NANO says its full and its not!

When I open up Itunes and select my nano it shows that my nano is full even though it is not. The most I can load is about 220MB, wheres the rest? I have deleted everything on my nano that I can see and when I do the music is goone but it tells that I am still using 600MB of space. My nano is blank and there is no music on it at all, I have tried the reset,reinstall thing that is in the help menu and I am out of ideas? Can anyone help?

have you tried Restoring your iPod to factory Settings?

Similar Messages

  • HT201250 so what to do when its full and doesn't delete old backups? How can I manually get rid of 2010 backups?

    My time machine is full and its SO VERY VERY VERY SLOW SLOW to do anything on it. I want to completelly kill backups from 2010 and 2011. How can I do this? I'd be ok killing all my backups and doing a fresh start.

    Another thought: if you are prepared to delete all your backups (as you say), you could experiment by deleting a few early backups, then testing that Time Machine continues to allow restorations of some test file, and will continue to do automatic backups as usual. If so, delete as many old backups as you want. If TM does not continue to behave after the old backups have been deleted, erase the TM disc and start again.

  • HT1923 im trying to unistall itunes and its components and is not letting me/

    im trying to unistall itunes and its components and is not letting me?

    Do you get error messages when doing the uninstalls? If so, what do they say? (Precise text, please.)

  • HT5622 my ipod is 4th generation and i want to update it to ios7 but it says its updated and its only on ios6. what am i supposed to do to update it?

    my ipod is 4th generation and i want to update it ios7 but it says its updated and its only on ios6. What do i do to update it?

    well the ipod 4th gen sadly cannot be updated  to the ios7 because the software couldnt or wouldnt connect yhe only ipod that can get the ios 7 is ipod 5 sorry

  • Ever since i plugged my iphone into the computer, all of my music has been messed up. The songs don't have the right album cover i guess they all just got mixed up somehow. i dont know but its annoying and im not sure how to fix it.

    Ever since i plugged my iphone into the computer, all of my music has been messed up. The songs don't have the right album cover i guess they all just got mixed up somehow. i dont know but its annoying and im not sure how to fix it.

    If not this:
    iOS: Wi-Fi or Bluetooth settings grayed out or dim
    If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
    Apple Retail Store - Genius Bar
    Then
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          

  • I buy a new compaq presario cq57 408tu but its bluetooth and wifi not working even installing driver

    i buy a new compaq presario cq57 408tu laptop , but its bluetooth and wifi not working even installing all driver

    Hey there. You didnt state what operating system you are using but I was able to find two articles that should help resolve your issue. 
    Troubleshooting Your Wireless Network and Internet Connection (Windows 7)
    Fixing Bluetooth Issues
    These articles will go through all the basic troubleshooting steps. Let me know if this helps resolve the issue at all.
    Thanks!
    Sean
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • HT201441 what if the previous owner doesn't know the email and password for its account and is not present, i bought this ipod from gamestop but it shows this screen, can i dlete this account to use my ipod ?

    help
    what if the previous owner doesn't know the email and password for its account and is not present, i bought this ipod from gamestop but it shows this screen, can i dlete this account to use my ipod ?

    The device is useless. Send it back and have them return your money.

  • My ipod states its disabled and will not function now ...  please help

    ipod states its disabled and will not work or allow me to reset from itunes?  any suggesstions? 

    You are going to have to restore it. Scince itunes does not connect to ur ipod because its disabled you are gonna have to put your ipod in DFU mode. Basicaly u have to hold the power and home button atthe same time for 10 second then release power button and keep holding home button for about 15 seconds ( all this you do it while ipod is connected to the computer) if it works, itunes will detect ur ipod in recovery mode and will give you the option to restore it.

