Nano won't resume tune when turned on again - jumps to next one.

I was under the impression that, if I turned my nano off in the middle of a tune, it would resume playing that tune when switched on again and play is pressed. Mine waits for about 2 seconds and then jumps to the start of the next tune, every time. I am now on my second nano (having got the first one replaced because of this problem) and this one does exactly the same. It only happens if it is off for at least 10 minutes so it is difficult to demonstrate instore (it does resume if turned back on sooner).
I have tried the 5Rs several times and this has made no difference.
Am I expecting too much or is there something wrong here?
Dell Windows ME

Hard Reset – While printer is powered ON, pull the power cord from the printer then from the wall. After 30 seconds reconnect power to wall and printer. This will trigger a ‘dirty power up’ and restore the printer to a known good condition (if it is possible). No user settings are lost with a ‘hard reset’. This ‘Hard Reset’ is one of the most powerful tools to use when the printer hardware is not functioning properly! IF NOT RESOLVED, uninstall hp software & reinstall using latest hp software from hp website.
Although I am working on behalf of HP, I am speaking for myself and not for HP.
Love Kudos! If you feel my post has helped you please click the White Kudos! Star just below my name : )
If you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly : )
Happy Troubleshooting : )

Similar Messages

My Apple TV won't start. When turned on it shows an Apple TV box with a cord leading to but not connected to an iTunes icon

MMy Apple TV won't start. When turned on it shows an apple TV box with a cord leading to an iTunes icon. I have tried unplugging still get the same message. Our electricity was off a few days ago. Could the HDMI cord be bad?

It's not the HDMI cable.
If you had a power surge, your Apple TV probably just needs to be restored. That logo means you need to plug it into a computer with iTunes installed to restore the device to factory settings. You'll need a micro-USB cable to do so. Plug the usb into the apple tv in the micro-USB slot, then into the computer with iTunes already opened. A screen will appear in iTunes with a button to restore the device.
If you don't have the appropriate cable on hand you can make an appointment at an Apple Store and they'll restore it for you. Just go to locate.apple.com to find the closest location and make an appointment. Keep in mind if you can't or don't go to an Apple Store a private repair place may charge for this service.

IPod nano g6 keeps flashing on when turned off and it lo

Whenever I wear it (It's a watch i ordered the iwatch strap) and turn it off (I'm not playing music), it flashes on after 30 secs and it keeps doing it over and over. Then when i checked it after 2 hrs (or was it 1?), and it was completely shut off. Please help? (it won't flash on when i put earphones on and music plays, but i just want to wear it around (without playing songs) casually without it running out of battery quick.

This only happens "Whenever I wear it"? So, if it's sitting on the table, it does not happen?
If movement is causing the problem, maybe it's the Shake to Shuffle feature misbehaving. Try turning it OFF in Settings - Music to see if it makes a difference.
Do you have any headphones with remote control buttons on the cord connected when this happens? If so, if you connect a different set of headphones (any type), does it still happen?

Nano plays 30 seconds of a song then goes to the next one

My ipod nano plays about 30 seconds of a song then goes to the next one. It is very frustrating. Any answers?

Does this happen with every track you try to play or only certain ones? Does it happen to these same tracks in iTunes?
Make sure the Shake to Shuffle feature has not been turned on it Settings -> Music.
B-rock

Ipod nano won't start itunes when connected

When I plug in my new Nano (9th generation) it won't start up Itunes. Once I open Itunes it snycs my nano then disconnects the nano. I can't choose or organize any items on the nano as they are "greyed out" and not accessible.
ANy ideas?

Hello khan69,
I'd recommend manually putting the iPod into Disk Mode, then restoring the iPod via iTunes.
Restore iPod from Disk Mode
Disconnect iPod from your computer.
Manually put iPod into Disk Mode.
Open the latest version of iTunes and connect iPod.
Restore iPod.
iPod Displays a Red "X" Icon
http://support.apple.com/kb/TS1463
Cheers,
Allen

2013 13" Retina Macbook Pro won't resume properly when connected to external display

Have a lovely new 13" Retina macbook,
When it's connected to my display by a displayport->hdmi adapter and the lid is shut if the laptop sleeps then it will not resume properly. I get a black screen, or a blue screen with a cursor, and I have to reset the macbook to use it again.
Without the display connected it works fine every time ( by lifting the lid ).
Any Ideas?

Had a chat with apple support, and this got fixed
Solution was a SMC controller reset
http://support.apple.com/kb/HT3964
and a PRAM reset
http://support.apple.com/kb/HT1379
Cheers to the top bloke at apple support!

Nano hangs on apple icon when turning on. After several restarts, still will not go past Apple icon. Computer doesn't recognize Nano when plugged in.

I tried to connect iPod Nano this morning to sync Podcasts. Keep getting error that device not found.
Restarted Nano and the screen hangs on the Apple icon & doesn't progress.
I restarted one time and looks like I got into a diagnostics program.
Tried to restart while plugged into computer, still doesn't go past Apple icon.
Any idea on how to get Nano to come up fully and connect to computer via iTunes?

