Nano software not installing with usb 1.1

I'm having difficulty getting the initial setup to run on my Windows XP computer. I apparently have USB 1.1, the Apple software during installation will tell me i need to format my Nano, then after an hour or so tell me an error occured and to try again?
Any advice?

Jared
try some of the recommendations on the following page:
http://docs.info.apple.com/article.html?artnum=61711

Similar Messages

My i-pod nano did not come with the CD to install software.

My i-pod Nano did not come with a CD to install the software to computer. How do I install software without CD?

The second generation iPod nanos do not include a CD; instead, download and install the latest version of iTunes on your computer to install the iPod drivers.
(18706)

Software not installed correctly to communicate with ipod -Tryed evrything

Hello i am geting the "Software not installed correctly to communicate with ipod" error. I tryed everything on http://docs.info.apple.com/article.html?artnum=93716 nothing worked. I need help for a fix. I was having error 2095 before then i fixed it. Now im having this problem
Ipod: 30 gig video
Computer: HP a1112n

Itunes ver: 6.0.2.23
that rules out one set of possibilities.
okay, we'd better check on the following two possibilities then. (the second one has shown up in itunes 6.0.0.18, 6.0.1.3 and 6.0.4.2, so it's a live possibility with a 6.0.2.23.)
The Tick 247: iTunes not recognizing your nano? Here's a possible solution!
markinmadison: Re: "The software required for communicating with the iPod is not installed..."
love, b

3rd gen iPod Nano will not sync with latest version of iTunes. It passes the connectivity test but not the sync test under diagnostics. Worked fine on old Windows 7 laptop but not new one. From Control Panel it shows up as an Apple iPod USB Device...

3rd gen iPod Nano will not sync with latest version of iTunes on new laptop. It passes the connectivity test but not the sync test under diagnostics. Worked fine on old Windows 7 laptop but not new one. From Control Panel it shows up as an Apple iPod USB Device...

Never mind, I think. I think I figured it out. There was 1 song (out of > 900!) that somehow had been purchased with the other ID - I have no idea how. Once I deleted that song, it stopped asking.
There may be something with the newest iTunes version too. I didn't think in older versions that the "On this iPod" list of songs was greyed out. But at least it syncs ok.

Software not installed correctly to communicate with ipod/iphone. This message appears when itunes is opened

software not installed correctly to communicate with ipod/iphone. please install again

Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

Apple Mobile Device Suppurt not installing with iTunes 10.6.3

Hey guys, any help with this would be much appreciated., I had an issue a couple of days ago where I couldn't reinstall the latest itunes (10.6.3) I have now managed to install this current version but with one major problem, Apple Mobile Device Support didn't install with it. I tried everything, I've tried uninstalling itunes and reinstalling it again with and without the anti virus turned on, I've tried a system restore, I've tried using an old version of Apple Mobile Device Support, and still nothing.
My itunes keeps saying this whenever I plug in my iPad, "This iPad cannot be used because the required software is not installed. Run the itunes installer to remove itunes, then install the 64bit version of itunes" I've done that, it didn't work, however, itunes has managed to install successfully on my desktop pc, which is Windows XP, with apple mobile device support, but the machine I'm having trouble installing itunes with Apple Mobile Device Support on is my Laptop which is running Windows 7. I doubt this is a problem with my laptop, the system restore I did confirmed that, and the issue only returned when I tried reinstalling the latest itunes.
Is this problem with Apple Mobile Device Support not installing with the latest itunes a bug? i hope so, because I've read up ways to solve this problem but alot of it gets too technical and I'm not the most technical person when it comes to computers and all that.
Is anyone else having similar problems, if so, how did you solve it?
Thanks, hoping to hear back soon

I've also read somewhere about using Win Rar to extract files to do with apple mobile device support from the itunes installer file, would you recommend that to? I don't really fancy the idea of doing anything that involves my registry because knowing me I'll end up screwing my laptop up for good lol
It's a little more involved than just doing a standalone AppleMobileDeviceSupport64.msi install, I'm afraid. The relevant drivers in AMDS are not digitally signed for 64-bit XP, so you have to force XP to accept a driver install that it would try its damnedest to not do. There's no driver issues for other 64-bit componentry in the installer package (I think the GEAR drivers install on XP 64-bit systems), but I believe there's still a bit of fancy footwork involved in getting them installed too ... although it's been a long time since I've looked at an instruction set, and I might not be recalling those things correctly. (So if you're not comfortable with system modifications, it might be best to steer clear of the Orca-based techniques ...)

