Nano Software loading in Windows XP Home
When installing the nano software the install fails with error code 0x80040707 and you have to exit!!!! Very annoying and no explanation as to why or any assistance.
Appreciate any help on this matter.
Also you cannot uninstall as you get the same error code!!!!!
Welcome to Apple Discussions.
Check this: http://consumer.installshield.com/kb.asp?id=Q108167
Similar Messages
-
Install software for Deskjet 2540 will not load on Windows XP Home edition SP3 machine
I have successfully connected a new Deskjet 2540 printer to a Windows 7 machine, and IPAD Air, and an XP Pro laptop.
I cannot get the install software to load on and XP Home edition SP3 machine. I have tried all of the HP remedies that I can find, over period of two days, but the installation fails every time with the message "Installation failed. The software required for your printer could not be installed".
What can be done?Hi,
Thanks for your second installment of help suggestions.
I started check disk as you proposed and it ran happily for some hours with evidence of progress. However eventually I found the computer stopped with a number of suggestions for restarting. I tried all of these and some others, but got no further than the first Windows picture. At this point the machine restarts, and goes through the same process.
The printer problem, as you can see has unfortunately become secondary to trying to recover the system.
What I propose is to try to read the disc in question on another computer, and extract the important data files to a safe place. Then to return the disc to its own machine and use the recovery CD, to try to get the machine to recover with the minimum of loss. If this succeeds, I might even find that the printer software then loads without problem. There is a big IF there, and I won't hold my breath.
None of this relates to the printer problem, and fortunately i have three other devices running which are happily connected to the printer.
I just wnted to explain why there will be no further feedback for a while. I will take my time with the recovery process.
Thanks for all of your help. I have just been unlucky.
Regards -
Good Afternoon Everyone,
I am not technologically savvy as a result I'm having trouble understanding previous posts on "The user profile service service failed to logon user profile cannot be loaded." Lingo on domain reset etc, not sure that this pertains to solving my issue
... I cant even get pass the sign in page let alone make changes. I am having this issue with my Dell Studio XPS 1340 with Windows 7 Home Premium. If anyone can provide their two cents I would greatly appreciate.
Very Respectfully,
Jesse"Jesse.soto1" wrote in message news:1e164fdf-7370-45c0-9bc7-3b58278121c3...
Good Afternoon Everyone,
I am not technologically savvy as a result I'm having trouble understanding previous posts on "The user profile service service failed to logon user profile cannot be loaded." Lingo on domain reset etc, not sure that this pertains to solving my issue
... I cant even get pass the sign in page let alone make changes. I am having this issue with my Dell Studio XPS 1340 with Windows 7 Home Premium. If anyone can provide their two cents I would greatly appreciate.
Very Respectfully,
Jesse
Home Premium cannot logon to a Domain, nor can it be set to try it.
when you get the logon window, try hitting the three-finger salute )Ctrl+Alt+Del) twice – it may bring up the old-style login window – enter your credentials there.
Noel Paton | Nil Carborundum Illegitemi |
CrashFixPC | The Three-toed Sloth -
Nokia Software Update and Windows 7 Home Premium 6...
I cannot get this application to run - it goes nowhere on start-up. I have disabled both router firewall and Windows 7 firewall and still no luck. I have also tried instructions for task manager on the FAQS section of the website, and stopped background running.
I have a Nokia 6303i Classic, connected via USB and the latest driver.
I have installed latest version of Ovi Suite 2.2.0.245 and tried updating from there, and this does not work. It does sometimes get to the point of saying that I have Frimware 6.40 on the phone and need to update to firmware 7.10.
I have also tried latest version of PC Suite 7 and this starts Software Updater, which does not work anyway.
I have turned Game Mode on for BitDefender Antivirus 2010, and still no joy!
What is going on??
Solved!
Go to Solution.Go to manage games on BitDefender and add Nokia Ovi Suite. That worked for me. Also, are you in direct connection to the internet or are you accessing it via a server in a LAN network? Ovi Suite does not currently support those kinds of connections and you need to be in direct connection to the internet.
If you find my post helpful please click the green star on the left under the avatar. Thanks. -
Install error #1620 PrPro Windows Vista Home Premium
Install error 1620 when attempting to install CS4 "This installation package could not be opened" (for each component of the software package). Windows Vista Home Premium 32 bit, Intel i7 processor. Unable to install any components of PrPro. This is after a clean install of Vista Home Premium (part number x12-24171-01)with discs provided by microsoft.
