Nano won't play in bose when fully charged

Whenever I put my i-pod (third generation) into the bose speaker system, it won't play once it reaches a full charge. It's as if it refuses to play once the battery is full. The song stops and the screen displaying the full battery pops up and I have to keep hitting play every 10 seconds. Has this happened to anyone else?? Help!

Add me to the list of "same problem" I had my 3G Nano for less than a day - docking with JBL Onstage II - and don't recall the problem happening once before the 1.0.2 firmware upgrade. Now it happens somewhat randomly, but with a mean of once every hour our so. To repeat: Nano 3G plays normally with screen dimmed, then "battery charged" screen lights up and playback stops until I hit play again. Does this happen with dock products (i.e. do any of you have non-JBL dock with the same problem)? Jerryii_:) does your car have a JBL / Harmon Kardon docking adapter? If it's just the JBL dock I have 30 days for a no-questions asked exchange or refund.

Similar Messages

My ipod nano 7th generation won't play anything and when i click "radio" it says to plug in headphones when they're in. Can anyone help me with this problem?

my ipod nano 7th generation won't play anything and when i click "radio" it says to plug in headphones when they're in. Can anyone help me with this problem?

Get a flashlight and make sure there is no obstruction/dirt/debris in the Nano headphone jack. Be sure you plug the headphones all the way in, the plastic on the headset jack should be flush with the body of the Nano.

MacBook Pro power adapter doesn't show green light when fully charged

I've had a quick search through the communities and there are a lot of posts about chargers and indicator lights, but I'm not sure I'm really satisfied about my own issue so I thought I'd ask anyway.
Basically, I bought a spare power adapter (genuine Apple 85W MagSafe2) for my new 15" Retina MacBook Pro in a store the other day, to save me lugging my main adapter to and from work all the time.
Using it for the first time made me realise that the adapter I got with my MBP behaves slightly differently re: the LED indicators. The new one from the store shows amber until the MBP is fully charged, then solid green once fully charged. This I believe is perfectly normal.
The charger I got with the MBP shows amber whilst charging, but only shows green very briefly when fully charged and then the indicator goes out completely. OSX (10.8.2) still indicates that it is connected to the power source though, and the battery doesn't drain or anything at this point - it definitely appears to be functioning as expected.
Aside from this, I can determine no real difference between the two adapters in terms of charging speed or general functionality, they both appear fine.
I just wondered if anyone else had ever seen this?
I did reset the MBP's SMC settings too, but it made no difference. I'm inclined to think there isn't an issue with the laptop itself since the new adapter's indicators work exactly as I'd expect, but then again the original adapter seems to function perfectly so I'm wondering if there's just some trivial issue with the green LEDs or something like that.

Really doesn't matter if anyone else has or has not seen something like what you have. Your original adapter is faulty in one way or another and you should take it in to Apple with your rMBP to show them what is happening and Ask Nicely for a new one that works correctly.

Does keeping a macbook pro plugged in even when fully charged damage the battery in any way?

Does keeping a macbook pro plugged in even when fully charged damage the battery?

no it will not, your battery stops charging when it reaches 100%. you can verify this if you'd like to through system report - power.
once in a while however, it's best to use it under it's own power and charge it back up once it's down to 75% to keep the battery in optimal condition.

Does it adversely effect the battery to keep the IPad plugged in when fully charged?

Does it adversely effect the battery to keep the IPad plugged in when fully charged?

Copied from Texas Mac Man ...
The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
 Cheers, Tom

My ipod keeps shutting off randomly even when fully charged

The past few weeks my ipod will not stay on even when fully charged. i already restored it and put the setting back to the original settings and it hasnt helped. any other suggestions?

Hi yanksfancvh,
Thanks for visiting Apple Support Communities.
If your iPod is not staying powered on and you have already restored it to factory settings, it likely needs to be serviced. The following link should help you get started with the process and has links with additional information on topics such as warranty and service pricing, battery replacement, and express replacement service.
http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipod
Best,
Jeremy

My iphone wont respond when fully charged and kept on mains charge is this right?

