Nano recognized in iTunes

Down to the details
Nano not recognized in iTunes or updater, BUT is in Windows.
I've done everything the self help says TWICE.
It works fine on my at work computer.
2nd ipod nano does same thing on my computer.
2nd ipod works fine on work computer.
So I am certain its the computer setup.
My main drive is listed as "F:\" not "C:\" is this a possible problem?
Ever since setting up a raid 0 this has been the case. Everything else works fine.
I see not much gets answered around here? LOADS of questions....
Any ideas???
Scott

Well its working again. I did the format of ipod in fat32, but it still did not work... then I chgd my c: designation on the ipod to e: and it worked. (my boot volume is designated as F: apparently ??? because of the RAID 0 setup ) who knows.
Scott

Similar Messages

  • Nano recognized in iTunes only when in disk mode...

    I went through all of the 'r' process to restore the iPod Nano and reinstall , etc... but still iTunes recognizes the Nano only when I put it in Disk mode ! I can see it in windows but not in iTunes if it's in normal mode. Diagnostic tool says that everything is fine ...
    Can someone help !
    Thanks

    Hey laudany!
    Have you tried assigning your iPod a different drive letter? Follow these steps below:
    Log off of any other users on your computer.
    1 - Don't plug in your iPod yet.
    2 - Go to "START -> Control Panel -> Admin Tools (if you don't see this, click on "classic view" button on the left panel) -> Computer Management."
    3 - Click on the "Disk Management" button in the left panel area.
    4 - Now, with "Computer Management" and Control Panel windows opened, reset your iPod, and connect it.
    5 - Right-click on your iPod's listing there (after a few moments when it gets recognized in this drive window), and click on "Change Drive letter and Paths". Then the "Change..." button.
    Here's what it should look like:
    Assign your iPod the letter "M" "N", "O" or the like (further along in the alphabet).
    For more details, see this article:
    Windows confuses iPod drive letter / Changing drive letter
    I hope that helps you.
    -Kylene
    If any post helps or solves your problem, please click the "Solved" or "Helpful" buttons on top of that post. Thank you for helping the boards!

  • Nano recognized by iTunes but battery won't recharge

    It gives me the black and white Do Not Disconnect sign, but it's also not recharging the battery. What's wrong with it? Thanks.

    Remove and reinstall iTunes by:
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    Next, try
    Try DFU mode and then restore to factory settings/new iPod via iTunes                   
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    Try on another computer as a test to help determine if you have an iPod or computer problem. You will have to restore the iPod on this computer.
    - Last, make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar

  • TS1363 My ipod nano 5th generation is no longer recognized by itunes, and won't play any of it's music.  It still shows it all listed, but freezes up if you select a song to play.  Is there a way to restore it?

    My ipod nano 5th generation will no longer play any of it's loaded songs.  It still plays the video that is on it, and the radio works.  It is not recognized by itunes and I have gone through all their help steps.  Is there some other way to restore it?

    If the iPod is defective and not abused Apple will exchange it at no cost under your warranty.
    Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar

  • My ipod nano is no longer recognized by itunes after I installed windows 8.1.  The ipod nano still is recognized and works with a Windows 7 computer

    My ipod nano is no longer recognized by itunes after I installed windows 8.1.  The ipod nano still is recognized and works with a Windows 7 computer

    Hello, Pete. 
    Here is an article I would recommend going through when an iPod is not recognized by iTunes or the computer.
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    Usually the resolution is updating the Apple Mobile Device Driver.  See the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Cheers,
    Jason H. 

  • TS3716 ipod nano is not being recognized by iTunes.

    My ipod nano 2nd generation (and working perfectly) is not being recognized by iTunes.
    Any suggestions?

    Does the iPod work OK?
    Have you tied resetting the iPod? Nothing will be lost
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    Next would be to place the iPod in recovery mode and then restore via iTunes.  If iTunes does not see the iPod then the iPod is not usable. For recovery mode:
    iPhone and iPod touch: Unable to update or restore

  • HT1386 I just reinstalled my windows operating system and decided to put on windows 8.  After loading all of my music back into a freshly installed itunes, my 4th gen ipod is not recognized by itunes.  My 1st gen ipod nano works with no problem.  Help!

    reinstalled my windows operating system and decided to put on windows 8.  After loading all of my music back into a freshly installed itunes, my 4th gen ipod is not recognized by itunes.  My 1st gen ipod nano works with no problem.  I can eliminate any problems with the cable and connection.
    I've stopped and started the service, and also have performed cold reboots.
    Nothing seems to have helped the situation.
    Help!

