Nano won't appear in Windows or iTunes...this is getting ridiculous...help!

I've had my iPod for about 4 months.
It isn't appearing in iTunes or Windows.
I've tried the 5 R's, none of which worked.
When I try and use the iPod updater to restore my Nano it just says "Initializing..." and after a few seconds it says "Invalid iPod service version" and shuts down.
My computer operates really slowly when my iPod is connected.
When I try to disconnect it, it takes ages...only to tell me that my iPod can not be disconnected.
So I have no choice but to just pull it out of the USB port.
When my iPod is connected, it just freezes on the "do not disconnect" screen...which doesn't flash, the screen simply freezes.
So when I disconnect it, I have to restart the iPod just to use it.
Please help I've been scouring the support site trying to solve this myself, and sorry for bothering you all with this common question, this is just a last resort as NOTHING I have tried is working.
Thanks.

I think its an external harddrive library issue bug in itunes<<<</div>
Nope. That's my configuration and no problems whatever.
I switch to Mac for less problems and have had more crashes, pinwheels and issues than I ever imagined<<<</div>
Is that your iPod problem? Please explain more.
Someone from apple must be reading this!<<<</div>
Nope. This is a user-to-user forum. Employees occasionally read posts but not as a regular assignment.
Have you tried the link that Kylene suggested?

Similar Messages

  • When i connect my ipod nano 2nd gen, it charges but does not appear in windows or itunes.  I tried the reset but it didn't work.  how can i fix this?

    I bough a 4g Ipod nano 2nd gen for my cousins birthday.  When i plug it into my computer it charges but does not show up in windows or itunes.  I tried reseting it, reinstalling itunes, everything the site said but it didn't help. I am trying to sync songs to it for my cousin, but it won't work with it not connecting.  Could the wire have something to do with it or is there a bigger problem here?

    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with             
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

  • BRAND NEW IPOD TOUCH WONT APPEAR IN WINDOWS OR ITUNES

    I just bought a brand new 8gb ipod touch and when i plug it into my computer the it lights up and beeps but nothing comes up on itunes or my computer. I have a working ipod video that syncs and is recognized by my computer everytime (even with the usb that came with my touch). I have tried uninstalling and installing itunes and that did nothing. I have had no computer problems to date and that included problems with my usb port. I dont know what else to do. It won't appear in my computer ANYWHERE!!

    the usb connections work fine with my other ipod and camera. The computer makes a noise when i plug my new ipod in so i know that its not the usb cable or the port.
    I have restored my ipod and when i go to put it into recovery mode it give me and error message (#1611) and wont let me continue.
    when i called apple they said that, that error means its a hardware issue but I exchanged my ipod yesterday and i am having the EXACT same problem so its not a hardware issue. The apple associate then told me to disable all my antivirus software because it could be somehow blocking the apple mobile device thing but nothing is working still and i am back at sqaure one.
    Please if you have any more suggestions. I am sure that there is just some setting somewhere on my computer that is off. is there a windows firewall setting i should be disabling?

  • IPod nano does NOT appear on Desktop or iTunes

    My mac gave me a message saying Itunes, and quicktime need to updated. I did so and my mac restarted. Afterwards my iPod Nano no longer appears on my desktop or in iTunes. (Actually my nano only appears when iTunes is closed.
    When I remove my iPod Nano then there is a message saying a device was removed improperly.
    I also have a 30 GB iPod. It will appear on the desktop and in iTunes. My iPod 8 GB Nano will not appear on my G5 ( I have two. One is running 10.5.2 and the other is running 10.4.11. Both with iTunes 7.6. The problem appears to be centered around 8 GB iPod Nano.
    I also plugged my ipod nano into firewire that plugs into an adapter that plugs into electric socket. AND still no response from my iPod Nano.
    Please advise........................
    Noppie
    <Edited by Moderator>