My iphone screen wont respond when fully charged and kept on mains charge is this the norm?

No that isn't normal.

My iPod nano has stopped working. It is fully charged. I have tried to reboot and restore, and it still isn't working.

my iPod nano has stopped working. It is fully charged. I have tried to reboot and restore, and it still isn't working.

What do you mean it is not working? Does it power on? Is it recognized in iTunes? Need a bit more detail in order to assist you here.
B-rock

Nano won't play in the dock when battery is full...what's up with that?

I have an iPod sound dock, it plays my new iPod nano fine, but when it charges the battery completely...even while it is playing a song, the screen will change to the "Charge Complete" screen and the music will stop. So I can only play music when the battery is drained. What's wrong?

Add me to the list of "same problem" I had my 3G Nano for less than a day - docking with JBL Onstage II - and don't recall the problem happening once before the 1.0.2 firmware upgrade. Now it happens somewhat randomly, but with a mean of once every hour our so. To repeat: Nano 3G plays normally with screen dimmed, then "battery charged" screen lights up and playback stops until I hit play again. Does this happen with dock products (i.e. do any of you have non-JBL dock with the same problem)? Jerryii_:) does your car have a JBL / Harmon Kardon docking adapter? If it's just the JBL dock I have 30 days for a no-questions asked exchange or refund.

Nano suddenly not playing on Bose Sound Dock

I tried to play my Nano on my Bose Sound Dock today and it suddenly won't play. It has worked fine up until today. When I set it up, it would say that it wouldn't charge, which I understand, but it would always play. Now, there is no sound whatsoever. Any ideas?

I had this problem a lot and found that sometimes it works and sometimes it doesnt, but here is what I did just plugged the dock in and then it worked. maybe to do with battery.
Thanks
andy
< Edited by Host >

Ipod Nano won't play any songs downloaded from MySpace pages...

My first generation Nano was initially sent back to Apple due to the battery losing it's charge to quickly. They sent me back what appears to be a replacement Nano and now this one won't play any songs downloaded from MySpace pages of bands, shared from friends (unprotected mp3 files) or otherwise downloaded from the internet.
Whats unusual is that any songs imported from a CD to the Nano play fine as do any songs purchased from iTunes. I know Apple has stated that any files the user wishes to play on their iPods will play as long as the format is compatible. (All of these songs in question played on the original Nano and the problems started when they said they fixed it and sent it back (although it is missing the engraving which to me indicates they gave me a refurbished Nano). My Applecare runs out in mid-October so I need to figure out what is wrong. I sent it back a second time and they told me they couldn't recreate the problem so they just updated the software and sent it back.
Someone suggested that some iPods have a part of the firmware activated (which Apple may have been testing) that prevents any non-ITunes store music or music no t off an original CD to fail to play.
When attempting to play downloaded songs from sites like Purevolume and MySpace the iPod plays for a few seconds then shuts down and restarts itself, all of these songs worked fine before Apple took it in for service.
Any suggestions?

Hello,
I have exactly the same problem. It`s so annoying.
I did a little bit research on this discussion board and this problem seems to be known for quite a long time. It`s confusing me Apple is not able to fix that prob or give customers quick introduction to resolve the prob.
I am currently on vacation in Florida and just bought the new iPod 30 Gig. I transfered already songs from my music cd. That worked fine.
I bought 2 music video files, synced them with no error to the iPod, but it only shows me a black screen when I want to start the video on the iPod itself. itunes plays the files with no problem.
Any ideas how to fix it??
DELL Latitude D800 Windows XP Pro

IPod Nano Won't Play Songs...Stays on Menu

Hi! My husband's 2GB iPod Nano will not play any songs. It will charge and it will show the menu with Music, Photos, Extras, Settings and Shuffle Songs...yet it won't let you click on any of these. I have tried resetting it by holding the Menu and Center Buttons, and it will show the Apple logo and then go back to the menu it was on before. Any suggestions on what I can do now???
Any help is appreciated! Thanks in advance!