I would never install a new OS over the top of what is there... wipe/format the hard drive and install fresh
Also, if you have a 64bit computer with more than 4Gig of ram, think about the 64bit version of Win7
CS4 can't use more than about 3Gig of ram, but if the OS can use more to run better... that is what I would do
Just be aware that you should still run CS4 in WinXP compatibility mode, as I posted before
Also read the article below... I have NOT done this, but it seems to be an easy process
http://windowssecrets.com/newsletter/clean-install-windows-7-from-the-upgrade-disc/ -
I have a Windows XP Home Edition computer. I recently attempted to upgrade iTunes to v10.7. It loaded and installed OK, but now it won't run. When I try to launch it, it gets aborted by the windows Data Execution Prevention software. Any ideas?
Yes, this did solve the problem. But I had some trouble updating QuickTime. It failed, with the installer complaining that it did not have the required permissions to install the files it needed in the program directory. I got it to work by telling it to install the files to another directory. All seems well now - Thanks!
-
Issue loading itunes on windows 7 home premium 64
Hello All ,
Kind of a computer newbie here with issue loading the new iTunes 9.0.3 software onto a new pc.
here is situation
Just got a new gateway dx4831 with windows 7 home premium 64 os preinstalled, down loaded the new software this afternoon. iTunes and QuickTime seemed to load and install correctly. Go to click on iTunes shortcut on desktop and nothing happens. Quick times loads and seems ok. Have tried to uninstall and download a couple of times but same issue.
Please help this computer newbie out
Thanks in advance for the input
JCan never get the time zones clear in my head. This used to cause all manner of issues when I was based in North Carolina, and trying to call home ...
Thursday's tomorrow for you? If so, I'd try (on Thursday) both uninstalling the Norton trial and then running Symantec's Norton Removal Tool. (There's an unpleasant possibility of "undead" Norton componentry surviving the uninstall and continuing to molest your iTunes and/or BonJour.) Here's a link to the Tool:
[Download and run the Norton Removal Tool|http://service1.symantec.com/Support/tsgeninfo.nsf/docid/2005033108162039]
I don't use it myself, but I hear quite good things about Microsoft Security Essentials. It also has the advantage of being free:
http://www.microsoft.com/Security_Essentials/
And the built-in Windows firewall is not to be sneezed at (and also free). That's what I'm currently running on this particular box.
I'm planning to eventually install a Norton of some description on the Lenovo, but that's mostly because it's handy to have hands-on access to a version of the software when helping folks to configure it for their iTunes ... (Yes, I agree that that's a bit of a perverse reason for installing security software.) -
Microsoft Windows Vista Home Premium Edition Service Pack 2 (Build 6002)
Sony Corporation VGN-NS20E_P
iTunes 10.6.1.7
QuickTime 7.7.1
FairPlay 1.14.37
Apple Application Support 2.1.7
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 5.1.1.4
Apple Mobile Device Driver 1.59.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.5.502
Gracenote MusicID 1.9.5.115
Gracenote Submit 1.9.5.143
Gracenote DSP 1.9.5.45
iTunes Serial Number 0012ACE4032C3EC8
Current user is not an administrator.
The current local date and time is 2012-05-26 22:17:26.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
**** External Plug-ins Information ****
No external plug-ins installed.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {78DA402D-66EE-4084-9D5E-8A010E0B8437}
Description: Atheros AR928x Wireless Network Adapter
IP Address: 192.168.2.8
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.2.1
DHCP Enabled: Yes
DHCP Server: 192.168.2.1
Lease Obtained: Sat May 26 19:10:42 2012
Lease Expires: Sat May 26 19:10:41 2012
DNS Servers: 192.168.2.1
Adapter Name: {C1458549-CA0B-4A3B-8F8E-9259653AA0DD}
Description: Marvell Yukon 88E8055 PCI-E Gigabit Ethernet Controller
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Thu Jan 01 00:00:00 1970
Lease Expires: Thu Jan 01 00:00:00 1970
DNS Servers:
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was unsuccessful.
The network connection timed out.
Connection attempt to firmware update server was successful.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2012-05-26 20:57:29.
**** Device Connectivity Tests ****
iPodService 10.6.1.7 is currently running.
iTunesHelper 10.6.1.7 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) ICH9 Family USB Universal Host Controller - 2934. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2935. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2936. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2937. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2938. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2939. Device is working properly.
Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293A. Device is working properly.
Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293C. Device is working properly.
FireWire (IEEE 1394) Host Controllers:
RICOH OHCI Compliant IEEE 1394 Host Controller. Device is working properly.
Connected Device Information:
JULES'S IPO, iPod nano (4th Generation) running firmware version 1.0.4
Serial Number: YM839W553QU
Bus Speed: 61440
Most Recent Devices Not Currently Connected:
iPhone 4S running firmware version 5.0.1
Serial Number: DNWH3R84DTD2
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.Hello, VvioletT.