  • My iPod nano screen is frozen and will not respond. It shows the song which was playing is paused, but will not resume playing. I have held down all controls, and changed the slide switch, but nothing happens

    my iPod nano screen is frozen and will not respond. It shows the song which was playing is paused, but will not resume playing. I have held down all controls, and changed the slide switch, but nothing happens

    Hi Goofy Goat,
    Welcome to the Apple Support Communities!
    It sounds like you have done some great troubleshooting for your iPod nano that is not responding. In this situation, if resetting it did not resolve, I would suggest restoring the iPod back to its factory settings and then sync your content back onto it from iTunes. Please use the following article as a resource for restoring.
    Restoring iPod to factory settings
    http://support.apple.com/kb/HT1339
    Have a great day,
    Joe

  • TS3992 i got problem updating my iphone 3g. my phone doesn't work now. it says no service and can not be activated.beside that it says insert sim even it has sim. please help me.

    i got problem updating my iphone 3g. my phone doesn't work now. it says no service and can not be activated.beside that it says insert sim even it has sim. please help me.

    I have just created this account to tell you that nothing would change if you restored your phone.
    The first NO SIM nuisance happened just a week ago. Nothing had been done to the phone before that. I pressed HOME + POWER buttons to restart the phone and SIM card was successfully recognized as if nothing had happened. Then I had a lucky week, not reminded of this issue at all.
    Today, however, the same problem keeps annoying me. I've used the same method to heal the phone but all I have done seems more like a placebo. So I tried the ultimate solution, restroing it in iTunes.
    Ridicuously, the moment I finished basic setup on the newly restored phone, the same NO SIM CARD INSTALLED message poped up.
    So IMO, it's not what you should do to erase and restore your phone.
    Plus, I called my native carrier and they said no such problems have been submitted. And since my nano SIM card is quite new (three months old), I'm not going to replace it.
    I googled this problem and found something on a Hong Kong webpage. The author of that thread points out that there is a flaw in the SIM card tray that prevents the phone from successfully recognizing SIM cards.
    And I really hope Apple could probe into this issue and give official solutions other than restarting / restoring the phone like an idiot.

  • My ipod nano 7g went off and will not start, this happened after I connect to my computer, my ipod will restart and I no longer turn on. I do?

    please help me my ipod nano 7g went off and will not start, this happened after I connect to my computer, my ipod will restart and I no longer turn on. what I do?

    Hey saintbless,
    Thanks for the question. The following article outlines troubleshooting information for iPod nano. While it mostly refers to the 6th generation, most steps apply for your model as well:
    iPod nano (6th generation): Hardware troubleshooting
    http://support.apple.com/kb/TS3474
    Will not turn on or screen remains dark
    - Connect iPod to power for at least ten minutes to ensure that the battery has enough charge to allow iPod to turn on.
    - If iPod does not turn on after ten minutes, try resetting the device while it is still connected to power. Reset the iPod by holding down the Sleep/Wake button and the Volume Down button for at least eight seconds or until you see the Apple logo appear.
    - If the Apple logo appears on the display, connect iPod to a computer and verify that it appears in iTunes and can play music. If iPod appears in iTunes and can play music, no further troubleshooting is needed.
    - If the screen remains dark and will not turn on, then your iPod may need service.
    Thanks,
    Matt M.

  • I have a 27" iMac with 16GB of factory installed SDRAM and 1T harddrive.  It is telling me the harddrive is full and is not functioning correctly.  How can I adjust so that all files are managed on the harddrive rather than the SDRAM.  (BTW - design flaw)

    Processor 3.4 GHz Intel Core i7
    Memory  16 GB 1333 MHz DDR3
    I have a 27" iMac with 16GB of factory installed SDRAM and 1T harddrive.  It is telling me the harddrive is full and is not functioning correctly.  How can I adjust so that all files are managed on the harddrive rather than the SDRAM.  (BTW - design flaw here.)
    Older Macs with a single Harddrive would simply expand OS management on the drive, and I think I understand the new Fusion Drive to do just that, but how do I get this product that I spent a great deal of money on to be more than a pretty screen?

