Nano turns off after unplugging from computer

My nano works fine, if its plugged into my computer. When I eject and then unplug it turns off and I can't get it to turn back on. Once I managed to unplug and get it to turn on, then turned it off then I tried to turn it on again 5 mins later but nothing. Battery says it's off and I go through making sure everything is off or paused at least before unplugging but same result everytime.

I think this is ridiculous. I got the iPod nano 4th generation (8gb) this summer and my click wheel isn't working. Apple is making a huge mistake by ignoring our emails which could lead to business loss.
But!! I know how to get it working (for a while).
You just leave your ipod alone for about a week or two. And it's completely responsive. But unfortunately if you plug it into the computer, the wheel will become unresponsive again. It costs more to fix than to buy. <-- Crazy
The only thing is that i've lost the reciept ¬¬' But if you go to an official apple store. I've got a great excuse or whatever to why you deserve a new ipod or money back. It is 3 years garentee and it has only been made for 2 years.
Going to the store soon so i'll see if i can give you guys some info.

Similar Messages

  • Nano fades out after unplugged from computer.

    Please.... is there any suggestions for a 2nd generation ipod nano that charges when plugged into the computer and plays music when hooked to a wall socket but turns off when unhooked from either one and wont turn back on. I have tried the toggle hold button with menu and select and i have tried the restore throught the itunes site. Anyone know what is wrong with it?? or what i can to to fix it?

    Sounds like the battery is dead. Rechargeable batteries can only be recharged so many times. For example, common laptop batteries can be recharged about 1500 times. I'm not sure how many times an ipod can be recharged. That's one of the problems with building the battery into the device. If it's any consolation, flash memory can only be written to so many times too.
    Most ipods are designed to be disposable. If they weren't, they would have replaceable batteries and store songs on memory cards (like digital cameras, for instance). Also, having Apple service them costs almost as much as buying a new one. Clearly, Apple thinks you need to buy a new music player every 2-3 years.

  • IPhone 4 turning off after unplugged from wall or PC/MAC

    Hi
    Can someone help please?
    I sold my iphone 4 recently and it was returned to me.
    The guy had it for 6 hours and it suddenly crashed apparently (this is his words)!
    He then tried to restore and it failed with unknown error 21.
    Im no stranger to resetting and sorting an iphone out but this one has me banging my head against a brick wall.
    I have tried to restore and the same error occurs.
    I have also tried entering into DFU mode etc and the same results.
    Volume up and down and resetting still no change. 
    I took it to the apple store as a last hope to see what they said and they dvised it had been tampered with so would not test any parts!
    Should i try a new battery? Or is this something else? Has anyone seen this before?
    Needless to say i am furious as i personally feel that this may have been a drop/water damage or jailbreak gone wrong or, even worse, a logic board swap SCAM.
    Any help would be great.
    Cheers

    Hi
    Thanks for the replies.
    I have this afternoon taken the phone to a third party repair service store.
    They took the battery out and used a fully charged battery, which i saw power another iphone.
    This did not fix the issue.
    The gent in the repair shop told me that it looks like a logic board fault. He also mentioned that it looks like it had been tampered with!
    He also advised that he has seen a huge increase of this sort of thing happening on ebay.
    He wished me luck with it and closed the phone up.
    So it looks like i am now left with a dead phone and a fight with ebay! :-(
    Cheers all. 

  • TS3474 Why does my iPod Nano turn off after one minute of use?

    I just got a new 16 GB iPod Nano and it turns off after one minute of use.  Why does it do this?

    I figured it out.  Headphones were not plugged all the way in.  This support community is awesome.  Thanks everyone.

  • Ipod nano turned off after playing for 5 mins even fully charged

    anyone, please help me. i bought this new ipod nano3rd gen. last nov2007. after charging it (full charge) after 5 mins of using it it suddenly shuts off... and this happens a few more times. i brought to the store where i bought the unit...they restore it to factory setting...but when i got home..the same thing happens. i filed a complaint at our DTI(dept. of trade and industry) so the store and i had an agreement to have it sent to an authorized service center in manila...after 2-3weeks they sent me a letter informing me that there were no defects found...it is said that it was set in automatic shut off... is there such a setting in ipod??? up until now i have not enjoyed my ipod...pleease..help me...

    even if it was restored to factory setting? it will continue on it's sleep mode? i was wondering...how come the person did not see this the first time i brought the item to them...and worst...while he was observing the unit(my ipod was fully charged then) the unit again turned off and he immediately plugged the ipod to the computer...
    btw, pls help me how to go to the sleep timer setting...so i could chek for myself too
    thanks for the reply

