) We even ran some maintenance in Terminal -- sudo periodic daily, weekly, monthly, and update_prebindings.
    We still get the same inability to launch iTunes. If we click on the icon in the dock, it bounces once or twice and then stops. No launch, no error. No iTunes.

  • Acrobat X XI Windows 7 just won't work

    I don't know if this is the appropriate place for this question, there doesn't seem to be much of an altenrative.
    I attempted to use a trial of acrobat x pro some months back but was not able to get the product to work no matter what I tried (installing reinstalling etc etc ad nauseum)
    Acrobat 9 works fine without any issues.
    Acrobat X will not work
    Today I've tried xi pro - I thought great, maybe it has been fixed; however, I have the same kinds of issues. All the program dialogue boxes are misshapen, bits are missing and I have to resort to task manager to shut them down as they won't otherwise. There's also weird looking - big, misshapen text that has 'crossed out' lines through it - one lot mentioned security certificates.
    I'm attaching a screenshot of the kind of dialogue box I get.
    I'm using CS6 as a trial, though I've purchased the PS subscription.
    I'm using windows 7 64 bit
    I plan to purchase the full CS6 next year as a student, but theres not much point if it won't work,,,
    I'd love a solution to this.
    Thanks

    Thank you so much, I don't think I would have ever found that post - and it worked, I'm extremely grateful for your help, you've made a big difference to my day

  • IMovie '09 just won't work

    I was working on a video in iMovie '09 and it stopped responding. So I forced closed and opened back up and since then (about 2 weeks ago) it just doesn't work, and by that I mean I can click nothing, nothing is responding but when I go to force close it is still responding so I really don't know what is wrong.
    Can someone please help?

    Hi,
    Not normally my area (I followed a Link in iChat here).
    I can relate this to some issues with some cameras and iChat. Some will apply here possibly.
    iChat 2 was designed initially for a Firewire cameras that could output a DV signal.
    Obviously the External iSight was the choice but other Firewire able DV cameras - if - the output was DV could be seen by iChat.
    If the format for output ws for a TV/VCR (as in PAL or NTSC) then iChat could not "see" it.
    Later HDV Cameras are also a problem for iChat as the format size has to be in 4 X 4 ratio
    iMovie can "see" many more codecs/formats than iChat can although it doe have problem with mpeg2
    I Googled your Model number an got link to Samsung but then could not find it under CamCorders.
    Another Link provided me with the information it is a Stills camera.
    This says it records in H264 which iMovie should be able to Import.
    H264 can have Variants and you will need to know if iMovie can see this one.
    Movie Clip : H.264 (MPEG4.AVC)
    I have a Very old Analogue camera that I imported film from using a DV Converter.
    I had iMovie set at the time to use PAL for the Project format (I think it applies to the Playback)
    It is a long time since I did anything in iMovie.
    I hope this start you off on the right track.
    5:47 PM Friday; November 13, 2009
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

  • Help - Php just WON't work

    I followed these directions and it simply won't work. Help. Why don't you put PHP and MYSQL in the installer itself? This is why I use Apache, and I can't stand Apache, I want to use sun, but apparently there is no hope for mysql to actually worth with your server, and php can?
    4.2 Configuring Web Server to use PHP as NSAPI Plug-in
    To configure the Web Server to use PHP as NSAPI plug-in, perform the following steps:
    Go to the web server instance's config directory.
    For example (UNIX):
    /sun/webserver70/https-mywebserver/config
    Add the following lines to the magnus.conf file:
    UNIX/Linux:
    # Initialize PHP v5.x
    Init fn="load-modules" shlib="libphp5.so" funcs="php5_init,php5_close,php5_execute,php5_auth_trans"
    Init fn="php5_init" errorString="PHP Initialization Failed!"
    Windows:
    # Initialize PHP v5.x
    Init fn="load-modules" shlib="php5nsapi.dll" funcs="php5_init,php5_close,php5_execute,php5_auth_trans"
    Init fn="php5_init" errorString="PHP Initialization Failed!"
    Edit the obj.conf file to enable the Web Server to process a PHP-based request.
    Important note: If there are more than one file with the name "*obj.conf", be sure to edit the correct file. Use wadm's get-virtual-server-prop command to get the correct file name. For more information on this command, see http://docs.sun.com/app/docs/doc/819-3283/6n5h03hsu?a=view.
    For example:
    <web server install dir>/bin/wadm get-virtual-server-prop --user=admin --config=CONFIG --vs=VS object-file
    (a) Add the following lines as the first directive of the "default" object in the obj.conf file.
    <Object name="default">
    Service type="magnus-internal/php" fn="php5_execute"
    </Object>
    (b) Modify the PathCheck directive if you want the Web Server to handle index.php as an index for document directories.
    change
    PathCheck fn="find-index" index-names="index.html"
    to
    PathCheck fn="find-index" index-names="index.html,index.php"
    Add the following line to the mime.types file to register the PHP extensions with the Web Server.
    type=magnus-internal/php exts=php,php3,php4,php5
    (Windows only). Add the <php install directory> to the system PATH so that web server can load the required dlls. Because the web server runs as a windows service, any change in the system PATH requires a restart to take effect.
    For example:
    PATH=...;C:\Sun\Webserver70\plugins\php;

    You might also consider simply using the pre-compiled, comes with an installer script copy of PHP from here .
    Unfortunately this version of PHP is a bit dated. Hopefully Sun will update it at some point.

