Não acesso notícias após os portais. Entram sites de propaganda. (?)

Nos sites de notícias, tipo G1, ou Terra, abre o portal mas, ao clicar nas notícias entram sites de publicidade ou não entra nada.

Só acontecia nos G1 E Terra.. Mas acho que resolvi o problema deletando, na barra de endereços, os sites de publicidade. Pelo menos hoje funcionou... Obrigado pela sua resposta fczuardi. Se alguém puder explicar porque isso aconteceu (ou acontece) gostaria de saber.

Similar Messages

How do I connect Apple 20" Cinema Display to orignal MacBook Air which does not have a Fire-Wire port. Is this possible? Any advice would be appreciated. I have the Micro-DVI to DVI adapter. Norm

I Wish to connect my 6 year old Apple 20" Cinema Display to an orignal MacBook Air which does not have a Fire-Wire port. Is this possible? Any advice would be appreciated. I have the Micro-DVI to DVI adapter. Norm

The FireWire cable is just for the FireWire ports on the display. The display will run without it.

HP Color LaserJet 3600(not 3600n) with Fast Ethernet port - can I use it?

Hello! There is a HP Color LaserJet 3600 in our company connected via USB with XP-based PC. Recently I decided that we need this printer be shared directly trough our ethernet network, so I started to learn manuals - its own manual, Jet Direct, and all that stuff. The printer's manual says that HP Color Laserjet 3600 does not have neither its own ethernet port, nor support for embedded print-server like JetDirect 620n.
But!
Visual check shows that this HP 3600 DOES have its own ethernet port and if I connect it to network or at least to a notebook - it blinks like any other ethernet port with "lights" should do.
However.
Neither front panel, nor back panel says anything about network support(like letter "n" in model name).
Configuration page print also does not know about that mysterious port.
So my questions are:
1. What is this port actually?
2. Can I use it to share printer over network? Maybe, there is a way to upload 3600n's firmware somehow?

The product you have seems to be a commercial printer. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
You may find the Commercial Laserjet board here.
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
You can also find the article pertaining to this product here:
http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesI...
(contains basic troubleshooting info, manuals, drivers, etc)
Hope this helps!
Help the community by marking this post as a solution if it solved your issue!.
If my post helped you in any way, please click the blue KUDOS star under my name! It would mean a great deal.

Can't use my HP Deskjet F4580 Wireless Printer with the AirPort Extreme Base. The printer is NOT connected at the USB port of the AirPort Extreme, and is placed in another room. It worked just fine with my previous router (Linksys WRT54G). Help me!

Hey Guys!
I just got my AirPort Extreme Base, but I can't use my HP Deskjet F4580 wireless printer with it.
The printer is not connected to the AirPort Extreme's USB port. It is placed in another room, and I'd like to use it (the printer) wirelessly (not connected to the USB port os the AirPort Extreme), as I used to. There is no place for the printer close the AirPort Extreme. It worked just fine with my previous wireless router (Linksys WRT54G). I'm very disappointed with the AirPort Extreme Base Station because of that!...
Can you help me? Please?!
Thanks Folks!

This must be a tough one, no suggestions at all.

I am not able to access the sharepoint:80 site using the local IP address.

I am able to access the Central administration using the Local LAN IP address and the port number, but, I am not able to access the sharepoint:80 site using the same local IP address without the port for the central administration. I tried adding
the local IP address in the Alternative Access Mapping to no avail. Any ideas, where I should look, is much appreciated.

Hi，
By my test, I set the Alternative Access Mapping for the SharePoint 80 port web application as below and it works fine:
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Eric Tao
TechNet Community Support

There is a problem with the proxy server's security certificate. The name on the security certificate is invalid or does not match the name of the target site "Mailserver"

Good day Guys
First of all I am not an Exchange Expert, and I might be asking a very stupid question, but please bare with me. :)
While I was on leave our Mail server fell over and The company got a Specialist to help out for the time being.
We where\are on Microsoft Exchange 2007 , which Fell over, and the specialist was able to recover as much data as he could.
They then installed Exchange 2013 and tried to migrate everything from 2007 to 2013 and not everything migrated over.
But the problem is, Outlook Anywhere was enable on 2007 and worked a 100% (before the disaster)
With Exchange 2013 I get the following error message when trying to connect With Outlook 2013, using an external connection:
"There is a problem with the proxy server's security certificate. The name on the security certificate is invalid or does not match the name of the target site "Mailserver"
Outlook is unable to connect to the Proxy server. (Error Code 0)"
Has anyone had the Similar when migrating over from 2007 to 2013 or is this an Issue on IIS and nothing to do with Exchange migration?
Your assistance will be greatly appreciated.

