Nas drive does not recalculating space after deleting files on Nas Drive??

Greetings to Respected expert,
Actually we have configure Window server 20082 Storage server.We have NAS drive configured which have 300GB quota limit. The actual data in the folder is 185 GB but it shows only 15 GB free and shows a warning .Please assist me why NAS server does not re-calculate
the space after deleting files or does not leave space. Pardon me if I am not able to clear you my problems.this is very urgent for me.
Thanks And Regards
Rajnish Singh

Hi Rajnish,
As you mentioned "quota limit", it is set via FSRM or specific function on NAS?
Meanwhile could you confirm the number 185GB is accurate? Sometimes a part of used space is just not calculated. You can confirm with checking the total space on NAS locally.
If the number is correct and quota is set via FSRM, check if it is the Disk Quota which not re-calculated the released space. Try to clear the Quota setting and reconfig with 300GB limitation and see if issue still exists.
If you have any feedback on our support, please send to [email protected]

Similar Messages

/dev/shm not release space after delete file.

when I remove file from /dev/shm, the available space of shm still not increase.
Is it having a command for shrinking shm ?

http://www.linuxquestions.org/questions … on-806387/
Edit: Even the wiki has a thing or two on this subject https://wiki.archlinux.org/index.php//dev/shm
Last edited by karol (2011-05-29 10:22:27)

Exfat drive does not free up space after deleting files

My external exfat formatted drive does not free up space after deleting files using a mac....however if I delete files using a PC, it will free up space.
I've even tried the *erase free space* using Disk Utility, but nothing.....
Thoughts/Suggestions??

Thanks for the suggestion.
I ran WhatSize and here is the result. Oddly, it says there is 40.2 GB used (in the top-left) which conflicts with the information directly below it: "Capacity 108 GB, Used 103GB, Available 4.27 GB". Not so helpful.
Disk Inventory X solved the problem, however. Much thanks! I wasted most of my weekend troubleshooting this sad issue. Anyway, Disk Inventory X revealed a bug where my external hard drive for photos was still appearing as a mounted volume, even though the HD was no longer connected. Freaky.
After moving it to the trash and deleting it, I've recovered the space.
Again, thanks! Contact me if you're curious about the details, as this might help you diagnose similar problems in the future.
- Mike

Ibook g3 hard drive does not show up after new installation

I have an older ibook g3. I purchased a 20gb hard drive to replace the dead 10gb hard drive that came with the computer when I bought it new. The installation was fairly easy. After the hard drive was installed and everything was put back together I turned on the computer and loaded the install disk into the cd tray. The new hard drive does not show up in order to install the operating system. What do I need to do in order to get the hard drive to show up?
Scott

Hey Scott,
The new hard drive does not show up in order to install the operating system. What do I need to do in order to get the hard drive to show up?
When you're in the installer go up to the top menu bar under utilities? or tools? and start up disk utilities. See if you see the hard drive there. If so it might not be formatted correctly so erase it and format it for your install (usually Mac OS Extended (Journaled). That should make it show up.
Richard

External HD won't free-up space after deleting files

Hello. My old Maxtor 500 Gb external hard-drive won't free-up any space after deleting many, many files. I'm using a late 2009 iMac i5 desktop with Snow Leopard. I had 6 Time Machine backups of my old MacBook Pro on the drive - each taking up roughly 70-80 Gb of space. I deleted 3 of the Time Machine backups as they were close enough in date to other backups so I wasn't going to lose any data. This should have freed up more than 200 Gb of space on the external hard drive. However, the hard drive still shows having only 10 Gb of space available. I deleted the Trash from the Dock. The Trash is empty. I unmounted the hard drive, turned it off and reconnected it. I restarted the computer. Still no change. Please help me. Thanks!

Welcome to Apple Discussions-
Are you using FileVault? If so, you have to log out or restart in order for the disk space to be reclaimed.

Freeing space after deleting files

Has anyone tried to free the LOB space after deleting a file? We've been using the aging feature but none of the space utilized by files that have been migrated to disk was freed after the file was moved to BFILE.

