Nano won't shut down after disconnect

I have a sleek black 4gb nano with software version 1.2 and the latest iTunes (ver. 7)
When I connect my iPod to charge/sync and then disconnect it, the iPod's power goes on and I can't turn it off!
I try holding in the play/pause button, but it doesn't work.
The only way of turning it off is by first playing a song and then turning it off while it is playing!
is this a common ver. 1.2 error, because I can't remember having that problem with the previous versions.

No wories, iTunes 7.0.1.8 Solves this problem.

Similar Messages

7th gen iPod nano won't turn on after disconnect.

7th gen iPod nano won't turn on after disconnect. I loaded some new music, synced and ejected correctly. screen went black on unplug. Waited, did the button trick, didn't work. plugged it back in & it is recognized immediately. restored, resynced & ejected again. same thing-black screen w/ no response. Charged it overnight. ejected, screen then went to language setting. OK for English, eject & back to black on unplug. Switched ports for cable, tried eject thru PC...all resulting in dead nano after unplug. I really don't want to charge into the store & take it out on the poor kid who will catch the brunt of my frustration. anyone have a suggestion?

Hello Marie,
I would be concerned too if my iPod nano was not powering on. I found an article for the 6th generation iPod nano that has steps you can take for an issue like this (the only difference for the 7th generation iPod nano is the steps you will take for the reset. I included the steps to reset a 7th generation iPod nano below):
Will not turn on or screen remains dark
Connect iPod to power for at least ten minutes to ensure that the battery has enough charge to allow iPod to turn on.
If iPod does not turn on after ten minutes, try resetting the device while it is still connected to power. Reset the iPod by holding down the Sleep/Wake button and the Volume Down button for at least eight seconds or until you see the Apple logo appear.
If the Apple logo appears on the display, connect iPod to a computer and verify that it appears in iTunes and can play music. If iPod appears in iTunes and can play music, no further troubleshooting is needed.
If the screen remains dark and will not turn on, then your iPod may need service.
You can find the full article here:
iPod nano (6th generation): Hardware troubleshooting
http://support.apple.com/kb/ts3474
All the steps apply to the 7th generation except the steps for the reset. To reset a 7th generation iPod nano, use these steps:
Press and hold the Sleep/Wake button and the Home button for six seconds, or until the screen goes dark. The Apple logo appears after a few seconds, and then the Home screen. You may need to repeat this step.
I got these steps from this tutorial, which may also help with your iPod not appearing in iTunes:
iPod nano not appearing in iTunes
http://www.apple.com/support/ipodnano/assistant/itunes/
Thank you for using Apple Support Communities.
Best,
Sheila M.

My Mac 10.7.5 won't shut down after new software (security update 2013-003) installation-- hangs at grey screen with "software update" at top. It also intermittently goes to sleep without my asking. What to do?

My Mac 10.7.5 won't shut down after a new software installation (Security Update 2013-003). It just hangs at a grey screen with "Software Update" at the top. I have to force quit, then restart-- but the new software hasn't installed.
My Mac also intermittently goes into Sleep mode, repeatedly, unprompted by me. I suspect a connection between these two problems.
I have tried deleting the /Library/Updates folder. It hasn't helped. The update still won't install, and my Mac won't shut down without my forcing the quit.
Help please!

Hi, I've just come accross the same problem... did you manage to get a resolution??
Cheers, Chris.

Iphone 4 shuts down after disconnecting from power cable

My iphone 4 completely shuts down after disconnecting from power cord. The screen goes blank. However, if I re-plug the power supply it turns on with the date and time changed but my battery status is 86%.

Reset, hold both Home and Power buttons for about 15 seconds until iPhone restarts. If everthing is OK, great. If not, connect to iTunes and try to Restore the Firmware. If still problems, make appointment with Apple Genius for Warranty service.

My Mac won't shut down after upgrading to Panther

I recently upgraded to Panther 10.3 from Jaguar 10.2.9. After Panther had installed successfully, I used software update and I'm now running Panther 10.3.9. However, since then my Mac won't shut down. It doesn't hang or freeze - it just does nothing at all.
I've made sure no applications are running or have frozen. I've tried booting up from the OS X disk and running Disk Repair, and I've also tried using the 'fsck' tool. (I entered '/sbin/fsck -f' in single-user mode). Nothing has worked.
Now each time I want to shut down, I have to force shut down. Can anyone help?
800 MHz PowerPC G4 Mac OS X (10.3.9) 1.5 GB SDRAM

