Nano not showing up in iTunes or My Computer

I had to reformat my computer hard drive and reload my computer with Windows Vista Ultimate. I lost all of my music on my computer but they still are on my Nano. I tried to reload the music from my Nano to my computer but that didn't work and now I can't see my Nano on iTunes or on my computer. I have reset the Nano several times and uninstalled iTunes and reinstalled the latest version of iTunes, but nothing has helped. Can someone give me steps to correct this? I don't want to lose all of my music on my Nano............

Try redownloading itunes, and ( i had this problem with my aunts ipod nano)and plug your ipod in, something should pop up saying whether you want to transfer your purchases or something else...pick transfre purchase. Then, if your computer isnt authorized, another screen should pop up and it should say your computer isnt authorized, go to Store and Authorize (in main menu at the top of itunes). It should work then but if it doesnt im sorry and good luck with your iPod.
p.s. I have a ipod video so mine might work a little differently when it comes to how itunes works, and recovering your songs ( also, check your computers' hard drive to check and see if some of your songs were back up on the back up drive..probably not but it doesnt help to check) but if my information is inaccurate im very sorry

Similar Messages

  • Ipod not showing up on itunes or my computer.it recharges when i connect it

    Ipod not showing up on itunes or my computer.it recharges when i connect it but it dosent show up under devices so i cant sync any music!!the screen on the ipod would usually say "connecting"or"do not disconnect"but it dosent say that anymore!!Ive been trying to fix it for DAYS but i cant find a good enough solution.PLZ HELP!!(p.s. i have a 4th generation nano)

    Hey there,
    A file or some files may have become corrupt somehow during connecting or disconnecting the unit. Try putting it into Disk Mode and see if that helps. To put it into Disk Mode, hold the Menu and Select buttons until the Apple logo appears. When it does, immediately press and hold the Center an Play/Pause buttons until you see a confirmation that your iPod has been put into Disk Mode.
    If you are able to do this, it may be a good idea to restore the iPod to its original settings. Keep in mind that by doing this you are erasing all the music and files from your iPod so make sure they are backed up on your computer somewhere. More on restoring your iPod can be found in the Apple document below.
    Hope this helps.
    http://support.apple.com/kb/HT1339
    B-rock

  • I purchased two tv shows on my new ATV2, but they do not show up in iTunes on my computer. Was hoping to download to ipad2 for travel. Help!?.

    I purchased two tv shows on my new ATV2, but they do not show up in iTunes on my computer. Was hoping to download to ipad2 for travel. Help!?.

    Welcome to the Apple Community.
    Have you tried the 'Purchased' option in the top right corner of the Store window in iTunes

  • TS1567 my Iphone 4s will not show up in itunes or my computer

    my Iphone 4s will not show up in itunes or my computer, I upgraded from windows 7 to windows 8. i have tried all the above and lots more and nothing seems to work. i have a ipod mini and its the same with that. they show up in the device manager under other devices but is says "This device is not configured correctly.(code 1)" and when i try to update driver it says "windows found driver software for your device but encountered an error while attempting to install it. please help

    After being on the phone for hours to apple who were very helpful i had no luck we triad everthing, While waiting for a call back today i refreshed windows using the upgrade disk i had from my upgrade from windows 7 to windows 8. it did not wipe any files but did delete lots of apps but gave me a list of deleted apps. Then I reinstalled itunes and connected ipad then iphone and it finaly loaded the driver and alowed me to synk with itunes. 

  • Hey my iPod is not showing up on iTunes and my computer doesn't recognize it. It runs out of battery very fast and only shows the 'Connect to iTunes" screen. What do I do?

    Hey my iPod is not showing up on iTunes and my computer doesn't recognize it. It runs out of battery very fast and only shows the 'Connect to iTunes" screen. What do I do?

    http://support.apple.com/kb/ht1808
    http://support.apple.com/kb/ts1567
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

  • Hey Apples Users, my iPod 80 GB ins not showing in windows, itunes and my computer

    hey Apples Users,
    my iPod 80 GB ins not showing in windows, itunes and my computer
    Could anyone in there show me the best solution for the same
    thanks in advance

    First of all does, the iPod power on okay? 
    Have you tried plugging the iPod into a different USB ports, preferably a high powered USB 2.0 port on the back of your PC tower (these are directly soldered onto the motherboard and receive much high outputs of power than the ones on the front).
    What about a different USB sync cable?
    What shows up on the iPod's screen when you connect it?  Does it charge at all?  Maybe try resetting it with it still connected to your PC.  To do this, press and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear.
    B-rock