    I was confused by this statement
    It is telling me the harddrive is full and is not functioning correctly.
    OS X manages ram and when you run out, it create swapfiles to extend your ram on the HDD (Hard Disk Drive). The OS itself, takes about 16 gig of space and that too resides on the HDD.  Your 16 gig of RAM is really a temporary space that holds things from the HDD so the processor can work on them.  There is no design flaw between your ram and HDD.  Something else is going on and there are a lot of smart people here to help you figure out what that "something else" is.
    I would do three things.  First I would create a backup, backups are important.  Second, I would reboot into recovery and repair my HDD.  Lastly while still booted in recovery I would repair permissions.
    Can you capture a screen shot of the exact error you are getting?

  • Laser Jet 1536dnf MFP says memory low and will not print

    Laser Jet 1536dnf MFP says memory low and will not print. Have tried hard disconnect and restart. Error persists.

    Hey ,  Welcome to the HP Support Forum.  I hope you enjoy your experience here. I see that you're encountering the memory is low error status on your LaserJet Pro 1536dnf MFP. I would like to help.  For this particular error, I have found the NVRAM Initialization type of reset to be beneficial in restoring functionality.  Note that completing this step will reset your printer's wireless configuration, ePrint address, and other customized printer settings. If you have created a custom @hpeprint.com address it will be permanently erased. For more information on custom ePrint addresses, click here.   As HP does not typically make the steps for this type of reset available publicly, I will private message you the instructions you need.  Please let me know the result of your troubleshooting by responding to this post.  If I have helped you resolve the issue, feel free to give me a virtual high-five by clicking the 'Thumbs Up' icon below and clicking to accept this solution. Thank you for posting in the HP Support Forum.  Have a great day! 

  • TS1702 I have Foxtel sports pack for London 2012 App so I can watch on iPad overseas in Netherlands. But my wifes iPad in NL says "unauthorised region" and will not show Videos on Foxtel London Olympics App.? I have changed region and reinstalled App?

    I have Foxtel sports pack for London 2012 App so I can watch on iPad overseas in Netherlands. But my wifes iPad in NL says "unauthorised region" and will not show Videos on Foxtel London Olympics App.? I have changed region and reinstalled App?
    I am in The Netherlands on holiday visiting my family who are here. Can someone help? I only got the sports package before I left Australia so I could keep track of Olympics while in NL. My wife who is in NL bought the origional iPad before I got here.

    adetoye50 wrote:
    Dear Contacts Journal Support Team,
    FYI, this is a user to user support forum.  You are NOT addressing Apple here.
    Honestly, I doubt anyone is really going to take the time to read the novel you have written.

  • All music in itunes ipod says no content and will not sync music

    all music in itunes ipod says no content and will not sync music

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync all music and resync
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.

Maybe you are looking for

  • "print quality diagnostic report"

    I have a HP Deskjet 3520 All-in-one printer and I just went to the "HP Deskjet 3520 series toolbox". Under the first tab (Device Services) is the button "Print Quality Diagnostics Page". I then clicked on that button and got the "Print Quality Diagno

  • Problem in delta for material master

    Hi all, We are using "0material_attr" as data source.Till now we were loading data for material using full update mode. Now we want to change the update mode from delta update mode. So we initialized update for material in BW using " initialize witho

  • Pdf files unable to be downloaded from internet explorer

    I have just purchased my first ipod nano, 4th generation. Since I have downloaded itunes to my computer I cannot view pdf files from internet explorer. I then removed itunes from the computer and pdf files could be downloaded from internet explorer.

  • View videos in list, not thumbnail view.

    I just bought the new iPad and so far it is great. I have loaded a bunch of TV shows and movies onto it. The problem is that I can only see the files in thumbnail view which is awkward to say the least. How can I view it in list format or anything ot

  • Quicktime doesn't show last frame of mpeg4 movies

    Why can't I see the last frame of a small mpeg4 videoloop in quicktime (w276 h276 30fr/s 11 frames)? The frame does exist when opening the file in editingsoftware.