NAP Agent - System Health Agent

Hi !
I'm working on a NAP solution and I am looking for informations about "third party health agent".
I want to know if it is possible to develop a Health Agent by our own or is it just reserve for same of the Microsoft's Partners.
I explain my point, if one of my client use a special Linux distribution in his industrial network, is it possible to create a Health agent which work on this distribution if we use NAP ?
I know that some people have already ask about this subject. A found an other topic but the question is a little different here because I'm talking about Operating Systems.
Thanks.

Hi,
Looks like there is a way to provide NAP service to non-windows OS clients, please refer to the following blog:
NAP clients for Linux and Macintosh are available
http://blogs.technet.com/b/nap/archive/2008/12/16/nap-clients-for-linux-and-macintosh-are-available.aspx
Microsoft has a Network Access Protection forum, I suggest you refer to the experts there for further support:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserverNAP
Bets Regards,
Amy Wang

Similar Messages

SCCM 2012 NAP Agent goes in and out of compliance approx every 2 min.

I have deployed the SCCM 2012 NAP Agent on a few clients and it goes in and out of compliance approx every 2 min.
So its compliant for 2 min then uncompliant for about 30 sec then compliant again. If I uninstall the single software update I have enforced with NAP on SCCM the update is remediated properly by NAP/SCCM but the cycling in and out of compliance continues.
I did have the agent in sccm set to 2 min evaluation cycle for testing purposes but have now reverted it back to one day. The Health Validation Point is set to 26hrs.
tconners

I reset the sccm NAP evaluation cycle again to 1 day and it took this time.
I cant explain why it was still stuck on 2 min.
tconners

Client System health certificate name issue

Hi,
System health certificate is generated using HRA server name for clients system.
There is no event log error for this. Can anyone suggest what can be the issue here.
Thanks,
Sridhar
Sridhar

Hi,
Could you offer more information about your environment? Such as your HRA configuration screenshot, now we assume you are using the intranet enterprise CA, because the HRA
will only request health certificates from the CA configured first in the order, unless that server is unavailable or has been identified as unresponsive, therefore maybe you have configure the incorrect CA order.
You can use the following procedure to modify the priority of CAs used by HRA, or to remove CAs from the HRA configuration. HRA will only request certificates from the first
CA configured in the list, unless that CA has been marked as unavailable.
To configure the order or to delete certification authorities using the Windows interface
1.Open the HRA console.
2.In the console tree, click Certification Authorities .
3.Right-click a CA name in the list of servers. Click Move Up to increase preference for this server in the order. Alternatively, click Move Down to decrease preference for
this server in the order.
4.To delete a CA from the list, right-click the CA name, and then click Delete .
The related KB:
Configure NAP Certification Authority
http://msdn.microsoft.com/en-us/library/cc731916.aspx
More information:
The Cable Guy: DirectAccess with Network Access Protection (NAP)
http://technet.microsoft.com/en-us/magazine/ff758668.aspx
NPS Best Practices
http://technet.microsoft.com/en-us/library/cc755120(v=ws.10).aspx
Certificates and NPS
http://technet.microsoft.com/en-us/library/cc772401(v=ws.10).aspx
Overview of HRA
http://msdn.microsoft.com/en-us/library/cc731872.aspx
Resources for using certificates with NPS and NAP
http://blogs.technet.com/b/nap/archive/2008/12/19/resources-for-using-certificates-with-nps-and-nap.aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Administration Utilities - System Health Monitor - alui 6.1

I'm curious if there is a way I can turn the System Health Monitor utility into a portlet?
It seems like there should an easy way to do this, but I can't seem to find it. Any insight you might be able to provide on either the System Health Monitor or the administration utilities. Or anything that might help for that matter, would be be most appreciated.
Thanks,
-Kevin