HP Lazer Jet Pro 200 not installing with Windows 8 64 bit

My brand new HP Laser Jet Pro 200 MFP M276mw is not installing with my brand new Acer One725-0487 Netbook that has the Windows 8 64 bit operating system. I bought them both at Office Depot this week. I downloaded the software of HP.com/support and when I go to setup the wireless function (Loading from the Acer to the printer) it takes a long time and gets to 99% complete and then has a terminal failure (two times).
Can someone please offer some advice on how to get past this. Thanks very much, Mark

MarkVanWho,
I am glad you got it all resolved. Let us know if you run into any other problems Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Error message is showing while connecting to itunes - "This iphone cannot be used because the required software not installed. Run the itunes installer to remove the itunes, then install the 64bit version of itunes - Pls Help

I tried to install in my Sony Vaio Laptop - Model Name SVF15218SGW Serial No 54****************954. After installation of itunes, when i am trying to connect error message is showing as follows -
"This iphone cannot be used because the required software not installed. Run the itunes installer to remove the itunes, then install the 64bit version of itunes".
i already installed 64bit version. but not connecting my iphone with itunes
PLEASE HELP.!!!!
<Personal Information Edited by Host>

Hello Negaz
When you uninstalled iTunes, did you uninstall it by using the article below or just uninstalled iTunes? The best practice is to remove not only iTunes, but also other associating software in the order that the first article give. If that does not work, then check out the second article for more troubleshooting options for connecting your iPhone to your computer.
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/ht1923
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Regards,
-Norm G.

SP3 not installing with Snow Leopard

I've been trying to reinstall Windows XP partitioned on my new mac along with Snow Leopard. The Service Pack 3 will not install with the XP and many errors pop up. I do have SP2 installed and windows is running fine except when trying to update the software to SP3.
On 10.5, I could install the SP3, but had to add a bit of code as per this url: http://www.windowsreference.com/general/error-there-is-not-enough-disk-space-whe n-installing-sp3/
Any thoughts or solutions, please?

I think I just found the solution:
http://support.apple.com/kb/HT3841
I'll try it and hope it works.

Oracle Software not installed

Hi!
I tried to install SAP NetWeaver 7.1 with Oracle 10 under Windows Server 2003 64bit in english fully updated. But I ran into two problems which prevented the SAP installation to finish : first once all the oracles updates were installed, the oracle wintows service would not start; second sapinst never managed to find the oracle installation and always answered "Oracle Software not installed".
For this installation I downloaded all the installation files from the SAP download center like this :
     - On http://service.sap.com/swdc in the left frame : download/installation and upgrades/entry by application group
     - then in the center frame : SAP NetWeaver/SAP NetWeaver/SAP NETWEAVER CE 7.1/Installation/Windows Server/Oracle/
     - I added everything to the Download basket but "Oracle 10.2.0.2.0 Patch for AIX 64bit" and "Oracle 10.2.0.2.0 Patch for Solaris 64bit"
- then I took the last patch for Oracle 10 on the SAP download center :
     - on http://service.sap.com/swcenter-3pmain in the left frame : Oracle/Oracle 64-bit/Oracle 10.2.0 64bit/Oracle 10.2.0.2/NT_x86_64
     - I added the last patch to the download basket
Then I followed this installation steps :
installation of the last jdk : jdk-6u3-windows-i586-p.exe
installation of Oracle 10.2.0.1 with : Oracle10.2.0.1-51031678\NT\I386\sapserver.cmd
installation of the last update for oracle 10.2.0.2 with : DVD_ORACLE_10.2.0.2_Patches_WIN_AIX_SOL\NT\I386\setup.exe
     => I had a problem with the installation of the patch chich detected the wrong version of windows so I forced it with : OPATCH_PLATFORM_ID=233 (I checked it before, it should really be the right one)
installation of the last patch of oracle :
     - definition of ORACLE_HOME and addition of opatch to the PATH
     - execution of "opatch apply" in the folder Oracle-10202_Patch16_MSWINX86-64-6397030\
===> *PB* : the installation of this patch enables the oracle windows service which won't run and doesn't send any errors (just timeout). I didn't find any help on this one. When I tried to start sqlplus in console, I got errors about DLLs not found but they exists in the bin directory of oracle and are in the PATH...
installation of NetWeaver 7.1 with SAP NetWeaver CE 7.1 SP3 for Oracle - 51032969\DATA_UNITS\CE71_03_IM_WIN_X86_64_ORA\sapinst.exe
       - normal installation + JavaEE + CompEnv
          - Media Browser - RDBMS Client Oracle : Oracle 10.2 Client - 51033272\OCL_WINDOWS_I386\LABEL.ASC
===> *PB* : at this point of the sap installation, I got an error "Oracle Software not installed" without any details. I didn't find any help on that either. It seems to come from a registry key missing...
After that, I uninstalled (with removal of the right keys in the registry to have something clean (<a href="http://download.oracle.com/docs/cd/B19306_01/install.102/b14316/deinstall.htm">url</a>)) Oracle many times and tried different installation steps : without the patches, with the patches but without the update (doesn't work), with the patch 15, with the patch 16. In each cases Oracle service wasn't working if a patch was installed. And in each cases the sap installation never detected an Oracle installation. This installation steps are very reproductibles and are problemful.
Could anybody have some pointers or help on that one ?
Thanks in advance,
Florian

