Nano stops playing after a few seconds

I tried everything and I did not do the new download. I thought it was a problem with the player, but it wasn't. I found a small piece of lint in the headphone jack. I couldn't believe it, so if any of you are having trouble with your Nano shutting down, check for lint.

Thanks for sharing your solution!
B-rock

Similar Messages

"AU audio file player" stops playing after a few seconds

Hi there,
i use "AU audio file player" in my concert set up.
It worked fine til yet, but now it just stops playing after a few seconds.
The track is 3 minutes, but it stops suddenly.
I tried to reload the tracks and tried loading the "AU audio fle player" into a new session,
but it still stops playing in any of the sets.
Any idea?
Thank you very much, S

Hi Susanna,
I did not find a way to trigger it from the keyboard...
So I decided the following: I made a short cut for QuicKeys which opens the AUAudioFilePlayer and starts the loop I need. A quick solution which works with just hitting one key on the computer and the loop player starts. This works pretty well with QuicKeys but not with MS, the problem: sometimes when I choose by double clicking the AUAudioFilePlayer a black window shows up and only the name is readable, nothing else. I have to close it, reopen it and then- perhaps- the AU shows up and I can push the play button. Do you now that problem?
R.

My music file did not download correctly and stops playing after a few seconds.

My music files did not download correctly from itunes and stop playing after a few seconds.

Assuming you are in a region where you are allowed to redownload your past purchases, delete the current copies from your iTunes library and then download again from your purchased history. If the problem persists, or that facility is not available in your region contact the iTunes Store support staff through the report a problem links in your account history.
tt2

Audio stops playing after a few seconds when importing a HD clip

I have CS4 running on Enterprise version of Windows 7 64 bit on the following hardware:
Processor: Intel i7-970 Hex core Gulftown
Motherboard: Asus P6X58 Premium
RAM: 24GB Kingston DDR3 1065
Video card: Nvidia Geforce9800GT
Four hard drives, system disk is stand alone and the other three are split in groups of RAID0
When I import a HD clip from file (EXCAM EX 720p60p) the audio will play in the source window or the timeline for a few seconds and then quit. If I edit the clip in Soundbooth, from the timeline, the waveform quits at the point that the audio stopped in the timeline.
This behavior is very sporatic; sometimes it happens and sometimes it doesn't. Closing the program and restarting sometimes solves a certain clips audio problem, sometimes it doesn't. Yesterday I worked all day without it happening but today it is happening every few clips. Some I can fix by restarting Premiere, some I can't.
If I import the clip from Bridge to Soundbooth the audio waveform is just fine.
I have seen this problem discussed several years ago but never resolved in that discussion. Any ideas?

Yes! I imported the entire BPAV in a file on my scratch drive under the specific project folder. From there I am using the media browser in CS4 to either preview the clip or import it into the project. The audio drops out whether it is previewed or imported. And as I have said, this behavior is not consistant. I have yet to find a repeatable cure.
Also as I have said if I import the offending clip, from the same folder, into Soundbooth using Bridge the waveform is fine. If I import the same clip into Soundbooth from the Premiere timeline the waveform goes flat where the audio stopped in Premiere.
Thanks for the quick replies.
I am readingthe article that was suggested soon.

Burned CD is distorted and stops playing after a few seconds

I burned a cd in the usual manner with itunes, but the cd is distorted and stops playing in the cd player. I have burned dozens of cds in the past with no problem. Is this caused by the recent update?

Try a different brand of cd; I recently had this happen. It freaked me out at first, but after switching brands it never happened again.

Sound stops playing after a few seconds

Hey all. I juz transferred a song to my iPod. The song plays for 16 seconds and then it juz automatically skips to the next song!! It's frustrating. The song played juz fine on iTunes and WMP though. Any solutions guys?

I'm having the same problem many times over! I have about 250 songs on my IPod Nano and about 25-30 of them do this. They start to play and about 10-15 seconds into the song, they skip to the next one. A few of the songs even get almost to the end and then skip. Its VERY frustrating. I have reset, restored, and even re-formatted the IPod to no avail. It happens with songs purchased from ITunes as well as songs I've imported from CD's. The songs play just fine on the computer, just not on the IPod. If someone can help with this I would really appreciate it!!

I have upgraded iTunes now it stops working after a few seconds.Help?

i have upgraded iTunes now it stops working after a few seconds.Help?

Hi Andrew,
If you have issues with iTunes unexpectedly quitting you may find the troubleshooting steps in this article useful -
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/TS1717
If you are using Windows XP, you may want to use this article -
iTunes for Windows XP: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/TS1421
Thanks for using Apple Support Communities.
Best,
Brett L

My iPod shuffle stops playing after a few songs, then it won't start again.

My iPod shuffle will stop playing after a few songs which is very frustrating while out walking. I end up having to shut it off for about a minute or two and then turn it back on. Sometimes it will start playing again, but it will start playing the same songs over again. I can't go forward or go back. When I try to skip a song, all I get is dead air. I took it back to an Apple store and they replaced it free of charge; which I thought was great... that is until the new iPod started doing the exact same thing. I've downloaded songs from the iTunes store as well as songs off of my personal CD's. I've tried deleting all the songs and re-installing them... nothing seems to solve this problem. I know it only costs $50; but if Apple can't get a $50 item to work; why in the world would I want to invest more money in an Apple product? It's a good thing this was a gift.... I'm just not happy with this product and there doesn't seem to be a good explanation for this.