Hi,
Firstly, I would suggest we use Exchange 2013 FE as the Outlook Anywhere proxy server.
For the certificate issue, it mostly occurs because the host name that Outlook are trying to access does not match the certificate SAN. Please check with this point. If they do not match, you
can change the host name by referring to the following article:
https://support.microsoft.com/kb/940726/en-us?wa=wsignin1.0
Thanks,
Simon Wu
TechNet Community Support

Web links do not show as visited according to my color selection in content menu. visited siles/links should be in red, mine are not chsnging sfter a visit to a sits.

web links do not show as visited according to my color selection in content menu. visited sites/links should be in red, mine are not changing after a visit to a sits. A good example would be a visit to a news article in google. mu colors are set to res for visited sites - it does not happen, in fact nothing changes

Google is using a visited color (#551a8b) that is hardly distinguishable from the unvisited color (#2200cc), so may not notice it.
* Make sure that you not run Firefox in (permanent) [[Private Browsing]] mode
* You enter Private Browsing mode if you select: Tools > Options > Privacy > History: Firefox will: "Never Remember History"
* To see all History and Cookie settings, choose: Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
* Uncheck: [ ] "Automatically start Firefox in a private browsing session"
You can look at these prefs on the about:config page to make sure that you keep history.
*http://kb.mozillazine.org/browser.history_expire_days (180) (also affects saved form data)
*http://kb.mozillazine.org/browser.history_expire_days_min (90)

Crawl issue - warning: "This URL is part of a host header SharePoint deployment and the search application is not configured to crawl individual host header sites. This will be crawled as a part of ....a start address"

Hello all,
I have a multi-tenant environment in SharePoint 2010 server. Different tenants are hosted by one web app.
One content source has been created to crawl the all shared environment. (the only URL added in the content source settings = URL of the
web app)
Crawl everything under the hostname for each start address has been selected when creating this content source.
Now I have created a new tenant hosted by the same web app. For this new tenant I want to have a different crawl schedule. Simple , I just create a new content source and add the host URL of this tenant. With the same settings has the other content source.
After having started a full crawl I get 0 success and 1 warning : “This URL is part of a host header SharePoint deployment and the search application is not configured to crawl
individual host header sites. This will be crawled as a part of the host header Web application if configured as a start address.”
The first content source is well crawling the new tenant freshly created. Could you tell me where I’m wrong?
Thanks in advance
Regards
Baldo

Baldo,
In the configuration that you described you now have 2 content sources set to crawl the same content. If you have a content source with a start address of http://servername/ then it is going to crawl everything past that address. If you are now changing
the crawl schedule based on the individual site collections, you will need to move your start addresses further down the URL.
For Example:
1st Content Source:
http://servername/ as a start address would now become
http://servername/site1
http://servername/site2
2nd Content Source:
http://servername/site3
Also remember that all crawling must happen on the default zone. If you are trying to crawl a zone that the web application has been extended into, that will not work.
ScottC - Microsoft SharePoint Support

Thunderbolt not a functional Mini Display Port? (2011 Mac Mini i5)

I was under the impression that the Thunderbolt connection could also be used as a standard mini display port to connect a display port monitor (HP ZR24w). I picked up a mini display port to display port cable to try it out... No signal.
Shouldn't this work or is the Thunderbolt connection in fact not a functional mini display port?

As I understand it, going from DVI to mini-displayport is not as easy as going the other way. And far as I know, there are no mini-displayport video cards you can add to a first generation Mac Pro.
So what it looks like you need, is a device like the following.
http://www.atlona.com/Atlona-DVI-to-Mini-DisplayPort-Converter-p-17859.html
Edit: Jinx!

