Nano not working with FM transmitter

I cannot get my Nano to work with an Itrip or with an in car transmitter/holder/charger. But my friends Ipod works fine with both. Is there a setting that i need to change?

First are you sure the products you mentioned are compatible with the Nano? The nano is not compatible with any of the previews Itrips because it's lack of a remote port. Is the Itrip you are using connecting to the dock connector? If you are connecting with the dock connector than perhaps you need to reboot your Nano (won't remove anything from Nano) bu holding the select and menu button for several seconds.

Similar Messages

  • New Ipod nano not working with my Windows 2000

    I have just bought an ipod nano 8GB, and tried to install it. The latest itunes I can put on my computer is 7.3.2 as it is a Windows 2000 not an XP. Unfortunately the nano is saying it needs 7.4 and above. can anyone help please?

    I wish you would have asked or checked on the tech specifications for the Nano prior to purchase. These are the required tech specs, copied directly from the Nano page. I'm sorry there's nothing you can do.
    # PC with USB 2.0 port
    # Windows Vista or Windows XP Home or Professional with Service Pack 2 or later
    # iTunes 7.6 or later

  • Ipod nano not working with my Ipod / Itunes setup

    I have just bought a 30 GB Ipod and set this up on my Dell Windows XP computer. This works fine and I have been able to synchronise the majority of my music with it.
    At the same time, however, I bought my daughter a 2 gb nano. This I cannot get to work on the same computer, even though it recognises it as a different source. It won't let me set up a specific playlist for the nano, or manually add music files.
    Is there some restriction on using 2 ipods together on one machine that I should be aware of?

    You can use two or more iPods on one computer. There are a couple of methods. Method one is to have two Mac or Windows user accounts which by definition would give you two completely separate libraries. Method two is to set your preferences so that either one or both iPods get updated with only certain playlists within one library. Are you getting any error messages when you try to set up your playlists or drag your music manually?: How To Use Multiple iPods with One Computer

  • My Nike  HRM is not working with my 7th gen Nano

    I got the 7th Gen Nano a few weeks ago and so far I like it very much.  I had a Polar HRM and discovered that my existing HRM transmitter would not
    work with the Nano.  I got the HRM transmitter that says it works with Nike+ and it's not working.  Any suggestions?

    When I plug it in iTunes recognizes my iPod, syncs it, but then the iPod library is grey.
    If the iPod's Music list is greyed out, that usually means the iPod uses automatic syncing.  You cannot change anything directly on the iPod, because you are not manually managing content.  You let iTunes manage the content, based on the settings on the iPod's Music settings screen.
    Select the iPod in iTunes.  In iTunes 12, click the "device button" on the horizontal bar (its icon looks like the device).  The iPod's "management" screen comes up, showing the iPod's Summary settings view.  Is the box for Manually manage music checked or not checked?  If it's not checked, you are using automatic syncing.  In the iPod's sidebar, under Settings, click Music to show the iPod's Music settings screen and set up (or update) automatic syncing for songs.

  • Any ideas why my ipod nano 6th gen is not working with Sony SRSGU10IP docking station pls

    any ideas why my ipod nano 6th gen is not working with Sony SRSGU10IP docking station please ? classic working fine, so not the fault of the station itself ? it's been bought as a present for my father & he's confused !

    Check the headphone jack with a flashlight and clean it if necessary. The jack on a new Nano is very tight, be sure you push the headset jack all the way in, the plastic on the headset jack should be flush with the body of the Nano.

  • Nano 4g will suddenly not work with alarm clock. What happened?

    As of the last time I synced it, my iPod nano 4g will not work with an alarm clock. What happened? It doesn't work with mine or with my roommate's, and her iPod will work with my clock. My iPod will PLAY in the clock dock if I turn it on and hit play, but won't wake up and play anymore as an alarm. I tried setting the alarm on the iPod instead of on the alarm clock, and that doesn't work as a fix (it won't make the clock wake up). ARGH.

    Robert116 wrote:
    Yeah, mine won't work. Just started acting up this week.
    It doesn't work at all. I can set the alarm for any time, and it simply doesn't go off. I got a replacement phone of the same LG Accolade model, and it doesn't work either.
    I switched the clock display settings, thinking there might be a glitch there. Didn't work when I changed it, or when I put it back to my original settings.
    Agh!
    Hi Robert116,
    Please ensure that you have software version VX560V04 installed on your phone. For instructions to view software version please visit this LINK.
    If you do have the correct software version a LG Accolade VX5600 - Master Reset may resolve the alarm clock issues outlined on your post. A master reset will resolve issues if any of your phone's system files became corrupted.
    Please keep in mind that a master reset will erase all data and restore preferences to factory default specifications. Performing a hard reset is only recommended when the existing data has been backed up or is unwanted. Please backup your information before you do a master reset.
    VX560V04

  • External USB HD does not work with HAL:

