Narration records normal speed in Photoshop organizer but too fast in Photoshop elements slideshow?

Narration records normal speed in Photoshop organizer when you attach to a photo however it records too fast in Photoshop 8 elements slideshow?
Any ideas as to why or fix?

Similar Messages

Elements organizer scrolls too fast and jumps when an image is selected?

Why does elements 12 organizer on new mac scrolls too fast and jumps all over?

I have found this to be a problem as well. Like other products, the scroll speed should start slow, and only speed up if the user moves the cursor further outside the panel.
Vista on Dell XPS 710.

Recorded video is not natural and runs too fast.

Hi,
I am facing one of the very strange problem with my cameras and I am not sure whether some unintentional setting is causing that.
When I record the video and try to play it the video does not look natural and runs too fast like 5 min video finishes in 3:20 minutes.
Any ideas what may cause this as until now it was working fine?
Thanks and regards,
Sanjay.

Hi, My name is Eric Moyers. I am a Network Support Engineer in the Cisco Small Business Support Center. Thank you for using the Cisco Community Post Forums.
What wre you using to playback the recorded video? If it is the video monitoring software from Cisco, what is the version number?
Thanks
Eric Moyers
Cisco Network Support Engineer
SBSC Wireless and Surveillance SME
CCNA, CCNA-Wireless
1-866-606-1866

In photoshop elements 12 i try to select multiple people to view in organize but can only select one

in photoshop elements 12 i try to select multiple people to view in organize but can only select one person at a time. if I try to select two or more people to see their pictures, I get nothing. I try to use CTL-click, but that does not work

Hi,
Try switching to Media view and then go to Find -> By Details.
Set the field to People and select the persons name.
You add further people by clicking on the + sign
The two options above the search criteria allow you to select all photos containing at least one or only ones with all of your selections.
The search can be saved in case you want to repeat it a later time.
Hope that helps
Brian

Uploaded video plays at twice normal speed, but audio plays normally

I am able to upload video from Panasonic Lumix camera to iMovie08, but video plays back at twice normal speed. Meanwhile, audio plays back at normal speed. I posted a video on iTunes just to see if the problem remained and it does. How do I fix this so video plays at normal speed?

Like I say, there are two 24 modes on that camera. Is your sequence set up for 24fps or 29.97? Whichever one it is, try the other and see if it makes a difference.
What were your capture settings? You need to clarify that you've captured correctly (I'm not sure whether it's possible to capture 24fps material incorrectly as I've never tried).
The basic thing you need to do is determine whether you shot native 24 or 24 converted in camera to 30, and work forward from there.
You might find more experts on your camera and its settings over at [www.dvinfo.net]

Register Applications photoshop CC Lightroom 300 baht per month Creative Cloud desktop install and load the program into Lightroom down normally open normally, but the work load photoshop program installed. Open access Like we use it to fill a 30-day tr

Register Applications photoshop CC Lightroom 300 baht per month Creative Cloud desktop install and load the program into Lightroom down normally open normally, but the work load photoshop program installed. Open access Like we use it to fill a 30-day trial version, serial no.

1) WHAT if I juse JUST ONE Adobe program pretty often?
They have a single use subscription for $20/mo. Similar to upgrading extended version every 1.5 years.
2) WHAT if I created projects like 2 months ago and I didn't use Photoshop for a full month. Who assures us that with the CC series the projects are opened with the old CS ones?Or don't use it every day?
Same problem if you own it. If upgrade price is $400 every 1.5 year that is same as $16/month. You can choose not to update and version will be same as when you last used it.
3) WHAT if I don't use Adobe 24/7? and 5) Making an day-based subscription?? Same problem if you own it. If upgrade price is $400 every 1.5 year that is same as $16/month.
4) Adobe, do you think to be the only one making these softwares?
Competition is always a factor in market.
6) After all this mess, you discriminate Europeans, too?
Taxes charged by Governments and municipalities are not controlled by Adobe.

Copied slow motion video from iphone 5s to my pc but play at normal speed - how play in slow motion?

Copied slow motion video from iphone 5s to my pc but now play at normal speed - how play in slow motion?

You have to email it to yourself to preserve the slow-motion effect.

How to play 100fps at normal speed?

