Nano shows up in Windows and Updater, but not in iTunes

I have been having trouble for the past month with my ipod nano. What happened was I was installed a program to convert avi files to wmv files and it required me to install another program that put a lower quicktime on my computer, quicktime classic I think it was called. When I opened itunes later it gave me an error saying itunes needed to be reinstalled, so I went to apple and downloaded the newest version of itunes and installed it. Ever since then itunes has not picked up my ipod. It shows up in My Computer and in the updated, and when I plug it in it even launches itunes, but it will not show up in the iTunes source panel on the left.
Here is what I have done so far with no avail:
Also I have these two updaters installed on my computer: 2006-03-23 and 2005-09-23
-Restored my ipod to both updaters
-Used Gailpod’s method of formatting and then restoring. I restored to both Updaters
-Completely removed any instances of Itunes on my computer then reinstalled.
-Uninstalled and reinstalled itunes and ipod
-Did all of the “5rs”
Now I am just going crazy it feels like. It was working just fine until I installed that program. I am not sure what to do. Also my device manager is fine, all the devices are still showing up.

I installed iTunes on a computer that has never had it on it before and it still will not pick up my ipod, yet windows shows it as well as the updater...I have ruled out iTunes and the cord, I believe something is wrong with the iPod itself....any suggestions? I have restored it and formated it, not sure what else I can do

Similar Messages

I had purchased Imovie today I can find the icon movie it click it but it will not open. Its shows up in docs and purchased but not apps? how do i add it to my bar and open it?!

I had purchased Imovie today I can find the icon movie it click it but it will not open. Its shows up in docs and purchased but not apps? how do i add it to my bar and open it?!

Exactly where are you clicking, you need to be specific. For example, are you using the Dock, the Applications folder, Launchpad, etc. to attempt to start teh app? Also IOS 7.1.2 does not run on a Mac, what version of OS X is installed on your computer?

IPOD Nano appears in Windows XP Pro, but not in iTunes even 7.1.1

Dear Experts
I have 1 GB iPOD nano. In my computer it is identifying in My Computer. But, not in iTunes.
But, if I put the iPod in Disk Mode, then it is being identified both in My Computer as well as in iTunes also. Then, If I sinc OR manually drag music from PC to iPod in iTunes, it is happening. But after ejecting the iPod from iTunes. The iPod go on blinking mode only.
(Off and On). How to take it out from Blinking mode to normal I am not able to know.
Then in that stage If I reconnect it to PC, it is appearing in Disk mode in iTunes. Then to get it normal mode I need to restore it in iTunes. Then only it is comming to normal ipod activity after rmoving it from PC. But after restore there is no music na.
Software also updated from 1.1 to 1.3 through iTunes in Disk mode. I have downloaded lates iTunes 7.1.1 also from net.
Please guide me to solve my proble. I found so many people like me who purchased iPod of Apple suffering like this. Why Apple put this much tipical process for their product ?
Thanks in advance.
PS Prasad
P-IV Windows XP Pro 512 MB RAM

I installed iTunes on a computer that has never had it on it before and it still will not pick up my ipod, yet windows shows it as well as the updater...I have ruled out iTunes and the cord, I believe something is wrong with the iPod itself....any suggestions? I have restored it and formated it, not sure what else I can do

My ipad 2 won't update apps. It shows that 2 apps need updating, but not which ones.

My iPad 2 won't update apps. It shows that 2 apps need updating, but doesn't show which 2.

Many people are having this problem for the last couple of days. This is a problem that Apple has to fix. If you look around the forum, you will see many, many discusssions about this and they have been going on for a few days.
According to Fly150 in another discussion, this is a workaround - for the time being.
If you want to update the Apps while waiting for Apple to fix Updates:
1. Go to App Store
2. Select Purchased
3. Select All
4. Scroll down to find the Apps showing update
5. Select update on the Apps
This should update the Apps and get rid of the update count in App Store.