    External USB HD does not work with HAL:
    From the last 10 days the HAL auto-mount with ntfs-3g file system of my external hard drive  does not woks.
    But the manual mount procedure with the command mount -t ntfs-3g /dev/sdb* /mnt/XYZ works.
    I've followed the instructions in the wiki: http://wiki.archlinux.org/index.php/HAL and the system has worked up to the last kernel or HAL update.
    My fat32 usb-stick works without any problem.
    If I try to open the device with KDE it appears an error popup wit this message:
    TODO: have to rethink extra options
    Error: kio_media_mount_helper
    The log from the kernel.log is
    Nov 6 22:03:16 myhost usb 5-1: new high speed USB device using ehci_hcd and address 4
    Nov 6 22:03:16 myhost usb 5-1: configuration #1 chosen from 1 choice
    Nov 6 22:03:17 myhost Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
    Nov 6 22:03:17 myhost ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    Nov 6 22:03:17 myhost Initializing USB Mass Storage driver...
    Nov 6 22:03:17 myhost scsi6 : SCSI emulation for USB Mass Storage devices
    Nov 6 22:03:17 myhost usb-storage: device found at 4
    Nov 6 22:03:17 myhost usb-storage: waiting for device to settle before scanning
    Nov 6 22:03:17 myhost usbcore: registered new interface driver usb-storage
    Nov 6 22:03:17 myhost USB Mass Storage support registered.
    Nov 6 22:03:22 myhost scsi 6:0:0:0: Direct-Access WDC WD32 00JB-00KFA0 0811 PQ: 0 ANSI: 0
    Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
    Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
    Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
    Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
    Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
    Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
    Nov 6 22:03:22 myhost sdb: sdb1
    Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Attached SCSI disk
    Nov 6 22:03:22 myhost sd 6:0:0:0: Attached scsi generic sg2 type 0
    Nov 6 22:03:22 myhost usb-storage: device scan complete
    and the error.log is
    Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
    Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
    Do you have some idea ....
    Bye.

    I have done the following:
    Downloaded the patched hal version.
    used makepkg in /abs/local/trunk/ to create a pkg for pacman
    used sudo pacman -U pkgname to install it.
    used sudo nano /etc/hal/fdi/policy/preferences.fdi to create the fdi file with the following content:
    saved the file and removed my ntfs entryes from fstab and rebooted. and still there is no automount off ntfs partitions.
    have i done something wrong?
    br fjodork
    WARNING: what follows is a guide of what did work for me, I'm still in an early stage of learning linux, so please correct me if anything of what follows is wrong/dangerous/stupid. As I said, this worked for me, it's not pretty, since I was learning each step on the fly and I'm sure there are better ways to do this.
    So fjodork, you seem to have done the the necessary steps, though i couldn't get it to work until i first removed hal without dependencies
    pacman -Rd hal
    it will give you some warning about the dependencies, ignore  it since we are reinstalling hal in a few steps.
    First i tried to follow Raymano's link, obviously it showed me nothing in the browser so I thought it might be a broken link.
    So I downloaded the source tarball from here http://hal.freedesktop.org/releases/hal-0.5.10.tar.gz
    unpacked it changed the /tools/hal-storage-mount.c as per Milfadoodle's instructions.
    at first I tried to compile directly from source, the process would finish without a glitch though after reboot nothing changed, as if hal weren't
    installed, i guess there were issues with paths. anyway read on
    Then repacked the source in tarball, copied it to /var/abs/extra/system/hal and modified the PKGBUILD as follows
    makedepends=('pkgconfig' 'gperf')
    options=('!libtool')
    install=hal.install
    source=(${pkgname}-${pkgver}.tar.gz #removed url so makepkg looks in the current directory for the tarball
        hal
        hal-policy.patch
        cryptsetup_location.patch
        hal-0.5.9-hide-diagnostic.patch
        ntfs3g-valid-options.patch)
    md5sums=('6641c30a27c00485c6accac5110ff911' # replace with md5sum of your package's sourceball (run md5sum filename)
             '882f67668cb14a0a9e4a27ef22278027'
             '5ba8b610aa9763a5f42b9f7cbd7a86ad'
    then makepkg (i had to add --asroot, don't ask why
    and finally pacman -U hal-0.5.10-1-i686.pkg
    another reboot and everything worked without a glitch!:D (yeah i know i still haven't got rid of the reboot mentality )
    I have also put the policy files as per the wiki instructions.
    PS: I know this is a dirty way to getting things done but as i said, I'm just starting
    If anyone could comment/correct/explain this post I'd be more than happy, the automount issue was bothering me for about a month now (you'll say why do I need ntfs in the first place? well, I only recently switched for Linux as my primary OS, these are some relics of the M$ era

  • Will a ipod nano charger work with a new ipod touch?

    will a ipod nano charger work with a new ipod touch?

