Nano won't eject: files in use

Every time I try to eject from iTunes I get the message "cannot be ejected as it contains files that are in use by another application". I've tried to uncheck the "enable disk use" box on the summary page but it isn't active. Anybody know where I should go from here? Thanks L

I had similar frustrating issues with a MBP and an iPod Mini. I think the issue was with Spotlight. After unchecking "music" from the Spotlight search results, I've no longer had this issue. You may want to give this a try:
Click on System Preferences and then Spotlight. Uncheck the box next to "music". Try to eject your iPod and see if it works. Doing this prevents you from being able to search for songs from the Spotlight search box, but I'd rather deal with this than continually fight to get my iPod to eject.
FWIW - I used to also try ejecting the iPod using Finder, but this only worked some of the time.

Similar Messages

IPod cannot be updated/restored/ejected--files in use by another app

Since I downloaded iTunes7, I cannot update, restore, or eject my iPod from iTunes. I get the error "<iPod name> cannot be updated(restored, ejected) because it contains files in use by another application." I'm still able to sync music and tv shows with the old iPod software, but not movies. I eject it using the Safely Remove Hardware icon in my system tray, or from My Computer. I've tried disabling security programs and peripherals, and even sifting through the processes in Task Manager. I had no trouble ejecting prior to iTunes 7/7.0.1.
And yes, I've done the R's I'm able to do (Restore is not an option due to the nature of the error).

Hi again, Corey!
In regard to "recovery mode" message, you'll most likely just need to restore your iPod. For more details, read here -> Restoring your iPod
If this message persists after restoring your iPod, try assigning your iPod a different drive letter; see these steps below:
Log off of any other users on your computer.
1 - Don’t plug in your iPod yet.
2 - Go to "START -> Control Panel -> Admin Tools (if you don't see this, click on "classic view" button on the left panel) -> Computer Management."
3 - Click on the "Disk Management" button in the left panel area.
4 - Now, with "Computer Management" and Control Panel windows opened, reset your iPod, and connect it.
5 - Right-click on your iPod's listing there (after a few moments when it gets recognized in this drive window), and click on "Change Drive letter and Paths". Then the "Change..." button.
Here's what it should look like:
Assign your iPod the letter "M" "N", "O" or the like (further along in the alphabet).
For more details, see this article:
Windows confuses iPod with network device / Changing drive letter
I hope this helps you!
-Kylene
If any post helps or solves your issue, please mark it that way accordingly. Thank you for helping the boards!

30 gig IPod Unable to eject files in use ?????

Hello everyone
I recently upgraded to itunes 7 and began having this problem...
my Ipod connects and syncs alright but after its done it goes in to a continuous loops of saying do not disconnect when I try to eject it mannally it says unable disconnect files in use by another application ....
It always worked fine before ?
I have rebooted my computer and reset and restored the ipod but to no avail..
Thanks for any help you can give
fb

Set the preferences in all your antivirus/antispyware software to NOT scan iPods.
If you are manually managing your music or have disk access activated you will have to set your software to not scan external storage devices

IPod Nano won't eject

Ok so I'm new and I'm trying to get a playlist onto my new iPod. However, every time I go to the File menu and select iPod update, afterwards it becomes impossible to eject the iPod nano, and I can't even shutdown my computer. Well I get impatient after waiting a few minutes for the computer to shutdown when it usually shuts down in less then a minute. I get some sort of message that some program is still using it this is even after I quit iTunes and restart it again to see if that would help.
For reference we have XP and are running service pak 2. So that should be compatible.
Thanks,
Light Jen
iPod nano Windows XP
iPod nano Windows XP

if u havent yet, try right-clicking the connection of ur ipod to ur computer icon, and then clicking safely remove hardware. i think thats what it says, its safely remove something. then after that u can unplug ur ipod. hope this helps.

I can't eject ("files in use by another application") Windows/Vista Issue?