RMI-server works on Windows and Linux but not on Solaris

I wrote an application which uses RMI. The server is successfully tested on Windows and Linux. However it doesn't work on Solaris.
Naming.lookup works, I can find the server. But calling a method on my remote interface causes a ConnectionException:
java.rmi.ConnectException: Connection refused to host: 192.168.1.123; nested exception is:
     java.net.ConnectException: Connection refused: connect
     at sun.rmi.transport.tcp.TCPEndpoint.newSocket(Unknown Source)
     at sun.rmi.transport.tcp.TCPChannel.createConnection(Unknown Source)
     at sun.rmi.transport.tcp.TCPChannel.newConnection(Unknown Source)
     at sun.rmi.server.UnicastRef.newCall(Unknown Source)
     at at.triton.javaengine.server.ServerImpl_Stub.connectToWindow(Unknown Source)
     at at.triton.javaengine.client.JavaEngineClient.connectToWindow(JavaEngineClient.java:288)
     at at.triton.javaengine.client.JavaEngineClient.main(JavaEngineClient.java:787)
Caused by: java.net.ConnectException: Connection refused: connect
     at java.net.PlainSocketImpl.socketConnect(Native Method)
     at java.net.PlainSocketImpl.doConnect(Unknown Source)
     at java.net.PlainSocketImpl.connectToAddress(Unknown Source)
     at java.net.PlainSocketImpl.connect(Unknown Source)
     at java.net.SocksSocketImpl.connect(Unknown Source)
     at java.net.Socket.connect(Unknown Source)
     at java.net.Socket.connect(Unknown Source)
     at java.net.Socket.<init>(Unknown Source)
     at java.net.Socket.<init>(Unknown Source)
     at sun.rmi.transport.proxy.RMIDirectSocketFactory.createSocket(Unknown Source)
     at sun.rmi.transport.proxy.RMIMasterSocketFactory.createSocket(Unknown Source)
     ... 7 moreNote that I have almost no experience with Solaris.
Additional information about the common pitfalls which I have already checked:
* rmiregistry finds the server classes (the exception was different without them)
* the server is in the LAN and the desktop firewall of the client is double-checked to let the required ports through to any destination.

java.rmi.ConnectException: Connection refused tohost: >192.168.1.123; nested exception is:
java.net.ConnectException: Connection refused:
: connect
Clearly indicates what is happening inside there.Clearly indicates that you don't know what you are talking about.
Any applications invoked with a security manager must
be granted explicit permission to access local system
resources apart from read access to the directory and
its subdirectories where the program is invoked.Any application that gets a java.net.ConnectionException: Connection
refused is getting it more or less directly from the TCP/IP stack. If the problem had anything to do with policies and permissions and SecurityManagers, it would have been an AccessControlException .
if your client RMI doesnt include these lines then If your 'client RMI' does include these lines then I would like a definition of what exactly a 'client RMI' really is, because I've been using RMI for ten years and wrote a book about it and I certainly don't know.
1)just include these lines
if (System.getSecurityManager() == null) {
System.setSecurityManager(new
SecurityManager());In other words, if the application doesn't already have a security manager, in which case the contents of the policy file or the 'client RMI', or whatever you want to call it, are completely irrelevant, such that they couldn't possibly be having the problem you desrcribe, add a security manager so that we get into the land where you might possibly know what you're talking about?
e a policy file
grant {
permission java.net.SocketPermission
"192.168.1.123:1099", "accept,connect,resolve";
};And this is completely unnecessary if there isn't a security manager, and completely unrelated to the OP's problem.

IMessage message show up on computer and iPhad but not iPhone

I use iMessage on my MacBook Pro, iPad and iPhone but on occasion the messages are not showing up on my phone and only on the other devices. Any idea what is causing this?
Settings on my phone:
Setting>Messages:
-iMessage: on
-Send read receipts:on
-Send as SMS:on
-Send & Receive: my apple ID
>SMS/MMS:
-MMS Messaging:on
-Group Messages:on
Settings on MBP:
Apple ID (same as on phone)
-enable this account (checked)
Can be reached at:
-Phone number (checked)
-Apple ID (checked)
-Start new conversations from (Phone Numer)
Any ideas?

