Nano won't update music

I'm having trouble updating the music on my iPod through iTunes. It all began last night while I was charging my iPod, after I charged it, I noticed everything was erased?! After that I tried the 5 R's and still nothing. Then I had the apple screen come up without the backlight, then it would flash to the screen with the backlight. It would keep doing this for quite a while. I decide to re-install all software and it seemed to help the problem after I put the iPod in disk mode. Now the iPod's screen is stuck on Do Not Disconnect. When I click in the task bar to safely remove hardware, after it removes the iPod, its stuck on: Ok to Disconnect...so I disconnect and the iPod wont respond. When I put the iPod into disk mode, it shows up in iTunes, but it wont update my iPod with new music. I've tried deleting every song from iTunes and adding them in again, that still didn't work. It seems I've tried everything with no luck. Someone please help.

7. After the restore is complete and the iPod is connected to the computer, the iTunes Setup Assistant window will appear asking you to name your iPod and choose your syncing preferences similar to when you connected your iPod for the first time.
After I restored the iPod, the screen went to the Do Not Disconnect message again. It never asked me to name my iPod or choose my syncing preferences?

Similar Messages

  • Nano won't update

    My beautiful ipod nano is prooving to be more trouble than it's worth....nowadays it won't update. It's recognised on my pc and everything and new songs go onto my library no problem but when it claims to be updating "mr pod" it's not!
    Any ideas?

    If you have all your songs backed up in iTunes then try restoring your iPod. This will erase the hard drive, reload the software and return the iPod to factory settings. A fresh installation of the software will hopefully get it back updating for you as usual: Restoring iPod to Factory Settings

  • Fifth Generation iPod won't update music

    My new fifth generation 30gb iPod refuses to be updated. It worked fine until I transfered a few photos onto it and now unless I have the "synchronise photos from" check box checked, I no longer have the option to update. When I have the box checked it only updates for photos. I have restored it once so far with the same problem returning as soon as I transfer photos. Any clues on how to sort this would be appreciated.
    Pentium4 1.8ghz   Windows XP Pro   1gb ram

    My 30GB ipod wont update music videos. I bought a
    couple of music videos from the itunes store and
    after they downloaded I connected my ipod to my emac
    and a error message popped up and said that the
    videos werent the right format. What is the right
    format and how do I go about changing it??? What do I
    do?
    Does the message say that the files cannot be updated to the iPod because they cannot be played on the iPod?
    Go into the "music" tab on the iPod settings, make sure the option that says "include music videos" is checked (if you had to check it, click "apply")
    You could try selecting the file in iTunes, and then clicking File > Get Info. See if all the Summary tab information is missing. If it is, something might have happened during the download. You might want to go into your purchase history and report a problem with it. In most cases, iTunes will let you redownload the file.
    The problem is, everything downloaded from the iTunes Store is a protected file, so I don't think anything is going to let you convert it. Protected files usually can't be converted...
    CG

  • Nanos won't update or restore

    Hello all, I'm new to the forums and fairly new to apple products. I have never really been a big fan of apple just because, and itunes and the nano are now giving me a good reason. I have several gripes about overall itunes functionality, but thats for another section of the forums. My big issue is that my nano will neither update or restore, and I get the message "Could not update ipod 'Ben's Ipod', an unknown error occured (1417)" or "Could not restore ipod 'Ben's ipod', an unknown error occured (1418)". During the attempted "update", the ipod looks like it just goes into the charging mode and has no indication that there is a data connection with the computer. I have come to believe that it is itunes, as i have tried with several nanos (both of my younger brothers have them) and also a shuffle (one of my friends has one) with the same results. I have a very clean install of windows, and the virus protection is disabled. I have tried restarting services and all the other usb ports to no avail. Can any of you help me? I'm just baffled.
    Custom Build P4   Windows XP Pro  

    hmmmmmm.
    it might be worth quickly checking on the issue from this document:
    iTunes for Windows: iTunes 7 doesn't recognize iPod
    (my diffidence here is because it's a fairly new issue, and i don't have a good feel for the "symptom sets" associated with it ... still, it does no harm to check.)

  • Nano won't update or restore

    I just got a Nano, installed the original iTunes & iPod software off the CD, and was able to import and transfer music onto the nano. Yay. I learned that iTunes had an update, so I downloaded & installed that without incident. Yay. I then learned that there was an update to the iPod software - I downloaded that, and during the install, things became hosed. "Do not disconnect" displayed forever. I did a reset of the nano, disconnected it, and saw that the nano was now empty. I have attempted the "5 R's" over & over, with no success. I cannot do an update to the iPod, nor a Restore, because neither iTunes nor iPod Updater recognize the iPod as being plugged in. Also, when I plug in the iPod, iTunes no longer automatically loads. Nothing works right anymore. I've looked through so many help files, nothing has helped so far. Any ideas?? Pls help!