Hi folks
I have material which the DOP says is shot at 100 fps. (Shot on Sony fs700). I want to play that at normal speed in my 1080 25p FCPX Project. By normal speed I mean real time.
What bugs me is that in the clip info in FCPX the material shows as 1080 25p material. I've tried speeding up the material to 400 %, but it doesn't look right. Too fast. Is there any other way other than to mess around with speed %?
Hope you can help.
All the best
Lasse

Karsten, you seem to have struck a chord. It seems there's a difference between what the DOP says and what the iMediaHUD says (clever tool, cheers for that). See report below.
Karsten wrote:
And one thing irritates me:
If I read the cams manual correctly, it records in AVCHD - so, how did you convert it to mov?
When I import it, FCPX doesn't let me 'leave files in place" - I'm able to tick the box, but FCPX stil copy it. And when I click to reveal the material in finder the "original material" is now .mov.
For the report I dragged the real original material. I took an .mts file from the AVCHD bundle and this is what the report wrote:
General
ID                                : 0 (0x0)
Complete name                    : /Volumes/Ring til Ramasjang - klippedisk/RaÌoptagelser/Optagelser_121214_nÃ¦re/private/AVCHD/BDMV/STREAM/000 38.MTS
Format                            : BDAV
Format/Info                        : Blu-ray Video
File size                            : 123 MiB
Duration                            : 46s 265ms
Overall bit rate mode                : Variable
Overall bit rate                    : 22.2 Mbps
Maximum Overall bit rate            : 24.0 Mbps
Video
ID                                : 4113 (0x1011)
Menu ID                            : 1 (0x1)
Format                            : AVC
Format/Info                        : Advanced Video Codec
Format profile                        : [email protected]
Format settings, CABAC                : Yes
Format settings, ReFrames            : 2 frames
Codec ID                            : 27
Duration                            : 46s 280ms
Bit rate mode                        : Variable
Bit rate                            : 21.1 Mbps
Maximum bit rate                    : 22.0 Mbps
Width                            : 1 920 pixels
Height                            : 1 080 pixels
Display aspect ratio                : 16:9
Frame rate                        : 25.000 fps
Color space                        : YUV
Chroma subsampling                : 4:2:0
Bit depth                            : 8 bits
Scan type                            : Progressive
Bits/(Pixel*Frame)                    : 0.406
Stream size                        : 116 MiB (95%)
Audio
ID                                : 4352 (0x1100)
Menu ID                            : 1 (0x1)
Format                            : AC-3
Format/Info                        : Audio Coding 3
Mode extension                    : CM (complete main)
Format settings, Endianness            : Big
Codec ID                            : 129
Duration                            : 46s 304ms
Bit rate mode                        : Constant
Bit rate                            : 256 Kbps
Channel(s)                        : 2 channels
Channel positions                    : Front: L R
Sampling rate                        : 48.0 KHz
Bit depth                            : 16 bits
Compression mode                : Lossy
Stream size                        : 1.41 MiB (1%)
Text
ID                                : 4608 (0x1200)
Menu ID                            : 1 (0x1)
Format                            : PGS

On my iPhone 4, people cant hear me when I make and / or receive normal (GSM) phone calls. But when on calls using internet based / native apps like viber or skype, people can hear me just fine. Voice memos work too and have already tried different SIMs

On my iPhone 4, people cant hear me when I make and / or receive normal (GSM) phone calls. But when I make/receive calls using internet-based / native apps like viber or skype, people can hear me just fine. I have tried recording my voice using voice memos - this works. And have already tried different SIM cards but the problem persists.
I have taken my phone to an authorized Apple service center, where they restored my phone to factory settings, but still facing the same issue. They service center directed me to Apple Customer Care Hotline, where I have now spent 3+ hours explaining my issue and yet no one can resolve it. The easy answer if to replace the phone - and since it is out of warranty, I am expected to pay for it.
Additionally, the customer service has been so rude and confrontational that it has completely changed my view of Apple and its customer focus. I am a disappointed and angry customer today - people would be surprised to hear just how rude customer service was including making statements such as "Apple doesnt make infallible products, that's why warranty is needed for our products" and that "every product undergoes a problem at some stage, so do ours!" There goes whatever confidence I had...
My concern is simple - if no one at Apple and / or its CS hotline is able to address my issue comprhensively and keep telling me that they have never encountered a precedent before, then with what right can they expect me to pay for a replacement?! I am NOT here to fund Apple's research into their product faults and manufacturing.
And even though a customer is out of warranty, is it too much to expect an Apple product to work well for at least a 'reasonable' period of time. My phone is less than 18 months old and has been facing this issue for the past 2 months - surely the longevity of Apple products is more than 18 months!
Just a sad sad day for an Apple customer, compounded by unjustifiably rude and aggressive staff. And still no resolution to my problem.