This happens to me every once and a while, but the messages seem to come in eventually.
There have been *loads* of reported issues with iMessage, along with plenty of different ways of fixing them. I would try signing out of all devices, change your AppleID passwork and try again.

Shared calendars are showing up on iPad and iPhone but not on iCloud or her new MacbookAir, any suggestions?

I just got my wife a Macbook air, and cannot figure out why our shared calendars work with both of our Ipads and Iphones, on my icloud account but not her account or her new air.

Levi G B ... Also found another thread by Davidfromsurfside on 10/14/11 0703A with the same problem. I responded on his thread "I have the same problem. IOS5 on iPad1, iPad2 and iPhone4S all with iCloud on. Lion 10.7.2 installed on my MacBookPro and iCloud set up/on. Any new iCal entry on either iPad or on the iPhone ends up via iCloud on both iPads and iPhone. BUT NOT ON THE MacBookPro. And iCal entry on the MacBookPro does NOT GET SENT to iCloud.com or to either iPad or the iPhone. This is a huge problem for me because I do all my office scheduling on the iPad or iPhone but rely on the MakeBookPro to print out daily client lists. I REALLY need to get this fixed...it is causing major business issues. " No one so far has had a fix.... :(

IPod visable to explorer and updater, but not iTunes

Just like the subject line says, I can see the iPod in explorer. The iPod Updater can also see it. But iTunes is a no go. I can browse the iPod drive and see all of the folders.
It is a 4g 20 gig
When I updated to 6.01, it updated the iPod the 1st time it ran, but that's it. So far, I have tried everything in article # 93716. I restored it with the updater, uninstalled itunes, cleaned up install files, reinstalled iTunes, reinstalles the com interface for the iPod service, emptied temp directory numerous times, check for conflicting startup.
I have always used firewire, so I thought I would try a clean install with usb 2.0 . No help.
I am out of ideas.
I could still listen to all my music untill I restored it using the updater.
Help Me please!
Tripp

hello Mr Bond!
Nice to see you in the other forums more often now.
i'm enjoying the opportunity too. i especially like this particular forum. it's quiet, and fairly calm ...
a side question. is it my imagination, or have we pretty much stopped getting (-36) errors since the 5.0.x launches? i was directing people to the Apple troubleshooting document on the (-36) on a daily basis before those launches ... and now i hardly ever seem to see them.
love, b

I can burn CDs from Windows Media Player, but not from itunes. I always get Error 2131. How do I transfer music files from itunes to Window Media Player Library?...or convince itunes to burn a CD?

Cannot burn CD from itunes.

The thing is, they are in the unprotected format? (
They are protected WMA from when you RIP'd them with WMP. iTunes will not read them.
Go to WMP Tools -> Rip Music.
Under Rip settings, it is set to *Windows Media Audio* and most likely *Copy protect music* is ticked. This is how it is protected.
You will need to reRIP them all from CD.

Podcasts are on iPhone and pc, but not in iTunes

I have a problem with podcasts which I don't think is already being discussed on here.
I have a whole load of podcasts which I have previously downloaded through iTunes. The podcasts are on my iPhone and are stored in my PC in the appropriate folder, but when I look at them in iTunes they all have the icon telling me I can download them but they cannot be played from iTunes. It's as if they want to be downloaded again, but I have spent hours downloading them all the first time and can't afford the time or the money to do so again. Since the files are on my PC and my phone, how can I convince iTunes that I have them?

Thank you for taking the time to reply. I have listened to podcasts from iTunes many times before and there are still a few podcasts in my iTunes and I can play those as I always have. It's just the ones from one particular folder that I can't play in iTunes.
Joanne

TS3572 My new ipod shuffle is showing up on my mac desktop but not in itunes. What should I do?

My new ipod shuffle is shwoing up on my mac desktop (and the charging light is flashing) but is not being recognised by itunes. What should I do?