    Well start with these articles and see if that gets you anywhere...
    iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date
    http://docs.info.apple.com/article.html?artnum=305136
    iTunes for Windows: iTunes 7 doesn't recognize iPod
    http://docs.info.apple.com/article.html?artnum=304434
    iPod missing in "My Computer" or in iTunes for Windows
    http://docs.info.apple.com/article.html?artnum=61711
    Also you might try forcing the iPod into disk mode first, then connecting it to your computer and see if that makes it show up in iTunes...
    Putting iPod into Disk Mode
    http://docs.info.apple.com/article.html?artnum=93651
    Patrick

  • Ipod Nano won't charge or show in itunes

    I bought a used nano, either 1st or 2nd generation, not sure.  The usb charger that I use for iphone and ipod classic seems to work; it provides power to the nano.  But the nano will not charge (batter dead?) and it does not show in itunes.  I've gone through all the trouble-shooting steps, including putting it into disk mode, but it still will not show in itunes.  Is it just dead or is there something I can do?  I paid 50 cents at a garage sale so can't go too far wrong but it would be nice if I could get it to work.  Thanks!

    Hello there, danielsomers.
    The following Knowledge Base articles offer in-depth steps for troubleshooting the issues you are describing with your iPod:
    iPod's battery doesn't charge
    http://support.apple.com/kb/ta44551
    iPod: Appears in Windows but not in iTunes
    http://support.apple.com/kb/ts1363
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • My new ipod nano won't sync with my new itunes?

    I have purchased a new ipod nano and for some reason it won't sync with my itunes.  Please help

    Make sure the Enable disk use option is NOT ticked from under the iPod's Summary tab in iTunes. If you do have to remove this tick mark, be sure to hit the Apply button in the lower left hand corner of the window in iTunes to update the changes to your device. Then try restoring it again.
    B-rock

  • Ipod nano does not connect to Windows and itunes

    Dear All
    in my family we have 3 ipods: a shuffle, a ipod 20gb and a nano. While the first 2 are easily connecting to windows and itunes, the nano doesn't and does not recognise the USB port of my laptop[message 'unkwnon device']. I have tried, I think, most of the suggestion I found on the apple support and in the forum. Does somebody know any 'special' tip, my son is really getting frustrated by this situation because he can't get the same music. Please help. Thanks in advance
    ciao

    Hello franbat,
    Thank you for the details of the issue you are experiencing with your son's iPod nano.  I found an article with steps to address this:
    iPod not recognized in 'My Computer' and in iTunes for Windows
    http://support.apple.com/kb/TS1369
    Thank you for posting in the Apple Support Communities.
    Best,
    Sheila M.

  • Ipod won't connect to windows or iTunes

    I got an iPod touch 5g, and it won't connect to the computer at all nor in iTunes, this happened to me after I updated iTunes, before it worked fine. Please help and tnx. I'm running windows 7.

    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or                     
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - Then do the other actions of:
    iOS: Device not recognized in iTunes for Windows
    paying special attention to item #5
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

  • IPod won't turn on, won't appear in windos or itunes. What's broken?

    Pacient: 30gb video ipod
    Age: 1 year
    Symthoms: kinda dead...out of the blue! This ipod never moved in the last 1 year. it stayed in one fixed place, connected to the charger 27/7 and one day, it just stopped!
    I tried as many of the R's as i could. I drained the battery (or i think i did), i charged it over night (if it charges)...nothing!
    Won't restart (even though i hear/feel the hard drive spinning), won't be detected by my computer, or by my other computer, or by my friend's mac...
    I changed the USB wire, ports, updated windows, iTunes...everything that cand be updated.
    Few times i got the message "restore using iTunes" but i can't restore cause i don't see it in iTunes...
    Where i live there's no Apple officil store, is out of the guaranty and i don't know what part to change if i decide to fix it myself.
    Can anyone help?
    Anyone with the same problem?
    Thank you

