Nano repeating the apple logo, like its frozen, help!!
So i bought a nano yesterday, came home, d/l the iTunes n junk, then tried to plug the iPod in. The apple logo came up, then it went to a screen that asked wut language I wanted. I didnt have a chance to respond, the screen turned black, then it srarted all over again with the apple screen, then the menu, then would go black again. Now it has stopped bringing up the menu screen, but the screen keeps going from black and fading in the apple logo. I've tried resetting it and turning it on or off, but the nano isn't responding. The computer isnt recognizing it either. What should I do???
Windows XP Toshiba laptop
Welcome to Apple Discussions!
Try these...
iPod Only Shows An Apple Logo and Will Not Start Up
iPod Only Shows An Apple Logo
btabz
Similar Messages
-
My I Pad 4 has a white line across the screen with the apple logo and its frozen.
I pad 4 has a white line across the screen with the apple logo on top of it and its frozen... HELP
Try a reset:
1. Hold the Sleep and Home button down (together)
2. For about 10 seconds
3. Until you see the Apple logo (very important) -
Why does this happen?
Before my phone diedthe screen and everything worked except the phone said Searching... and wouldnt get signal.
i was talking on it just 10 minutes before.
now thisHi Jayroh,
Welcome to the Support Communities!
The following article will provide some troubleshooting steps for this issue:
iPhone, iPad or iPod touch: Not responding or does not turn on
http://support.apple.com/kb/TS3281?viewlocale=en_US
Cheers,
- Judy -
I have updated it to 4.3.3 abt 2 weeks ago. I have also tried rebooting it a few time but to no avail. You can email me at [email protected]
Thanks!!!!Hi, did you ever solve this problem?
My 1 year old -- ha! one month out of warranty -- iPhone 4 has been having a nearly identical problem over the past few days.
It started by dying completely so I had the battery replaced, thinking it was simply battery issue.
It then worked again for a moment but started doing exactly what you describe, going through a reset cycle (longer than 30 seconds but who's counting). And it felt quite warm.
Did hard reset, plugged into wall charger and MBP USB but the new battery wouldn't even get a full charge (a whopping 92% after nearly two days). It would even lose battery when plugged in if I opened an app. And all the while plugged in, if I left the phone on, it would cycle through these resets. So I turned it off to try to charge it.
Now suddenly, it's dead again. Totally black, and hard reset does nothing. Up until two days ago there was nothing wrong whatsoever with this phone! And I hadn't even installed a new app that could be the root of the issue. No idea whatsoever what caused this.
Any help would be much appreciated!! -
My i phone 3gs was hang with the apple logo and its not booting
my i phone 3gs was hang with the apple logo and its not booting can any one say me how to fix this .
my phone is blinking with the apple logo and will not start
-
My nano blinks the apple logo when plugged into a charger and will not respond to any reset commands, anyone have experiance with this problem?
By a reset, I assume you meaning pressing and holding both the Select (Center) and Menu buttons (or Volume Down and Sleep/Wake buttons on the 6G Nano) long enough for the Apple logo to appear?
What happens if you try to manually place the iPod into Disk Mode? If you can do that, I would recommend connecting the iPod to iTunes and restoring it.
Putting iPod into Disk Mode
B-rock -
My little brother stole my iPod touch and when I got it back I tried to turn it on and it goes to the apple logo, which its usual, then it gets stuck on a Playboy bunny logo and won't go away.
connect it in recovery mode, then restore from your backup.
-
The Apple logo just flashes on and off and that keeps on repeating what do I do?
Plug it into a computer running iTunes and restore it.
-
I reset my old iphone 3 to give to my gtrandson but all I get now is the Apple logo but nothing else. Can anyone help !!
Hi campbellfrompyrford,
Thanks for visiting Apple Support Communities.
I recommend the troubleshooting steps in this article if your iPhone does not start up past the Apple logo:
iOS: Unable to update or restore
http://support.apple.com/kb/ht1808
All the best,
Jeremy -
tried everything used itunes but it doesnt appear in the device list so i cannot do much what else can i try?
just relax and try this http://support.apple.com/kb/HT1808
-
My iPod has a white screen. After holding down the middle and menu button, the screen goes black then back to white and beeps twice. I have returned to original settings and resorted content to no avail. I still have a white screen. I have plugged it up and tried resetting again and again, still a white screen with two beeps - help.