    wow man i have exactly the same problem than you , and i have tried all under the sun, im from venezuela but a friend of mine broght me from us an ipod nano of 4 gb, everything was correct until i decided to update my ipod , but during the install the message do not disconnect displayed forever, then, obviously i disconnected my nano after one hour ago or maybe more, but my surprise was that i didnt have neither music nor photos inside mi ipod, i cannot do an update, nor s restore because neither itunes nor ipod updater recognize the ipod as being plugged in. I don´t know what to do, but take this advice my friend, never update your ipod anymore, cause that problem can repeat over and over again, and the apple people know it, hey biff try to give back your ipod for warranty service cuz they will know exactly what to do with your ipod, bye man we are in contact, good luck

  • IPod Nano Won't Update Or Restore To 1.1.3

    I tried to update an iPod nano to 1.1.3 using iTunes 7.2 and the update froze after being prompted for an admin user id and password. After 10 minutes I killed iTunes and then tried to update the nano again after iTunes discovered it was in recovery mode. That too froze and I had to kill iTunes again.
    I then went through the nano reset procedure and put the nano in disk mode and formated it. The format seemed to work, but the restore to 1.1.3 still freezes.
    This nano has had no problems until I tried to update it to 1.1.3.
    Any idea what to do now? Maybe try 1.1.2? Where can I get it?
    Thanks.

    I not only cannot update the nano, I can't copy music to it either. These problems occur on an iMac G4.
    I was able to update the nano and copy music using my iMac G3 running iTunes 7.0.2.
    So I went back to the iMac G4 and tried all of these things:
    1) Moved the nano to another USB port
    2) Used the cable from the iMac G3 on the iMac G4
    3) Rebooted my back-up disk and ran iTunes 7.0.2
    None of these changes fixed the problem. I still cannot copy music to the nano on my iMac G4.
    Any idea why the G3 works and the G4 fails? Could the 1.1.3 update be the problem?
    Thanks.

  • Ipoe nano won't update library

    I was working great w/ my McAfee virus scan- then swithched to Norton Anti virus2006- now when I try to update my music library it will not accept it- keep getting message- this port will not accept this hardware( the cable that connects nano to usbport. I was on w/ apple rep for a long time- he checked everything out- he says problem w/ Norton virus scan- anyone else encounter this. Help- I can't update anything that is on my nano now for weeks/

    YES, IT WILL WORK IF i DISABLE NORTON- BUT THEN i HAVE TO REDO THE WHOLE THING ON THE LIBRARY

  • IPod Nano Won't update,says playlists no longer exist,

    I am really getting frustrated with my iPod nano. First it started off by not updating songs. Then it started to erase songs when i connected it to itunes. So i erased everything hoping that would fix it. But now when I try to put them back on the computer says iPod update complete but there are no songs. It also say that the iPod can't be updated because the playlists no longer exist.
    If anyone knows how to fix this problem please respond as soon as possible.
    Thanks

    Ok, first try a restore. Next, on the playlist issue...
    Did you delete the playlists from iTunes? If so, then the iPod is trying to automatically update, but it can't, since the playlists no longer exist. Try putting your iPod into manually update; you can find that in the iPod Options tab.

  • IPod Nano Won't Update

    My iPod's songs were all deleted. They're all still on iTunes, however, and every time I try to update them back on I get the message "Songs on the iPod 'murf' cannot be updated because the playlists selected for updating no longer exist." There are NO playlists!
    Help me, please!

    You have probably deleted playlists which are listed to be downloaded.
    With the iPod connected, in iTunes choose Preferences>iPod, click the Music tab, and make your choices accordingly.

  • Nano won't update new songs from library

    When I first connected nano, my itunes copied all my songs to the ipod very well. But if I add new song to my library, connect ipod nano to my computer, it says updating, done. But the song isn't in my nano. Whats going on? PC user.

    Have you tried Restoring iPod to factory settings with the Latest iPod Updater?

  • Nano won't update and I've tried everything

    I've read many other comments about situations similar to mine, but have yet to find a solution that works. When I first got my nano, I hooked it up, it downloaded my Itunes library and everything worked great. Then a few days later, after I had added more songs to Itunes, I hooked it up and it said it was updated but none of the new songs were actually on the nano. I've checked the song files, they're okay. I've done the 5 "R's" about 20 times. I've updated my Itunes and Ipod software. I even resorted to "restoring" the Ipod which also didn't work. Since it will no longer download anything and I've restored it, now there is nothing on the nano. I've tried renaming it, changing my settings and dragging the files to the nano icon manually and again, it says it is updating, but when it's done there's nothing actually on the Ipod.This has been going on for more than a week as I struggle to find a solution and I'm so frustrated I'm wondering if I need to send it back. Please help!