    Hi Brabus,
    Try following all of the suggestions in these Knowledge Base articles:
    iPod won't turn on
    iPod stops responding or won't wake from sleep
    iPod: No power or frozen
    Any help after trying that?
    -Kylene

  • Nano not recognised on windows or itunes and will not charge, help!!!!

    i went to update my ipod the other day and it said that the ipod was corrupted, so i took it out and pluged it back in again and it worked fine. then i went to charge my ipod on the computer a couple of days later and its not regognised on windows or itunes and will not charge!
    i have reset, restarted and updated etc and nothing has happened. i have read other thru peoples messeges who have simular problems and they say that reinstalling and reseting to factory conditions doesnt work.
    can someone please help me or has any one had the same problem? thanks

    can i put it into disk mode if the computer doesnt recognise it at all?
    Yes, you can.
    "Putting your iPod into disk mode" is simply a process that involves pressing a few buttons on your iPod, getting it into Disk Mode.
    To put your iPod into Disk Mode, follow the steps in this article -> Putting your iPod into Disk Mode
    As Bryan said, see if the iPod is recognized by your computer when it's in disk mode.
    -Kylene
    If any post helps or solves your problem, please click the "Solved" or "Helpful" buttons on top of that post. Thank you for helping the boards!

  • My device won't appear on desktop of DataViz'z Documents to Go. Help?

    Anyone out there solved the "Device won't appear on 'Documents to Go' desktop" I've tried several times and DataViz Support basically sent me their trouble shooting document which I had already gone through and tried but no luck. They have wiped their hands of the issue and said Good luck.
    The problem is that I can't synch Documents to Go (ver. 1.1) on my iPod Touch (1st gen) with OS3.0 with the DTG desktop. My device won't appear on the desktop. I my desktop is a MacBook Pro 17" with latest OSX 5.7
    - I don't get any specific error messages; the device just doesn't show up in the DTG desktop window
    - my internet connection is fine and both apps are on the same WiFi network
    - my Firewall settings are set to "Allow all incoming connections"
    - also tried setting Firewall set to allowing just DTG
    - I successfully installed and ran the iPhone/iTouch app "Remote" (it shows up in iTunes
    This is weird. I've had pretty good luck syncing any and all iPod Touch apps with the Desktop, but not being able to do this one pretty much renders Documents to Go useless.
    Any suggestions?
    Thanks
    Jim

    I solved my own problem. The device was there all along. However on my iPod Touch I noticed I have no user name - - it is just a blank. So it appears in DTG desktop as a blank line which looks invisible to me, i.e. no device. But if I click on the blank line, there it is: a successful link and My DocsToGo.
    I discovered all this by syncing my wife's iPhone, which does have a visible name.
    Now I just have to figure out why my iPod Touch has no user name.
    Thanks
    Jim

  • Please help me open itunes! This is getting ridiculous.

    This is the third time I've posted this... no one has answered so far... and I've been without iTunes for over a week now!!!
    When trying to open iTunes, a dialog box opens up with the caption "*iTunes Setup Assistant*", and header line "*Download Album Artwork*" which tells me how I can go to the iTunes store and get album artwork from there.
    Included in this dialog box are two buttons to choose from: "Next" and "Cancel". I have tried clicking on both of these, to no avail. Nothing happens at all, and I cannot close down the box with the "x" in the top left hand corner either.
    After a short while (and a whirrring noise from my frozen laptop), another smaller dialog box opens up with the caption: "*Upgrade Available*", detailing: "*A new version of the Qloud plug-in for iTunes (3.0.1090) is available. Click OK to upgrade*". I am offered two buttons: "OK" and "Cancel". Nothing happens when I click on either of these buttons, except that annoying "blink" sound that means 'nothing doing'.
    The dialog box appears in front of every window, and cannot be moved out of the way. The only way to close it is to "End Task" through the Windows Task Manager.
    iTunes will not open even after re-booting! Reluctantly, I removed the iTunes and the Quick Time programs from the computer, rebooted, and re-installed iTunes, but the bug is STILL there. I've repeated this, pointlessly, about three or four times. The same thing still happens. It's really upsetting not to be able to open my iTunes library, or update my iPod!
    Please help!