Hard shutdowns can cause disk damage. You are better off leaving your Mac on until the problem is sorted.
Have you disconnected all peripheral devices (unmount firewire drives before disconnecting) except Apple keyboard and mouse and tried shutdown? Often peripherals can kick back a signal to the cpu preventing shutdown.
-mj
[email protected]

External hard drive won't shut down after switch from OS10.5 to OS10.4.11

i recently chanded my OS from 10.5 to 10.4.11 (as a programme i want to use is not compatible with leopard), but since i have done this my external hard-drive won't shut down automatically when i shut down my mac. i have to switch it off at the plug instead.
can anyone suggest how i can get it to do this again?
i'm a little concerned that i'm damaging the external drive by turning it off manually all the time..
thanks

Some hard drives shut off with shutdown, some don't. Sometimes hard drives that did shut off with one system will not do the same with a different system. My hard drives which did shut off, prior to 10.5 now stay on.
This is not really a problem as all hard drives spin down after 10- 20 minutes when not in use, whether your computer is on or off. Leaving the drive on is fine, shutting it off manually is fine.
-mj
[email protected]

10.5.8 won't shut down after bad SD disk removal. It stops all applications but won't get past the final shut down screen.

I had a disk error with a SD disk from my camera. Removed the disk from the card reader and got the Disk Removal Error alert. Then the whole thing froze up on me. Noting else would eject, No other apps would shut down and basically nothing worked. I couldn't shut down so I removed the battery. Restarted the computer ok then tried to repair the SD disk in question. No luck on the repair so ejected it again. Then tried to restart OS and it won't shut down again except everything still works but it just won't shut down.

Some hard drives shut off with shutdown, some don't. Sometimes hard drives that did shut off with one system will not do the same with a different system. My hard drives which did shut off, prior to 10.5 now stay on.
This is not really a problem as all hard drives spin down after 10- 20 minutes when not in use, whether your computer is on or off. Leaving the drive on is fine, shutting it off manually is fine.
-mj
[email protected]

MacBook Pro sometime won't shut down after Lion installation.

After installation of Lion my new MacBook Pro (early 2011) sometime won't shut down in the normal way and I have to shut it down using the power botton.

Make sure you quit out of all programs prior to shuting down if you have not done so.
Boot up from your install DVD and run "Repair Disk" from the Utility menu.

IPod nano 5th gen shuts down after 2 minutes of playing music while on battery. Any suggestions?

Ipod nano shuts down after 2 min of playing music. Battery problem? Any suggestions? Thanks.

Make sure your headphone plug is pushed all the way into the connecton until no silver is showing. You will hear a click and feel it snap all the way in.

IMac won't shut down after using Time Machine

Here is the thing: My iMac (late 2009, 24", 8 GB RAM) won't shut down when I use my external HD for Time Machine. After the back up I try to eject the external HD but the icon won't disappear on the screen, it only gets blank and is not clickable anymore. It is still visible in the menu of the Finder but with no ejection sign anymore. Programs that were open before won't close even if I use the forced shut down function. But it seems like they are closed as they don't appear on the list anymore. When I then try to shut down the whole system the screen goes black and the wheel turns for hours! So that I finally have to shut it down manually.
This happens only after using the external HD for the back ups and when I then try to eject it. If I don't eject it everything goes normal. If I don't connect it everything goes normal. Sure, you might say, hey leave it plugged in then. But as it is a 3 TB HD I also use it for my MBP so I have to eject it
Is this a known issue or a bug in the system of Yosemite? With Mavericks everything worked really well - no problems at all. On the MBP (late 2011, i7, 8 GB RAM) it also works well. So I am kind of annoyed the I always have to shut the iMac down manually which can't be that healthy for the system.
Any insights on that issue are highly appreciated - thanks a lot!
Birgit

Okay, just realized that the same problem occurs with the MBP after rejecting the external HD
Icon gets blank, cannot be clicked anymore, while shutting down the MBP normally the screen goes black and the wheel is turning forever but nothing else happens. So I have to force it to shut down.
It seems to be a general problem with connecting an external HD once in a while for doing a time machine back up regularly and then eject it. So the question is: who has the same problem or does everybody have their HD permanently connected to their Macs for Back ups? Either by USB or WLAN? It never was a problem wit Mavericks and I don't want to permanently back up my system every hour - once a week is good for me BUT this cannot be adjusted in the time machine settings which would be a very good idea.
Any solution is still highly appreciated !!
Thanks a lot,
Birgit

Won't shut down after Tiger 10.4 install

After I installed version 10.4 the computer won't shut down. It will sleep, but won't restart or shut down. I just use the power button. It worked perfect before I upgraded. All advice is appreciated because I know nothing!