OK... so in the grand scheme of things, this really is NOT the end of the world... but it sure is super-annoying!! This is my first every Apple product (took a while to get on the bandwagon) and I was hoping for more stability and ease of use... I've called AppleCare several times and they can't help me figure this out... according to them it's a Windows/Vista issue (which DOES seem likely). I'm running Windows Vista Home Premium on a Dell Dimension E521.
Here's how it goes... I plug my iPod in, which opens up iTunes and it syncs fine. I wait until the top of iTunes says "sync complete" and the face of the iPod simply says "Connected". Then I click on the "eject" button next to the iPod listing in iTunes. It pauses for a moment, then I look down and the iPod suddenly has those syncing, circular arrows, moving again and it says "Synchronizing- do not disconnect". And then a few moments later, iTunes gives me a pop-up that says " XXXX ipod cannot be ejected because it contains files that are in use by another application"
So obviously, something else is connecting to the iPod and preventing me from ejecting it using iTunes, but I have not been able to figure out what it is!
Since it's something on my machine, I have tried the following:
- shut down AntiVirus (TrendMicro Internet Security 2008)
- turned off Windows Firewall
- went through all the programs running in the task bar and turned them off
- opened up Task Manager and turned EVERYTHING else I could see off
None of the above have made any difference. The workaround that Apple gave me was to go into Computer and then right click on the listed drive and select "Safely Remove" which usually works (the times it doesn't work, it gives a similar message saying the device was being used by another application and can't be removed, try again later). But 90% of the time it works.
I use that or the Eject option when I right click on that drive (not sure the difference, they seem to do the same thing). The workaround works, but I'd sure LOVE to get iTunes to be able to eject my iPod!!
Here's what I've done regarding this iPod and iTunes:
- reset the iPod
- restored the iPod
- uninstalled and re-installed iTunes
- selected and unselected the various things I'm syncing (currently: Music, TV Shows, Podcasts, Photos) to see if it was one of them causing the issue
NONE of the above has made any difference (and I've done each about 2-3 times, ZERO exaggeration).
I've called into AppleCare about half a dozen times now, hoping to get that one brilliant tech that knows more than the others... but no luck yet... so I thought I'd try this forum to see if one of the brilliant posters here can help me sort this out.
PLEASE- ANY help you can provide (or even just point me in the "right" direction of how to determine this) would be GREATLY appreciated!!
Thanks so much in advance,
SC

I am using windows Vista and having this problem also (not exactly, but iTunes gives pop-up that "files are in use"). Acting a suggestion from another answer in this thread, I clicked on Computer and selected eject...windows did warn me that the device was in use, but also gave me a CONTINUE button, which I clicked and it was ejected...had to go back to iTunes and eject the iPod there also, but it did eject

Why won't my files delete?

Lightroom will not delete files from hard drive. I "grab" the file(s) in Lightroom and hit delete on my keyboard. The message comes up: "Delete the selected master photo from disk, or just remove it from Lightroom?" I always click "from disk." The files are deleted from the Lightroom Catalog but are not deleted from the disk. I have version 5.2. However, I have had all previous versions. The problem has remained the same with all versions. I am using Apple Mac Pro Maverick 10.9. But I have had each version as they come to market. To state again: Why won't my files delete using the above method?

Does it come up with an error message, or just doesn't delete them?
Where are the files stored? Have you checked you have full read/write permissions?

I have a Seagate Slim Portable 500 GB USB 3.0 external hard drive that worked great with my Macbook Pro 13" Retina but gets ejected and won't show files on any iMac.

I have a Seagate Slim Portable 500 GB USB 3.0 external hard drive that worked great with my Macbook Pro 13" Retina but gets ejected and won't show files on any iMac. My Macbook Pro and the two different iMacs I tried it on were all using Mountain Lion, so the only difference was the iMac versus Macbook Pro.

I just tried this, no luck...
I connected a different USB cable, still the same problem. Tried both cables with the problematic hard drive on two different computers, still the same problem.
At this point I assume I'll probably need professional help in saving the files, thanks for the assistance.

IPod nano won't sync; dreaded "duplicate file" message

Suddenly, my old but heretofore functioning iPod Nano won't sync radio podcasts. Gets the "duplicate file" message. I have tried resetting multiple times; reinstalled iTunes, changed the port, checked for plug-ins (no iToner) etc. Ran diagnostic; it fails the device sync test, saying no iPod touch found.
I have seen some other complaints about this.
Is there a solution? I have done most of the troubleshooting steps but did not restore iPod to virginity (hoping to avoid reloading songs onto it).
Thanks in advance for any help.

If you've read the Technical Specification you will find that the nano can only use Firewire for charging, not for syncing:
http://www.apple.com/ipodnano/specs.html
"Charging via USB or FireWire to computer system or power adapter (sold separately)"
So you can rule that out.
Have you tried the 5 R's?
http://www.apple.com/support/

Ipod nano will not disconnect, another app using a file

when i try to eject my nano, it says another application is using a file. what do i do, or where is this file,

Daggum, b. That's my idea, too.
Also possible is that we are using something like the google desktop thingie or somesuch that indexes the drive for list as you type searching (you know, in a clumsy attempt to imitate spotlight in OS X Tiger). If that is the case, then the drive will not be removeable until the index app is closed out.
Do we have something like that running?

Hey. I've got a 3rd gen nano that I've just bought, used. When I plug it into mt PC, (win7) and open I tunes, I can't sync my library and under 'devices' in the 'file' colume it acknowledges this ipod but only to transfer purchaces. sync not available

I've got a 3rd gen ipod nano that i've just bought 'used'. When i plug it in to my PC, (win7) I can't sync my i tunes library and under 'devices' in the 'file' column it acknowledges this ipod, but sync and backup are not available. Only have 'transfer purchaces from....' which does nothing for me. any help would be greatly appreciated

Sorted it out. If anyone has this problem i reccommend visiting http://forums.ilounge.com/ipod-classic-ipod-5g-video/237546-ipod-classic-80gb-fr eezes-itunes-need-restore-plz-help-2.html#post1403546 there's some pretty good advice on it. have to go into control panel and re-format iPod into NTFS file. good luck.