  • Ipod nano not showing up in ITunes 9.2.1.5 on Windows XP

    My mom has a 4GB 1st generation nano and I've been trying to add new songs via iTunes. I have tried all the suggestions for "iPod appears in Windows but not iTunes" article and I still cannot get her ipod to show up in iTunes. The computer I'm trying to get the ipod to work on is a desktop computer running Windows XP. I tried my mom's ipod on my laptop computer thinking maybe it was a problem with the ipod or the cable. It worked just fine. I have Windows 7 running an identical version of iTunes. I'm a grad student and I'm just home for the summer. I need solve this problem and fix my mom's ipod so it will work on her own computer while I'm away. Is there anything else I can do to get her iPod to show up in iTunes?

    have you tried to reset the ipod?

  • Ipod not showing up in Itunes on Mac computer

    When I plug in my ipod touch to my computer it does not show up in Itunes. do I need to reset my ipod touch?
    Help!!! I have done all the things to troubleshoot this situation other than reset my ipod. I am afraid to do this. I don't want to loose anyting.

    I would try:
    - Rebooting your computer
    - Resetting the iPod.  Nothing would be lost.
    Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Trying another USB port and cable
    - The troubleshooting here.  You di not say what you alread tried.
    Mac OS X v10.6 or later: iOS device not recognized in iTunes after restart
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
    - Last would be to place it in recovery mode and then restore it.  However, you will loose everthing on the iPod.  Restoring from backy and syncing will then restore you iPod to what it was before the last backup.  For recovery mode see:
    iPhone and iPod touch: Unable to update or restore

  • No Nano - does not show up in ITunes or MY Computer

    I'm new to the IPOD and have had the Nano 1 week of which I spent 6 days trying to figure out why it wouldn't show up in ITunes.
    Solution - Eliminated extra drive assignments. I had used all the drive letter assignments from E: up to T: and had to remove the E: assignment so the Nano could use it.
    More info - The first time I plugged the Nano in it worked great. I loaded music onto it that I had previously stored and was able to listen and play it.
    So I decided to add more music from my CD collection.
    I removed the 3.5" floppy drive from the laptop and inserted the CD reader.
    !! That was the critical change because now the CD reader became D: drive which the Ipod had been using previously (I'm assuming, I never actually checked until it wouldn't work).
    After that I spent days trying to figure out why the Nano would no longer show up in ITunes. See details below:
    What I've Tried:
    1st Use:
    Windows XP 2002 SP1
    Had Itunes already on PC
    Charged Nano for a few hours until battery indicated full charge
    Plugged in 1st time, loaded Nano with tunes, no issues.
    Played music for awhile
    2nd Use:
    Swapped 3.5" Floppy drive for CD ROM drive
    Added more music from CD's
    Plugged in Nano
    ITunes opens up automatically
    Nano not shown in ITunes
    Nano not shown on My Computer
    Checked USB H/W configuration - shows IPOD connected
    Nano is charging, indicates "Do Not Disconnect"
    Disconnect Nano
    Shut down, Restart PC
    Reconnect Nano
    No change - no Nano
    Swapped USB Ports, no change - no Nano
    Disconnect Nano
    Reset Nano
    Reconnect Nano
    No change - no Nano
    Disconnect Nano
    Remove Itunes
    Reload Itunes from CD-ROM,
    Connect Nano when prompted by installation program but apparently doesn't recognize Nano is connected
    Installation gets stuck (45+ min) trying to "Format" Nano (Nano doesn't respond)
    Skip to next part of installation
    Shutdown, Restart PC
    Reconnect Nano
    No change - no Nano
    Disconnect Nano
    Remove Itunes
    Reload Itunes from CD-ROM
    Installation gets stuck again trying to "Format" Nano (Nano doesn't respond)
    Skip to next part of installation
    Set USB Drivers configuration to not disable power to USB port
    Shutdown, Restart PC
    Reconnect Nano
    No change - no Nano
    Shutdown, Restart PC
    Remove Itunes
    Shutdown, Restart PC
    Reload Itunes from CD-ROM
    Skip connecting Nano as part of installation
    Shutdown, Restart PC
    Run Ipod Updater 2005-09-06 program before plugging in Nano
    Connect Nano
    Restore software on Nano
    Nano Restores itself
    Nano indicates "Do not Disconnnect"
    ITunes opens up automatically
    Nano still not shown in ITunes
    Nano still not shown in My Computer
    Checked System\hardware\device manager\USB Mass Storage Device indicates says "Location 0 (Ipod)" and device is working properly
    Unplug Nano
    Swapped CD ROM with 3.5" Floppy drive
    Reboot PC
    Connect Nano
    Battery is already fully charged
    Noticed little timer thingy in upper left of Nano spinning around, probably always did it but this is first time I noticed it.
    ITunes Opens
    Nano still not shown in ITunes
    Nano still not shown in My Computer
    Nano shows up as USB Mass Storage Device under Safely Remove Hardware
    Final solution - free up drive assignment E: so Nano can use it.

