Nano shows blinking Apple logo.

I tried to plug in my Nano to charge today, and it started flashing the Apple logo and the no charge icon. It won't manually reset, and the computer won't recognize it to restore. Any suggestions on what to do?

Welcome to Apple Discussions!
Try these...
iPod Only Shows An Apple Logo and Will Not Start Up
iPod Only Shows An Apple Logo
btabz

Similar Messages

  • My Ipad 1 is not working. when i put it for charging it shows blinking apple logo

    I have Ipad-1 with OS 4.2.
    As my i pad sutdown even when it was showing remaining battary as 45%. When I tried to restart it was not getting restrated. I put it on charging and tried to reboot by pressing on-off switch at top and home button. Now I pad is not getting started, it is just showing blinking Apple logo. When I tried to hold home button it was showing to connect to i-tunes.
    Now I connected my ipad with computer and it is not showing blinking apple logo of conection option with i-tune. but when i connect it to power socket it shows same blinking apple logo.
    I went to apple service centre in Navi Mumbai (India) and they suggested me to replace the i pad at a cost of INR 18000 (equal to USD 375).
    Please help if I can restart my Ipad without replacement.

    - See if placing the iPad in recovery mode will allow iTunes to see the iPod so you can restore the iPod via iTunes. For recovery mode see:
    iPad: Unable to update or restore
    - Next, try DFU mode:
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - Last, your iPad needs replacement

  • Ipod nano just shows blinking apple logo

    I accidently disconnected my ipod when it said don't disconnect. Now the screen just blinks the apple logo and won't let me restart or restore or update and my computer doesn't even recognize it anymore. what can i do to fix it?

    A. Try to connect your iPod with another computer with the iPod updater pre-installed.
    B. Still can’t see your iPod, put it in Disk Mode and connect with a computer, instead of doing a Restore on iPod Updater. Go and format the iPod instead.
    For Mac computer
    1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
    2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
    3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
    4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
    5. Eject your iPod and do a Reset
    6. Open the iPod Updater and click “Restore”
    For Window computer
    Go to folder “My Computer”
    Hope you can see your iPod there and right click on the iPod
    Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
    Now select “Format”
    Eject your iPod and do a Reset
    Open the iPod Updater and click “Restore”
    In case you do not manage to do a “Format” on a window computer, try to use some 3rd party disk utility software, e.g.“Partition Magic”.
    C. Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
    Tips
    a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iPod updater.
    b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
    c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
    D. Format your iPod with a start disk
    I have not tried this solution myself, I heard that there were few successful cases that the users managed to get their iPod (you must put your iPod in disk mode before connecting with a computer) mounted by the computer, which was booted by a system startup disk. For Mac, you can use the Disk Utility (on the Tiger OS system disk), for PC user, you can use the window OS system disk. Try to find a way to reformat your iPod, again it does not matter which format (FAT32, NTFS or HFS+) you choose, the key is to erase the corrupted system files on the iPod. Then eject your iPod and do a Reset to switch out from Disk Mode. Reboot your computer at the normal way, connect your iPod back with it, open the iPod updater, and hopefully your iPod will appear there for the Restore.

  • HT4623 What does it mean after you update your phone and then your phone starts to blink on and off showing the apple logo only?

    What does it mean after you update your phone and then your phone starts to blink on and off showing the apple logo only?

    Read http://support.apple.com/kb/ht1808

  • Nano frozen. only shows the apple logo

    my nano seems to be frozen. it only shows the apple logo. ive tried to reset it a couple of times but its still the same. the apple logo still appears and its still frozen. sometimes if i wait a while the screen lights up but its still the apple logo that it displays. the only difference is that the backlight is on. please help me solve this!!!

    Your silver bullet of resolving your iPod issue – is to restore your iPod to factory settings.
    http://docs.info.apple.com/article.html?artnum=60983
    G. Try to put the iPod into Disk Mode if it fails to appear on the desktop
    http://docs.info.apple.com/article.html?artnum=93651

  • HT201210 i updated my iphone 4 to ios 6.. when it finished.. my iphone kept blinking just showing the apple logo.. i connected it to my itunes it didnt read.. help!

    i updated my iphone 4 to ios 6.. when it finished.. my iphone kept blinking just showing the apple logo.. i connected it to my itunes it didnt read.. help!

    Follow the instructions here > http://support.apple.com/kb/HT1808
    Note: You may need to try it several times to get it to work.

  • Nano 4th generation when plugged in shows the apple logo, then says connect to power and restarts

    When I plug my Nano 4th gen in, it shows the apple logo, then immediately says connect to power and restarts the cycle, any ideas?

    Well i guess to the trash it goes

  • My daughter Nano just shows the apple logo and that is it can'y do anything with it.

    My daughters Nano just shows the apple logo and that is it we can not do any thing with it.

    Have you tried a reset ? Press and hold both the sleep and home buttons for 10 to 15 seconds and see if it then reboots - you won't lose any content, it's the equivalent of a computer reboot. If that doesn't work then you might better help in the iPod forum (this is the iPad forum)

  • Nano is showing the apple logo, and then is going straight to exclamation

    When i turn my Nano on, it shows the apple logo, then goes straight to the folder with the exclamation mark...i called apple and they told me t send it in, and i wanted to know if there is any way that i can take it to the store, so they fix it there free of charge? HELPPP!!
    thanks,
    Mike
    Dell Inspiron 8100   Windows XP  

    Have you tried this?
    iPod shows a folder icon with exclamation point when you turn it on
    HP Desktop   Windows XP   iPod nano

  • When i plug my ipod nano into the computer it only shows the apple logo and dosen show up on itune. what do i need to do to fix this?

    when i plug in my ipod to the computer it only shows the apple logo and dosent show up on itunes. What do i do to fix this?