Hello Friends,
I tried the AMD64 based Installation Source to install Oracle 10g. and It works.
I also applied sufficient patches (AMD64/x86_64 based) to Oracle, as required. It worked fine, without giving that "Platform not compatible" error, as it was giving me before.
Now,I have got that , my machine was expecting x86_64 based Installation of Oracle .
I was little bit confused between x86, x64, x84_64, I386,etc..etc..terms...
Thanks to Markus and other friends.
The problem was due to mix installation of 32bit + 64bit Oracle Software & Patches. Previously, i installed i386 based Oracle, which is 32 bit version. Then i tried AMD64 based Installation source of Oracle RDBMS. It workes.
Previously, I was applying x86_64 based Oracle patches 16 & 17 on 32-bit Oracle version, thats why definitely it was giving error of "Platform not compatible", because it was expecting 64Bit Oracle version to implement that patch.
But, now, i successfully applied these two required Oracle 10.0.2.0 patches(16 & 17),on this 64Bit Oracle. (AMD64 based Installation source).
Then, I had run SAPInst of Installation Master (Win_x86_64) and started the Installation again. I also gave Oracle RDBMS Client Source location (x86_64 based). Then, also provided other required parameters. Now, the SAPInst worked fine, without that "Oracle Software not Installed" error.
And, Ultimately I successfully installed the SAP NetWeaver CE 7.1 on 64Bit Oracle 10g Database Software. Right now, the Server is working fine, without Errors.
Thanks Again.....

HT1414 My Nano will not sync with iTunes.

Nano will not sync with iTunes. I get an error to retry or to reinstall. I've tried most of the troubleshooting suggestions on the website. I have not reinstalled. My iPhone and iPad both sync with no issues. The computer recognizes the Nano. Is reinstalling my only option? This started when I tried to update my devices with new music. I noticed the error the next morning before my run and my Nano all the sudden had no music. Went to re-sync and I received the error.

It could be a number of issues, such as the soddering that connects the 30-pin adapter that then connects to your computer could have come loose. However that is unlikely unless you have dropped your device a lot. But for anyone to be of more assistance you will need to provide more information. Such as: does the divice still show up in iTunes? If not then you may have to put it into DUF mode, or you could bring it in to your nearest apple store and see how much help they can be. Caution: once in DUF mode you should be able to restore the device to its orginal settings and the newest software, but you will have to re-sync your libary, redo all of your selections ect. unless you have a local backup on your coumputer which you should be able to acess by [option]-click the restore button and selecting the latest backup, (at least I believe its [option]-click).
Hope this helps.