    Glad you figured it out, but wow does that all make me glad I have a Mac!

  • Ipod nano not showing up on Itunes - PLEASE HELP!

    I recently had a problem with my nano 4 GB so I restored it to its original factory settings. Now when I plug it in to the computer it shows up in My COmputer but NOT in Itunes. I tried the troubleshooting techniques on the apple ipod suppport page for this problem and they didnt work. When I plug in my 4 GB Mini ipod, it shows up on Itunes so Its not a problem with itunes or the cable.
    SOMEONE HELP PLEASE!!! i would reeeallly like to avoid having it serviced. THank you!
    HP pavilion a250n   Windows XP  
    HP pavilion a250n   Windows XP  
    HP pavilion a250n   Windows XP  

    Welcome to Apple Discussions!
    I would try formatting your iPod then restoring it again. If that doesnt work, just post.

  • Nano not showing up in iTunes

    I plug my nano into the USB port and the folder pops up on my screen, but when I enter iTunes, it won't recognize it. It doesn't show up in the Source collumn as it should. It did the very first time I plugged it in, but now it doesn't. Can someone tell me what I'm doing wrong, or if it is just my nano?

    No. Sad. It still isn't being recognized. I never got the sad face, it just. . . didn't show up in iTunes. I get the folder that pops up when I plug in my iPod via USB port. I read what Mitch said, but none of it worked. I don't understand and it is really making me want to throw this piece away. Do you have any more ideas?
    Oh. When I plug in my iPod, the folder pops up, the screen says 'Do Not Disconnect,' but there should be some sort of symbol in the left hand corner. There isn't. It's there right when I plug it in, but then it goes away. If at all possible, could you explain what to do for me, in easy terms. All this technical talk is only confusing and frustrating me more. Thanks.

  • IPod does not show up in iTunes or My Computer when its plugged in

    I've tried several iPods (all 5th gen 30gig) on my system. The first one I tried worked fine (but sadly wasn't mine!), but none of the others tried since have ever worked, even though they work on other systems.
    The problem is that when I plug the iPod in neither iTunes nor My Computer sees the iPod. The PC knows it's there because the iPod shows up under "Other Devices" in Device Manager. (On a system where the iPod is working properly it shows up as a Disk Drive in Device Manager, by the way.)
    I've tried all the fixes on the Apple support site, working my way through the relevant piece (61711) on the Apple knowledge base. I've also upgraded to iTunes 7 and read the new stuff on similar problems encountered by some people upgrading and tried the fix just posted on the front page of the Apple support site but it didn't work (I got this problem long before upgrading to v7, so I guess it wasn't aimed at my issue.)
    Any ideas?
    Oh and I ran the iTunes diagnostics tool and it generated all this stuff below, which might be relevant - who knows?
    Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
    Dell Inc. Dimension 5000
    iTunes 7.0.0.70
    iPodService 7.0.0.70 is currently running.
    iTunesHelper 7.0.0.70 is currently running.
    Current user is an administrator.
    Connected Storage Devices:
    IDE\DiskMaxtor6Y160M0_________________________YAR51HW0
    Could not get bus type for CD, 50. Problem with installation of drive in Windows.
    , Bus Address [0,0]
    Universal Serial Bus Controllers:
    Intel(R) 82801FB/FBM USB Universal Host Controller - 2658, PCI bus 0, device 29, function 0. Device is working properly.
    Intel(R) 82801FB/FBM USB Universal Host Controller - 2659, PCI bus 0, device 29, function 1. Device is working properly.
    Intel(R) 82801FB/FBM USB Universal Host Controller - 265A, PCI bus 0, device 29, function 2. Device is working properly.
    Intel(R) 82801FB/FBM USB Universal Host Controller - 265B, PCI bus 0, device 29, function 3. Device is working properly.
    Intel(R) 82801FB/FBM USB2 Enhanced Host Controller - 265C, PCI bus 0, device 29, function 7. Device is working properly.
    No IEEE 1394 Host Controller found.