You may have a hardware issue and need to have it serviced, but before going that route, try this. Connect your iPod and in Device Manager or My Computer, right click on your iPod, then select disk management. Format the iPod (FAT32) and while you are there, assign it a different drive letter, try M or P or Z. Now Restore it in iTunes, fully charge it, resync it, and try again.
Is this iPod in warranty?

Please HELP! iPod Nano won't play songs

I just got my iPod nano yesterday and absolutely loved it. I took some of my friendssongs from his PC. Then I tryed using ipod agent to put them into itunes. It said that there was an error. Now when I chose a song the song will come up, it won't play, but instead go to the next song and same thing happens. Now itunes won't even recongiz or pop up when it is plugged in

The iPod is designed to sync to one computer as it copies the music to a special file for the iPod OS and software to play.
You can enable "disk mode" and use that to transfer any file back and forth, but the iPod won't play music files stored in the "disk mode" portion you set in iTunes Preferences with the ipod plugged in.
Basically the software you used to transfer the music out of the "special file" back into iTunes is not authorized, it's a "hack". So Apple routinely disables the hacks because of agreements to protect the music from piracy.
Another thing is the music you got from your friend may indeed by ACC/"Fairplay" copy protected music bought from the iTunes Music Store, unless your computer is one of the five authorized, it won't play.
Also because you hooked your iPod to your friends PC, the "ownership" might have changed and Apple may have employed something that your iPod is no longer recognized as yours.
What you probably have to do is use the iPod software to "reset" your iPod, clear out everything in the process and just hook it to your computer.
If you want to transfer uncopy protected, non-copy righted "free" music to your computer from another computer, enable the iPod's "disk mode" and set a size to balance between the music in your "special file" and the needs of what you intend to transfer.
Once you get home, transfer the music files into your iTunes, then you can copy them to the "special file" so the iPod can play them.
It's a bit complicated, but's it's designed to prevent mass theft of music (so the artists will provide their music online) and keep the benefit of syncing/playlists in line.

Nano won't play new songs

I can only play songs from my current Nano playlist. I can't move songs I purchased last night (to my one Mac) or any other songs from my iTunes playlist, they show in my ipod playlist but they won't play. When I plug the iPod into my Mac I see the songs in iTunes on the iPod playlist and I can play them through my computer.
I changed USB Ports and reset my iPod

Can you play the recently purchases songs on the Computer?
Have you tried the five Rs?
http://www.apple.com/support/ipod/five_rs/

My iPhone 4's ringer or alerts, texts emails videos on YouTube or iPod won't play sounds however when I get a call the sound is loud an clear. I know it's not a problem with the speakers. It once said that it was connected to a tv when connected to dock.

Recently my iPhone 4's sounds are going haywire. I have a Jensen radio iPod dock that I hooked it up to earlier on in the week(first time too) and when it played a song, my iPhone said that this video was being played on a television. Since then the ringer(at times) along with my texts, you tube videos and iPod on my iPhone won't play music through the speakers. However sometimes my ringer comes through. Same as alarms. When I try to adjust the volume settings it doesn't do anything. My speakers work fine. It's just getting it to recognize its not being played on a tv anymore that is annoying.
Does anyone have any clue what to do?
Thanks

DaVBMan, thanks for that post. That clears up something for me. I think I have experienced that funny noise as well. It sounds like a Morse Code message. I have heard that same noise while at Church on it's PA speaker system. When I heard this, I figured the speakers were picking some radio frequency noise, but I couldn't understand what exactly it was. When I purchased my iPhone, I already had an old cable, stereo jack on one end and RCA plugs on the other. I noticed the same noise on my speakers. So, I am figuring if I replace the cable, I should be fine.

Nano won't play in bose when fully charged

Similar Messages

Maybe you are looking for