  • Turn off after unplug the power cord

    Hi,
    I have a MacBook Pro form 6-8 months and everything works great but from 2-3 days ago now everytime when i disconnect the power cord from the computer the system turn off.
    I think the battery is good because i can use the computer only with battery (like im doing right now) and if i press the battery indicator button all green lights turn on and i can use the computer for 1-2 hours using battery only but for some reason if i connect the power cable again and disconnect later the computer is turned off.
    I install all updates by apple.
    not exist any kind of clear cmos, master reset or something like this

    this is the information from battery, say:
    Health Information:
      Cycle Count: 199
      Condition: Normal
    Battery Information:
      Model Information:
      Serial Number:          D86106118KKDGDMA9
      Manufacturer:          SMP
      Device Name:          bq20z451
      Pack Lot Code:          0
      PCB Lot Code:          0
      Firmware Version:          406
      Hardware Revision:          2
      Cell Revision:          157
      Charge Information:
      Charge Remaining (mAh):          1053
      Fully Charged:          No
      Charging:          No
      Full Charge Capacity (mAh):          6128
      Health Information:
      Cycle Count:          199
      Condition:          Normal
      Battery Installed:          Yes
      Amperage (mA):          -2710
      Voltage (mV):          10784

  • After loading the 1.1 update my nano turns off after 60 seconds.  is there a fix for this?

    After loading the 1.1 update for my nano ipod my nano shuts down after playing the music for 60 seconds.  Is anyone else having this problem and is there a fix for it?  Very frustrating to have to keep hitting the sleep/wake button and then play to make the music start again during my workout.

    You have probably fixed the problem by now, but I also just bought a Nano and it was very frustrating with the music shutting off before the first half a dozen bars of the song.  I rang Apple and they sent me this page.... (if anyone else needs help)
    http://support.apple.com/kb/TS3700?viewlocale=en_US
    All it was that I hadn't pushed the headphones in until they were flush up against the Nano.
    Thanks Apple!

  • Iphone turning off once unplugged from charger

    my battery is at least 30% but when I take it off the charger for a second it turns off and wont turn on until I plug it back into the charger, and this only happens on occasions (mainly when I am in a hurry). I just don't know why it does it, and its not like my battery is too low to keep the phone on. HELP

    Hi
    Thanks for the replies.
    I have this afternoon taken the phone to a third party repair service store.
    They took the battery out and used a fully charged battery, which i saw power another iphone.
    This did not fix the issue.
    The gent in the repair shop told me that it looks like a logic board fault. He also mentioned that it looks like it had been tampered with!
    He also advised that he has seen a huge increase of this sort of thing happening on ebay.
    He wished me luck with it and closed the phone up.
    So it looks like i am now left with a dead phone and a fight with ebay! :-(
    Cheers all. 

  • [Zen Micro] Keeps shutting down after unplugging from comput

    I have owned this player for a year and three and a half months now. I had sent it in for repair before the warranty expired because I kept getting annoying feedback into my earphones. Unfortunately, they didn't fixed it and just sent it right back costing $25+S/H. I went on installing the firmware and loading my music up just fine, but when I unplug it from the computer, it shuts down. I tried several things such as reformatting the thing, but it didn't work and I hadn't checked out the sticky firmware thread so I just left the player alone very frustrated until now.
    I managed to reload the firmware again thanks to that thread but I still have the automatic shut-down problem when disconnecting from the computer. I did noticed that after I unplugged it, the power bar wasn't there before it shut down.
    Your ideas are appreciated but please make sure it's not about sending it back to them. It's out of warranty.
    Note: It does work again after I replace the battery, but I don't want to do this every time I want to load music onto it.

    Is there a sleep timer on the Micro? Did you check for that? (as opposed to Idle Shutdown)

  • MacBook Pro turns off when unplugged from outlet

    I have a MacBook Pro Intel Core Duo 2.26GHz
    2 days ago when I unplugged it from the wall it shut off. It has been doing this since even though the battery is fully charged.
    Once it is off I am able to turn it back on not plugged in and use it for the full length of the battery without problem.
    Anyone would know what would cause this? and how to fix it?
    Thx

    I would try the SMC reset.
    http://support.apple.com/kb/HT3964

  • Hello,My Iphone 4s sunk in waterscape for 5 min and turned off,After exit from water not work,I bougth my iphone from UAE apple store,How can you help me?

    hello ?

