Nano Problems Turned it on, worked fine. Later never worked help!

Please help, everyday I got to school listening to my ipod. It is a nano, well i was listening to it perfectly and turned it off and kept it on the hold button. After school was over i decided to turn it back on, and nothing happened. Except I saw half of the apple logo and thats it. I guess it wasnt a good Idea to keep it in my bookbag, but i really need to get it fixed. I tried restarting it, holding it for 6-10 seconds and all, but it doesnt help! Please PLease PLease is there anyone out there that can help me?
  Windows XP  

And I have tried the whole section on "My Ipod wont turn on" just incase that helps, i also noticed that it is a fequent problem. Makes you wonder on Apple's manufacturing

Similar Messages

  • My iphone 5s 16 gb has an camera problem, turn the camera on tap all green, please help me

    My iphone 5s 16 gb has an camera problem, turn the camera on tap all green, please help me

    Hi teejayfs,
    Thanks for visiting Apple Support Communities.
    If you've noticed unexpected behavior with your iPhone camera, start with these steps to isolate or resolve the issue:
    Camera isn't functioning or has undesired image quality
    If the screen shows a closed lens or black image, force quit the Camera app.
    If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
    Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
    Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
    Try turning iPhone off and then back on.
    Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
    Try to remain steady while focusing:
    Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.
    Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
    Video: Adjust focus before you begin recording. You can also tap to readjust focus while recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll.
    Note: Video-recording features are not available on original iPhone or iPhone 3G.
    If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
    You can find these steps here:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Regards,
    Jeremy

  • 16 gig nano problem- nike+ did not work when photos were loaded by iTunes.

    I recently got a lovely new purple nano for my birthday which appeared to work fine right out of the box. I let iTunes fill it up with a random selection of music and then there was no room for photos, but that was fine.
    I used it for 5 runs without problem, but today, every time I tried to start a workout, the nano would reset itself. Luckily I could revert to my trusty old nano.
    The first 4 runs had taken place without much customisation of the nano, and then I decided to choose my own music instead of having iTunes do it for me, but I also let iTunes choose and load photos on it. The 5th run seemed to work ok after this customisation, but that was it, attempting another run made the nano reboot itself.
    I have since deleted all the photos and Nike+ worked just fine again. I then chose to upload just a few photos, instead of letting iTunes fill the nano up, and again Nike + is working fine. So I've fixed my own problem, but thought I would post in case anyone else is having similar problems

    Jochemd,
    Since Black Monday, I have now deleted cookies, cleaned the cache and deleted all Temp Internet files 4x. I am on IE7.0.5xxx.x, on an XP-Pro SP3 laptop. All of the problems mentioned in my original post have continued, totally unabated.
    If you have a suggestion for me, please share it. I will try about anything now.
    Please note that, related to my OP, everything worked perfectly on Sunday PM, and well into the day on Black Monday. Since then, the issues that I outlined haver been present, and have not changed. The issue is not on my part, though I will attempt to correct anything on my end.
    The pleasure of helping others in these fora has been greatly diminished. I'd guess that about 10% of my posts used to include screen-caps, to direct the various posters, to the correct Panel, switch, Tool, or fly-out menu, to solve their problem. Now, all of my screen-caps have to go to queue. I have about 1500 of them in my Adobe folder, and add more, as the questions come.
    I can live with having to do Block Quotations a half-dozen times, and can Backspace out of those line breaks, but my camera icon is part of my life. Over in the PrE forum, I posted on Saturday afternoon, and that image just came out of queue tonight! Think about some poor Adobe user, lookng for the fix to their problem, with maybe a family event, at which they are hoping to present a DVD, and my answer has been in queue for 2.5 days.
    We do, what we do, with little thanks, and no remuneration, and it should behove Adobe to help us, help other users - ones who have given Adobe their $, and only want their program to function. We, the forum subscribers, can often help them, and save the bacon. That is something that the current Adobe T/S cannot do. Maybe next quarter, but not yet.
    Please help me to help others in the product fora.
    Hunt

  • I-pod nano click wheel does not work help!