    Bug fixes:
    iPod Updater 2006-01-10 delivers:
    * iPod Software 1.1 for iPod
    * iPod Software 1.1 for iPod nano
    * iPod Software 1.2.1 for iPod with color display
    * iPod Software 1.4.1 for iPod mini
    * iPod Software 3.1.1 for iPod with Click Wheel
    For all other iPod models, iPod Updater 2006-01-10 contains the same software versions as iPod Updater 2005-11-17.
    Important: After downloading the iPod Updater software, connect your iPod to your computer and launch the iPod Updater application. If iPod Updater determines that your iPod needs to be updated, click the Update button to install the latest software on your iPod.
    Features of iPod Software 1.1 for iPod, and iPod Software 1.1 for iPod nano:
    * Support for the iPod Radio Remote
    * Bug fixes
    Changes to iPod Software 1.2.1 for iPod with color display, iPod Software 1.4.1 for iPod mini, and iPod Software 3.1.1 for iPod with Click Wheel:
    * Bug fixes
    Regards
    Colin R.

  • Nano won't update or restore in iPod Updater

    -My nano when connected to my PowerBook does not show up in iTunes
    -When iTunes is opened, it askes if I want to do a software update for the iPod
    -In the updater, it says that it is formated in Windows, and will not allow me to restore it (saying that I need to hook up with a Firewire), nor will it let me update it (saying that only macintosh formatted ipods can be updated).
    -I know that i need to restore it in OSX but it will not let me, and using the disk utility to restore it has not seemed to help.
    -I tried using a windows computer to restore it, which i was able to do, but it would not let me update it on my mac.
    Any suggestions?

    Try to download and install the latest version of iPod software and iTunes
    http://www.apple.com/ipod/download/
    http://www.apple.com/itunes/download/
    Plug your iPod with your Mac, open the iPod updater and hope it will allow you to click RESTORE.
    If still doesn't then
    For Mac computer
    1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
    2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
    3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
    4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
    5. Eject your iPod and do a Reset
    6. Open the iPod Updater and click “Restore”

  • My iPod Nano won't update new songs onto it!

    Alright, so i went to go download new music one day in the Music Store and it said that I needed to download iTunes 6.0.2 or whatever its called. So i finally got the download to work and all my old music showed up and everything was fine. Then i decided to go and buy some more music (in the iTunes Music Store). All the downloads worked and everything and they play on my iTunes but when i plug my iPod into the USB port, it says its updating my iPod, and then it says it is complete but then when i look on my iPod itself, none of the new songs are there! I have no idea how to fix any of this so if someone has any suggestions that would be great!
    Presario 6000   Windows XP  

    Have you tried Restoring iPod to factory settings with the Latest iPod Updater?

  • New Ipod Nano - won't update "not enough space" but its empty!!

    My wife's iPod Nano is brand new (I have a Video iPod so iPods are not new to me!)
    I get the message that the iPod cannot be updated because library is too big etc....
    What I did:
    I reinstalled iTunes.
    Restored library and unticked all tracks.
    Downloaded updater and restored iPod Nano.
    Tried to update "only checked" tracks - didn't work. Restarted system - settings of "checked songs" were saved - got same message.
    Tried unchecking this and doing "only sleceted playlists" with a playlist of 208MB (iPod Nano model is 1Gb) - still got same message.
    Tried everything I can think of - still no joy
    Adam

    Thanks for the suggestion but I am not using it as Firewire HD and I unchecked "enalbe disc use" anyway.#
    Something is definitely not right somewhere - when I switch to manual management of tracks it works fine - its just a pain to do that all the time.
    Cheers
    Adam

  • Ipod won't update music and i get wierd error messages

    I've never gotten any error messages with my ipod before, i've been trying for about an hour to get it to update my music. I'm backing up my music to make sure i don't have to worry about losing it all when i try restoring. My itunes tells me that my ipod software is too old but on the summary page it says its up to date, can anyone help me with this?

    Hi
    Have a look
    http://discussions.apple.com/thread.jspa?messageID=3125481&#3125481

Maybe you are looking for

  • Podcast conversion painfully slow; can't add chapters while recording?

    I'm finding GB3's conversion to m4a very, very slow. For the last six months, I was using GB2 to mix my audio, iTunes to convert to m4a, and PodcastAV to add chapters and pictures. The mixdown process takes the same amount of time (10 minutes for an

  • Actionscript in LiveCycle

    I'm in need of using some actionscript commands, is it possible to include that same commands into the livecycle??

  • First Try and JSP with JavaBeans

    Hi: I've installed Tomcat 3.3.2, and have made no configuration changes. I'm trying to create a JSP that uses a JavaBean. This is my first attempt, and there's nothing exciting about my try. Below is the JavaBean, that compiles just fine: import java

  • Uml tools for jdeveloper

    hi is there any UML Tools for JDeveloper that works on windows and mac or any one of them that does code engineering and database modeling also ?

  • Where's my Home icon?

    I bought a new computer yesterday (a 20-inch Intel dual iMac). I used Migration Assistant and iSync to move everything from my old G4 iMac. But Safari on the new computer no longer has that little house icon to click to return to your home page. I've