Thank you for visiting Apple Support Communities.
I see you are experiencing issues syncing your iOS device. Here are a couple articles that I would recommend going through when experiencing this issue.
iOS: Troubleshooting USB-related alerts when syncing
http://support.apple.com/kb/TS5254
Resolve issues between iTunes and security software
http://support.apple.com/kb/ts3125
Cheers,
Jason H. -
I cannot load the latest version of Itunes on my Toshiba PC with Windows 7 Home Premium. Tried to re-install. Dead in the water. Windows error 126. Cant start becasue MSVCR80.dll is missing from my computer
You may have to follow the slightly more detailed steps in whichever of these two applies to you.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
Rebooting into safe mode may be needed to delete any folder the instructions say you should remove. You may also find this Microsoft Fixit helps to remove stubborn components. It has taken some people several attempts to completely clean iTunes and supporting software before they have been able to successfully reinstall it.
tt2
Message was edited by: turingtest2 -
Computer crashed. Had to rebuild. Everything loaded and is working properly except itunes. Downloaded itunes and installed. Will not connect to internet. Keeps on trying to connet to itunes store, but never connects. If I insert a CD all I get is the track number. No artist or song information. Operating System Windows 7 Home Premium.
Hello Rachet Jaw,
Thank you for the details of the issue you are experiencing with iTunes. I found a few articles I suggest for the issue you described.
If you are getting a white screen when accessing the iTunes Store, I recommend reviewing this article:
Apple software on Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123
If you are still not able to access the store or are getting a different error than just a white screen, I recommend the following articles:
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Thank you for using Apple Support Communities.
Best,
Sheila M. -
Hi all! I was updating the software on i pad to ios6, update was interrupted(apple update server is unavailable...). iTunes Diagnostics shows that "secure link to I tunes store failed". I use Windows 7 Home Premium 64 bit. Can anybody help please?
The following was done so far:
1. Windows Firewall - new rule created for itunes.
2. iTunes - latest version installed.
3. LAN setting : automatic detection of proxy is enabled;
4. iTunes diagnostics shows:
Microsoft Windows 7 x64 Home Premium Edition (Build 7600)
TOSHIBA Satellite L655
iTunes 11.0.2.26
QuickTime 7.7.3
FairPlay 2.3.31
Apple Application Support 2.3.3
iPod Updater Library 10.0d2
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 6.1.0.13
Apple Mobile Device Driver 1.64.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 003FB880034B7720
Current user is not an administrator.
The current local date and time is 2013-04-23 11:01:14.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
Intel Corporation, Intel(R) HD Graphics
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 11.0.2.26 (x64) is currently running.
iTunesHelper 11.0.2.26 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {1CB5BBC2-8124-4664-899A-CE0A4683E3B4}
Description: Realtek RTL8188CE Wireless LAN 802.11n PCI-E NIC
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Thu Jan 01 08:00:00 1970
Lease Expires: Thu Jan 01 08:00:00 1970
DNS Servers:
Adapter Name: {8140112A-43D0-41D6-8B36-BE146C811173}
Description: Atheros AR8152/8158 PCI-E Fast Ethernet Controller (NDIS 6.20)
IP Address: 10.5.7.196
Subnet Mask: 255.255.0.0
Default Gateway: 10.5.0.1
DHCP Enabled: Yes
DHCP Server: 172.18.255.2
Lease Obtained: Tue Apr 23 10:14:40 2013
Lease Expires: Tue Apr 23 22:14:40 2013
DNS Servers: 121.97.59.7
121.97.59.2
121.97.59.3
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was unsuccessful.
The network connection timed out.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
The network connection timed out.
Last successful iTunes Store access was 2013-03-22 10:05:31.
@@@. iTunes IS ENABLED THROUGH THE FIREWALL , even though diagnostics says "NOT enabled"hours after the first post i somehow got this to work. dont know how, but i do tried the dns clear cache, the clear host file, oh and i did the check automatically detech dns AND THEN se-check it again before i got this to work.
-
Unable to load ITUNES onto PC HP, windows 7 Home Version. Error message reads "Application Application Support not found". "Uninstall and reload". I have done that 4 times on Explorer and Firefox without success. Help??