Hi,
there is old posting from you,
Questions with Third-Party Access Management Systems
I am trying integration of Oracle SSO and Oracle EBS but headers are not reaching in custom java file. Would be very thankful if you could help
thanks in advance.
prakash

Adobe After Effects CC 2014 Multi-machine rendering does not create RCF after Collect-File

This was working in the previous release. After going through all of the steps to perform a multi-machine render, not only does it say it is limiting it to 5 machines instead of the usual 99 (and I have over 100 cores on the render farm) but "Collect Files" (File/Dependencies/Collect Files) does not create the Render Control File (RCF) that kicks off the process on the other machines, like it did before and is supposed to do.
This release was supposed to fix the 32 core limitation on render nodes (my server has 48), but now does nothing at all.
Anyway, I assume there is a check box somewhere that says "do something" that hasn't been checked and another that says "Maybe my machine has more than 5 cores", and I would appreciate being steered in the direction of these new mis-features.
Just as background, the 48 core server does show the little TV screen that monitors the watch folder, and I know for a fact that process looks for the "RCF" file. Looking at the directory specified for "collect files", I can see that no RCF file is created, only 1 file, a report.txt file which contains this information is produced:
Report created:
7/9/2014 1:54:12 AM
Project name: highup.aep
Source files collected to:
P:\temp\highup folder
Source files collected: All
Collected comps:
Thomas Falke - High Again High On Emotion)
Number of collected files: 1
Size of collected files: 63.4 MB
Collected source files:
C:\Users\Jeff K\Videos\Down\2014-2015\Thomas Falke - High Again High On Emotion).mp4
Rendering plug-ins:
Classic 3D
Effects used: 1
Effect: Detail-preserving Upscale

The dialog box has been slightly refactored. You must click "Allow watch folder rendering" and then all is good. Hope this helps anyone else. Thanks to Rafil at customer support chat for this.

Zfs does not reclaim space after database table dropped

Our Oracle DBA dropped 200GB of tables and zfs has not reclaimed the space. I have made sure we did not have any snapshots. When I do a du -h on the filesystem, it shows the correct space, but zfs list does not show the extra space. Any ideas?

Hi,
You should make sure that the removed Oracle Datafiles were on a ZFS file system. If they were under an UFS file system, the ZFS space will remain unchanged.
Regards,
Rei

Why Oracle Linux 5 cannot recover disk space after delete files ?

Folks,
Hello. When I create a Virtual Machine for Oracle Linux 5 to install EBS R12, I allocate 300GB to the VM. I download EBS R12 Source Files (45.7GB) and unzip the files (46GB). Total size of stage area directory(EBS_R12) is 91.7GB.
Because some files are corrupted and cannot install, I move the folder EBS_R12 into trash but cannot empty trash. I move EBS_R12 from trash back to the directory. Then at root user, use command "rm -rf " to delete EBS_R12 completely.
I shut down Oracle Linux 5 and restart it, 91.7GB disk space cannot recover.
I download some other files into Oracle Linux files and then delete those files, but disk space cannot be recovered either.
It seems that OEL5 virtual disk only can expand but cannot be reduced. The VM disk space is less than 200GB now and not enough to install EBS R12.
Can any folks tell me how to make 91.7GB disk space and some more disk space come up ?

Folks,
Hello. Thanks a lot for replying.
Host OS is Windows 7, Guest OS is Oracle Linux 5 on the top of VMPlayer 3. The VM of Oracle Linux 5 is created on the external USB drive and not on the local hard disk.
There is a directory /tmp/VMwareDnd/376c7cae/EBS_R12 in Oracle Linux 5 file system. I copy/Paste the folder of EBS_R12 from Windows 7 into Oracle Linux 5. All of zip files and unzipped files are placed in the folder of EBS_R12.
After EBS_R12 is deleted, the external USB drive(F:) doesn't come up 91.7GB disk space.
My question is:
Where to run "boot>linux rescue" command ?
Does this command work correctly in the external USB drive ?

Recovering disk space after deleting files.

Hello,
I am used to using Panther and now I'm using Leopard. When I deleted files then emptied the trash and later logged out or shut down it would ask me do I want to recover the disk space on my drive, then once this is finished I could see the more space on my hard drive. I find now that with Leopard I have deleted a lot of old music etc that I copied over and I have emptied the trash but the file space doesn't get reclaimed. So, my question is: does emptying the trash really delete the fills or is there something I need to do additionally to get the disk space back once I delete something.
Thanks in advance for any help.

I have the same problem. I transferred and deleted several gigs of music and photo files but the hard drive is not recognizing the free space. any help would be greatly appreciated. thanks.