    If you want to charge a touch gen 4 or less, then absolutly (It just might take a little longer than one specifically for the touch, because of watt dierences I think). I'm not sure about gen 5

  • Apple tv not working with panosonic TH-50PX75U old.

    Apple tv not working with a 3-4 year old Panasonic TH50PX75U tv, works fine on all other tv's in the house. HDMI cables seem to be fine they work with the DVD and DVR. Ratio is set to auto, apple logo on screen when booting up then Goes away. Seen twice for a split,nano second the apple tv menu on screen. Then in upper left corner of tv a grey box appears with HDMI 2 appears. any help would be great... Thanks in advance, Tom

    I had a similar issue, without the actual error message. If you can't get it running at all, you will be forced to do what I, and many others have done over the past 24 hours. You can restore your Apple TV to factory settings (you will then have to enter your ID, passwords, etc., to connect everything again--sigh--) by obtianing a Micro-USB cable (found one today at Best Buy for 5 bucks, available other places that sell electronics, etc.) disconnect your Apple TV, and connect it via the micro usb cable (which attaches in the back of the ATV) to your computer, plug the ATV power cord into the wall and open iTUnes. You can click the Apple TV on the left side of iTunes and click restore--it will not take too long on a decent internet connection, and it will automatically install the software update (you have no choice on this, BTW, you can't go back to the previous software, as Apple only supplies the new software online (sadly).  Your ATV 3 should work and you can put it back to your TV and re-enter all your info and enjoy the new features. But if you are like me, you won't enjoy AirPlay, something seems to be wrong with that if you use an iPhone or iPad and have updated to IOS7--not sure which is the problem, or both, but be prepared for a little more frustration, but at least your ATV 3 will "work" mostly as it did before.
    I hope this helps, it is frustrating, but it is resolveable with a little bit of time--not that I'm happy about it, either.

  • Ipod touch and nano not recognised with itunes

    Hi
    I updated my itunes yesterday.  I have a new shuffle (4th gen I think) but 4th gen nano and 2nd gen touch.  Itunes recognises my shuffle no problem and I was able to sync ok, but it won't recognise the touch or nano, I tried 2 different usb cables but still won't recognise, is it something to do with older gen models not working with the new itunes??? I have a fairly new computer running off new windows package.  Itunes was recognising all my ipods until I installed the new itunes.  Any help gratefully received.
    Thanks.

    It sounds to me like an issue with your iTunes, try un-installing the software and re-installing it and see what happens then. It seems a little odd that it won't recognise 2 iPods, so I highly doubt it is the iPods' fault.
    If it deosn't work after re-installing, take it to the Apple Store (with your computer, if it is portable) and they should be able to help out

  • I have recently upgraded my iMac Intel G5 iSight to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old sys parts

    I have recently upgraded my iMac Intel G5 iSight (iMac5,1) to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old system parts. I have zapped PRAM. The blue indicator in system audio panel will appear for a second as I slide the bar for internal mic but then it disappears. Is there a fix?

    The sound seems very faint but can here static on playback.

  • My operating system windows XP not working with photoshop cloud, why not?

    I need to add 2 more licences for photoshop cloud and I'm being told my operating system windows XP does not work with Photoshop cloud. We already have 2 pcs using it in our office so why not?
    Please help
    Roy

    Do you have the latest version of iTunes?  If not, get it at:
    http://www.apple.com/itunes

  • Adobe creative cloud eea 1.5 is not working with our asus Eee box , celeron j1900 2.00 ghz, 4gb of ram, 64bit. can settings be changed in adobe?

    adobe creative cloud eea 1.5 is not working with our asus Eee box , celeron j1900 2.00 ghz, 4gb of ram, 64bit. can settings be changed in adobe?

    A chat session where an agent may remotely look inside your computer may help
    Creative Cloud chat support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html

  • Application is not working with mouse

    Dear All,
    We have a strange issue in the our application (Oracle form) in the one of our client machine.
    Some times the forms are not able to work with the mouse but is able to work with the keyboard. After one or two machine restart its again working. When the issue occur we can able to work in other applications using mouse.
    Our Applications server is in Other country and client are accessing from India.
    This occurs for some user and not for all.
    Application server Version          10.1.2.0.2.
    Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit
    Java Plug-in version 1.6.0_31 .
    Please any info will help us lot.

    Thank you for the quick replies Michael Ferrante and HamidHelal.
    But since its occurring for some users (perticulary indian users) and some times. And also its occurring in production environment not in development environment.
    Even the java control panel is not working with mouse.
    For other country customers everything working fine.
    So its difficult for me to apply the patch with these uncertainties.
    Checking with fresh java installation and let you know the status.
    Thanks.

  • Voice Memo is not working with iOS 8.2

    Voice Memo Records is not working with iOS 8.2. how to fix it?

    Voice Memo Records is not working with iOS 8.2. how to fix it?

Maybe you are looking for