I am having the same issue - with my last 2 iPhone 4's. My first handset each time I was on a call wether it was up to my ear or on loud speaker, the call would automatically mute even though the mute button wouldn't show up as highlighted. Pressing the mute button on and off during the call doesn't fix it either. I rang Apple and asked what some of their trouble shooting solutions were. I got told that it might be a software issue and to install the latest software update. This failed. I then got told to uninstall the software on the phone and do a complete restore. This also failed. After trying the troubleshooting suggestions, I took the phone into my provider and they sent me out a new phone within a week under warranty claiming it was a hardware issue and probably just a "glitch" with that particular phone. This was not the case....
After receiving my second iPhone 4, I was hopeful that it would work. For the first couple of days, making/receiving calls was not an issue. Until after about a week, the same problem started again. In one instance I had to hang up and call back 4 times and the call would still automatically mute after about 5 seconds. Also on the second handset, the main camera located on the back of the phone has red and blue lines running through it and can't take a decent picture. So back to the store I go to get another replacement - Again.
For a phone that is rated highly and as a keen Apple product purchaser, I am a bit disappointed with the experience I have had with the iPhone 4. Let's hope they find a fix sometime soon because this is becoming a bit beyond a joke.....!!

No startup: blank screen, power light on, fans normal speed

iMac G5 2.0GHz, 2GB RAM, 160GB HD, OSX 10.5, 17". Bought in October of 2005. Two matched Samsung 1GB RAM chips installed quite some time ago with no problems.
While it isn't the iSight model, my iMac has done the blank screen with fast spinning fan thing a few times, but it always recovers after I turn it off. Here's what happened:
iTunes is playing, I pause it using the Play/Pause button on the new wireless aluminum keyboard, it sits for a while and the screensaver comes on. I press the Play/Pause button on the keyboard again, the screensaver freezes and the fans spin up to maximum speed. I hold the power button down, it shuts off, I turn it on again and get nothing. It now powers up to a blank screen, fans at normal speed, the power light stays on, and the CD drive never makes its little startup noise. Holding the power button down does nothing, I have to pull the power cable out to turn it off. The only thing it has done differently since this happened is one time the power light didn't come on, otherwise no change. I also tried all of the different key combinations on startup (using the USB keyboard) and get no response, so no target disc or safe modes. Also, the CD drive won't accept any discs, so I can't start from the system discs.
I don't want to pay for any expensive or major repair work since I was going to get a new iMac this Fall anyway. If anybody has any clever do-it-yourself tricks I'm wide open to them. Otherwise it looks like I'll just get a hard drive enclosure kit and get all of my stuff off that way.
Help please!

First, you may still be eligible for one of Apple's Repair extension programs also, try resetting the SMU.
Let us know what happens,

Can't open PDF-Files with the 64Bit Photoshop-Version but with 32Bit Version

Hello,
our company use Photoshop in combination with PDF-Files. Normally we can open every of our PDFs with Photoshop.
But now we have some PDFs that we can't open with the 64Bit version. If we try it the application crashes.
But we are able to open the same files with the 32Bit version of Photoshop. We assume a bug in the 64Bit Version.
Please contact me to get the a PDF-Sample-File because i am not allowed to append the file to a public space.
Regards
Carsten Evers
PS: email: [email protected]

Hi Carsten,
I'll move this to the PS forums on your behalf for further assistance.
Cheers!
-Sidney

Thumbnails for HD videos not appearing in Photoshop Organizer

How do I get thumbnails to appear in .mts (Canon HD) videos in Photoshop Organizer (bundled with Photoshop / Premiere 8?

Hello A.T. Ramano,
     First and foremost I would like to take you in advance for any and all help. I will try to answer your question to the best of my abilities but please remember I'm not all that technically savvy in these matters.
1.     Elements Organizer is version 8.0. Premiere Elements is version 8.0. I've tried to down load the update but get a message that is already installed. Not to sure what you ment by sourse, unless you're wanting to know that Premiere was installed via DVD disks.
2.     File extension for HD video files is (.mts).
3.     The camera is a Canon Vixia HF S20.
4.     I'm not sure where to look for compression levels. Video quality is set at the highest level on the camera (MXP).
5.     Thumbnails show up in the Premiere elements organizer (sometimes), but never in the Elements Organizer.
6.     Haven't tried downloading the trial version of Premiere 9.0, that's next. If that doesn't work was thinking about uninstalling Premiere 8.0 and re-installing it.
7.     QuickTime Player is version 7.6.9.
8.     Windows Media Player is version 11.0.6002.18311.
9.     Pixela Image Mixer 3SE player is version 6.0.1. Tried to update all three players and received a message that players were up to date.
10.   Video is shot in 16:9 mode, Super Fine / 1920x1080, Cinema Mode progressive frame rate of (PF24).
11.   Computer is a Dell Studio XPS laptop, Intel Core 2 Duo CPU P8600 @ 2.40 GHz, 4.0 GB of ram, Windows Vista Home Premium 64 bit operating system service pack 2, ATI Mobility Radeon HD 4670 video card with 1GB of on board ram.
If there is other information you require, please don't hesitate to ask, Thank you again for your help.
Sincerely,
Mike

How can I get tracks to play faster than normal speed in itunes?