PSCS6 no longer recognizes my CR2 files and will not open. Using Canon 5DMark III with updated Camera Raw . It has worked before but now won't open files from this camera.

I have been able to open files from this camera before but still checked for latest Camera Raw download. Still won't open files from this camera. Opens files from my 60D just fine. I downloaded the latest and it has worked before. What the heck is going on?

Glad to be of help. But I'm curious (not critical of what you are doing) to know why so many people like to use Nikon Transfer to transfer their files to the computer. It is still necessary to import them into Lightroom. And, from my perspective, it seems simpler and maybe even a little quicker to use the Lightroom import dialog. I have Nikon cameras, and have never even installed the Nikon Transfer utility. What is so unique about it?

Adobe X PDF files converted to jpg, edited and converted back to PDF have ragged, unclear text. I didn't have this problem with Acrobat 9 standard. What is the remedy for this. If this is the best I can expect, I won't be able to use X standard.

Adobe X PDF files converted to jpg, edited and converted back to PDF have ragged, unclear text. I didn't have this problem with Acrobat 9 standard. What is the remedy for this. If this is the best I can expect, I won't be able to use X standard.

I can't imagine any worse workflow than converting to JPEG to edit text, then back to PDF. Text in a PDF is a vector thing, smooth at all resolutions. And JPEG is made for photos. EVERY conversion to JPEG and back loses quality but how much loss there is will vary.
If you must go to an image format, try PNG.

I have used Image Capture to scan images/documents and then saved them as either PDFs or PNG files. For some reason, just this past week Image Capture will no longer save the file. It scans, and the Scan Results window pops up, but it won't save file.

I have used Image Capture to scan images/documents and then saved them as either PDFs or PNG files. For some reason, just this past week, Image Capture will no longer save the file. It scans, and the Scan Results window pops up, but it won't save file.
The file name has no special character in it, just letters and no spaces.
I have done this in the past and it has worked, but now it will not.
I have not upgraded any software, that I am aware of.
After scanning, the Image Capture pops up the Scan Results with the file name in the window, but neither the Scan Results nor the Image Capture window responds to inputs. The Image Capture window is frozen, with only the "Overview" and "Cancel" buttons active (but non-responsive).
Is this a software issue or a scanner hardware issue? I am using a HP Photosmart C6200 series printer/scanner on a network using a Time Capsule airport.
Thanks.

I had the same problem.
Got a 90% fix. Apparently the Mavericks preferences won't work with Yosemite, so I just deleted the Image Capture preferences.
Unfortunately, the "Scan to" folder seems to be permanently set to the Pictures folder.
1. Quit Image Capture
2. Go to Finder > Go > Home, which opens up your home folder (named after your user name)
3. Open Library > Preferences > com.apple.ImageCapture.plist - Drag this file to the Trash
4. Start "Image Capture", click "Details" and change all your settings as you prefer
5. Quit and restart "Image Capture". Notice it remembers all your settings except "Scan to" folder. It insists on saving to "Pictures".
That's as far as I was successful. I tried changing the "Scan to" folder to "Desktop", but on launch, Image Capture always sets it back to "Pictures".
This is what I tried:
6. Download and install "Pref Setter" from http://www.nightproductions.net/prefsetter.html
7. Quit "Image Capture". Right-click on "com.apple.ImageCapture.plist" and open with Pref Setter.
8. Search for "Pictures", which finds "~/Pictures" (the tilde character at the start means your home directory).
9. Double-click on "~/Pictures" and change it to the folder you prefer. I like "~/Desktop"
10. Choose File > Save then Quit from Pref Setter. Note that re-opening the plist file still shows "~/Desktop"
11. Start up "Image Capture" -- on startup, "Image Capture" sets "Scan to" folder to "Pictures"
I consider this a bug.

Reader XI won't open..."file in use"

Reader XI won't open..."file in use" Help

What is your operating system? What is your Reader version? Does the message indicate what file is "in use"?

Why won't FireFox open local .html files (when using "open file")?

I teach hand coding and use FireFox to grade my students work. I also tell them to use this browser to review their own work. If they cannot navigate to their files on their desktop I will have to switch to another browser. I know it is something from the latest version... as I have been using FireFox for the last 5 years as my classroom browser of choice.

Firefox should still be able to open files using open files.
I use Windows so things may differ slightly but the option to open files is available but not visible by default, I can get the option to browse for files using: keyboard keys'''Alt , F , O'''
My directory structure and path may differ slightly but I am also able to key directly into the location bar something such as '''''file:///C:/'''''
A third option would be simply to click on the relevant HTML file and use the option to open, or open with Firefox. Such files may also be bookmarked.

Nano won't eject: files in use

Similar Messages

Maybe you are looking for