I Just ran into the same issue:
My iPod shuffle 4th gen would just stop playing, and I had to turn it off, wait 10 secs and the turn it back on.
Then it would get stuck at the same place.
I Even exchanged the iPod for a new one since I had just bought it.
re-synced my playlist and same issue!
did a restore as described above - same issue.
Solution in my case:
one of the songs in my playlist seems was "corrupt". Even trying to play the song in iTunes on the PC did not work, kept getting the message "This computer is not authorized ....", even though the computer is authorized.
So somehow that song being on the shuffle crashes it.
After I removed that song from the playlist and synced again, the problem was resolved!
So try to play all the songs that you want to sync to your shuffle on your computer, maybe you have one song that was not downloaded properly or is otherwise corrupt.
- Deleted the song from the local library
- re-downloaded the song from iTunes store
- now it was playing fine on the PC in iTunes
- re-added it to the playlist, re-synced iPod shuffle
all is working fine now, shuffle no longer freezes.
hope that helps someone else....

Touchscreen stops working after a few seconds on new iPad 2

The touch screen would stop working completely a few seconds after turning on. The iPad is still running fine -- Home/Power/Volume buttons work perfectly. But not the touch screen. I can not control the iPad except turning it on/off or turning the volume up/down.
Tried resetting the unit by holding Home and Power buttons. Still the same issue after rebooting.
Tried restoring the iPad completely from iTunes. With a clean iOS the touch screen still doesn't work.
Leaving the unit untouched for a few hours, then the touch screen would start working again.... for another few seconds. Then it stops working.
This is a replacement iPad which Apple Store gave me, but I'm out of the country now and there is no Apple Store where I am. How can I get this fixed?

1. i connect the device to usb power
The Stor.e Wireless Adapter should be connected to mains power and the other end to the external HDD.
Then you could use the app to access the content wirelessly.

Button stops working after a few seconds

I created a button in Adobe Captivate, which is used to jump
to an URL. When I run the published swf, the button correctly loads
the URL, but after a few seconds, the button does not load
anything, even when the browser window of the URL that was loaded
initially is closed. In other words, the button can be clicked but
it does not do anything. This loss of functionality occurs after
approximately 3 seconds of running the SWF.

Hi again
You said you have three buttons on the slide with two of them
configured for "No action"? Why? What is their purpose if you are
doing nothing when they are clicked?
You also said the buttons aren't pausing. If the buttons
aren't pausing the slide, it is probably simply playing and ending.
Sounds like you are expecting the slide to pause, so I'm confused
as to why you removed the pause action from the buttons.
Cheers... Rick

Why does my ipod classic stop playing after a few songs?

why does my ipod classic stop playing after just a few songs?

is your battery charged? How many songs do you have on the playlist (if you are playing a playlist when it stops)? I know that when the earbud wires are accidentally disconnected from the ipod body, the music stops automatically.

TS2972 moviea stop playing after a few minutes

While movies start playing they stop streaming after a few minutes seems like streaming is trying to catch up any ideas on hiow to solve this issue?

Sorry to hear about the troubles you guys are having with the DVR. There could be two explanations for this. Either the error is within the box or the feed being sent for that channel. To address this if it's a problem with the DVR functioning, please press menu, then go to CUSTOMER SUPPORT, then IN HOME AGENT, then SET TOP BOX AUTO CORRECTION. Let me know if you need further assistance after doing that.
Anthony_VZ
**If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

Stor.E access point stops working after a few seconds

Purchased a Stor.E Wireless Adapter and followed instructions but after turning the device on by connecting to USB power using supplies cables, WIFI access point disconnects after 4 or around seconds.
1. i connect the device to usb power
2. Power light blinks green and stays on
3. wireless light becomes green and stay on, turns off after a few seconds
Managed to connect to it using the mobile app a few times, while its on, but since the WIFI point disconnects, cannot use it.
Any thoughts ?

1. i connect the device to usb power
The Stor.e Wireless Adapter should be connected to mains power and the other end to the external HDD.
Then you could use the app to access the content wirelessly.

3G stops booting after a few seconds

My wife's 3G (3.1.3) crashed last night. I shut it down but I have not been able to get it to boot. The apple logo appears and then the screen goes black after a few seconds. It does this if I start it with the power button or if I start it by holding down the home and power buttons. I have been able to get it into restore mode by holding down the home button and plugging it in to the computer. I would like to try to save some photos on it that were taken since the last backup before I try the restore. Any suggestions?

It seems that others are having the same issue:
http://discussions.apple.com/thread.jspa?threadID=2504981&tstart=0

Ipod stops charging after a few seconds

My 4th gen ipod stops charging after 6-8 seconds of being plugged in. Since the battery is dead, the black screen with a red battery pops up whenever it's plugged in and then disappears after 6-8 secs or being unplugged. Both the home and power buttons are broke so I'm unable to activate in any way besides plugging it in.

Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Nano stops playing after a few seconds

Similar Messages

Maybe you are looking for