Do we need all those software pre-installed with N...

If you look at the application manager after you install V30 firmware, you will see that there are many software pre-installed with it.
When the phone starts, the main standby screen goes out for a second now, and it is obvious that these programs use alot of phone's resources.
Do you keep them? Or have you already deleted them? If you have, which ones? Do you think we need them? Or if we deleted them the phone might not work properly?
I just think that those software use alot of phone's resources. They were not there with V20 or V21.
Any Suggestions? Thank You.

20-Sep-2008 12:55 PM
grschinon wrote:
I know I have noticed it once or twice but it doesn't bother me really. As long as it only does it on the standby screen and not while watching a video, for example (which is the case as far as I can see), I'm not really sure what the problem is. And yes, the screen does go blank for a second or two at startup, but there too it's only once so it doesn't bother me either.
A lot of the software can be got rid of. You can start by uninstalling N-gage if you don't have any intention of using it. That will also get rid of a certain number of other things in the application manager. I also got rid of the "Welcome!" application and the "settings wizard". All in all that'll removed about 15MB of stuff.
This screen refreshing does seem to be doing it only on "Standby Screen." Not during other activities such as watching a video or something. But it is so rare, so nothing really bothering though. I just wanted to let people know not to panic, that's all. You may see it someday.
About uninstalling software, what about those weird programs like adlib, stuff like that. Do you think I can delete everything on Application Manager?

WAE 674 Disk based software not installed.

Hi,
Have an WAE 674 with 4.4.3c installed, with problem.
Using WCCP and I am able to logon to the device.
Have this msg and in in the CM it is down.
System Initialization Finished.
Disk based software not installed.
Some applications may not run correctly!
Any sugestion?
I have reload still problem.
Regards Jan Rockstedt

What steps did you take to resolve the issue? I have the same issue on WAVE 594 running 4.4.5.
I get the error message when I telnet into device.

CNA 6 InstallShield Wizard will not install with a JVM not found message

I ran CNA 5.5 up until last week when Java 7 71 update hit. When I tried to launch, I received JVM Not Found, that was all. So I figured it was time to install CNA 6, however during the install process I now get a pop up box stating InstallShield Wizard will not install with a JVM not found message. No other error messages, no logs, and the installation ceases. Tried installing CNA 5.8.9.1, and CNA 5.5 again, all stop at the same point with the same message. Anyone else see this issue?

When you start Network Assistant, Java determines whether the resources it needs are available. If they are not, Java displays the message Could not create Java Virtual machine, and the session ends. To overcome this problem, open the file C:\Program Files\Cisco Systems\CiscoSMB\Cisco Network Assistant\startup\startup.properties (the default installation path), and modify this entry:
JVM_MAXIMUM_HEAP=1024m
Replace 1024m with a lower setting that does not exceed the available RAM. There is no way to foresee what value will work. Try 512m , and lower it further if necessary. You can use the dial peer tag range 2500 to 2999 out-of-band to define your own dial peers.
If the Network Assistant InstallShield wizard fails to start, it is likely that the temporary folder location defined through the environment variables TMP and TEMP has some problem. Assigning a correct temporary folder location can fix such problems.
Source: http://www.cisco.com/c/en/us/td/docs/net_mgmt/cisco_network_assistant/version6/relnotes/ol32368.html#pgfId-840748

My Mac Mini will charge - but not sync with - USB-connected devices (ipod, camera, memory card reader). How do I fix it?

My Mac Mini will charge - but not sync with - USB-connected devices (ipod, camera, memory card reader). I have tried unplugging the devices, restarting the computer, selectively unplugging and plugging in the devices, closing and opening the relevant applications (iTunes, iPhoto, etc). I have tried using different USB cables.
It's like all of a sudden the synching service stopped functioning or recognizing these devices for some reason. The other ports work just fine (monitor).
The only USB-connected external device that appears to be unaffected is the USB SuperDrive and it works on all the USB ports into which I plug it.
How do I fix this?

Open Console in Applications>Utilities & see if there are any clues or repeating messages when this happens or doesn't happen.

Nano software not installing with usb 1.1

Similar Messages

Maybe you are looking for