    See:
    iOS: Device not recognized in iTunes for Windows
    I would start with
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    iTunes for Windows: Device Sync Tests
    Have you tried on another computer to help determine if you have a computer or iPod problem?
    The iPod Classic uses different drivers than the Nano

  • HT204302 My ipod nano is not recognized in itunes on my computer, when it has in the past. How do I fix this?

    My ipod nano is not recognized in itunes on my computer, when it has in the past. How do I fix this problem?

    I would think, Twins1995, that if we are having the problem, others are as well. Hopefully, Apple will shortly issue a follow-up software release to fix the problem. Or is that just wishful thinking on my part.
    It would be helpful, if there were some kind of work-around in the interim, so we can use our devices. Pretty frustrating when you consider that all of the hardware and software is produced by Apple.

  • I recently upgraded to iTunes 11.1.5 and now my iPod Nano is not recognized in iTunes. I also upgraded my iPhone 5s to iOS 7.1. i Tunes on my computer does recognize my iPhone. What is the problem with my iPod Nano not being recognized?

    I recently upgraded to iTunes 11.1.5 and now my iPod Nano is not recognized in iTunes. I also upgraded my iPhone 5s to iOS 7.1. i Tunes on my computer does recognize my iPhone. What is the problem with my iPod Nano not being recognized?

    I would think, Twins1995, that if we are having the problem, others are as well. Hopefully, Apple will shortly issue a follow-up software release to fix the problem. Or is that just wishful thinking on my part.
    It would be helpful, if there were some kind of work-around in the interim, so we can use our devices. Pretty frustrating when you consider that all of the hardware and software is produced by Apple.

  • 6th gen ipod nano not recognized by itunes on my PC (Windows 7). tried everything to fix, but still not working... please help

    I have a 6th gen ipod nano that is not recognized by itunes on my PC (Windows 7). I get an error that it 'could not be identified properly'. I have tried all tips on the apple site to correct the problem, including unistalling and reinstalling itunes twice. Nothing works. Has anyone tried something that worked that is not part of the Apple support page (http://support.apple.com/kb/TS3218)? Thank you in advance for any help!

     
    gltg wrote:
    Running Windows XP professional SP3 and itunes 10.2.
    I have followed every troubleshooting page on the apple support site yet my ipod nano 6th gen is not recognized by itunes
    I have spent 3 days messing with my pc and have made no real progress.
    Then it's time to call Apple tech support while you are still under warranty.  Every iPod comes with complimentary, single-incident telephone technical support within 90 days of your iPod purchase.   If you also purchased AppleCare, then your warranty is extended for technical support and hardware coverage for two years from the original purchase date of your iPod.
    U.S. iPod and Mac technical support: 1-800-APL-CARE (1-800-275-2273)

  • Ipod nano 4 not recognized by itunes 12.1

    ipod nano 4 no longer recognized by itunes (just installed 12.1).  used to work ok.  have second ipod nano 4.  I can update it, but itunes freezes after sync

    http://technicallyeasy.net/2009/03/restoring-a-previous-version-of-your-itunes-l ibrary/ Try this as my situation was different...I deleted my library in  Itunes11.1.1.5 before deleting it..I created a new library in 10.3.1 as  my library was saved on disc from last having 10.3.1.

  • Ipod nano 1st gen is not recognized in itunes 10

    I updated my computer system to leopard 10.5.8 as well as the latest itunes 10. I bought a new ipod nano 6th gen, and it syncs and works fine. The problem I have is my old Ipod. It is detected by my power mac on the desktop only the icon it has is a folder, and when I open it is in blank. I open Itunes 10 and it doesn't appear. And I tried to follow the instructions on apple support, tried all ports, tried reseting the ipod, and it is still not showing up on itunes. Can someone help me with this please?
    Also, a white line showed up on the screen, does that mean the screen is broken? I can still see everything going on normally on the ipod but not where the line comes up (middle of the screen).

