Nano on WMP files copied but nowhere to be seen help!!

Set my nano up..went like clock work. It identified my files on WMP,copied them..bimgo I thought.Thing is I can't find them in my itunes programme.
Anyone out there who can help me find them..please

Hi Eric,
Thanks for responding.
Unfortunately, no I can't see it. The only note there is one that was on there before I traveled.
Jill

Similar Messages

Robocopy Log Shows All Files Copied but Folder Properties Different on Source and Target

Hi,
I'm replacing an old 2003 R2 server with a 2012 R2 server and moving data to it. I used robocopy to migrate data. No users are currently accessing the source so there are no open files by users.
The source folder is:
27.9 GB with 194,490 files and 14,273 folders.
Robocopy copied the data and reported no errors but the destination folder only has:
24.6 GB with 181,487 files and 14,167 folders.
I ran robocopy twice more. Each time, the log shows that it skipped 14,273 directories and 194490 files.
So robocopy believes the source and destination directories are in synch. But the properties of the directory show me different numbers. Any ideas? I need to move a few more TB of data and be confident that everything copied.
Here's the command I'm running:
robocopy \\server-old\d$\data \\server-new\d$\data /E /COPYALL /DCOPY:T /R:5 /W:3 /TEE /V /LOG:D:\Logs\log1.log
Thanks,
Greg

Hi,
Thanks for your post.
As far as i know, system Volume Info and Recycler are NOT transferred when you use robocopy to transfer all the files/folders from one drive to another.
And Robocopy has switch "/MIR" which you can use to Mirror a complete directory tree if required.
https://technet.microsoft.com/en-us/library/cc733145.aspx?f=255&MSPPError=-2147217396
Regards.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

IPod Nano 6th generation is decteded but could not be identified - help!

I have a iPod nano 6th generation and until this morning it worked fine with iTunes
Today when I plugged it in I get the following message... iPod is detected but could not be identified properly...
I have already
1. reinstalled iTunes
2. Tried other USB wires
3. Restarted the computer
HELP!!!!

1. reinstalled iTunes
Doublechecking. Have you tried a complete uninstall of both iTunes and all the other related software components and then a reinstall? If not, try the instructions from the following document:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8

Lr Beta Mk 11 announced in UK - but nowhere to be seen

Digital Photography Review announced release of a 3 Beta update at 0940 Z this morning - but the link to the download just goes to the original Labs page. If DPR is right it will dash the hopes of many for a near release of Lr 3 proper. They also hint at the new Beta including import and management of video files - which if correct shows how little notice is taken of this forum. No mention of soft proofing - although that doesn't mean it will not feature in the final release. Link to DPR:
http://www.dpreview.com/
http://www.dpreview.com/

Covered in some detail on the Beta forum itself.
http://forums.adobe.com/community/labs/lightroom3

Ipod nano 7th recognized by itunes but not turning on! help!

Hello,
I bought an ipod and the screen is not turning at all. I have tried to hold the wake/sleep button and the home button at the same time but the apple log is not coming up at all. Itunes is recognizing my device and i was able to reset my ipod completely but still nothing on the screen. I charged it throughout the night and still no good. Any advice? or did anybody experiece this with the new ipod? help please

If its brand new and doing this, return it with receipt.

Items not copied but computer IS authorised. Help please.

Error message on synch always reads: "some of the items in the itunes library ...were not copied to iphone because you are not authorised fro them on this computer.
I jhave authorised the computer, repeatedly.
Any ideas how to solve this?
All I can think of is that some of the tiems were purchased long ago using a idfferent apple ID where I no longer have all the passwords and cant receive emails anymore.

Open About this Mac from the Apple menu.
Look for the Serial number (I think it can be found by clicking on the Version number twice). If not there, click More Info…
The Serial number will be in the Hardware Overview.
If the Serial number is missing, that may be the problem. However, I don't know how to fix it.