    I've tried several iPods (all 5th gen 30gig) on my system. The first one I tried worked fine (but sadly wasn't mine!), but none of the others tried since have ever worked, even though they work on other systems.
    The problem is that when I plug the iPod in neither iTunes nor My Computer sees the iPod. The PC knows it's there because the iPod shows up under "Other Devices" in Device Manager. (On a system where the iPod is working properly it shows up as a Disk Drive in Device Manager, by the way.)
    I've tried all the fixes on the Apple support site, working my way through the relevant piece (61711) on the Apple knowledge base. I've also upgraded to iTunes 7 and read the new stuff on similar problems encountered by some people upgrading and tried the fix just posted on the front page of the Apple support site but it didn't work (I got this problem long before upgrading to v7, so I guess it wasn't aimed at my issue.)
    Any ideas?
    Oh and I ran the iTunes diagnostics tool and it generated all this stuff below, which might be relevant - who knows?
    Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
    Dell Inc. Dimension 5000
    iTunes 7.0.0.70
    iPodService 7.0.0.70 is currently running.
    iTunesHelper 7.0.0.70 is currently running.
    Current user is an administrator.
    Connected Storage Devices:
    IDE\DiskMaxtor6Y160M0_________________________YAR51HW0
    Could not get bus type for CD, 50. Problem with installation of drive in Windows.
    , Bus Address [0,0]
    Universal Serial Bus Controllers:
    Intel(R) 82801FB/FBM USB Universal Host Controller - 2658, PCI bus 0, device 29, function 0. Device is working properly.
    Intel(R) 82801FB/FBM USB Universal Host Controller - 2659, PCI bus 0, device 29, function 1. Device is working properly.
    Intel(R) 82801FB/FBM USB Universal Host Controller - 265A, PCI bus 0, device 29, function 2. Device is working properly.
    Intel(R) 82801FB/FBM USB Universal Host Controller - 265B, PCI bus 0, device 29, function 3. Device is working properly.
    Intel(R) 82801FB/FBM USB2 Enhanced Host Controller - 265C, PCI bus 0, device 29, function 7. Device is working properly.
    No IEEE 1394 Host Controller found.

  • IPhone not showing up in iTunes or My Computer

    My iPhone 3G is charging when connected to my computer but it's not showing up in the computer or iTunes. Help? I have a Windows Vista and an iPhone 3G with iOS 4.2.1.

    Did you have your original apple cable ?? If not try whit an real apple authentic cable . If yes uninstall iTunes and reinstall iTunes.

  • Ipod not showing up in itunes or on computer

    after updating to itunes 9.1 my ipod will not show up anywhere on my computer. It doesn't even do anything when i plug it in. Although everytime since then a message comes up after logging into my computer about the applesync notifier had some sort of error and CoreFoundation.dll was not found. I re-installed itunes and that didn't help so i uninstalled MobileMe and now the message does not come up,my ipod still doesn't connect though.Any help?

    It sounds like the port or cable is having a problem. First try a different cable.
    If the cable doesn't fix things then try resetting the PMU (Power Management Unit) then see if the iPod will show up.
    MJ

  • Ipod not showing up in itunes or my computer

    My ipod is new (3gen nano) i can't get it to show up in my computer or in itunes i have no device on my left pane of itunes i only have library, store and playlist. i am running windows xp

    hi i also have the same problem as movie star.. n i have tried what u suggested just wondered if you had any other suggestions?! as everything i could thing of tryin doesnt seem to work, and on some of the things apple website tells you to do is so confussin as it says stuff like wen your ipod shows up in itunes, but tat doest happen lol. well if you have any suggestions please share. x
    hp   Windows XP  

Maybe you are looking for

  • When I try to open Firefox I get a message saying it is already open. However it is not open and i cannot access Firefox

    When I try to open Firefox I get a message saying it is already open. However it is not open and i cannot access Firefox

  • Please help me activate my cs3

    I had previuosly used bthe cs3 on my buisness laptop , but it was deactivated and now I am tryiong to install on my new ASUS computer

  • Exception in two places of insert statment

    Hi All, I want to insert exception in two places in pl sql. I am getting the error.Is there a way to implement exception in two places in insert statement. Thanks, uday Begin Declare V_Code Number; V_Errm Varchar2(64); V_Code1 Number; V_Errm1 Varchar

  • Reg: FI - Exit: EXIT_SAPLV60B_004

    Hi, The Exit 'EXIT_SAPLV60B_004' is triggred when Invoice is created or Changed. I have added code in this Exit which need to be triggred only when it is triggred at the time of Invoice creation and not for the Invoice change. How could I identify, t

  • Exp/Imp full database

    Hello guys, I'm having an issue with importing full database from one database(machine 1) to another database (machine2). I am getting errors that users don't exist, datafile cannot be read etc errors. I'm using Windows, and Oracle 9.2.0.6 How can I