Safari browser 5.0.6 not displaying all images on a specific site

I have a MAC running on PowerPC G5, with an OS X Version 10.5.8. I am using Safari browser version 5.0.6. I have been using the browser for years with out any problem until last week. All images show up on all sites except on one specific site. When i use Firefox to open this specific site, all images show up normally without a problem.
I have tried different methods suggested online including within this site, but the problem still persist. Can any one assist me on how i can resolve this problem and why images do not show up fully on the specific site when using Safari browser version 5.0.6?

If possible, i can send you the link via email. Please send me your email address so i can send you the URL link.
<Email Edited by Host>

Can not specify the SMTP server port, username and password for my SharePoint 2013 web application

We have our SMTP server under port number 141 and we should add username and password. but inside SharePoint 2013, I can only define the SMTP server name , from email, reply-to . But there are not fields to define the port number , the username and password.
So can anyone advice from where I can define the port number and other field settings for the SMTP server ?
Thanks

i am no sure about user name and password. i never saw that option.
check this guide:
http://blogs.technet.com/b/tirumals/archive/2012/03/17/step-by-step-configuration-of-outgoing-emails-from-sharepoint-to-microsoft-online.aspx
http://blog.fpweb.net/configuring-an-smtp-server-for-sharepoint/#.UuANoxAo6M8
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog
thanks for the reply, but in our case the SMTP is a separate server , and to connect to it i need to define the ; server IP /Name , port number, username & password. but in SharePoint there is no option to define the port number , and the links you
provide are regarding configuring SMTP server, while we already have an SMTP server but i need to connect SP with it . can you advice please?

Project Server 2013 - User does not have permission to create a WSS site

We have Auto-Publish enabled for the project by the Owner. The issue is that when a user submits his updates, the updates are auto approved and auto-published but it also ends up showing below error to the user.
General
•User does not have permission to create a WSS site.:
◦GeneralSecurityAccessDenied (20010). Details: id='20010' name='GeneralSecurityAccessDenied' uid='---'.
•Queue:
◦GeneralQueueJobFailed (26000) - CreateWssSite.CreateWssSiteMessage. Details: id='26000' name='GeneralQueueJobFailed' uid='---' JobUID='---' ComputerName='---' GroupType='CreateWssSite' MessageType='CreateWssSiteMessage' MessageId='1' Stage='' CorrelationUID='54a0c79c-da9b-c011-2554-5fb474e440c6'.
For more details, check the ULS logs on machine --- for entries with JobUID ---.
And in the Project Queue, the failed job type and job state are
Job type- Project Site Update
Job State - Failed But Not Blocking Correlation
We have disabled Site Provisioning for Project publish.
Can anyone point us on how auto-publish works and what all permission is required by users or owners?

Hi Goahh,
It might be that your issue has nothing to do with the rules set to auto-publish the project. Try to inactivate the auto-publish for a test project and try if the publication by itself works. Or simply try to publish a project from MS Project Pro and see
if you still get the error message.
Has it been working before?
Check also that the "Manage SharePoint Foundation" permission is enabled for the security groups in question.
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

"Could not setup mach task special port 9: (os/kern) no access"

"Could not setup mach task special port 9: (os/kern) no access"
What is the latest on this daunting log entry?
MBLNASH

Switch to launchd, or [go digging (messageID=6015028)|http://discussions.apple.com/thread.jspa?messageID=6015028] and see if you can sort it out. Or ignore it.

Page not found error while opening sharepoint 2013 site

page not found error while opening sharepoint 2013 site
Please help me on this

Hi,
Please check the log file to find more information about this issue. The path of the log file is:
C:\Program Files\Common Files\microsoft shared\Web Server Extensions\15\LOGS.
In addition, please make sure the URL of the site is correct.
Please check whether you could access other pages in the problematic site.
Best Regards,
Wendy
Wendy Li
TechNet Community Support

I updated my mac book pro to mountain lion recently and my safari is not loading few web pages including apple sites please help me

i updated my mac book pro to mountain lion recently and my safari is not loading few web pages including apple sites please help me

I have this problem too but it seems pot luck and only like 5% of the time, the website will say the page is loaded but the page is just blank white...refreshing does not work and I have to go back and navigate to the page again

Não acesso notícias após os portais. Entram sites de propaganda. (?)

Similar Messages

Maybe you are looking for