Hi geoffgarcia, thanks for looking into my question. I have tried to pass the existing URL back in, as you have suggested, but with no luck. For example:
> Create new Web Service : URL : http://[MYPORTALSERVER]/portal/server.pt?open=space&name=diagnostic&psname=ObjMgr&psid=3&cached=true&control=EditorStart&editorType=10
and then generate a portlet to that service. When I add that portlet to my homepage it throws a
"Error Error - The server has experienced an error. Try again or contact your portal administrator if you continue experiencing problems."
error, but doesn't log the error. View source shows the error to be
"Current User does not have sufficient permission to object with id = 52: com.plumtree.server.marshalers.PTException.... blah blah blah...."
Any ideas? Maybe I'm missing a glaringly obvious setting/configuration?
Thanks again,
-Kevin

Can't find System Health in Lenovo Companion for Yoga 2 12

Hi,
I've just got my Yoga 2 - 13. Downloaded the new Lenovo Companion app but unfortunately I don't see the System Health option under My System. Is there any additional app that I need to install?
Thanks
Solved!
Go to Solution.

Bob,
Great question!
Unfortunately, System Health in Lenovo Companion requires Lenovo Solution Center: http://support.lenovo.com/us/en/downloads/migr-73783. Unfortunately, Lenovo Solution Center is not available on the Yoga 2 (13”). We apologize for any inconvenience.
Mark
ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
Mark Hopkins
Program Manager, Lenovo Social Media (Services)
twitter @lenovoforums
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Daily System Health monitoring report from SOLMAN

Hi Experts,
I am working on a project where I need to triiger a consolidated system health report from sol man, much like early watch report.
Only thing is that it should be generated daily for each system.
Well That makes the expectation.
Progress so far :-
     a. Applied E2E120 for managed system ie Technical monitoring is working for that system.
Challenge :-
   a. Generating a consolidated report, with checklists for system logs, dumps, qrfc / trfc's. As Technical monitoring is giving these info separately.
   b. Options in technical monitoring are too many and not sure which can deliver what i am looking for.
          a. IT Performance reporting
          b. Service level reporting
          c. SDCCN Reporting.
          d. or automatic configure reporting.
   c. The report has to be generated periodically only once in a day. It should not be alert monitoring that an system alert triggers a mail and management is bombarded with too many mails.
Any valuable suggestion will be very helpful and will certainly be rewarded.
Thanks
Abhijeet

Hi Jhansi,
few things first, I have really liked your blogs and forum discussion on Sol Man. They have been really very helpful.
Now, after spending around 2-3 days on it, Closest bet is "IT Performance reporting". With this i am compromising with consolidated report. (Just hoping management agrees for it )
But here is the new challenge I am going through. It is the web templates to use for specific checklist.
I used below link.
http://help.sap.de/saphelp_sm71_sp05/helpdata/en/3f/ecbef23769488f806177717adee541/content.htm?frameset=/en/a3/074aa01bbe4662b99bc20ec5263cf8/frameset.htm&current_toc=/en/81/6f8fe54f854ef2bd412c8660f5ed6e/plain.htm&node_id=463
I need template for System logs, qrfc, trfc, PI messages etc. It is not present in the link provided. Even searched on SMP, it was not available. Can we manually create and use the web templates.
Also when i used such templates, I am getting following error message in the monitoring
Let me know your inputs.
Thanks
Abhijeet

Automate SAP System Health Checks using eCATT

Hello Mates,
Can somebody throw light on the possibility of Automating SAP System Health Checks Using eCATT ?
Are there any readily available scripts within? If so from which version of SAP? or, have they to be custom developed?
Thanks in advance for your time and responses.
Best regards, MAN0J

Hi manoj,
Examine this ozz note:
131561
see this links
http://www.sap.com/asia/industries/pdf/auto_fin_HC%20Customer%2026jun.pdf
http://whitepapers.silicon.com/0,39024759,60044324p,00.htm
thanks
karthik

System Health Checks Utilities

Hi Linux Gurus,
I need to understand some of the outputs of basic system health checks utilities - vmstat, netstat, iostat. As DBA point of view when I run any of the above utilities - what things I should look for. How can I know, the network traffic is high or network is not performing properly by using netstat. How can I know that the system I/O is high. Also I saw that there are many flags for these utilities which are very helpful to format or limit the output to a certain extent.
I will really appreciate the help on this topic.
Best Regards
-Samar-