Help! My catalog does not reflect moved or deleted files! PE6

I have made a series of changes to the file structure in my folder tree. Now PE6 shows dozens of "ghost files" which are in fact deleted. It also shows several files in the wrong location (they have been moved), but when I tree moving these files (no matter where), I get the error message "File is already at this location". I made a new catalog which does show everything correctly, but I put album tags on 100s of pix, and those have all been lost. You can export/import album tags, but only the categories, not the specific photos.
I've tried "Repair" and "Optimize". How can I get my old catalog to reflect the actual files and locations on my hard drive?
Thanks!
Gary

How can I get my old catalog to reflect the actual files and locations on my hard drive?
The answer is simple.
It can't be done. PSE does not know about, or reflect, changes made outside of PSE.
A better way of using PSE is to assign tags, captions and notes, to achieve organization, rather than moving/renaming photos and folders to achieve organization.

Roaming User sync does not work and/or deleted files on desktop restored.

Hello
We have a customer with MBP's and a Server 10.6. At the MBP is a local Admin Account configured and all the employees have roaming profiles.
Sometimes we have the problem that deleted files and folders at a Desktop will be restored after relogin AND it seems that some Adobe Products prevent syncing sometimes if files at Desktop opened.
Is there any solution for that?

Same issue here.
I have BB 9700 and Yahoo! BIS account. Worked like a charm until about a week ago.
It was even synchronizing my calendar and mail between BB and Outlook 2010 - never really understood how it managed to do that, but I was very pleased.
As of lately our telecom administrator spent hours on the phone with AT&T, Yahoo and RIM trying to resolve this problem. I was told by RIM tech. support that I've got too many messages in the inbox (measly 5000 e-mails) and that BB stops synchronizing after about 800 messages in the inbox, because it is timing out with so many messages to go through. Sounded like a total BS to me, but I still went ahead and cleaned up my Yahoo inbox and no luck, as I suspected. I was also told by tech. support that it is due to my using Outlook 2010 Beta2, which is not supported, hence the issue - another ferry tale, IMHO.
Hopefully, RIM will be able to get us back on track - manually deleting 60 emails every day is extremely annoying.

Disk not showing free space after deleting files?

Hi there. I'm running Mountain Lion 10.8.2. I deleted about 20GB worth of data from my hard drive but when I go into activity monitor and click on disk usage it doesn't show an extra 20GB of space. I did this 2 days ago. Is there something wrong with my hard drive? There is nothing in the trash and I have restarted my laptop twice now. Also, I use Daisy Disk to show my usage and it says the same thing as activity monitor. Thanks in advance!

“You may notice a difference in available space statistics between Disk Utility, Finder, and Get Info inspectors. This is expected and can be safely ignored. The Finder displays the available space on the disk without accounting for the local snapshots, because local snapshots will surrender their disk space if needed."
About Time Machine's "local snapshots" on portable Macs

External drive does not show up after upgrade to 10.8.3

My external drive that has my Time Machine files do not show up on the display after I upgraded to 10.8.3

This did not work. I finally reinstalled OS X. Now some drives will show up. I still have oe that will not. I have two laptops and all of the drives show up on the other machine. My last problem drive is a seagate 1tb.
Right now I have too much other stuff going on to worry about this so I have put it on the back burner.
sig thanks for trying to help.

IPAD3 does not automatically update after deleting a contact from Outlook 2010 over ICloud

I've noticed that when deleting a contact on my IPAD 3, it automatically deletes the contact on my PC (Outlook 2010 set up for ICloud). However it doesn't work or update the other way around.
I can edit an existing contact on Outlook, or add a new contact on Outlook, and that always updates on the IPAD3.. But it doesn't update on the IPAD when deleting from Outlook which is strange.
If I delete all the contacts on the IPAD and then re-sync once again to ICloud, then it is as it should be and any previously deleted PC contacts, do not show on the IPAD.
Any thoughts as to what might be happening?

Hi Kumar,
Please remove the codeline $List.Update();, then run your code again, it works for me.
You may need to firstly delete the synced contacts list within Outlook to remove those undeleted accounts, then re-connect the SharePoint contacts list to outlook, then run your modified Powershell code.
Thanks
Daniel Yang
TechNet Community Support

Nas drive does not recalculating space after deleting files on Nas Drive??

Similar Messages

Maybe you are looking for