  • 32 Bit Java Just Won't Work

    I need to install both 32 bit and 64 bit java on my computer to run a variety of different applications. 64 bit installed perfectly, but 32 bit just won't. I get the message:
    ERROR: Could not create java virtual machine.
    ERROR: A fatal exception occurred. The program will exit.
    What do I do to fix it?

    I'm having the same problem. I'm on a 1st Gen (June 2006) MacBook. I'm completely up to date on Software Update, but I can't get Java applets to display in any browser. I've checked Java Preferences, and I know that Java is installed on my computer. What gives?

  • Just won't work at all

    Last year I dropped and kicked my Ipod Mini. I went to this site and did everything it told me to do. It never worked. I really need an Ipod and I have been mad because it won't work. I plug it in to charge. Does not show up on Itunes or computer, and has the folder with . So I toggle with the hold switch and press menu and select at the same time. After several seconds the apple logo shows up and does not go away until the Ipod is dead again. *Please I really need help on this one.* Can i fix it? Do I have to buy a new on? Take it in to get it fixed? I really don't know.

    I would book an appointment for the Genius bar at the closest Apple Store. http://www.apple.com/retail/geniusbar/ . A genius can take a look a the ipod, and see if they're any thing they can do to get it working. If it is dead, they can offer you other solutions.

  • Express appears to be fine but just won't work

    I am still running 10.3.9 with my G4 ibook and until a couple days had no complaints about my airport express. The green light is on, all the bars are a go. Except, when I try to get onto the internet (using Road Runner), nothing loads. I don't even get an error page - it's almost like it doesn't know it can't get on. Like I said, everything looks fine (all systems go). I unplugged my express and was able to connect to the internet directly from the laptop so it's not a service issue. It's like it spontaneously just doesn't work. I've had the signal go out before and have reset it - this time is different because everything appears to be fine (I've unplugged it, etc, all the usual tricks). I would have expected to get an amber light or to be unable to access my wireless network (which I can do). Has this thing just died and I don't know it? Any words of advice/wisdom out there? Thanks!

    Hi campo72,
    I understand that you are having a problem with your wireless connection. Could you please tell me what operating system you running on your Mac? I suggest you follow the steps in this document for Installing the Printer Software for a Wireless Network Connection.
    I hope this help, let me know.
    Thank you,
    I worked on behalf of HP.

  • [CS3] this._root. or this._parent just won't work + retrieving a MC's y position.

    I've got some buttons which when i click them i want them to
    make a particular MC move downwards. Well the thing is that when i
    try to reference to that particular MC it just won't happen (yes
    the MC has an instance name). For the button i tried something like
    btn1.onRelease = function() {
    var mcReferece = this._root.myMC;
    trace(mcReference);
    or
    btn1.onRelease = function() {
    var mcReferece = this._parent.myMC;
    trace(mcReference);
    since they have the same parent.
    Both returned undefined.
    I've also tried putting directly myMC in the tween, with no
    effects whatsoever.
    The second question is, how can i retrieve the y position of
    a MC?
    Also i've tried putting the tween on the MC itself...
    onClipEvent(enterFrame){
    import mx.transitions.Tween;
    import mx.transitions.easing.*;
    var myTween:Tween = new Tween(_level0.myMC, "_y",
    Elastic.easeOut, 195, 545, 10, false);
    But not only does it not animate it doesn't even go where
    it's supposed to go...
    Thanks in advance.
    P.S. This might be rlly simple to solve but it's been bugging
    me and can't go on without it. Couldn't figure it myself. Got rlly
    annoyed at some point :|

    The only 7 i can think of that i have in the project is what
    comes after 6 (ridiculous i know... xD) :
    for (i=1; i<=6; i++) {
    var current_btn = this["btn"+i];
    current_btn.onRollOver = function() {
    var currentAlpha = this.cover_mc._alpha;
    var myHoriTween:Tween = new Tween(this.cover_mc, "_alpha",
    Strong.easeOut, currentAlpha, 0, 0.5, true);
    current_btn.onRollOut = function() {
    var currentAlpha = this.cover_mc._alpha;
    var myHoriTween:Tween = new Tween(this.cover_mc, "_alpha",
    Regular.easeIn, currentAlpha, 100, 0.5, true);
    but that's just the animation for the individual buttons.

  • ScrollToIndex just won't work ... any workarounds ?

    Hello,
    Any ideas why scrollToIndex won't work ? Tried it on a
    tilelist,
    datagrid, ... all without any result. Not even an error
    message !
    This works, as the last item is selected in the tilelist:
    tlProductsSearchResults.selectedIndex =
    tlProductsSearchResults.dataProvider.length - 1;
    But this one doesn't do a thing:
    tlProductsSearchResults.scrollToIndex(tlProductsSearchResults.dataProvider.lengt\
    h
    - 1);
    Best regards,
    Frank

    found a solution !
    Had to add "dg.validateNow();"
    blog-example

  • My Yahoo Toolbar is gone. I tried re-installing it several times but it just won't work.

    '''My Yahoo Toolbar has disappeared'. I tried re-installing it several times but it just won't appear in the Toolbar space. I looked in the Toolbar view and it is checked. I even tried unchecking and re-checking the Yahoo Toolbar view. No luck. Please help. I use that toolbar constantly.''

    Could be. They're in the midst of updating their servers at the moment so expect the odd mishap now and again.
    Oh, and could you click the "Solved" button so that it takes this thread out of the loop?
    Thanks.

Maybe you are looking for