    Hi,
    My i-pod nano 1st gen click wheel will not work i have tried restoring,restarting and all the 5 r's but still nothing has happened... there has to be a solution out there somewhere o yea i have also tried taking out the gunk in the click wheel but nothing HELP!

    Version in the nano is 1.1; iTunes is 6.0.4.2.
    This silly thing "healed itself" the next morning (?!), worked fine for two days, and decided to show the same symptoms this evening, then began working fine again.
    Whether it is working or not I can feel the click of the wheel but unit shows no response when the problem is manifesting. So if I am having the problem I can press the wheel any which way for as long as I like and nothing happens -- screen does not light up, unit doesn't scroll, play/pause gives no response, etc.
    HP laptop Windows XP

  • My iPod Nano 3rd generation is not working HELP!!!

    I was listening to my iPod in the car, and right after i watched a music video, it stopped working!! First, i couldn't see the album artwork on the coverflow, and then, when a watched a video, nothing happened. I listened to a song, but it didn't work! I turned it off for a while and still it didn't work. My guess is that my earphones had something to do with it, because when i got home, only one side was working!! I need help ASAP!!!!!! Thanks for reading my problem!!!!

    First of all this is the wrong forum. You need to repost in this forum http://discussions.apple.com/category.jspa?categoryID=154
    Second I would try and restore your Nano.

  • Hello I just found a problem with my Ipod nano 6th generation. It worked fine an hour ago but then the screen turned a dark grey. Did the restore through Itunes and then it went white. But now it's totally unresponsive and seems to be off even when it is

    Hello I just found a problem with my Ipod nano 6th generation. It worked fine an hour ago but then the screen turned a dark grey. Did the restore through Itunes and then it went white. But now it's totally unresponsive and seems to be off even when it is plugged into itunes. Can't even restore it. I get Error 1415?

    Hi clarity,
    Welcome to Apple Support Communities.
    You may want to first try removing and reinstalling the latest version of iTunes by following the steps in this article:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    http://support.apple.com/kb/HT1923
    If you continue to receive the error message when connecting your iPod, see this article for more troubleshooting tips:
    iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    http://support.apple.com/kb/TS1814
    Best,
    Jeremy

  • Wifi problem: I have a airport wifi the small one with one port for modem. My Problem is airport wifi works fine however when I power off my IMac then power it up later on It does not show a connection I then have to manual do it my self it's a pain and n

    I have a airport wifi the small one with one port for modem. My Problem is airport wifi works fine however when I power off my IMac then power it up later on It does not show a connection I then have to manual do it my self it's a pain and never happened before I have tried resetting the airport unit but still no luck please help.
    Thank you
    Roy from malden

    Hi Roy, this has worked for a few...
    Make a New Location, Using network locations in Mac OS X ...
    http://support.apple.com/kb/HT2712
    10.7 & 10.8…
    System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
    10.5.x/10.6.x/10.7.x instructions...
    System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
    The interface that connects to the Internet should be dragged to the top of the list.
    Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.

  • Ok one day out of the blue my ipod just stopped working it wouldnt turn on nothing but after recovering it, it's fine now but there is only one problem my screen wont work i can't do anything on it not even unlock it please someone help!!!!

    Ok one day out of the blue my ipod just stopped working it wouldnt turn on nothing but after recovering it, it's fine now but there is only one problem my screen wont work i can't do anything on it not even unlock it please someone help!!!!

    Try the following:
    - A reset. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory settings/new iPod.
    If you still have the problem that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order

  • IPod Nano Problem with Turning On

    Right I've got a bit of a problem with turning on the nano. I know it works because when its on it's fine, but if its off for a while (i.e. 30 mins or more) and I go to press play or whatever, nothing happens. But if I press any of the buttons about 100 times it will come on and work fine.
    Has anyone had this problem and know if there's anything I can do about it. It seems like the buttons don't work properly, but it can't be that because they work when its on.
    Here's what I know it's not:
    Battery (its full)
    In need of a restore (tried that)
    Reset (tried that)
    In need of new software (just put the latest on)
    So any help would be greatly appreciated.
    Cheers.
    Oh also, completely off subject just trying to kill 2 birds with one stone, how do you do backwards deletes on a mac (i.e. what the 'del' button does on a PC)?