    What version of the Mac operating system is installed on your MacBook? To find this information, go to the Apple menu, select About this Mac and look where it says version.
    iTunes 11.0.1 requires Mac OS X 10.6.8 or later, so if you want to use your iPhone with your MacBook, you will need to update the OS on the MacBook at least that far.
    You can purchase 10.6.8 on disk from Apple for $20 (in the USA.)
    If you want to get a more recent OS, let us know what the specs on your MacBook are, we'll tell you what you can get.
    Best of luck.

  • I dont find music in the itunes. this music get out from itunes

    my music get out from my Macbookpro after atualization to itunes. what's happened?   Now i just see *!* in the many music.
    Anybody Help.

    Connect the iPad to the Mac and launch iTunes.
    Click on the iPad name on the left side under devices.
    Click on the Music Tab on the right.
    Click on all of the albums or playlists that you want to sync - or the entire library if you like.
    Click on the Sync Music Heading.
    Click on Apply in the lower right corner of iTunes
    This might be useful to you.
    iOS: Syncing with iTunes

  • HT1918 billing keeps telling me to contact itune support, not getting any help

    billing keeps telling me to contact itune support, not getting any help

    Hi..
    Use the email form to contact Apple / iTunes support here >  Apple - Support - iTunes Store - Contact Us
    You should receive a reply within 24 hours.

  • Nano won't appear in iTunes or Windows...I've tried everything.

    I've had my iPod for about 4 months.
    It isn't appearing in iTunes or Windows.
    I've tried the 5 R's, none of which worked.
    When I try and use the iPod updater to restore my Nano it just says "Initializing..." and after a few seconds it says "Invalid iPod service version" and shuts down.
    My computer operates really slowly when my iPod is connected.
    When I try to disconnect it, it takes ages...only to tell me that my iPod can not be disconnected.
    So I have no choice but to just pull it out of the USB port.
    When my iPod is connected, it just freezes on the "do not disconnect" screen...which doesn't flash, the screen simply freezes.
    So when I disconnect it, I have to restart the iPod just to use it.
    Please help I've been scouring the support site trying to solve this myself, and sorry for bothering you all with this common question, this is just a last resort as NOTHING I have tried is working.
    Thanks.
    iPod Nano 1GB   Windows XP  
      Windows XP  

    What sites, and what happens when you try to load them?

Maybe you are looking for

  • About classpath!!!

    Gents, I have oracle 816 installed on my laptop. Upon attempting to write a small code in java( thru cmd prompt), I get the "main" java.lang.NoClassDefFoundError: HelloWorldApp OS:NT, Version: J2SDK1.4.1 Can anyone help here how to exactly update the

  • What 100MB Network Cards will Solaris 2.5.1 auto-detect

    I need a PCI network card that Sow-lrais 2.5.1 will recognize. It must be 100baseT. The ones it enumerates at install time are aincient -- SMC/Western Digital, etc. Any modern cards that will work? Please help me move on -- I've wasted days digging f

  • Synchronous Java Proxy Server template - filling reponse message elements

    Hi ! I'm writing a java proxy server for a synchronous interface. I'm somehow new in java...and I don't know how should I create elements for my response message inside the java method used to process the request message. The response message format

  • New iPod and Problems with Podcasts

    I just got a new 30gb iPod yesterday. I noticed when I was playing my podcasts this afternoon, that I couldn't play them all at once. They would play one at a time and then I would have to go back and chose from the podcast category. I have had a 15G

  • REP-50159: Executed successfully but there were some errors when distribt

    Hi, i get this error(REP-50159: Executed successfully but there were some errors when distribute the output) when i distribute output using following url. http://myserver.com:7778/reports/rwservlet?server=rep_myserver_oracleas2+report=D:\Reports\emp.