    We are users such as yourself and can only give advice:
    1. Dry the phone with a towell and put the phone in a plastic bag half filled with uncooked rice or silica gel pack and seal the bag
    2. Do not remove or try to start the phone for at least 3 days
    3. There is an extremely small chance the phone will start after drying this way, and even if it does, it's likely never to work well again and develop new problems in the future.
    4. Get an out of warranty replacement from Apple.  Unless you purchased damage inusurance, there is no warranty coverage for water damage

  • My nano turns off after about a minute.  Battery is charged

    I have a new Nano, the music does not play more than 30 seconds or so.  Battery is charged.

    This is usually an indication that your headphones are not plugged in all the way.  The white part of the headphones should be flush with the Nano and no silver from the plug should still be seen.
    B-rock

  • My nano is fully charged and when I use the earphones it comes with, the nano stops playing my music after a few seconds and turns off.  But when I use another earphone, it's okay and stays on. How do I keep the nano from turning off after a few seconds?

    Why does my nano keep turning off after a few seconds while I'm listening to my music?  It's fully charged and brand new.

    I've tried everything in the article "Troubleshooting iTunes for Windows Vista and Windows 7 video playback performance issues''. Here are my results.
    My computer meets the requirements.
    All software (Windows, iTunes and QuickTime) are up to date.
    As for updating my drivers, I found nothing labeled 'Video'. The closest thing I found in Computer/Manage/Device Manager was to click + next to 'Display Adapters' under that I found 'Intel (R) HD Graphics Family' which I right-cicked. From the menu, instead of 'Properties', I selected 'Update Driver Software...', then I selected 'Search Automatically for updated driver software'. I saw the messages "Searching for Software... Searching online for Software... The best driver software for your device is already installed. Windows has determined the driver software for your device is up to date." I got these same messages when I searched for updated audio drivers.
    My computer is already at the highest display resolution. (1366 x 768 recommended) That's as high as my resolution will go. Hmm, I noticed the article's example shows '(1920 x1080 recommended)'. Is my max 1366 x 768 resolution high enough?
    As for QuickTime, deselecting 'Enable Direct3D video acceleration' had no effect. Disabling the DirectX entirely (Safe mode (GDI only)) allowed the audio to play, but there was no video, only a black screen.
    As for turning on DMA, the only item under 'IDE ATA/ATAPI controllers' is 'Intel Mobile Express Chipset SATA AHCI Controller' So I right-clicked, selected 'Properties'. There's no 'Advanced Settings' tab in there. The tabs are 'General, Drivers, Details, Resources' no 'Advanced Settings' anywhere. So much for that.
    'Readyboost' was already set at 'Do not use'.
    No 'NVIDIA nForce Serial ATA (SATA) controllers' exist in my computer.
    The problem still exists. Please help.

  • HT204053 how do i turn off my iCloud from my computer if i have to restore my phone?

    how do i turn off my iCloud from my computer if i have to restore my phone? when i switch on my phone the message is
    "activation error" and when i connect it to itunes and click restore the message is "switch off your Find my iphone from the settings and then proceed"? what should i do now?

    Try this link for activation problems ...
    http://support.apple.com/kb/ts3424
    If you had iOS 7 BETA installed, just go to developer.apple.com and log in using your developer account.  (The BETA recently went past it's valid until date.)  There are discussions about this issue.  Otherwise...  for non-developers, I'm afraid you're on your on.  Use Google.

  • My nano starts playing a selection then turns off after one minute

    My nano starts playing a selection then turns off after one minute

    Problem solved for now.  Cleanded the jack port with a q-tip and pushed the cable in harder.  Seems to be working.  Thanks to all others who posted these past suggestions.

Maybe you are looking for

  • Volume is not working properly

    Volume is not working. When listen to music. Can't even see on the screen the button to control the volume

  • Adobe Connect Add-In 11.9.966  AppCrash

    I have Windows 7 Pro 64bit with IE11.    I have no issues connecting to an Adobe Connect room if the Connect Add-in is not installed.   Once I need to share my screen, I have to install it.   Once installed, the room reloads and I get the following e

  • SSIS calling from Agen Job

    i have SSIS to create Excel from SQL Query.  Once Excel created uploading to FTP Site, Using Script task When i run SSIS it works fine able to upload new file to ftp site without error. but when i run as SQL Agent , job runs successful but file is no

  • How to move master files between projects (within Aperture)

    I've imported 6,000 files into Aperture - all into one project, imaginatively named "Photos". Since I imported from a directory structure, underneath this Photos project is a nice structure of folders and albums organising my photos as I did on my ha

  • Rounded to two decimal places

    Hi Friends i need to do rounded to two decimal value of required view attribute(messageStyleText). How can i get the value-> round the value ->set this rounded value in same view attribute again. This thing planing to do by extending the CO. I extend