I have the same exact issue. Fifth generation iPod Nano, blank screen, Restore had no effect. I'm running Windows 7 Home, with all software up-to-date. I suspect hardware damage. Any clarification would be appreciated. Thank you in advance.
-
My iPad hang/freeze with the apple logo. Hard to restore.
Hi all...
How to solve a frozen/crash iPad or restore it?
Seems like my iPad cant login into home screen (now only appears the apple logo).
When i press home+power, i connect into iTunes and detect the iPad for restore.
(in the iPad screen appears apple logo & usb cable)
And while iTunes download the firmware, disconnected while there is 55 min left.
After that, I can't connect my iPad to iTunes.... (now only appears the apple logo).
Thanks for helping.
Awi-Jakarta-IndonesiaAwi ~ This Apple doc may help:
_iPad: Unable to update or restore_
...You can find such support docs by searching here:
http://support.apple.com/kb/index?page=search -
I have an ipad and the only thing it does when you plug it in to the wall is flash the start up apple logo. It will not reboot because itunes can not reconginze it. I have tried holding the home and power button's together but it doesn't help.
I'm sorry, you are correct I am trying to restore my ipad because it stopped working. We thought the battery was dead so we plugged it into the wall charger. All it does when plugged in is flash the apple logo like it is going to start up and then shut off. It repeats this every few seconds while it is plugged into the wall. I let it charge overnight and still nothing.
When I hold the power button and the home button down together while the ipad is plugged into the wall, it does flash then after I release the power button the connect to itunes screen comes on. But when I connect it to my computer it goes blank. itunes does not recongnize my ipad when I plug it into the computer. I have used the same cord to plug in my other devices and itunes recongnizes them so it isn't the usb cord.
It seems as if my system has crashed and I think this may just be an apple service trip for me. But thanks so much for the advice. =D -
Stop showing me the apple logo screen!
I like the iPhone 2.o software. I really do. Omnifocus is great. MySpace Mobile isn't trash anymore. It has some awesome improvements.
It's also incredibly buggy. I only have one issue, but it is an extremely major one.
I've seen this same problem posted recently, but I think it deserves its own new thread.
A few times today, the screen has went black and it displayed the apple logo, like it was resetting. It stays like this until:
1) I actually reset it (doesn't always work), OR
2) I sync it.
Apple, where's the fixes? MobileMe has some big issues as well. I'm not even going to bring up the transition yesterday.
Has anybody found a way to fix this? I'd rather not do a system restore, especially if it doesn't even solve the problem.
Thanks.Make sure you are running the iPhone 2.0 5A347 version and not the 5A345. There have been reports of the 45 version being less stable. If you are running the "old" 2.0 version, just choose "Restore" from iTunes ("Update" will not work) to download the "new" version.
-
Last night while I was trying to delete an app, my iPod crashed. Usually it will restart just fine but it has not sucessfully turned off or restarted as far as I can tell. It stays on the black screen with the scrolling white wheel in the center and about every twenty minutes or so the screen will suddenly go white and then switch to the Apple logo like it's going to turn back on, but it just starts scrolling again. I have tried holding the lock button to try to get it to turn off and that hasn't worked and neither has going through the steps to reset (holding lock and home simultaneously until the apple logo appears). Any other suggestions or is it just toast?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Maybe you are looking for
-
JMS sender adapter conversion prblem
Hi All, I am sending this query again as I think there is some confusion in understanding my problem Hi, I am using JMS adapter to read data from MQ. The length of each segment is fixed. The problem is there is <b>no new line</b> character at the end
-
Hi... Our server is Windows server 2003 64 bit on which SAP IDES 6.0 is there. its working fine. then we have remove Domin through RUN>DCPROMO command so all my user has been removed so i have again created windows users. after that all my service wo
-
We received several Adobe XI Upgrade licenses and would like to install directly over existing Adobe 9 installs. When installing Adobe XI over top of an existing Adobe 9, the install will not work. It is saying to uninstall Adobe 9 first before you
-
Dear Team, I have an internal Windows and Antivirus server. I want to do posture validation and want to make sure that end points checks the updated from the external server. Could you please let me know where do we define information about the in
-
Randomly sorting dimension values in 11g
Hi, I know how (for a text dimension) to easily allow users to sort in ascending or descending order. I also know how to enforce a "default" sort order in the logical layer using a numerical column, etc. But I have Brio users that are used to picking