Restore the phone from Recovery Mode as described here: http://support.apple.com/kb/HT1808

BB off for a few days -- When turn on reconciled emails all show one date/time.

If I am away for a few days -- with the Blackberry off -- Then when I return and turn on the unit, it will reconcile email through my work blackberry server. The emails that get downloaded at that time all show on my blackberry email listing as received at one time -- when the reconciliation occurred -- not the dates/times that the actual emails were written. My work email (on my computer at work) will show the dates/times that the actual emails were written -- even though I also had been logged out from my work email for the time I was away. This is a real pain for viewing / looking through and finding emails later on the device. So now, I have to leave the unit on and plugged into the wall when away -- so my emails will show the right date/time on the device. Is there a way to set things up so I don't have to resort to this? -- seems to me that there must be -- otherwise a lot more people would raise this concern.
Thanks,

The last time I checked the incoming emails will always go by the date/time on the device itself. There is not a way to change this behavior.
Do you turn it off to conserve battery power? If so you can always place the device in Standby mode. The battery drains much slower in this mode and should last anywhere from 10-15 days.
If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
Remember to resolve your thread by clicking Accepted Solution.

HT1435 my 3rd generation iPod nano won't charge

My 3rd generation iPod nano won't charge and when i connect it, it shows up charging then the screen goes black and wont work. Can i get it replaced for a new one? or a different one? What can i do?

Try these steps listed below.
1. Run “c:\WINDOWS\system32\devmgmt.msc” (i.e. *Device Manager*), and leave it open for now for later use
2. Start up iTunes
3. Next, connect your iPod.
4. Go to your iPod Settings and select the “Enable disk use” option from under theSummary tab.
5. A dialog box will pop up reminding you that you’ll need to manually eject. Go ahead and hit OK
6. Hit Apply to save changes to the iPod
7. Quickly switch to the Device Manager window and right-click on any item within the window and select “Scan for hardware changes”
8. Finally, switch back to iTunes, and try re-syncing your iPod to see if it helped.
It might not also hurt to trash your iPod's Photo cache if it has one (i.e. you sync photos to the iPod). See this article for information on where to find this folder on your Windows XP machine.
http://support.apple.com/kb/TS1314
B-rock

My ipod nano won't turn on!

My ipod nano won't turn on. I have tried restarting and resetting it. I have tried plugging it into two different computers and both times it just kept blinking the apple logo. It's not on hold. My warranty is expired. Do I need to get it repaired or replaced, or is there something I can do?

my ipod nano won't trun off either sometimes.. when that happens i have to hit play and have it play a song for a couple of seconds and then do the thing to turn it off andfthen it turns off.

Help! Ipod nano won't turn on after disconnecting!

Okay I've had my Ipod nano for like 3 weeks. I've used it once. It worked fine when I first got it and after my battery ran out I haven't used it for about a week. When I got it back I hooked it up to my computer and updated the stuff on it as well as let it charge. After is says to safely disconnect, I disconnect it but it automatically turns off and won't turn back on. I've tried resetting it and nothing works. I thought the battery was dead but I've left it plugged in (not only USB on my computer but also tried an outlet) and it never completely charged. I've even left it plugged in overnight (well over the 4 hours it's supposed to charge). I have no idea what to do (It also took like at least a full day to completely charge the first time I've had it)

Tuesday, December 02, 2008 7:23:56 PM
Okay my iPod wouldn't turn on . (Guess I will be throwing out the box to ship my ipod for warranty replacement)
at like 11pm dec 1 2008, the ipod was dead, pressing the power button did nothing.
I thought it was a goner... I even ordered a warranty replacement..
ipod wouldnt turn on . left it for 24 hours. when I got home from school the next day
it tried to sync but my playlist did not exist..it even showed the folder in windows
After trying various USB ports and seeing an Apple Icon, and "connect to power low battery"
I even requested a warranty replacement... and apparently you throw out the box they send to cancel. I wish I could be courteous and let them know
So in short
PROBLEM;
==IPOD Won't Power on when you press the power button==
(FIRST OF ALL , I STRONGLY URGE YOU TO NOT TRY TO OPEN THE IPOD UP,
you will probably scratch or damage the beautiful iPod .. when it will be perfectly fine 24 hours later...)
Try:
RESET, and plug in to itunes and restore..
SOLUTION:
http://www.everymac.com/systems/apple/consumerelectronics/ipodfaq/ipod-troubleshooting-wont-turn-on-appear-hung-sad.html
Official Apple Documentation:
http://support.apple.com/kb/TS1383?viewlocale=en_US
I guess my actual story will make you believe that THIS SOLUTION actually works.
"Let the iPod battery drain
In rare cases, iPod might get into a state in which it needs to be drained completely before it can be reset. If iPod didn't turn on after you reset it, follow these steps:
1. Disconnect iPod from all power sources and leave it disconnected for about 24 hours.
2. Reconnect iPod to the Apple iPod Power Adapter or computer and reset it.
I even tried the iPod on 2 computers and it was sort of detecting the serial # in Windows
but mostly freezing up windows.
4. " Let iPod's battery drain"
Was the solution for my iPod 3rd generation.
So now that the problem was fixed, I guess iPod is so terrible after all
Just don't drop your iPod get it a nice case
it took from 9pm December 2,2008 to about Dcember 2,2008 6:45pm
roughly 20 hours.. so this morning when I left I pressed the button and it wouldn't turn on
I thought maybe the battery was knocked loose but the battery was just so low or something
To prevent this problem I guess whenever you ipod is low battery, charge it before it gets dangerously low
As sad as it is to wait like 24 hours without your iPod just to pray that the problem is the battery or something and then it will power on..
When it actually does power on you would see the apple Icon
== When it was all said and done==
I didn't really need to use "restore" option, i think itunes resynced what it needed.
And thanks to this I upgraded to Itunes 8 .. which I was too lazy to do before
==STILL DOESNT WORK?==
If you bought it less than a year ago... Warranty..
https://selfsolve.apple.com/GetWarranty.do
Enter your Serial# and country and it will be located at the back of your iPod under where it says 8GB or whatever (at least for iPod Nano 3rd generation)
I always like posting solutions, so that someone like me can benefit from it.
It is my understanding that if you do send in your iPod they don't care about the USB cord or headphones that came with it, so you just ship the iPod itself
see here for some frequently asked questions.
http://www.apple.com/support/ipod/service/faq/