I have lectures, audio books, and other recordings that I would like to play at faster than normal speed (like 1.5X or 2X normal speed).   I've set all of these recordings as audio books because I read that they have the option to play faster, but, I can't find how to actually make them play faster. I also read that it's possible to open them in quicktime, but that is very much less than ideal and a waste of time. Surely there is a way to do this in itunes, but I can't figure it out.
Thanks for any help.

I will show you how I played my audio or mp3 files at any particular speed. This method will allow you to simply enter in your desired speed.(ex. 1.5 or 1.33)
In my case Im using an audio book [Lord of the flies] I download off youtube as a MP3 file using this program:
http://download.cnet.com/MediaHuman-YouTube-to-MP3-Converter/3000-2140_4-7544580 3.html
      First off, you will need to make sure your audio file is open in QuickTime player rather then iTunes. First you need to locate the audio file. If your audio file is in itunes then right click the file and select "Show in Finder"
     The file should open in a finder window, highlighted. Right click the file, go to "Open With.." And click Quicktime Player. (If quickTime Player is not an option, you need to go to "Other..." and select QuickTime Player from your Applications folder)
Now that your mp3 file is open in a QuickTime window you may proceed to step 1.
1) Open Finder
2) Click Applications
3) Click Utilities
4) Open AppleScript Editor
5) In the program copy and paste the script below.
6) Click "Compile"
7) Now to test this script, click "Run" A window should pop up prompting you to enter your desired speed (default is 1.5)
8) press "OK" and quick time should start playing your audio at the speed you entered in.
9) If you would like to use this script again, go to File > Save... >Name your AppleScript and save it Anywhere (I saved mine in the Music Folder for easy access)
tell application "iTunes"
pause
set myTrack to location of current track
# the player’s position within the currently playing track in seconds
set mySeconds to player position
end tell
# show a Dialog
set SpeedFactor to 1.5
display dialog "Enter speed factor:" default answer SpeedFactor
set SpeedFactor to text returned of the result
tell application "QuickTime Player"
activate
# pause all previously opened documents
set open_docs to documents
repeat with doc in open_docs
pause doc
end repeat
# open the track just played in iTunes
open myTrack
# get the 'QuickTime' document, MyTrack should be equivalent but it isn't
set MyMovie to first document
# rewind by 10 seconds
if mySeconds > 10 then
set mySeconds to mySeconds - 10
end if
# set current time
set current time of MyMovie to mySeconds
# set Speed Factor and start playing
set rate of MyMovie to SpeedFactor
end tell

Log and Transfer results in video twice the normal speed

I'm working with a Panasonic DMC – TS2 which is AVCHD. I just want to use the log and transfer to pull the video off the card and into final cut express but when I do the video is (compressed?) into half it's normal speed but the audio is not. So for example I have a video clip that is 1:11:33 in length and when I pull it in it is 35:45 and the audio does not match up at all and everything is sped up in the video. I have searched extensively through the forms and online and I am totally stumped. How do I get the video pulled over normally?

Streamclip is free and does a fine job.
The trick with Streamclip is to setup the _Export to Quicktime_ to match exactly the properties of the FCE Easy Setup selected.
The Easy Setup governs the Timeline settings.
FCE loves to have the clips entered into the Timeline matching the clips, then, there will be no constant rendering issues or other grief.
http://www.squared5.com/
Al

Registered Photoshop CS2 but have not received complimentary benefit as mentioned

Recently I registered Photoshop CS2 product I bought in 2005, and as mentioned in the adobe leaflet documentation that came with the software there is a complimentary benefit after registration of either a free Garamond Premier Pro Font, 2 Free issues of Photoshop User, a Layers magazine, or 60 minutes of additional video training. While I assume I registered the software previously I registered again, but did not receive a link to the complimentary benefit via email. I save all my photoshop files, but as I do not have the compilmentary benefit as mentioned above on my PC, I would appreciate any info on receiving it.
Regards
Je112

My thinking is that it is too late for the benefit. All you can do is call cutomer support and see if they will honor it. But they would have to go back in their records four years just to find out. For all I know they could keep all their old records in a warehouse someplace. So they may just feel generous and give you the benefit or say your out of luck.

Narration records normal speed in Photoshop organizer but too fast in Photoshop elements slideshow?

Similar Messages

Maybe you are looking for