Installed extension but nowhere to be seen

I installed a Flypaper extension and it shows up in extension manager
But I can't find it anywhere.
Window > Extensions is greyed out.
How can I get the extension to work?
Windows 7 -64, Photoshop CC 2014.
Thanks
Ronald

Any chance you have this unchecked?
Also, have you closed and reopened Photoshop after the installation? I don't know that that's necessary as I don't use extension panels myself, but it seems like a good thing to try.
-Noel

Hey guys I need help for adobe premier i deleted this file amtlib but it wont open pleaase help me give me a download link for the file amtlib HELLLPPP

2014 premier pro helppp please

Discussions of RE-installing
-http://helpx.adobe.com/creative-cloud/help/install-apps.html
-using the cleaner after uninstalling and before reinstalling will usually help
-http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

I am trying to help my mother build her iTunes library. I want to transfer files from my iTunes to hers. I have tried HomeSharing, but the "Show/Import" menu buttons are nowhere to be seen on either of our computers. We have PCs, not MacBooks.

I want to import some of my iTunes files to my mother's iTunes account so she doesn't have to pay again to get them. We are going on a trip soon, and she wanted some movies to watch on here iPad. Some of the movies, I already have. I can't seem to do anything. Homesharing has been useless, because while her iTunes can 'see' my iTunes and vice versa, the magic "Show" and more importantly the magic "Import" buttons are nowhere to be seen. How in the **** am I supposed to share my files if I can't import them to her library for her? I have seen many solutions for people using iTunes on a MacBook, but we don't have MacBooks in our house. I have a Samsung laptop and Mom has a Gateway laptop, and both operate on Windows 7. Seriously. This should not be impossible, but right now, it seems that way. Does anyone have any suggestions?

Will iTunes allow me to do this? I'm not really all that familiar with Windows computers. I have recently had to move to a PC because my $3000 macBook Pro died one month after the warranty was up. How could I get iTunes to accept media from another computer?

I just got a new MacBook Pro, and I tried to bring across my files from my last mac using time machine. After it was done copying I can't find my files anywhere but the space (about 130gb) has been used on my hard drive. Help please!!

I just got a new MacBook Pro, and I tried to bring across my files from my last mac using time machine. After it was done copying I can't find my files anywhere but the space (about 130gb) has been used on my hard drive. Does anyone know how I can get to them? I did change my user name from 'user' while it was copying, could this have something to do with it?

You don't want to do that by copying.
Your best bet, by far, is to use Setup Assistant. If your Mac is running Snow Leopard, see Using Setup Assistant on Snow Leopard or Leopard.
If it came with Lion, it's a bit different: Using Setup Assistant on Lion

HT1351 I've encoded a vinyl LP record into digital format and recorded it onto an usb as MP3 file. But when I tried to copy it onto my ipod classic, I get a message stating "was not copied to the ipod because it cannot be played on this ipod". Why?

I've encoded a vinyl LP record into digital format and recorded it onto an usb as MP3 file. But when I tried to copy it onto my ipod classic, I get a message stating "was not copied to the ipod because it cannot be played on this ipod". Why?

I was refering to the "sample rate", normally 44.1 KHz, the iPod might not be able to play tracks with a non-standard rate. Otherwise I'm not sure what the issue might be.
tt2

Storage Spaces: Virtual Disk taken offline during file copy, marked as "This disk is offline because it is out of capacity", but plenty of free space