My IPhone 5 won't allow me to turn on my bluetooth, when I try to turn it on it automatically goes back to the off position.

My IPhone 5 won't allow me to turn on my bluetooth, when I try to turn bluetooth to the on position, it automatically goes back to the off position. I can't connect bluetooth with anything?

Restart your phone, hold the home and off button at the same time until the apple symbol comes up.

IPod nano won't turn on or be recognized in iTunes or Vista

We recently upgraded to Windows Vista, so I downloaded iTunes 7.2, then plugged in my ipod which was working fine, then it said it had to be updated, but first I needed to update something in windows vista. So I updated Vista and also looked in the help section for ipod and read this:
Microsoft has released an update for Windows Vista that addresses a situation where ejecting iPod from Windows Explorer or by using the "Safely Remove Hardware" feature in Windows Vista could corrupt your iPod. Apple recommends Windows Vista customers who own an iPod install this software update. For information on how to install this Microsoft hot fix, refer to the "Update your software" section below. Tip: iPod can always be ejected safely by choosing Eject iPod from the Controls menu within iTunes.
So, I thought that my ipod would get ruined so I did the "eject ipod" from the control menu in itunes, and after that my ipod never turned on again. What happened, did I do something wrong?
I did the 5 R's already and it does not turn on. It is not even in my computer (device manager) and its not even being recognized in itunes. It just disappeared and it won't turn on. Please help!!!
Thanks in advance.
Dell Windows Vista

I'm having a similar problem with my Ipod (40GB, now discontinued) here's my problem:
My hard drive would spin up and then down and then up and then it would turn off. Also I would turn it on and flip to a song, it would be OK and then if I went to flip to another one the screen would freeze on me for a few seconds, then it would work then continue doing that until I got it to turn off. It did that for a few days and then the other day I turned it on and it wouldn't take me to my music screen and it came up with an Ipod that was dead and a link under it. It did this for a while and now I can't get it to work either, I turn it on now and it comes up with a folder and the apple support website and when I tired restarting it, the screen would come up with a check mark and say "Disk Mode" at the top and "OK to disconnect" below the check mark, and now Itunes doesn't recognize it and the hard drive spins and it goes on acting like iTunes sees it when in truth it doesn't.
Hope someone can help!
Erin

My ipod nano 4th generation only works when it is plugged into the computer; otherwise, the screen turns black and it is completely unresponsive to any efforts such as pushing buttons, reseting, etc. What should I do?

My ipod nano 4th generation only works when it is plugged into the computer; otherwise, the screen turns black and it is completely unresponsive to any efforts such as pushing buttons, reseting, etc. What should I do?

Sounds like the battery is shot and in need of a replacement. You can have Apple replace the battery for a flat fee or you can send it into a third party repair center for a bit less.
Not much else you can do for troubleshooting this one.
B-rock

My MacBook Pro 2009 won't turn on. It suddenly won't charge and when it did I shut it down and now it won't turn back on. Charging shows green and the green little dots are showing on the side. I tried smc reset, command p r, what else?

My MacBook Pro 2009 won't turn on. It suddenly won't charge and when it did, I shut it down and now it won't turn back on. Charging shows green and the green little dots are showing on the side. I tried smc reset, command+p+r. Any other suggestions before i take it to apple service center?

A four year battery could be dead. I'd contact an Apple Service Center.

Nano won't resume tune when turned on again - jumps to next one.

Similar Messages

Maybe you are looking for