On your Mac, go to System Preferences>iCloud, sign out, then sign back in with the ID you want to use.
If you're running iOS 7 on your iPod and old ID is your ID, and if your new ID was created by editing the details of this old ID (rather than being an entirely new ID), go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

Table borders show up with Firefox or IE but not Safari (Win or MAC)

This very simple site (http://www.brandondean.net) has two table borders that show up under FF and IE but not Safari (either Win v4.0 or Safari for MAC, same result). I'm not an expert but I did the work using Dreamweaver 2004 MX as XHTML compliant, tested every page at W3C.org to make sure they comply with XHTML, and they do (except for my not putting in "alt" on images). I even downloaded Dreamweaver CS4 to run the "clean up the code" command and nothing is fixing the problem. I'm hoping someone out there has seen this before and can help us out. Thx.

Hi Gary,
It's probably just because the border widths you are specifying are too small (or WebKit is interpreting picas differently to Firefox/IE - I say WebKit as the same problem is visible in Google Chrome and that uses WebKit like Safari as well).
Try setting using this instead:
.borders {
font-family: Verdana;
font-size: 10px;
font-style: normal;
font-weight: normal;
font-variant: normal;
color: #cccccc;
text-decoration: none;
border: 1px solid #888888;
That seems to do the trick for Firefox and Chrome on this Linux machine I'm using at the moment.

My iPod Classic is seen by Windows but not by iTunes. I have reset it, gone to disk mode and it won't show up in iTunes. There appears to be music on it in a file called MUSICSAVE. How can I get this to work with iTunes again?

My iPod Classic is seen by Windows but not by iTunes. I have reset it, gone to disk mode and it won't show up in iTunes. There appears to be music on it in a file called MUSICSAVE. How can I get this to work with iTunes again?

1. Update iTunes to the latest version. Plug in your iPod. If iTunes still can't recognize it, then in iTunes in the top left corner click help> run diagnostics. On the box that comes up, check the last two things. Click next and it should identify your iPod.
2. Click on your windows start menu. Type in "services". Click on it and when it pops up, on the bottom of it click on "standard". Now Scroll down to find "Apple Mobile Device" Right click it when you see it and click on "Start". When it has started, close iTunes and replug in your iPod and it should show up.
3. Check the USB cable
4 Verify that Apple Mobile Device Support is installed
5. Restart the Apple Mobile Device Service and verify that the Apple Mobile Device USB Driver is installed.
6. If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job
7. Check for third-party software conflicts.
<Link Edited By Host>

My iPod nano g7 isn't showing up on iTunes although i plug it in. it shows on the computer but not on iTunes. also it won't sync , accept new songs and doesn't put on podcasts. it is new, i got it for christmas. PLEASE HELP

my iPod nano g7 isn't showing up on iTunes although i plug it in. it shows on the computer but not on iTunes. also it won't sync , accept new songs and doesn't put on podcasts. it is new, i got it for christmas. PLEASE HELP

Hi avmary11,
If your are having issues with your iPod not being recognized by iTunes (but it is being recognized by the computer), you may find the following article helpful:
iPod: Appears in Windows but not in iTunes
http://support.apple.com/kb/ts1363
Regards,
- Brenden

3rd gen iPod Nano will not sync with latest version of iTunes. It passes the connectivity test but not the sync test under diagnostics. Worked fine on old Windows 7 laptop but not new one. From Control Panel it shows up as an Apple iPod USB Device...

3rd gen iPod Nano will not sync with latest version of iTunes on new laptop. It passes the connectivity test but not the sync test under diagnostics. Worked fine on old Windows 7 laptop but not new one. From Control Panel it shows up as an Apple iPod USB Device...

Never mind, I think. I think I figured it out. There was 1 song (out of > 900!) that somehow had been purchased with the other ID - I have no idea how. Once I deleted that song, it stopped asking.
There may be something with the newest iTunes version too. I didn't think in older versions that the "On this iPod" list of songs was greyed out. But at least it syncs ok.

Nano shows up in Windows and Updater, but not in iTunes

Similar Messages

Maybe you are looking for