     
    gltg wrote:
    Running Windows XP professional SP3 and itunes 10.2.
    I have followed every troubleshooting page on the apple support site yet my ipod nano 6th gen is not recognized by itunes
    I have spent 3 days messing with my pc and have made no real progress.
    Then it's time to call Apple tech support while you are still under warranty.  Every iPod comes with complimentary, single-incident telephone technical support within 90 days of your iPod purchase.   If you also purchased AppleCare, then your warranty is extended for technical support and hardware coverage for two years from the original purchase date of your iPod.
    U.S. iPod and Mac technical support: 1-800-APL-CARE (1-800-275-2273)

  • Ipod nano 4th not recognized by itunes or windows

    Okay so I have had my iPod Nano 4th generation since it like came out. Recently it has been odd turning off on its own and this morning i turned it on and then put it to sleep. It kept flashing in between asleep and awake. Then I bought new music on iTunes so I wanted to sync it. I connected it to iTunes and it wasn't recognized by iTunes or by my computer (lenovo g500 windows 8) so I uninstalled iTunes updated my computer turned on and off the apple and ipod services and then restarted and tryed reconnecting. after that i deleted the temp file. Ugh I have done every **** thing on the apple support thing and nothing has worked. Please help me.

    Hey theartistssh,
    Thanks for the question. I understand you are experiencing issues with your iPod nano. The following resource may provide a solution:
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/TS1369
    Thanks,
    Matt M.

  • My iPod nano 5th generation is not recognized by iTunes. I did update, but still, it won't work. I don't want to uninstall the iTunes cos  I don't want to lose my music and audio books. What to do? It started after I updated iTunes.

    my iPod nano 5th generation is not recognized by iTunes. I did update, but still, it won't work. I don't want to uninstall the iTunes cos  I don't want to lose my music and audio books. What to do? It started after I updated iTunes.

    iPod appears in Windows but not in iTunes

  • Ipod nano 6th gen is not recognized by itunes on a PC running Windows XP professional SP3, itunes 10.2

    Running Windows XP professional SP3 and itunes 10.2.
    I have followed every troubleshooting page on the apple support site yet my ipod nano 6th gen is not recognized by itunes (but it shows on my pc as a hard disk) weirder still, my ipod nano 3rd gen works just fine on this computer.
    Whats wrong? HELP!!!
    I have spent 3 days messing with my pc and have made no real progress.

     
    gltg wrote:
    Running Windows XP professional SP3 and itunes 10.2.
    I have followed every troubleshooting page on the apple support site yet my ipod nano 6th gen is not recognized by itunes
    I have spent 3 days messing with my pc and have made no real progress.
    Then it's time to call Apple tech support while you are still under warranty.  Every iPod comes with complimentary, single-incident telephone technical support within 90 days of your iPod purchase.   If you also purchased AppleCare, then your warranty is extended for technical support and hardware coverage for two years from the original purchase date of your iPod.
    U.S. iPod and Mac technical support: 1-800-APL-CARE (1-800-275-2273)

Maybe you are looking for

  • Airport Express not recognized by Utility after changing security setting.

    We use an Extreme with an Express to extend the network and run speakers. While trying to eradicate Airtunes dropouts I changed the security setting on the Express using the Airport Utility. After the update, the Express is no longer being recognized

  • Flex Plugin that calls Webservice works in Internet Explorer but not firefox

    I created a simple flex plugin that consumed a web service i built and was working with it locally. I uploaded the files to the server, and when i test the file out in internet explorer, the plugin loads great. However when firefox or any other brows

  • Defective Apple TV 2?

    So I finally upgraded to Apple TV 2, because I wanted my mlb.com on my apple tv (still don't undertand why this couldn't be on the apple tv 1 .. sigh). So I get it home and I plug it into the same hdmi cable that my apple tv 1 was using. The problem

  • ABAP/4 processor: POSTING_ILLEGAL_STATEMENT in WSM3

    hi all, i am getting dump while doing listing in WSM3 stating 'Update was terminated '. the detailed message is as follows: Transaction..   WSM3 Update key...   4BCEF56BE790016000000000C0A80054 Generated....   22.04.2010, 08:12:55 Completed....   22.

  • Tween Class - calling Function

    What am I doing wrong?  I have been using the Tween Class in AS2 for years.  This is how I have been using it. //Beginning of my Flash file import mx.transitions.Tween; import mx.transitions.easing.*; function fadeon(mcname:String) {     new Tween(mc