Nano not connecting a vista computer

Have made sure up to date iTunes but it is saying cannot identifiy
Any ideas???

1. Plug in your iPod, then in iTunes in the top left corner click help> run diagnostics. On the box that comes up, check the last two things. Click next and it should identify your iPod.
2. Click on your windows start menu. Type in "services". Click on it and when it pops up, on the bottom of it click on "standard". Now Scroll down to find "Apple Mobile Device" Right click it when you see it and click on "Start". When it has started, close iTunes and replug in your iPod and it should show up.
3. Check the USB cable
4. Verify that Apple Mobile Device Support is installed
5. Restart the Apple Mobile Device Service and verify that the Apple Mobile Device USB Driver is installed.
6. If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job.
7. Check for third-party software conflicts.

Similar Messages

  • When my Nano is connected to my computer, it shows that I have music downloaded to it, but when i touch the screen to play the music, it is not showing up and is not available to play.  I've tried reloading it with no success

    When my Nano is connected to my computer, it shows that I have music downloaded to it, but when i touch the screen to play the music, it is not showing up and is not available to play.  I've tried reloading it with no success

    iPod touches or any iDevices from Apple sync only to one computer. If you sync to a different computer, all your music will be replace with the music from the new computer's iTunes. If the music were purchased from iTunes, you can re-download them again otherwise the music on iPod touch will be deleted. Do you have iTunes backup? 

  • My ipod nano 6th gen has a white screen that states ok to disconnect and it's not connected to the computer

    I listened to my ipod last night.  My son went to get it and it has a white screen that states ok to disconnect (it is not connected to the computer).  It won't let me do anyting to it.  I tried to hook it up to the computer and it changes to do not disconnect and then won't let me eject it - it says sync is done but it says I can't disconnect because files are being used somewhere else.  Then I pulled it out and it goes back to ok to disconnect.
    Hope someone can help me. 

    i sent mine off to craig at [email protected], it was £25.....like new again

  • TS1369 why doesnt my 5th gen ipod nano not connect with windows 8?

    why doesnt my 5th gen ipod nano not connect with windows 8?

    Doublechecking. Have you also tried a complete uninstall of both iTunes and all the other related software components and then a reinstall? If not, try the instructions from the following document:
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8

  • Nano Not Connecting to Windows

    I think i have tried everything now. i did all the troubleshooting on Apple.com/support, tried resetting my nano
    re-installing all of the software. i just cannot get my computer or even Itunes to recognize that my nano is
    there. 1 time my nano said do not disconnect for the whole time it was plugged up but after that i cannot
    even get it to say that. i have checked device manager, plug and play, my USB ports (which are 2.0). I
    tried disabling my firewall. and putting the nano into disk mode. nothing i do can get it to recognize that
    the nano is connected to my computer. the battery is fully charged and everything seems to be working properly
    sometimes when i re-install the software it will say Error-1603 cannot install. but i downloaded the new version
    of it and it installed fine. but it still does not sync with my ipod. i have a rather good knowledge of computers
    and have tried everything that i can think of. my computer will not even recognize it as a portable hard-drive.
    nothing shows up in the device manager or disk management. or in the control panel. my plug and play may
    not be recognizing it but as far as i know everything (with maybe the exception of my plug and play) is
    working. whenever i restart my computer it says do not disconnect for a few seconds and then it dissapears.
    so i know that the usb port that it is plugged into is working.

    Jason,
    Just a thought, have you tried any other USB devices to determine if your PC recognizes them?
    Jrsy

  • My ipod touch has a usb cable picture with an arrow pointingto the itunes logo. the ipod will not connect to a computer and is unable to be turned off as there is no red power slider when the powerbutton is pressed. what can i do to fix this?

    my ipod touch has a usb cable picture with an arrow pointing to the itunes logo. the ipod will not connect to a computer and is unable to be turned off as there is no red power slider when the power button is pressed. what can i do to fix this?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • I have an account for apple but this is not acceptable for i cloud. It say it is correct ID and password but this is not icloud account. So my phone can not connect with my computer and not synchronization too