I had gotten a similar problem, except with "provider services", i believe, but i solved it by copying sqlite3.dll from E:\Program Files\Common Files\Apple\Apple Application Support to E:\Program Files\Common Files\Apple\Mobile Device Support. doing that solved my first problem, but now i have been getting the error described in this topic (unable to load dataclass info... etc.). i tried reinstalling itunes (i already had 9.1.1, and thats what i reinstalled) by using the method described on apples site (using the "remove programs" tool in the control panel) and then downloading and installing itunes. when i opened it again, i still got the same error, and just now i got an error saying "the instruction at "0x00aadb6b" referenced memory at "0x00000008". the memory could not be read" it gave me the option to cancel and debug, or to press ok and terminate the program. I tried pressing cancel, and the popup went away but nothing else happened. a minute later the popup was back, so i pressed ok and itunes quit. Upon opening Itunes again, i got the very same error. sorry for the long post, but its really been bugging me. thanks for any help you might give, and if you need anymore info, feel free to contact me.
-
Hi there,
I'd like to ask you something:
I'm trying to synchronize all my iPod's (I have as many as 4 iPods: 2 iPod touch a 8 GB each and 2 iPod classic a 160 GB each) with my iTunes software (Version 11.3.1 which is installed on a Windows PC (Windows Vista Home Premium)). Unfortunately, the iTunes software refuses to run the command "synchronize with the iPod connected" regarding each and every iPod I have. iTunes just declares:
Synchronizing is impossible because I wouldn't hold the access authorization / rights for this operation.
I uploaded the songs at issue to my iTunes folder from CD's (all songs are in AAC format now).
What is this access authorization, why was something like that invented and what can I do to get it?
How do I have to proceed in detail?
What would it cost?
I am brand new here and have never ever made a post in any support community anywhere in the world in my life. Well, and I am not excessively knowledgeable about the particular computer or mac language but I know the very basics or can find out about them.
Anyways - can you help me please?
If you can't help me, who can do so?
It would be nice if you could answer me as soon as possible!
Thank you guys
Prying PedroYes, others have experienced the problem, a simple search of the forums would have revealed that and the simple solution.
Termporarily disable any security software on the computer. -
Windows Vista Home ( with SP2) constantly reporting that Safari 5.1.2 has crashed ( usual Windows prompt to close program) yet Safari is still running although loading pages slowly. Any one seen this recently ( note no recent install or changes to Windows
Windows reports that Safari stopped working . Windows Task Manager shows webkit2webprocess.exe process still running even after I respond to Windows prompt and close Safari ( Safari continues running after this action )
-
Having software problem, Windows 7 Home, how to format and reinstall
Having software problems, Windows 7. I have the HP P6510 desktop. I have backed up my data to ext. drive, and I have the Windows 7 Home CD which I purchased.
Most of the reading I've done to "format & reinstall" seem to say I don't need to format...just put the Windows 7 CD in and restart...is that all I have to do...I don't have to format the HD?
If I have to "format" the HD, how?
PS:(Last time Computer was in for repair, they replaced the Windows 7 program so product numbers may be different.)Hi:
You may want to read this step by step tutorial to install W7.
http://pcsupport.about.com/od/operatingsystems/ss/windows-7-clean-install-part-1.htm
However, to answer your question, you should not need to repartition or format the hard drive unless you want to.
Windows 7 will install on the current windows partition creating a windows.old folder, which you can delete after W7 is installed.
Having the windows.old folder is nice for folks like me who forgot to save a file or folder. You can just browse to the Windows.old folder and retrieve any file or folder you want and copy it to the new windows installation.
When you are sure you have gotten all of your files from the windows.old folder you can delete it by launching the disk cleanup utility and then click on the Cleanup System Files button in the disk cleanup window.
Then just check the windows.old folder on the list of files and it will be deleted once you hit the OK button.
If you delete partitions and reformat, you will lose the option of having the windows.old folder.
The tutorial at the link above will step you thru the process of formatting the drive.
Maybe you are looking for
-
I recently installed DoubleCommand and right away, it caused a Kernel Panic. I didn't associate the two before, but now I hear it causes them. Next, I tried partitioning my drive for XP, and halfway through the partition, another kernel panic. This s
-
Multiple tables in ALV / Normal report
Hi, I have an internal table ,INT with 4 fields a,b,c and d. i want to group the table by field A and display report. I want to display report in groups .. for ex: PERSAREA NAME AGE 0001 sfsdf 45 0001
-
Recently, when I hit the "red X" button, instead of just closing that page and taking me to the previous page, it completely takes me out of Safari
-
Printing Issue: Colors print fine from Photoshop but washed out in Illustrator
I am having trouble printing from Illustrator. The same image...whether cut and pasted, opened in, or using the swatch created....prints differently in Photoshop and Illustrator. I need to use this specific color (for branding purposes) and it prin
-
Hi, I noticed that when I use the scientific calculator on my ipod touch 4th generation, the parentheses don't work. How can I fix that?