    First, make sure iTunes is correctly installed. You may want to reinstall it.
    http://support.apple.com/kb/ht1925
    If iTunes is installed correctly, hold down the volume down and sleep/wake buttons till you see the apple logo, then try again.
    i

  • HELP! iPhone 4s displays blinking apple logo during boot.

    During reboot, my iPhone 4s just displays the blinking apple logo. I have read several solutions regarding this problem I haven't found any.

    Hi sexy popcorn,
    Welcome to Apple Support Communities.
    It sounds like there is an issue with your iPhone starting up, it only shows the Apple logo. The article linked below provides lot of great troubleshooting suggestions and information about setting up service, if the issue isn't resolve from those 5 troubleshooting suggestions.
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    I hope this helps.
    -Jason

  • Nano repeating the apple logo, like its frozen, help!!

    So i bought a nano yesterday, came home, d/l the iTunes n junk, then tried to plug the iPod in. The apple logo came up, then it went to a screen that asked wut language I wanted. I didnt have a chance to respond, the screen turned black, then it srarted all over again with the apple screen, then the menu, then would go black again. Now it has stopped bringing up the menu screen, but the screen keeps going from black and fading in the apple logo. I've tried resetting it and turning it on or off, but the nano isn't responding. The computer isnt recognizing it either. What should I do???
      Windows XP   Toshiba laptop

    Welcome to Apple Discussions!
    Try these...
    iPod Only Shows An Apple Logo and Will Not Start Up
    iPod Only Shows An Apple Logo
    btabz

  • Apple TV hanged and is now just showing the apple logo

    Guys,
    My aTV2 just hanged.
    I tried a reset but now she is hanged on the boot and is now just showing the Apple Logo.
    I tried another reset by pressing Menu+Down but again now I'm back on the boot and just showing the Apple Logo.
    aTV2 LED is blinking.
    Any idea on how to do this?
    Thanks,

    Have you unplugged from power and restarted?
    If so, get a micro USB cable, hook it up to a computer with that cable alone, fire up iTunes and do a restore of the AppleTV firmware.

  • I can no longer see my iphone on my computer. the ipone is gone blank only showing the apple logo

    my iphone no longer shows up on my computer, the iphone screen has gone blank only showing the Apple logo. I am unable to make and receive calls. Can someone help me with this problem please?

    Your iphone is shown at the top of the page.
    You can also simply click View>Show Sidebar and it will look about the same as it did before.

  • My iPod keeps showing the apple logo + a blank screen and the lock screen keeps freezing when trying to unlock it.

    Last night I turned my iPod touch 4g off randomly and then when I went to turn it back on and went to unlock the screen it froze up right there and will not unlock to the home screen to where all my apps and all that are. Ever since that happened the iPod keeps showing the apple logo repeatedly, as well as a screen being completely blank when still turned on. Also when i plug in the iPod to the computer it recognizes it for a second but the iPod does nothing and shuts off and repeats in showing the apple logo and blank black screen. I can get it to the home screen where the slide to lock button is but every time i even attempt to slide it, it freezes up and doesn't do it.
    I also having been trying to restore it by plugging in the cord and pressing the home button to get the screen with the usb cord to pop up but no matter what i do, it will not let me turn the iPod off period because every time i keep trying to do that it just shows the apple logo and all of what i said up above again. I have also seen it get a white screen to show a few times , which i assume means the white screen of death. I have never seen that screen before this happened.
    I know this is not making any sense whatsoever but this is very hard to put into words in explaining. I have searched the internet but i can't find a single problem that sounds like this one in solving to fix it. The iPod is on right now as i'm typing this. I haven't attemtped to push the buttons down again to fix as i would assume maybe to just leave it alone as i sleep through the night in hopes of it maybe working or even dying. I've only had this iPod for 4 months now and i just don't understand why it won't let me turn it off completely or work properly for me to restore it.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

Maybe you are looking for

  • Why does Onscreen Keyboard Icon not pup up when tapping in a control?

    When using touch screen, tapping in an input field brings up a small keyboard icon nearby (see image). This icon allows to open the on screen keyboard near the input element. This works in many applications (notepad, windows explorer, ...). My questi

  • How to view iWork files in iPhone

    I was revisiting the WWDC from June and Jobs mentioned the ability view iWork files on the iPhone. I have done a lot of searching and have not found any answers. Can someone help, please?

  • Problem while making incoming  payment entries

    I am making check incoming payment entries in SAP-B1. As we receive check payment entries, it is crediting clearing check account & debiting account receivables. Please let us know how do  bank account will be credited & clearing check account will b

  • Adding Text on Pictures

    Hi, is there anyway I can use iPhoto 6 to add text on a picture? I've posted my pictures on my website and I would like to add my name on them to prevent it from being used by somebody else. Thank You in advance.

  • Back to uwl when BSP is finished

    Hello everybody, I configured uwl XML file so that I start a BSP when selecting a task. (This is working fine). My BSP assist the user to take the appropriate decision (Approve / Reject) (This is working fine). The BSP update the WF in the back-end s