Hi Samar
A graphical tool like sourceforge.net/projects/xosview/ can make a part of the job, otherwise does oracle the OS Watcher (OSW) is a set of scripts that continually run in the background, collecting information about: Processes I/O Memory Network
OS Watcher user’s guide in MetaLink note 301137.1
Hope this helps.
Regards,
Hub

System Health

Hi All,
I need to know the step by step procedures to do the system health check-up in SAP.
like the following points is very much required
1) Modified supplier master details in particular period.
2) Modified customer master details in a particular period.
3) No of cancelled transaction details.
4) Long pending sales order details, it means order has been booked on 10 days before but not yet delivered.
5) User wise transaction entered details for the specific periods.
Thanks
N Prem Anandan

I am also having problems with the new Lenovo Solution Center.
The Thinkvantage button wich used to work great in conjuntion with the Thinkvantage Toolbox does not work with LSC.
With the Thinkvantage Toolbox the mainscreen was clear: you took a glance at it an you knew if there were any problems.
The Solution Center is chaotic the menu structure isn't as well thought out as it was in the Toolbox and the animations and the use of colors make it look like a circus instead of a business tool.
i've already adressed my concerns in this topic:
Introducing Lenovo Solution Center (LSC)
I thought i was the only one having problems with LSC.
Lenovo shouldn't be cutting corners, you pay a premium to own a thinkpad, you wan't premium tools. Not this cheap, non-functional "tool".
Thinkpad® T430 | Intel® Core™ i7-3520M | 8GB HyperX PnP DDR3-2133MHz | Nvidia® NVS™ 5400M | 256GB Plextor® M5 Pro

System health log file

I have a set of SQL server system health log file that I would like to examine but can't read them in Management Studio. How can I open these log file, the file extension is .xel?
thank you;
Saeed

Hello ,
Best practice to use the extended sessions to capture the health information and save it to a file that is located outside of SQL Server. Therefore, you can still access it if there is a failure. The following example saves the output from an event session
to a file:
CREATE EVENT SESSION [diag]
ON SERVER
ADD EVENT [sp_server_diagnostics_component_result] (set collect_data=1)
ADD TARGET [asynchronous_file_target] (set filename='c:\temp\diag.xel')
GO
ALTER EVENT SESSION [diag]
ON SERVER STATE = start
GO
below reads the extended session log file:
SELECT
xml_data.value('(/event/@name)[1]','varchar(max)') AS Name
, xml_data.value('(/event/@package)[1]', 'varchar(max)') AS Package
, xml_data.value('(/event/@timestamp)[1]', 'datetime') AS 'Time'
, xml_data.value('(/event/data[@name=''component_type'']/value)[1]','sysname') AS Sysname
, xml_data.value('(/event/data[@name=''component_name'']/value)[1]','sysname') AS Component
, xml_data.value('(/event/data[@name=''state'']/value)[1]','int') AS State
, xml_data.value('(/event/data[@name=''state_desc'']/value)[1]','sysname') AS State_desc
, xml_data.query('(/event/data[@name="data"]/value/*)') AS Data
FROM
SELECT
object_name as event
,CONVERT(xml, event_data) as xml_data
FROM
sys.fn_xe_file_target_read_file('C:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\Log\*.xel', NULL, NULL, NULL)
AS XEventData
ORDER BY time
Ref
Also you can see the article :https://www.simple-talk.com/sql/database-administration/database-properties-health-check/
Ahsan Kabir Please remember to click Mark as Answer and Vote as Helpful on posts that help you. This can be beneficial to other community members reading the thread. http://www.aktechforum.blogspot.com/

T400 thinkvantage system health and diagnostics reading memory speed as 667 not 1066

Hi, just got a T400 2765-T6U (fresh install win 7 IBM genuine install) on ebay and it is listed as having 3gb of DDR3 PC-3 8500 1066 ram. but when I run the thinkvantage system health and diagnostics program the scan says: memory DDR2 667 Mhz.
I am certain that the installed ram is DDR-3 8500 because I looked at it.
My concern is that for some reason even though the computer has the faster memory it is not running at the 1066 clock speed.
PS >I cant install any other software because I am returning it to the seller as it has a bad spot on the screen. He is offering a replacement but it will be an exact replacement so I really need to know why this reading is incorrect. I may ask for cash back.because of this reading. I dont understand why the thinkvantage system health and diagnostics is saying DDR2 667 Mhz and not DDR3 1066 Mhz (which IS installed)..
Is the Thinkvantage program giving me a false reading?
Is there anywhere else in the compuer OS that I can see the memory details and clock speed?
The Bios only shows the amout of Ram.
Thanks!