    AliasailA, you are kidding, right??
    You cannot use someone else's serial number or Apple Care Plan--it doesn't work that way.
    I noticed you had another post that said the mini was given to you and has a "sad face icon" and out of warranty. Hummmm.
    You really have to send that mini in for repair/replacement or consider it a lost cause. Maybe it is time to buy an iPod Nano for yourself.

  • Suddenly I can't burn any tunes to disc.  I receive an error report - 4280.  What's the problem?  It all worked fine last week.

    Suddenly I can't burn any turnes to disc.  I receive an error report - 4280.  What's the problem?  It was all fine last week.

    Additional information: 
    -also ran "Repair" with new download of iTunes
    -am using the same spindle of CDs that worked perfectly a month ago.  Tried another brand also to be safe.  None worked.
    -ran CD/DVD diagnostics within iTunes with Apple Care - no issues apparent
    -also tried write-speed 20X on advice of Apple Care (don't know why they thought 20X would be the magic number after the other 3 I tried didn't work)
    -tried running itunes in another user account on the computer - same problem, same error code
    -Apple suggested it was a copyright issue.  I can't even burn music that I created/recorded myself, so that doesn't make sense.
    -They thought maybe Quicktime wasn't installed properly, so we checked a film in Windows Media - it played, meaning Quicktime was fine apparently. 
    Solution:
    Unclicked CD text option & Sound Check, ran burn from the File drop down menu (max speed) on a Philips CD-R and it worked!  Had been right clicking the playlist name and selecting Burn option from there.  That being said, it did not work on 2 other brands prior, with same settings.  Not sure why.  Just happy it's working again. Is it a brand issue?

  • My MacBook Pro will not connect to my home wifi but will connect everywhere else. My other Apple devices (I-pad, I-touch, another MacBook Pro) connect to the router without problems. It was working fine but all of a sudden stopped working.Thanks!

    My MacBook Pro will not connect to my home wifi but will connect everywhere else. My other Apple devices (I-pad, I-touch, another MacBook Pro) connect to the router without problems. It was working fine but all of a sudden stopped working.Thanks!

    try this.
    get back into your router's settings and start deleting devices that are not connected to your router.
    you can also delete the ones that are connected - they'll connect again.
    on the DHCP side of it, increase the amount of users that can connect/log in to your router.
    see if that sorts it out for you.
    good luck.

  • Iphone 5 got wet last week.  Been in rice until today.  It turned on and worked fine, I could see a water spot in the middle but still worked fine, 3 hours in it shut off to black screen with apple logo.  Any ideas what to do?

    Iphone 5 got wet last week.  Been in rice until today.  It turned on and worked fine, I could see a water spot in the middle but still worked fine, 3 hours in it shut down to the black screen with apple logo.  Screen stays up for 10 seconds ago and then goes black and then black screen with apple logo comes back.  Any ideas what to do?

    At this point it's likely that the iPhone has suffered damage and you'll have to take or send it to Apple for replacement. If you have AppleCare+ coverage on the iPhone, the cost will be US $49. Otherwise the cost will be US $229.
    Regards.

  • Sometimes I get a message that reads " UNSUPPORTED Accessory is not supported" when I plug in my bluetooth transmitter to my gen 6 nano. Other times it works fine. Is there a fix for this?

    Sometimes I get a message that reads " UNSUPPORTED Accessory is not supported" when I plug in my bluetooth transmitter to my gen 6 nano. Other times it works fine. Is there a fix for this?