Server 2012 RC. I'm using Storage Spaces, with two virtual disks across 23 underlying physical disks.
* First virtual disk is fixed provisioning, parity across 23 physical disks: 10,024GB capacity
* Second virtual disk is fixed provisioning, parity across the remaining space on 6 of the same physical disks: 652GB capacity
These have been configured as dynamic disks, with an NTFS volume spanned across the two (larger virtual disk first). Total volume size 10,676GB. For more details of the hardware, and why the configuration is like this, see: http://social.technet.microsoft.com/Forums/en-US/winserver8gen/thread/c35ff156-01a8-456a-9190-04c7bcfc048e
I'm copying several TB from a network share to this volume. It is very slow at ~12MB/sec, but works. However, three times so far, several hours in to the file copy and with plenty of free space remaining, the 10,024GB virtual disk is suddenly taken offline.
This obviously then fails the spanned volume and stops the file copy.
The second time, I took screenshots, below. The disk (Disk27) is marked offline due to "This disk is offline because it is out of capacity". And the disk in the spanned volume is marked as missing (which is what you would expect when one of its member disks
is offline).
I can then mark the disk (Disk27) back online again, and this restores the spanned volume. I can then re-start the file copy from where it failed. There doesn't appear to be any data loss, but it does cause an outage that requires manual attention. As you
can see, there is plenty of space left on the spanned volume.
Each time this has happened, there are a few event 150 errors in the System event log: "Disk 27 has reached a logical block provisioning permanent resource exhaustion condition.". Source: Disk.
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="disk" />
<EventID Qualifiers="49156">150</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2012-06-07T11:24:53.572101500Z" />
<EventRecordID>14476</EventRecordID>
<Channel>System</Channel>
<Computer>Trounce-Server2.trounce.corp</Computer>
<Security />
</System>
- <EventData>
<Data>\Device\Harddisk27\DR27</Data>
<Data>27</Data>
<Binary>000000000200300000000000960004C0000000000000000000000000000000000000000000000000</Binary>
</EventData>
</Event>
This error seems to be related to thin provisioning of disks. I found this:
http://msdn.microsoft.com/en-us/library/windows/desktop/hh848068(v=vs.85).aspx. But both these Virtual Disks are configured as Fixed, not Thin provisioning, so it shouldn't apply.
My thoughts: the virtual disk should not spuriously go offline during a file copy, even if it was out of space. And in any case, there is plenty of free space remaining. Also, I don't understand the reason for why it is marked as offline ("This disk is offline
because it is out of capacity"). Why would a disk go offline because it was out of thin capacity, rather than just returning an "out of disk space" error while keeping it online.

Interesting Thread, I've been having the same issue. I had a failed hardware RAID that was impossible to recover in place, so after being forced to do a 1:1 backup, I find myself with 5 2TB hard drives to play with. Storage Spaces seemed like an interesting
way to go until I started facing the issues we share.
So my configuration is A VM Running Windows Server 2012 RC with 5 Virtualized Physical drives using a SCSI interface, 2TB in size that make up my storage pool. A Single Thinly provisioned Disk of 18 TB (using 1 disk for parity)
Interestly enough, write speed has not been an issue on this machine (30~70MB/s, up from 256k on the beta)
Of note to me is this error in my event log 13 minutes before the drive disappeared:
"The shadow copies of volume E: were deleted because the shadow copy storage could not grow in time.Consider reducing the IO load on the system or choose a shadow copy storage volume that is not being shadow copied."Source: volsnap, Event ID: 25, Level: Error
followed by:
"The system failed to flush data to the transaction log. Corruption may occur in VolumeId: E:, DeviceName: \Device\HarddiskVolume17.(The physical resources of this disk have been exhausted.)"Source: Ntfs (Microsoft-Windows-Ntfs), Event ID: 140, Level: Warning
I figure the amount of space available to me before I start encountering physical limits is in the vicinity of about 7TB. It dropped out for the second time at 184 GB.
FYI, the number of columns created for me is 5
Regards,
Steven Blom

Before, when reading PDF files, I was able to copy and paste part of the book. Now it is not possible. I can copy but when pasting gets nothing. Antes, quando lia arquivos PDF, eu conseguia copiar e colar parte do livro. Agora isso não é possível.

Before, when reading PDF files, I was able to copy and paste part of the book. Now it is not possible. I can copy but when pasting gets nothing.
Antes, quando lia arquivos PDF, eu conseguia copiar e colar parte do livro. Agora isso não é possível. Eu consigo copiar, mas quando vou colar o texto, não cola nada.

Caro Fabiano,
Obrigado por ter contactado as Comunidades de Suporte Apple.
Na origem do seu problema podem estar várias causas. Nomeadamente:
O ficheiro (arquivo) que está a ler pode não ser texto, ou seja, pode ser texto transformado em imagem e exportado como PDF.
A aplicação de destino (onde está a tentar colar o texto copiado) pode não aceitar a colagem de texto formatado.
A aplicação que está a utilizar para abrir os ficheiros PDF pode não ser indicada para certo tipo de documentos. Experimente o iBooks, o Dropbox ou até mesmo o seu e-mail.
No caso de nenhuma destas causas estar na origem do seu problema, forneça, por favor, mais informações sobre a origem do ficheiro (descarga pelo Safari, Mail ou outro) bem como o destino (documento Pages, Keynote ou Numbers ou outra aplicação que não o iWork).
Atentamente,
Gonçalo Matos
Estou aqui para ajudar. Clique no botão "Reply" no caso de ter outra questão ou necessitar de outro esclarecimento para que eu possa ajudar da melhor forma que conseguir.

