Nano with Pioneer cd-ib100

Is anyone using the Nano successfully with the Pioneer ipod adapter? I have a Pioneer AVIC-D1 with the ipod adapter but it doesn't seem to be displaying properly. I get only rudimentary navigation and no text display. I don't have any other ipods to test with the system.

I have no idea. I am going to contact Pioneer via telephone at 800-421-1404, technical assistance line 800-872-4159, and I am going to contact Apple via telephone at 800-275-2273.
The Pioneer CD-IB100 is for the iPod SERIES of devices, of which the Nano is included. It works as it is, but the interface is incorrect and the titles displayed only show eight characters. It's seen as a generic device "EXT-1". In the manual for the CD-IB100, it clearly shows that the iPod is to be shown as iPod in the function display, with an iPod icon on the touch screen.
Since the Pioneer CD-IB100 is NOT flash upgradable, it would take a software update to the iPod Nano to fix this issue.

Similar Messages

  • Nano and Pioneer CD-IB100

    I have the same problem with my Car Radio PIONEER AVIC X1R and the Adapter CD-IB100.
    I see on the screen of the radio "Ipod" and some title of songs, but the play of all songs is mute!
    I hope that Apple resolve this "bug" asap.
    bye

    You could try the restore function from within the ipod updater to enable audio out from the dock connector.
    And there is two IP Bus connections on the IB100 (IN and OUT) - only of them has audio output (not sure witch one it is, but you should try both). Doing these two things should probably solve your problem.

  • Problem with iPod and Pioneer CD-IB100 iPod adapter

    I installed this yesterday along with Pioneer DEH-P70BT. The headunit recognises the iPod as a source but the music is playing mute. Anyone else have this problem? Can anyone suggest a solution. I have tried the obvious like checking cable connections and resetting iPod....
    Thanks

    Make sure you'r using the correct IP Bus connection. There is only audio out from one of the two.
    And it is not enough to reset the iPod, you have to restore it from the iPod updater software.

  • 30gb Ipod and Pioneer CD-IB100 problem

    I recently had the Pioneer CD-IB100 installed with the Pioneer DEH-3800MP cd player. The sound quality is great but I am not able to use my Ipod to change the song, album, etc. The screen basically has the "Pioneer" logo and it says "ok to disconnect".
    I basically want to back out of that screen to enter the ipod main menu but i am not able to.
    i have tried restarting the ipod while connected to the adapter and while not connected to the adapter.
    i was able to access the ipod main menu in the past but for some reason, i am not able to do this anymore.
    i have also tried searching these discussions but i have not been able to find any help. i was going to try the pioneer website for help but their website is down.
    any help or suggestions?
    thanks in advance.
      Windows XP  

    any advice?

  • How do you use new ipod nano with itunes 10.6.3?

    How do you use new ipod nano with Itunes 10.6.3.  I have MBP and it lists itunes 10.6.3 as most current version and won't let me install itunes 11

    The seventh generation iPod nano requires at least iTunes 10.7 and Mac OS X 10.6.
    (85225)

  • I had an old iPod nano with my files saved on it and was stolen. I cannot find my old account. I bought an iTouch and made the new account that was needed for it to function. I was wondering how i could find my old account and get all the content back.

    I had an old iPod nano with my content saved on it and was stolen. As well, I can't find and access my old account that I had with it. I bought an iPod touch and made a new account so that I could use the iTouch. Anyone know how to find the old account and how to transfer data from the old one to the new account?

    This may help you find your iTune account:
    Frequently Asked Questions About Apple ID
    Without knowing your old account info there is nothing you can do.

  • Nano with Nike+ Freezes and Won't Play Podcasts

    I found this topic from 1.5 years ago and I'm having the same issue (http://discussions.apple.com/thread.jspa?threadID=1130986&tstart=390) . I can't find anything on a solution for this issue. Does anyone know of a fix? I've been using the work around of starting the Podcast first and then starting the run, but I'm running longer and would like to be able to listen to multiple podcasts.
    If I start a playlist from within the Nike+ menu it skips all podcasts. If I start a podcast, then start the Nike+, it works but will freeze up if I fast forward (right arrow) 'too much'. My ipod also locks up every couple of days when I start up a podcast (various podcasts). In fast it's done this since I got it a couple of years ago. I had it replaced by Apple because they thought there might be a problem with the ipod but this one has been doing it for years too.
    All I use this ipod for is running (I have a few others that don't support Nike+ - anyone know a way to get Nike+ working on a first get ipod Touch?) so I would like to get this resolved.
    I'm training for a marathon so I'll be using this a lot more over the coming months. I appreciate any help and suggestions.
    2nd Gen 2GB Silver iPod Nano with latest firmware
    OS 10.5.7 with latest iTunes
    1st Gen Nike+ receiver (bought when first released) with 3 different sensors

    A simple work around is to create a smart playlist. I was having the same problems, plus my nano would freeze when I tried to sync it with iTunes. I didn't try the smart playlist option with older versions of iTunes, but with the newest, it seems to work fine. I can play any and all podcasts in the playlist, move through them and select which I want to listen to while I run, and it finally syncs properly when my run is over. I just had to play with the parameters a bit so the playlist included the podcasts I wanted to listen to while I ran. Here is where I found the tip.
    http://nosugrefneb.com/weblog/89
    I haven't tried it with audiobooks though. Good luck.

  • Can I sync my ipod nano with my second computer/ netbook while travelling?