    I have an account for apple but this is not acceptable for i cloud. It say it is correct ID and password but this is not icloud account. So my phone can not connect with my computer and not synchronization too. Last a few months i have not use this phone. Just i start to use again. So most probably i gave my old mail address as a ID or password. So how can i clearing this subject. regards

    ErolSinan wrote:
    ... there is no button for update between the About and Usage buttons in the General. ...
    Correct. That is only a feature of iOS 5 or later...
    ErolSinan wrote:
    ... yes my phone is 3G.
    then it can only go as far as iOS 4.2.1

  • How to transfer/sync my iphone 4 music to my new computer - not connected phone to computer at all yet

    How to transfer/sync my iPhone 4 music/photos etc  to my new computer - not connected phone to computer at all yet.
    Computer has Windows 8

    SEARCH!
    http://lmgtfy.com/?q=migrate+iphone+to+new+computer

  • My wireless all in one says it is not connected to my computer and yet it prints just fine. can't sc

    I cannot scan, the error message says I am not connected to a computer and yet I am able to print from my  computer.
    Why would it then be saying that I am not connected to my computer??

    What operating system? What router?
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • My iPod Touvh 4th Generation won't turn on. It will not charge even after I used a few chargers and will not connect to a computer. The Home button is broken and I don't know if the Lock/Sleep button is now broken or stuck as well. What should I do?

    My iPod Touvh 4th Generation won't turn on. It will not charge even after I used a few chargers and will not connect to a computer. The Home button is broken and I don't know if the Lock/Sleep button is now broken or stuck as well. I believe there may be a problem with the battery or the backlight. I've had my screen replaced once by some stooges. What should I do?

    Try:
    - iOS: Not responding or does not turn on
    When it  says place the iPod in recoverymode use one of these programs.
    For PC
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    If necessary:
    Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
    and                                  
    RecBoot tip
    For MAC or PC       
    The Firmware Umbrella - TinyUmbrella
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • My ipod touch 4g will not connect to my computer. Its not even in the device manager

    My ipod touch 4g will not connect to my computer. Not to charge or connect to itunes. My usb ports work fine with everything else. I went and bought a new wall charger that came with a synce cord and it works fine, as a wall charger with wont work with my computer. Ive done the whole rebooting, re downloading itunes, redownloading apple software, the whole 9 yards.
    What exactly happens when I plug my ipod touch 4g up if it turns on like it suppose to but instead of going to the home screeen with the little lighting bult in the battery is just acts like its not even plugged in. It just goes to connect to itunes screen.
    I sent it to apple and they told me that whatever was wrong with it wasnt under warrenty but didnt tell me what it was. Ugh! It doesnt have water damage, I checked the indicators. So what do I do now? I would rather not go and get it fixed and spend 100 dollars. I would rather try and figure it out myself. Help please!

    From what Apple said it appears you have a hardware problem. I would either pay to get it fixed or make an appointment at the Genius Bar of an Apple store and discus it with them.

  • Ipod nano Not detected in my computer or itunes

    Okay, first off, I have tried several different things to correct this issue, and NOTHING has become remotely helpful.
    My computer doesn't even make the little "ding" sound that I get with all my other usb devices upon plug in. The ipod will be charging and nothing else, nothing in device manager, my computer, itunes and wherever else it is at. The Ipod was given to my by a friend who moved away a few weeks ago, and I finally got the charger yesterday. The ipod can play songs and what-have-you but will not connect to the computer in anyway but to charge. Resetting does NOT work, I repeat, it does NOT work.
    I cannot restore it as it doesn't even get detected by anything on the computer. The cord is NEW so it is not that, all the usb ports WORK so it couldn't be that, and it is not my computer as I tried on a laptop and another desktop. I refuse to send it in for repairs as I do not wish to spend money on something I haven't even got to use, and would be extremely upset to get it sent back saying it's faulty. :/
    Oh and itunes is the latest version.
    READ THE WHOLE THING BEFORE OFFERING HELP.
    I will not read anything mentioning resetting, ports, computers, cable and all the stuff I have ALREADY tried.