use HWinfo32 to check the ram speed.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Labview 2010 randomly restarts computer - windows event viewer points to nap agent

When running my current VI that I am working on, the computer will ranomly reboot. There is no freeze, or blue screen, just a reboot. When examining the windows event viewer after the reboot, the following warning is listed immediately preceding the reboot:
Event ID 39
The Network Access Protection Agent was unable to determine which HRAs to request a health certificate from.
A network change or if GP is configured, a configuration change will prompt further attempts to acquire a health certificate. Otherwise no further attempts will be made.
Contact the HRA administrator for more information.
Previous to getting this warning before a reboot, I was getting the following error:
Event ID 10016
The application-specific permission settings do not grant Local Launch permission for the COM Server application with CLSID
{24FF4FDC-1D9F-4195-8C79-0DA39248FF48}
to the user NT AUTHORITY\SYSTEM SID (S-1-5-18). This security permission can be modified using the Component Services administrative tool.
This is a DCOM service eror and the CLSID is referring to NAPAGENT. So I configured DCOM to allow the NAPAGENT to start and now I get the Event ID 39 warning and still get the reboot.
I am not sure why labview is even asking for DCOM or NAPAGENT to start at all. My VI is simply reading information from two serial instruments.
This reboot behavior does not occur when the computer is not running labview.
I am attaching a copy of the main VI, if it will be helpful I can post the sub VI's as well.
Thanks in advance for your help.
-Justin Lee
Attachments:
testscan10.8.vi ‏179 KB

Hi Joe,
Thanks for the reply.
I am running windows XP pro service pack 3.
I am running a standard instal of labview 2010 with the latest VISA drivers, no other modules or options installed.
I am only reading and writing to the serial ports (com) in my code. I don't believe that virus/spyware/malware is to blame for several reasons.
1. This only occurs when running this VI in labview.
2. I have replicated this problem on another computer.
3. I am behind a government (DOE) firewall and virus scans and checks are performed constantly.
4. If I take out the serial portion of my code via a T/F case structure, it will not crash.
The code will run fine for sevetral hours sometimes and then crash, other times it will crash after only a few minutes.
Please let me know what other information you require.
Thanks!
Justin Lee

Windows Operating System Health Status Not Monitoring

Hi, I have installed SCOM agent to all my servers (Picture attached) and found some windows server not report health status and also i have already Installed Windows server Monitoring pack
I have run below list troubleshooting step but no luck on this
1. Flush agent cash and try refresh the agent
2. remove agent and wait for 3 days and install agent again
3. remove agent clear registry, re installed
but the result is same, even scom server itself windows health services show as not monitored,
Could anyone help on this
<< picture attached >>

Hi,
Did you import the below management pack for Winddows Server Operating System?
https://www.microsoft.com/en-hk/download/details.aspx?id=9296
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

Syspolicy_purge_history - Step3 - Erase Phantom System Health Records. - FAILS.

Hello, recently uninstalled all of SQL 2008 Shared features components in leaving just the SQL engine intact.
Afterwards notice the syspolicy_purge_history job has been failing at Step3 mentioning:
The process could not be created for step 3 of job 0x6F6178461B7373468A20C1DB8A6F5C83 (reason: The system cannot find the file specified). The step failed.
Does anyone know how this can be fixed?
Thanks in advance.