    Have you checker the connectors on both the transmitter and Nano for any signs of damaged, corroded pins?  It might help to take a can of compressed air to each.  The error message may be simply a result of the iPod Nano not getting a full connection with the transmitter at first.
    B-rock

  • I seriously don't know what caused this to start being a problem until today it worked fine, but I added an exception for popups full question in DETAILS

    is there anyway to allow Firefox to allow pop ups from this 1 page of Facebook / well this 1 game https://apps.facebook.com/vampiresdarkside/ and not the entire pan in the Ass Pop up happy site, I cant see any sense in allowing popups from all
    apps.facebook.com
    and when I try to add it as the exception should be your program edits it to be that crap above instead of the exception I entered specifically,
    apps.facebook.com/vampiresdarkside/
    I seriously don't know what caused this to start being a problem until today it worked fine, but I added an exception for popups from this one site in Chrome and Firefox decided it wouldn't allow it popups from this part of Facebook and no I am not allowing all the FB apps to have popups I never had to before
    apps.facebook.com/vampiresdarkside/
    have popups after adding the popup exception in chrome, and no I did nothing to Firefox but it is kinda asking me to switch to Opera or some other crap browser with it acting like this, I modified the exception in chrome and Firefox now wont allow the pop ups it always had up until chrome allowed them WTF

    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
    *Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
    *Do NOT click the Reset button on the Safe Mode start window
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    Do a malware check with several malware scanning programs on the Windows computer.
    Please scan with all programs because each program detects different malware.
    All these programs have free versions.
    Make sure that you update each program to get the latest version of their databases before doing a scan.
    *Malwarebytes' Anti-Malware:<br>http://www.malwarebytes.org/mbam.php
    *AdwCleaner:<br>http://www.bleepingcomputer.com/download/adwcleaner/<br>http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
    *SuperAntispyware:<br>http://www.superantispyware.com/
    *Microsoft Safety Scanner:<br>http://www.microsoft.com/security/scanner/en-us/default.aspx
    *Windows Defender:<br>http://windows.microsoft.com/en-us/windows/using-defender
    *Spybot Search & Destroy:<br>http://www.safer-networking.org/en/index.html
    *Kasperky Free Security Scan:<br>http://www.kaspersky.com/security-scan
    You can also do a check for a rootkit infection with TDSSKiller.
    *Anti-rootkit utility TDSSKiller:<br>http://support.kaspersky.com/5350?el=88446
    See also:
    *"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked
    *https://support.mozilla.org/kb/troubleshoot-firefox-issues-caused-malware

  • I cannot use face time on 3G my provider is BT is this the problem  wire less is working fine for face time

    I cannot use face time on 3G my provider is BT is this the problem on wireless it works fine
    Regards Malcolm

    Your carrier must support using FaceTime when connected to their cellular network.

Maybe you are looking for

  • How do I move itunes to an external drive and use from there

    Mid July 2010 Mini running 10.9.4, 320 gig HD, about 95 gigs left on drive and I need to add bootcamp/windows7 which will need about 90 gigs, maybe a little less for what I need to do with win7. Next problem will be figuring out how to make bootcamp

  • CP-8831-K9= not available in CCW

    Since last week CP-8831-K9= is not available in the Cisco Commerce Workspace (I'm in EMEA). I can add it but no pricing is shown for it. Does anyone know why this is?

  • Doubts in validating message using BPM

    1)Have to check the response message has not been sent twice for the same id, if wrong stop processing the message further. 2)Have to check the values coming in message is valid or not by comparing the values with R/3 table. 3) When sending Email ale

  • Not enough memory to save this file

    hi , im doing a artwork with a size of 210" x 72" and 4 layers in total ( the size is actually half of the actual print size which is 420" by 144" ). But whenever i want to export the ai file to psd , the error prompting ' Not enough memory to save t

  • How can I troubleshoot an SSIS package with errors ?

    I am testing a package which is a straightforward move from Oracle table-A  to Oracle table-B  I have the header and table tables working fine, but the detail table is getting an error, with the errors not being helpful at all. The detail data flow h