    Looking for some advice on how to connect my IPod nano with my second computer while travelling. That's what happened: I have my iTunes library on my computer at home and can sync my IPod nano (6 th generation, replaced onyl recently) with that library. While I was travelling and wanted to use my IPod I received an error message asking me to connect the IPod with iTunes in order to recover/restore (sorry, the message apeared in German, so I do not know the exact wording in English) . As I only had my second computer - a small netbook - with me, I downloaded iTunes and connected the iPod - only to receive the message that this Ipod would sync with another computer (sure!) and would I want to sync it with this iTunes library instead now? (Of course not, I did not dare because that library was empty!). So there I was with my computer with iTunes library at home and an iPod stuck in recovery mode and not doing a thing during my vacation. Any suggestions? If I have to take my great big workstation with me to get the iPod running again, I might just as well leave the iPod immobile at home. (;-)

    On your home computer connect your Nano, click on the name in iTunes, move right to the Summary tab then tick the box that says Manually Manage Music. You will now have to er, manually drag your music to your iPod, and manually eject it when done, but you will be able to add music from two different computers.

  • Can u charger your nano with a usb port thru the headphone port?

    I am wondering if you can charge your Nano with a usb headphone cable like one that comes with a Ipod shuffle?

    No.

  • IPod Nano with 1.1.1 software update and iPod Radio Remote

    I currently have iPod Nano with 1.1.1 software update and iPod Radio Remote, but even after the update I do't get the radio option to appear in the main menu or music menu, with the option in settings turn ON. Why isn't this thing working?

    hiya!
    just doublechecking something. are you connecting the remote directly to the nano, or are you connecting it to a Dock and putting the ipod in the dock?
    love, b

  • I have a nano with 500 songs that was synced with my old computer that crashed.  New iTunes account does not have these songs in my library.  I would like to move the music to the library so I can place them on my iPhone and/or iPad.

    I have a nano with 500 songs that was synced with my old computer that crashed.  Bought a new computer, now my music is not in my iTunes library.  I did the share thing but it didn't work. 

    http://www.yamipod.com/main/modules/home/

  • Trying to use a Nano with 10.2.8

    Alrigth, I just bought an iPod Nano. On the car ride home, I see that you need 10.3.4 to use it. I can't get that unless I buy a new computer... which isn't gonna happen. I have an iMac G3, 10.2.8,iTunes 6.0.1, and a highspeed 2.0 USB. Can I use the Nano with these settings? Do you know for sure?
    Please reply A.S.A.P!
    Thanks

    Alrigth, I just bought an iPod Nano. On the car ride
    home, I see that you need 10.3.4 to use it. I can't
    get that unless I buy a new computer... which isn't
    gonna happen. I have an iMac G3, 10.2.8,iTunes 6.0.1,
    and a highspeed 2.0 USB. Can I use the Nano with
    these settings? Do you know for sure?
    Please reply A.S.A.P!
    Thanks
    I'm using just this configuration. The only problem I have is the dreaded "Do not disconnect" message which never goes away. I wait to be sure all downloads are done, then eject the nano, and everything is OK.

  • I can't pair my nano with my 2013 honda accord

    When I try to pair my nano with my 2013 Honda Accord, they don't even recognize each other.

    As far as I know, that is not supported via Bluetooth.
    Barry

  • I can not Connect my I Phone and my I Pod nano with my I Book G4

    I can not Connect my I Phone and my I Pod nano with my I Book G4. My iBook G4 is still runing on Mac OSX 10.4.11 so I can´t load itunes 10 and I can not Connect my I-Phone and my IPod to my laptop.
    The Question is: Way dose Apple dose not suupport their own products.
    Acctualy it smels a bit like designed obsolescence

    This is tru. I just don´t understand way it is possible to connect an IPhone with a windows PC runing on Windows XP but not with my Apple IBook G4.
    All I wont is to conect my IPhone and my IPod with my laptop. In oder to do that I have to buy a opperating system for over a 100 euro (additionaly: Leopard is no more in stoke and Lion dose not run on my laptop) as well as a more RAM for more than 50 Euro.
    It can´t be that hard to provide an access over an older version of Itunes. It seems like apple wont me to buy a new laptop.

  • Is it possible to sync your nano with the macbook pro without losing the songs already loaded on the nano?

    Is it possible to sync your nano with the macbook pro without losing the songs already loaded on the nano?

    Not if it's not the original computer you registered it on. 
     

Maybe you are looking for

  • I can't get my "String.valueof()" working

    Hello, I'm trying to create a method to search a string for a char with an if statement. I have created the following but it won't compile anyone know where I'm going wrong? public String string0 = "AEHIOUWY"; public char getCode(char aChar) if (stri

  • Based from my code, how do I implement an ALV grid using OO concept...

    Hello experts, I am currently practicing ABAP Objects and I would like to use alv in my report. Now, How can I implement ALV in my report in the simplest way possible. Sample codes will be highly appreciated. Thanks guys and take care! REPORT  z_aris

  • Cannot create a new project in iDVD

    Hi, Wondering if anyone can help with this? This was working fine but for some reason when I now open iDVD and try to create a new project,nothing appears on screen. When I click iDVD it gives me the options and I can click create new project and ent

  • Set proprty as value of another property

    my datacollector bean has refrenc of type data with 4 different properties <jsp:useBean id="data" class="com.custom.util.DataCollector" scope="request"/>         <c:set target="${data}" property="IP1" value="${param.subnet1}" />         <c:set target

  • Excel and pdf download link on report in development sandbox app

    I need assistance doing the following: 1) moving the download spreadsheet link from the bottom left to top right corner of the report page 2) adding a download pdf link next to the excel link (i believe i saw this was possible) I'm using the oracle p