Hi techresearch7777777,
The error could be caused by that the SQLPS.exe file cannot be found. Please perform the below steps to troubleshoot this issue.
1. Execute the following statements to check the location of SQLPS.exe file.
SELECT * FROM msdb.dbo.syssubsystems WHERE start_entry_point ='PowerShellStart'
2. Verify the 'SQLPS.exe' file is located in the path as per step 1.
3. If you cannot find the SQLPS.exe in the path above, search for SQLPS.exe on the server.
a. If the SQLPS.exe file exists on the server, correct the path recorded in the msdb.dbo.syssubsystems table by using the following statements, then restart SQL Server Agent Service and check if there are some issues with syspolicy_purge_history
job.
Use msdb;
GO
sp_configure 'allow updates', 1 ;
RECONFIGURE WITH OVERRIDE ;
GO
UPDATE msdb.dbo.syssubsystems SET agent_exe='<full_path>' WHERE start_entry_point ='PowerShellStart';
GO
sp_configure 'allow updates', 0;
RECONFIGURE WITH OVERRIDE ;
GO
b. If the SQLPS.exe doesn’t exists on the server, I suspect that it has been uninstalled. In order to obtain SQLPS module , you need to install the SQL Server 2008 Feature Pack.
Thanks,
Lydia Zhang
Lydia Zhang
TechNet Community Support

Office 365 App using NAPA - "The system cannot find the file specified. (Exception from HRESULT: 0x80070002)"

Hello,
I am creating an app using NAPA tool in Office 365. I am trying to "Add an attachment" to a custom list item using SPServices. When I am using my code (jquery code) in content editor web part on a page, its working fine, but when I am adding
the same code in an app, its giving me error : "The system cannot find the file specified. (Exception from HRESULT:
0x80070002)" - 500 Internal Server error.
(function () {
// This code runs when the DOM is ready and creates a context object which is
// needed to use the SharePoint object model
$(document).ready(function () {
//alert('In doc ready');
$('.attachmentButton').change(function(event){
var listName = 'UploadTest',
itemId = 2;
handleFileChange(listName,itemId,event.target.files);
function handleFileChange(listName,itemId,files){
alert('In handleFileChange :=' + listName + "" + itemId + "" + files[0]);
alert('files.length :=' + files.length);
var filereader = {},
file = {},
i=0;
//loop over each file selected
for(i = 0; i < files.length; i++) {
alert('In for loop');
file = files[i];
filereader = new FileReader();
filereader.filename = file.name;
alert('filereader.filename :=' + filereader.filename);
filereader.onload = function() {
var data = this.result;
var n=data.indexOf(";base64,") + 8;
//alert('n :=' + n);
//removing the first part of the dataurl give us the base64 bytes we need to feed to sharepoint
data= data.substring(n);
//alert('data :=' + data);
alert('Above SPServices this.filename :=' + this.filename);
$().SPServices({
operation: "AddAttachment",
listName: listName,
asynch: false,
listItemID:itemId,
fileName: this.filename,
attachment: data,
completefunc: function (xData, Status) {
console.log('attachment upload complete',xData,status);
alert('Status :=' + Status);
if (Status.toLowerCase() == "error"){
alert(xData.responseText);
alert(xData.status);
alert(xData.statusText);
filereader.onabort = function() {
alert("The upload was aborted.");
filereader.onerror = function() {
alert("An error occured while reading the file.");
//fire the onload function giving it the dataurl
filereader.readAsDataURL(file);
alert(xData.responseText); - gives error - " "The system cannot find the file specified. (Exception from HRESULT: 0x80070002)""
alert(xData.status); - gives error - "500"
alert(xData.statusText); - gives error - "Internal server error"
Server Publishing infrastructure and Server publishing features are activated on site collection and site respectively.
Any suggestions, why I am getting this error in NAPA ?

Hi,
According to your post, my understanding is that you have an issue about adding attachments to list items in app.
To add attachment to list item in the host web, we should first get the list and the list items from the host web, then add the attachments to the list items.
There are two articles about retrieve the list and list items in the host web, you can refer to them.
http://www.dotnetcurry.com/showarticle.aspx?ID=1028
http://www.c-sharpcorner.com/UploadFile/93cb27/retrieve-sharepoint-app-host-web-list-items-in-sharepoint-ho/
What’s more, we can also use the REST API to achieve the same scenario.
http://www.c-sharpcorner.com/UploadFile/472cc1/add-attachments-to-list-items-in-sharepoint-2013-using-rest/
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

NAP Agent - System Health Agent

Similar Messages

Maybe you are looking for