Hi there,
I found some references to items I got rid of (Virex and Konfabulator) in my Login Items... I checked my Console and there is a lot of repeating stuff like this:
Jan 19 19:56:53 Whitney configd[36]: AppleTalk shutdown failed, status = 71 (retrying)
Jan 19 19:56:54 Whitney configd[36]: AppleTalk shutdown failed, status = 71 (retrying)
Jan 20 06:22:57 Whitney /usr/sbin/AppleFileServer: AFPServer::AbnormalATListenerShutDown - clear listener
Jan 20 06:23:05 Whitney webdavd[568]: unexpected statusCode 503
Jan 20 06:23:05 Whitney webdavd[568]: network_mount: OPTIONS failed; file: mount.tproj/webdav_network.c; line: 2729
I don't know what Appletalk is, I am looking around now to try to find out.
Thank you, again, for your help.
imacmom
iMac G4 Mac OS X (10.4.3)

Mac won't shut down after 10.6.8 update - a possible fix

I noticed that after updating my MacBook Pro to 10.6.8 (using the latest 1.1 combo update) that often times when attempting to shut-down after using Safari the computer would just hang or, I'd get a message that said something like, "OSX didn't log you out because Safari did not quit...".
After putting the system into SAFE BOOT mode and trying to launch Safari I was getting tons of errors about Flash Player plug-in 10.6 crashing.
After downloading the latest Flash player plug-in from Adobe the hang-on-shutdown behavior seems to have stopped.
FYI for those who haven't found a fix.

Hi, I've just come accross the same problem... did you manage to get a resolution??
Cheers, Chris.

Firefox mobile won't shut down after exit

Android RAZR v2.3.6
After exiting Firefox, the app stays running in the background and eats my battery. Killed it yesterday in just 4 hours. My phone runs hot while firefox is running and after exiting Firefox.
Doing a complete power off and back on doesn't work, Firefox starts back up and it is in my running apps again. It won't accept a force shut down either.
Yesterday I couldn't get Firefox to shut down until I plugged the phone back into the charger. Then it finally went away on the running apps list.

Not exiting when it goes to the background is normal and expected behavior for an Android application, but using all your CPU and ending up eating your battery sounds like a potential bug.
We released a significantly updated version of Firefox for Android today, so the first thing to try is probably updating to that. If the problem persist, please report a bug in Bugzilla. We'll really need to know at least the version you're using, though.

Computer shuts down after disconnecting power

Help! My son has purchased the Envy 15 and loves it BUT we have an issue with the battery. He has both batteries connected and the laptop plugged in. He unplugs the laptop - both batteries are at 100% and within a minute, it shuts off. It doesn't shut down, it's like it suddenly doesn't have power. The machine will reboot, on the batteries, no problem - but of course, windows hasn't been shut down, so its not a "graceful" reboot. When looking at the battery power after, Battery #1 is at 100% and Battery #2 is not present. It obviously has power as we can reboot without reconnecting the power. It only appears to happen when the second battery is connected. We are on the HP recommended power plan with no adjustments.
When I plug it back in, it still says there is no second battery present.
Help? Any ideas?
Plus, does anyone know if you can lock the function keys - he does a ton of gaming and uses the function keys, so the direct action keys are not a plus for him.
thanks!
Caroline

Sounds like battery #2 has a short. When the system detects a critically low battery, it is likely to devote all power to battery charge until the batery reaches 5% or so. Try each battery seperately. If no power at any time, remove the battery, disconnect the AC adapter. Press the power switch for about ten seconds. Then connect the AC adapter, let it boot, then install the battery and check the charging status. This resets the power manager. I think one battery id bad, but you will need to test them one at a time. Good luck.

My Macbook Pro won't shut down after installing Lion. Anyone have a suggestion to fix this?

Just installed Lion, and it won't shutdown!
The only way it'll shut down is if it drains the battery.
Help!
J

Lots of other people are complaining about their Macs taking long times to shutdown. Some solved it by reinstalling Lion from scratch (without using a Time Machine backup and simply copying all their files on to the new install).
Others discovered old software that is no longer compatible with Lion (I found Mac The Ripper in mine, plus many others on day 1). I uninstalled some apps using App Cleaner (google it, it's free and it's awesome).
I was having a hard time shutting down my macbook pro, now it's back to normal.
Try finding applications that are not compatible with Lion. Their icons should be greyed out and with a diagonal line crossing it. Make sure you erase these applications and library related files, which is very simple if you use App Cleaner. And make sure you look into sub-folders inside the Applications folder, as I missed a couple because they were not immediately visible.
Hope it helps. If it does, let us know.

Nano won't shut down after disconnect

Similar Messages

Maybe you are looking for