Transfered files from Mac Pro to iMac OS10.7. Copied bookmarks using "backup and restore" from "Organize bookmarks". File copied correctly as bookmarks 10-10-11.jsom, but would not restore on new iMac.

Transfered files from Mac Pro to iMac OS10.7. Copied bookmarks using "backup and restore" from "Organize bookmarks". File copied correctly as bookmarks 10-10-11.jsom, but would not restore on Firefox on new iMac.

Firefox 2 versions use the file bookmarks.html to store the bookmarks.
See http://kb.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox
See also http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
With Mac OS X 10.4 you can use Firefox 3.5 or 3.6
* http://www.mozilla.com/firefox/all.html
* http://www.mozilla.com/firefox/all-older.html
*http://www.mozilla.com/en-US/firefox/system-requirements.html
*http://www.mozilla.com/firefox/system-requirements-v3.html

Group Policy Preferences File Copy - Access is Denied on 2003 but not 2008 R2

Hello,
I have created a GPO which copies a file from a network share into a new folder under Program Files. This policy works just fine on a Windows 2008 box, but not on 2003. I've used "psexec -i -s cmd.exe" to verify system account permission to the
share. I am able to successfully browse and copy files from the share as the system account on both boxes.
However, when the GPO attempts to perform the file copy, it does not work, and generates the following error message:
Event Type: Warning
Event Source: Group Policy Files
Event Category: (2)
Event ID: 4098
Date: 8/28/2013
Time: 3:32:12 PM
User: NT AUTHORITY\SYSTEM
Computer: Server01
Description:
The computer 'file.txt' preference item in the 'TXT File Copy {9176122B-1A50-4AB8-91D9-6E8553727E18}' Group Policy object did not apply because it failed with error code '0x80070005 Access is denied.' This error was suppressed.
I am trying to avoid writing a login script, so I am hoping someone will be able to help me figure out why this works fine on Windows 2008 but not Windows 2003. Please note file names and paths are modified here for security reasons, but the principle is
the same.
My GPO is:
Computer Configuration\Preferences\Windows Settings\Files
File (Target Path: c:\Program Files\path\to\file\file.txt)
Source file: \\share\path\to\file\file.txt
Destination File: c:\program files\path\to\file\file.txt
Action: Update
Suppress errors on individual file actions: Disabled
Read-Only: Enabled
Hidden: Disabled
Archive: Enabled
Stop Processing items on this extension if an error occurrs on this item: No
Remove this item when it is no longer applied: No
Apply once and do not reapply: No
Item-level Targeting: None
Thanks

As a user, I am able to browse the share just fine using the alias. It is only when I try to access the share using the system account that I encounter a problem.
experiencing the exact same symptoms. in the tests below, server, client1, and client2 are all are native instances of microsoft windows server.
server: windows server 2008 R2 standard SP1
client1: windows server 2003 standard SP2
client2: windows server 2008 R2 standard SP1
registry setting "DisableLoopbackCheck": unconfigured on server; unconfigured on client1; unconfigured on client2
registry setting "DisableStrictNameChecking": configured as "1" on server; unconfigured on client1; unconfigured on client2
domain user on client1 attempt to access server by name: success
domain user on client1 attempt to access server by alias: success
domain user on client2 attempt to access server by name: success
domain user on client2 attempt to access server by alias: success
local system on client1 attempt to access server by name: success
local system on client1 attempt to access server by alias: failed (system error 5 has occurred. access is denied.)
local system on client2 attempt to access server by name: success
local system on client2 attempt to access server by alias: success
all tests done using "net view \\target", but similar results were seen when using "dir \\target\share" which the domain user and local system account have access to.
the differing behavior between client1 and client 2 suggests that server 2003 requires additional configuration to allow its local system account to access an SMB share by alias.
this problem prevents group policy features (such as software installation) from an aliased file server.

Nano on WMP files copied but nowhere to be seen help!!

Similar Messages

Maybe you are looking for