    How can I give a detailed description of everything
    Well, you wrote you would not read any posts if you have already tried something so anyone responding would need to know exactly what you have tried.
    Have you restarted the *iPod Service*?
    "1- Quit iTunes.
    2 - Right click on My Computer/Computer and click Manage. If Windows requires your permission to continue, click Continue.
    3 - Click the plus symbol to the left of Services and Applications.
    4 - Select Services listed under Services and Applications.
    5 - Double click iPod Service in the right hand panel.
    6 - Click the Stop button under the General tab and leave the iPod Service Properties window open.
    7 - Connect your iPod and wait until it is visible in My Computer/Computer.
    8 - Click the Start button in the iPod Service Properties window.
    9 - Open iTunes."
    Check your registry keys -> A computer that is running Windows XP cannot detect a USB thumb drive, an Apple iPod, or an external hard disk drive
    The ipod is obviously on a working cable if it can charge form the usb.
    Not necessarily.
    A USB cable has 4 pins, 2 for power and 2 for communications/data transfer.
    Don't even need the 2 comm lines for it to charge.
    they will force me to pay too much for a new one.
    They won't "force" you to do anything.

  • My iphone will not turn on.... it froze earlier today and now it will not turn on all i get is a black screen with the apple symbol every once in awhile... also it will not connect to my computer so i can reset it to factory settings

    My iphone will not turn on.... it froze earlier today and now it will not turn on all i get is a black screen with the apple symbol every once in awhile... also it will not connect to my computer so i can reset it to factory settings

        Sammyhunter lets get you back in action! Has there been any physical/water damage to the device? Try pressing and holding the home and power button together. Once the Apple symbol appears release both buttons. Keep us posted!
    AshleyS_VZW
    Follow us on Twitter @VZWSupport

  • HT1923 my iphone4s is not connected to my computer after installing itunes...

    my iphone4s is not connected to my computer after installing itunes... if i uninstall itunes and connect my phone then computer is detecting my phone.... how to solve this plz help me....

    itunes is creating the problem... if i connect my iphone to itunes it is not detected.... after uninstalling itunes, iphone connects with computer.... u get me?

  • N70 not connecting to the computer

    I've got a nokia N70 and yesterday the PC suite said that a new version of the suite was available..So i updated to the new version.But when i tried to install it, i got an error saying that one of the installation files was corrupted.I then reinstalled the older version using the CD.But the problem is, the phone isnt connecting to the PC anymore.When i click on "get connected",it doesnt go beyond the "attach your phone to the computer" screen.I tried reinstalling PC suite again, but that didnt help.Any idea whats wrong?
    And yes..while installing pc suite, the phone was not connected to the computer..Message Edited by kreigsmarine on 12-Mar-2007
    06:30 AM

    update:i downloaded the latest version of pc suite again...and now when i click on "get connected", it says "there is no available connection type and therefore connection to phone cannot be established"..what the heck am i supposed to do now??

Maybe you are looking for

  • GR/IR automatic clearing

    There are some invoices that are blocked because of differences of less than 10 USD. Where should I set the tolerances to get these auto-cleared. Thank you Krishna

  • Glitch with Indesign 2014

    I am having an issue with Indesign 2014. The document is fine on Indesign - I have imported drawings as EPS files, some images and I have text. I then exported the document as a PDF and all the text in the EPS drawings is distorted. This has not happ

  • Photo stream not working on mac

    photo stream isnt detected in iphoto! Dont know what to do!

  • Library window does not work

    Though I am signed in to Creative Cloud (even within PS) when I open the Libraries window, it tells me I am signed out and must sign in to use.  Why doesn't it see that I am signed in and how can that be corrected?

  • Getting a new Intel Mac, Logic question

    I currently run Logic Studio on my dual G4, which is finally starting to die on me. I am going to be getting one of the quad Mac Pros soon, and I wanted to make sure that my current Logic Studio will install on it. In other words, does the move to 10